S02 Grease Interceptor Specifications.pdf
PDF 695 KB Posted
- Solicitation number
- 36C26325Q1049
About this file
The document contains two specification sheets for grease interceptors from different manufacturers (Zurn and Schier). The Zurn Z1172-UN specification details a large capacity acid-resistant steel grease interceptor with a user notification system, featuring an electronic grease level sensor, display box with power and grease level indicators, and an audio alarm. It offers multiple size options ranging from 900 to 1900 gallon capacities, with flow rates from 75 to 500 GPM and grease capacities from 65 to 1440 lbs. The Schier GB1 specification describes a polyethylene grease interceptor with 20 or 25 GPM flow rates, certified to ASME A112.14.3 standards, designed for indoor, on-floor, or under-sink installations, with multiple outlet options and a pedestrian-rated cover.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| S02 Grease Traps Cleaning Mpls VAMC 36C26325Q1049.docx | DOCX document | |
| S02 Bldg 70 Grease Trap Locations.pdf | ||
| S02 DOL WD 2015-4945 R28 05122025.txt | TXT text file | |
| S02 Bldg 70 Exit Route.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
*REGULARLY FURNISHED UNLESS OTHERWISE SPECIFIED
Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice
ZURN INDUSTRIES, LLC. ♦♦♦♦♦ SPECIFICATION DRAINAGE OPERATION ♦♦♦♦♦ 1801 Pittsburgh Ave. ♦♦♦♦♦ Erie, PA 16514 Phone: 814/455-0921 ♦♦♦♦♦ Fax: 814/454-7929 ♦♦♦♦♦ World Wide Web: www.zurn.com
In Canada: ZURN INDUSTRIES LIMITED ♦♦♦♦♦ 3544 Nashua Drive ♦♦♦♦♦ Mississauga, Ontario L4V1L2 ♦♦♦♦♦ Phone: 905/405-8272 Fax: 905/405-1292
SPECIFICATION SHEET
TAG _______
ENGINEERING SPECIFICATION: ZURN Z1172-UN
Large capacity Acid Resistant Coated interior and exterior fabricated steel grease interceptor, rated at ____ GPM and ___ Lbs. grease capacity, with internal air relief by-pass, bronze cleanout plug and visible double wall trap seal with removable pressure equalizing/flow diffusing baffle.
Gasketed non-skid secured covers with removable lift handles, complete with flow control fitting. Includes encased fiberglass sensor box containing an electronic grease level sensor (specify right or left side)*, a fiberglass display box with one green power light, red grease level light, audio alarm and junction box. Regularly furnished with inlet and outlet in high position.
OPTIONS (Check/specify appropriate options)
PREFIXES
_____ Z Acid Resistant Coated Fabricated Steel* _____ ZS All Type 304 Fabricated Stainless Steel
SUFFIXES
_____ -AL Aluminum Cover _____ -L Angle type (Z1108-L) flow control device.
_____ -PW Plug Wrench
Z1172-UN
LARGE CAPACITY GREASE INTERCEPTOR
WITH USER NOTIFICATION SYSTEM
Size
75 [284] 65 [246] 150 [68] 316 [143] 22-3/4 [578] 18-1/2 [470] 36 [914] 28-5/8 [727] 11-1/4 [286] 100 [378] 110 [416] 200 [91] 408 [185] 27 [686] 23 [584] 42-3/4 [1086] 33-5/8 [854] 16-1/8 [410] 125 [472] 150 [567] 250 [114] 749 [340] 30-1/8 [765] 24-/2 [622] 49-1/4 [1251] 40 [1016] 16-5/16 [414] 150 [567] 195 [737] 300 [136] 856 [389] 30-3/4 [781] 25-1/4 [641] 56 [1422] 41-5/8 [1057] 18-1/16 [459] 200 [756] 270 [1021] 400 [182] 1016 [461] 35-1/2 [902] 29-7/8 [759] 61 [1549] 43-5/8 [1108] 21-7/8 [556] 250 [945] 465 [1758] 500 [227] 1384 [628] 41 [1041] 36 [914] 71 [1803] 51-5/8 [1311] 28-9/16 [725] 300 [1134] 665 [2514] 600 [272] 1770 [804] 46-1/4 [1175] 39-5/8 [1006] 80 [2032] 58-5/8 [1489] 32-1/2 [826] 350 [1323] 865 [3278] 700 [318] 2096 [951] 50-1/2 [1283] 43-7/8 [1114] 87 [2210] 63-5/8 [1616] 35-7/8 [911] 400 [1512] 1095 [4139] 800 [363] 2440 [1108] 54-1/4 [1378] 47-5/8 [1210] 94 [2388] 67 [1702] 39-3/4 [1010] 450 [1701] 1280 [4838] 900 [409] 2710 [1230] 55-1/4 [1403] 48-5/8 [1235] 100 [2540] 72 [1829] 40-7/8 [1038] 500 [1890] 1440 [5443] 1000 [454] 2857 [1297] 57-1/4 [1454] 51-5/8 [1311] 104 [2642] 74 [1880] 43-5/8 [1108]
Capacity Dimensions in Inches [mm] Water Grease Gal. [L] Lbs. [kg]
Inlet/ Outlet Size
3 [76]
5 [127]
Flow Rate G.P.M.
