S02 - ATTACHMENT 2 - SALIENT FEATURE - BRAND NAME OR EQUAL TO CUB CADET - 04-20-2023.pdf

SALIENT CHARACTERISTICS

“BRAND NAME OR EQUAL TO CAB CADET”

CUB CADET PRO Z 972 SDL-EFI

Cub Cadet Pro Z 972 SDL-EFI - 38.5 HP 999cc Kawasaki FX1000; Self-leveling seat; Rear dual wheels; Floating, fabricated 72" triple 7-gauge deck w/power deck lift, maintenance-free spindles, heavy duty 16cc Parker HTG transmissions, Adjustable ROPS.

1. 72” triple-7-gauge fabricated steel cutting deck with top, bottom and side reinforcements

2. Lock-in or out self-leveling air-ride seat with 30 degrees of side-to-side swivel/15 degrees of travel left or right.

3. Dual rear wheels and weighted front rims give this steep slope mower traction on up to a 46% grade. 12-volt outlet kit and electronic power deck lift included

4. 3-year limited commercial warranty (no hour limitations) and 5 years / 1,750-hour limited deck construction warranty

ENGINE

• Engine Brand Kawasaki®

• Engine Model FX Series EFI

• Engine Model Number1000V

• Engine Displacement999cc

• Engine Output38.5HP

• Starter Type Electronic

• Fuel Tank Capacity Dual 7.45 gal. US (28.2 L)

• Cylinders Twin

• Engine Start Ignition Key

• Engine Oil Capacity2.0 qt. US (1.89 L)

• Lubrication Fully pressurized

• Charging System15 amp regulated

• Fuel Gauge Electronic

• Choke Auto-Choke

• Air Filter High Density

• Oil Filter Yes

• Fuel Delivery Electronic Fuel Injection (EFI)

BATTERY

• Battery 310CCA AGM battery; Relay/Fuse terminal block; 30 AMP voltage regulator

DRIVE SYSTEM

• Transmission Parker® heavy duty HTG 16cc pump / 310cc wheel motor with oversized wheel bearings

• Forward Speed14 mph / 22.5 km/h

• Reverse Speed6 mph / 9.5 km/h

CUTTING DECK

• Deck Cutting Width72 in

• Deck Materialtriple-7-gauge fabricated steel

• Deck Engagement (PTO) Electronic with quick reset

• Deck Construction Floating, fabricated 7 ga (0.187") steel and adjustable rear striping rollers

• Spindle Construction Maintenance-free cast aluminum housing

• Blade(s)3 high-lift Marbain® blades / 18,500 fpm (approx.)

• Deck Lift Electro-hydraulic assist quick-lift design

• Cutting Height Range1” to 5” in 1/4” increments

• Anti-Scalping4 front deck gauge wheels

• Deck Positions16

WARRANTY

• Deck Shell Warranty5 year / 1,750-hour limited deck construction warranty

• Commercial Warranty3 year / no hour limit commercial warranty

CHASSIS

• Frame Fully welded, 3/8" x 5" laser-cut steel

• Front Axle 2" x 3" solid with Isolation dampening system, 1/2" thick steel

• ROPS 2" x 2" foldable 3-position with low profile

• Bumper 5/16" Thick Steel rear engine guard/pre-drilled mounting points for attachments with integrated rear hitch

• Rear Tow Hitch Bolt-On hitch std

CONTROLS

• Cruise Control NA

• Brakes Cruise Control NA

• Brakes Hand-operated lever with integrated hydro pump release lever

• Steering Control Quick-adjust steering column w/ power steering

• Operator Control Low-profile throttle lever Hand-operated lever with integrated hydro pump release lever

• Steering Control Quick-adjust steering column w/ power steering

• Operator Control Low-profile throttle lever.

WHEELS

• Rear Tires 25"x9"-12" HD Traction Tread

• Front Tires16"x6.5"-8"Kenda K505

• Tire Tread Heavy-Duty traction tread

DIMENSIONS

• Dimensions L/W/H 88" / 74" / 85"

• Weight (approx.)1,885 lbs