S02 - Attachment F - Mat Room Specifications.docx

MAT ROOM SPECIFICATIONS

Technical Requirements:

· Floor Mats

· 2” thick smooth surface high density foam able to withstand having an annual student throughput of 1500 students. At times there may be 75 students standing on the mat area.

· Mats will be climate stable and will not expand or contract due to temperature changes.

· Mats will be water resistant, anti-slip, with a durable coating.

· Warranty – Minimum of 10 year warranty on floor mats (Tearing, foam compression).

· New floor mat area will be from interior wall alcoves rough towards exterior wall with a total floor mat area of 59’ Long by 30’ Wide, including frame (+/-).

· Floor Mats will be Grey in color but agency is open to design options using grey, black, and blue. Exact design options to be submitted for approval with bid.

· Wall pads:

· 6 ft high with Grey or blue vinyl coating.

· Durable, fire resistant, water resistant, and shock absorbing.

· Installed on interior walls above floor mats. (Highlighted in Yellow) (See Page three (3) of this document)

· Interior wall pads will be installed on 59 foot distance and cover exposed corners.

· 6 Power outlets will be cut in and trimmed for a professional appearance.

· Corner 1 (Interior Corner toward room center)

· 2 ft

· 1 Double gang light switch cut in and trimmed for professional appearance

· Span 1 – 12 ft 3 Inches

· Span 2 – 31 Ft 5 Inches

· Span 3 - 12

· Columns – 4 inches Deep x 1 ft 3 5/8 inches Wide

· Corner 2 (Interior corner towards door)

· 8 Inches, 9 ½ inches, 4 inches, 2 inches

· 2 Double gang, 1 single gang light switch cut in and trimmed for professional appearance.

· Exterior room wall pads will be installed appropriately above floor mats where mats meet the wall. (24’ +/-)

· Left Exterior Wall – 10 Ft

· Right Exterior Wall

· A – 2 Ft 4 inches

· Column – 4 inches Deep x 1 ft 3 5/8 inches Wide

· B – 12 Ft

· Floor Mats and wall pads must be resistant to quaternary ammonium chloride based sanitizing cleaners.

· Installation

· The room that the floor mats and wall pads will be installed has a stained/sealed concrete floor and concrete block walls.

· Floor mats will need exterior frame, so mats are secured and unable to move out of place.

· Wall pad will need to be appropriately mounted to walls to reduce movement during training sessions.

· Installation location will be:

· 2200 Fort Roots Drive

· LETC Building # 191, Room 128

· North Little Rock, AR 72114

All Columns 4” Deep x 1’ 3 5/8” Wide Column

WALL PADS

INTERIOR WALL

Corner 1 2 Ft

Corner 2 8”, 9.5”, 4”, 2” B A

WALL PADS

A- 2’ 4” B- 12’

WALL PADS

10 Ft Column

12’ 3” 31’ 5” 12’ 3”

EXTERIOR WALL

MAT AREA

image3.png image4.png image1.png image2.png