[L]
Approx.
Wt. Lbs.
[kg]
4 [102]
6 [152]
C D/E F G H
Note:
* 1. Sensor box is mounted on the left or right hand side of the unit when facing inlet (must be specified).
2. Power supply 120V GFCI.
3. Recommended Installations: Sitting on the floor or recessed in a pit only. (A pit installation requires that a drain or sump pump be installed to keep the pit relatively dry).
4. Location of inlet from bottom of interceptor cannot be changed.
Note:
Sizes 900 and 1000 require 1 cover.
Sizes 1100 thru 1600 require 2 covers.
Sizes 1700 thru 1900 require 3 covers.
DWG. NO. 82336
REV. B
PRODUCT NO. Z1172-UN
DATE: 10/21/10 C.N. NO. 111929
B70-GI
27"
9-3/8"
FLOW
AA
TOP VIEW
(COVER REMOVED FOR CLARITY)
Outlet "A" (Optional)
Outlet "C" (Optional)
Outlet "B" (Standard) Outlet Foot Must Face This Direction In All Configurations
Inlet
23"
12"
END VIEW
5"
INVERT
21-1/2" Cover
7"
5"
SECTION A-A
Engineered Inlet and Outlet Diffusers
See Note #11 CL of 4" FPT Inlet and Outlet
Static Water Line
Flow Control
ISOMETRIC VIEW
SPECIFICATIONS
Notes:
4" FPT inlet/outlet with 2" and 3" plain end fittings.1.
Unit weight - 39 lbs. (wet weight 123 lbs.)2.
Maximum operating temperature:3.
150º F continuous Capacities - Liquid: 10 gal.4.
Grease: 70 lbs. (9.6 gal.) @20 GPM Grease: 64.9 lbs. (8.9 gal.) @25 GPM Grease (99%): 15.85 lbs (2.2 gal.) @20 GPM 99.1% Solids: 1.3 gal.
Built-in flow control.5.
For gravity drainage applications only.6.
Do not use for pressure applications.7.
Cover placement allows full access to tank for8.
proper maintenance.
Vent not required unless per local code.9.
Engineered inlet and outlet diffusers are10.
removable to inspect/clean piping.
Integral air relief / anti-siphon.11.
Designed for indoor, on-floor, below-grade or low-profile under sink 12.
installations.
ENGINEER SPECIFICATION GUIDE
Schier Great Basin™ grease interceptor model # GB1 shall be lifetime guaranteed and made in USA of seamless, rotationally-molded polyethylene with minimum 5/16" uniform wall thickness. Interceptor shall be furnished for above or below grade installation. Interceptor shall be certified to ASME A112.14.3 (type C) and CSA B481.1, with field cut riser system, built-in flow control and three outlet options. Interceptor flow rate shall be 20 or 25 GPM.
Interceptor grease capacity shall be 70 lbs. @ 20 GPM or 64.9 lbs. @ 25 GPM. Cover shall provide water/gas-tight seal and have minimum 450 lbs. load capacity.
CERTIFIED PERFORMANCE
Great Basin™ hydromechanical grease interceptors are third party performance-tested and listed by IAPMO to ASME #A112.14.3 and CSA B481.1 grease interceptor standards and greatly exceed requirements for grease separation and storage. They are compliant to the Uniform Plumbing Code, the National Standard Plumbing Code, the National Plumbing Code of Canada, and the International Plumbing Code.
Satisfies Miami DERM 99% efficiency requirements. Product labels are permanently attached to inside and outside of unit for easy viewing.
6455 Woodland Dr Shawnee, KS 66218
Tel: 913-951-3300 Fax: 913-951-3399 schierproducts.com
DESCRIPTION:
DWG BY: DATE: REV:
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF SCHIER PRODUCTS. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF SCHIER PRODUCTS IS
PROHIBITED.
PROPRIETARY AND CONFIDENTIAL
C.SINCLAIR 5/5/2022 - ECO:
MODEL NUMBER:
GB1 GREASE INTERCEPTOR 20 GPM / 25 GPM, 4" FPT INLET/OUTLET, WITH
2" AND 3" PLAIN END FITTING ADAPTERS AND PEDESTRIAN RATED COVER
4060-001-04PART NUMBER:
GB1
SPECIFICATION SHEET
| Text1: B70-GI |
| Check Box2: |
| 0: Off |
| 1: Off |
| 2: Off |
| 3: Off |
| 4: Off |
File details come from the government source that posted it. Updated .