S02 36C25926Q0471 - Combined Synopsis Solicitation - Triple Bay Sink - 36C259-26-AP-2511.docx

Request for Quote (RFQ) : 36C25926Q0471 Triple Bay Reprocessing Sink

(i) This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Part 8, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. The Government reserves the right to make no award from this solicitation.

* The deadline for all questions is 3:00pm MST, May 13th, 2026 All questions must be submitted in writing no later than the question cut-off date marked above. All questions will be answered officially through an amendment to the solicitation.

** Quotes are to be provided to luther.dickens@va.gov no later than 3:00pm MST, May 15th, 2026.

Quotes shall not be hand carried. Faxed quotes shall not be accepted. Emailed quotes are the only method of submitted quotes (4MB size limitation per email). The Government reserves the right to make award solely on initial Quotes received. Offerors bear the burden of ensuring that all portions of the offer (and any authorized amendments) reach the designated office before the deadline specified in the solicitation. This RFQ shall be completed in its entirety, and signed and dated, failure shall not be considered for award.

(ii) This is a Request for Quote (RFQ), and the solicitation number is 36C25926Q0471. The government anticipates awarding a firm-fixed price contract resulting from this solicitation.

(iii) This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2026-01 effective March 13th, 2026.

(iv) The North American Industrial Classification System (NAICS) code for this procurement is 339113 with a small business size standard of 800 EMP. This solicitation is 100% set-aside for SDVOSB concerns.

(v) List of Line Items:

Sink 5097 – AMSCO 53 Reprocessing Sink 97.5" Triple Bay Don't let your cleaning standards sink. The AMSCO 53 Reprocessing Sink will help your facility provides a comfortable and flexible work environment for your staff. The sink is ergonomic as it offers a height adjustable counter and magnetic backsplash for accessories that help streamline workflow. When you purchase this unit, it will include: 30" bays, air & water pistols with the various tip attachments plus magnetic holders, 2 pre-rinse & faucet combos, treated water faucet, external drain lever handles and etched gallon markers in bay to ensure proper water to chemistry ratios.

equipment. Price is for normal working hours, Monday - Friday 8 am -5 pm unless otherwise noted. Includes with its Installation Services an operational check-out test, any necessary adjustments and a demonstration of the equipment for appropriate facility personnel. Please refer to the terms and conditions of installation found later in this quotation for a more detailed description of the scope of work.

monitoring, and USB data output. Acu-sInQ 2 Chemistry Dosing System with flow metering, temperature monitoring, and USB data output.

Includes USB thumb drive and all necessary tubing.

labor (non-union) and materials required to uncrate, set-in-place and assemble equipment. Price is for normal working hours, Monday - Friday 8 am -5 pm unless otherwise noted. Includes with its Installation Services an operational check-out test, any necessary adjustments and a demonstration of the equipment for appropriate facility personnel. Please refer to the terms and conditions of installation found later in this quotation for a more detailed description of the scope of work.

our complex equipment needs and ensures safe and timely delivery of all products. Our carrier representatives work to ensure accurate deliveries specific to your timeline as well as problem resolution should there be any delays, damage or redelivery required.

Anticipated Lead Time:

(vii) Description of Requirements for the items acquired – (see line items above) The Oklahoma City Veterans Health Care System is requesting Tripple Bay Reprocessing Sink. These sinks will play a crucial role in the Sterile Processing Service (SPS).

Statement of Work/PWS SOW: Scope of Work and General Specifications for Triple Bay Sinks

1. Background The Oklahoma VA Health Care System (OKC VAHCS) is committed to providing superior healthcare services to veterans and ensuring a safe and efficient medical environment. Part of this commitment involves maintaining high standards in the decontamination and sterilization of medical instruments, a critical factor in preventing infections and ensuring patient safety. To enhance the efficiency and capability of the decontamination area, OKC VAHCS needs to procure seven advanced reprocessing sinks. These sinks will play a crucial role in the Sterile Processing Service (SPS), ensuring that all reusable medical instruments are effectively decontaminated and prepared for subsequent sterilization processes. This purchase is part of a broader initiative to upgrade and modernize the medical facility's infrastructure, thereby improving workflow, compliance, and overall healthcare quality.

Project Scope

The OKC VAHCS must acquire these reprocessing sinks to meet the Sterile Processing Service's stringent requirements at the Oklahoma City medical facility. The project involves the procurement, installation, and commissioning of the seven advanced reprocessing sinks, which will be utilized in the decontamination area to streamline and enhance the manual cleaning process of surgical instruments.

The project scope includes:

Identification and selection of the most suitable reprocessing sinks that meet all specified criteria.

Coordination with suppliers regarding the timely delivery of the equipment.

Professional installation of the reprocessing sinks in the designated decontamination area.

Ensuring that the new equipment is fully operational and meets all regulatory and compliance standards.

Providing a demonstration of the equipment installed for the Engineering team and relevant staff members to ensure that they are familiar with the operation and maintenance of the new sinks.

The procurement of these reprocessing sinks is essential for maintaining the high standards of cleanliness and infection control mandated by regulatory bodies. It also supports the OKC VAHCS's mission to provide outstanding healthcare services by ensuring that all medical instruments are properly decontaminated, thus safeguarding the health and safety of both patients and healthcare providers.

2. Specifications

The Oklahoma City VAHCS specifications are designed to outline all the Oklahoma City VAHCS Nursing/Sterile Processing Service requirements. These requirements will be provided by the Contracting Officer Representative (COR) before final approval. The sterilizers’ requirements are provided below:

Three sink cleanup counters. Unit is constructed of type 304 corrosion resistant stainless steel. It consists of three sinks Bay dimensions: 30 x 17 x 10" (762 x 432 x 254 mm), hot and cold-water faucet, and pre-rinse spray hose. Equipped with channel reinforced drainboards, and backsplash, and supported by tubular stainless-steel legs. Unit is designed for use in control sterile supply decontamination areas. Reprocessing Sink is free-standing, height-adjustable unit that is available in a triple bay configuration. (Height Adjustability provides enhanced ergonomics and reduces employee back strain) Counter length options range from 77-120" (2-3 m) and right-to-left and left-to-right workflows are available. Additional features on this reprocessing are needed such as:

Air and water pistols with tip attachments Back splash-mounted pre-rinse and faucet combo Back splash-mounted treated water faucet Magnetic back splash Etched gallon markers in all bays Magnetic back splash is supplied to enable workstation customization as the accessories are equipped with magnets. This feature permits varied mounting and organization to employee preference(12”).

3. Engineering Training Requirements

No training shall be required other than the demonstration that comes with installation.

(vii) Delivery and acceptance are to be F.O.B Destination (FAR 52.247-34) at the Veterans Affairs Medical Center, located at: The Oklahoma City VA Medical Center, 921 N.E. 13th Street, Oklahoma City, OK 73104

(viii) 52.212-1, Instructions to Offerors-Commercial Items ADDENDUM to FAR 52.212-1 INSTRUCTIONS TO OFFERORS—COMMERCIAL

a. Gray market items are Original Equipment Manufacturers (OEM) goods sold through unauthorized channels in direct competition with authorized distributors. This procurement is for new OEM medical supplies, medical equipment and/or services contracts for maintenance of medical equipment (i.e., replacement parts) for VA Medical Centers. No remanufacturers or gray market items will be acceptable.

b. Offeror shall be an OEM, authorized dealer, authorized distributor or authorized reseller for the proposed medical supplies, medical equipment and/or services contracts for maintenance of medical equipment (i.e., replacement parts), verified by an authorization letter or other documents from the OEM, such that the OEM’s warranty and service are provided and maintained by the OEM. All software licensing, warranty and services associated with the medical supplies, medical equipment and/or services contracts for maintenance of medical equipment shall be in accordance with the OEM terms and conditions.

c. The delivery of gray market items to the VA in the fulfillment of an order/award constitutes a breach of contract. Accordingly, the VA reserves the right to enforce any of its contractual remedies. This includes termination of the contract or, solely at the VA’s election, allowing the Vendor to replace, at no cost with the Government, any remanufactured or gray market item(s) delivered to a VA medical facility upon discovery of such items.

d. Any award made as a result of this solicitation will be made on an All or Nothing Basis.

e. State if quoted items are available and priced through offerors existing Government-wide Acquisition Contract (GWAC), GSA Multiple Award Schedule (MAS) contract, or VA-wide Acquisition Contract.

f. If the acquisition is set-aside for SDVOSBs/VOSBs, their socioeconomic status must be (Vet-Cert ) verified and visible in the Veteran Small Business Certification Pages (Vert-Cert): https://www.veterans.certify.sba.gov/ at the time of quote submission AND award, or will be considered non-responsive, and will NOT be considered for award.

g. Offerors are warned against contacting any VA personnel other than the Contracting Officer and Contract Specialist prior to placement of any award made resulting from this RFQ. If such contact occurs and is found to be prejudicial to competing contactors, the offeror making such contact may be excluded from award considerations.

h. All proprietary information should be clearly and properly marked. If the Offeror submits annexes, documentation, attachments, or the like, not specifically required by this solicitation, such will count against the Offeror’s page limitations unless otherwise indicated in the specific volume instructions below.

i. All information shall be confined to the appropriate file. The offeror shall confine submissions to essential matters, sufficient to define the quote and provide an adequate basis for evaluation. Offerors are responsible for including sufficient details, in a concise manner, to permit a complete and accurate evaluation of each quote.

j. Submission of quote shall include the following volumes: (I) Price

Volume I – Price

Price - The offeror shall complete the pricing schedule provided in Section (v) above: Price/Cost Schedule.

(End of Addendum to 52.212-1)

(ix) 52.212-2, Evaluation--Commercial Items ADDENDUM to FAR 52.212-2 EVALUATION—COMMERCIAL ITEMS:

(a) This is FAR Part 13 acquisition. The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government considering price only. The following factors should be used to evaluate offers:

Price – The Government will evaluate offers by adding all line-item prices - the Total of All CLINS will be that sum. The Government may use various price analysis techniques and procedures to make price reasonableness determination. Offers that do not meet the technical capability requirements of the Statement of Work shall not be selected regardless of price.

(b) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options should not obligate the Government to exercise the option(s).

(c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer’s specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

(End of Addendum to 52.212-2)

(x) Offerors are advised to include a completed copy of the provision at 52.212-3, Offeror Representations and Certifications

– Commercial Items, with the offer.

(xi) 52.212-4, Contract Terms and Conditions--Commercial Items – applies to this acquisition

(xii) 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items (JUL 2020)

FAR 52.212-5 applies to this acquisition with the following FAR clauses incorporated by reference.

(xiii) Additional contract requirements or terms and conditions:

FAR 52.225-1 Buy American-Supplies (Oct 2022)

(a) Definitions. As used in this clause—

Commercially available off-the-shelf (COTS) item—

(1) Means any item of supply (including construction material) that is–

(i) A commercial product (as defined in paragraph (1) of the definition of “commercial product” at Federal Acquisition Regulation (FAR) 2.101).

(ii) Sold in substantial quantities in the commercial marketplace; and

(iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and

(2) Does not include bulk cargo, as defined in 46 U.S.C.40102(4), such as agricultural products and petroleum products.

Component means an article, material, or supply incorporated directly into an end product.

Cost of components means—

(1) For components purchased by the Contractor, the acquisition cost, including transportation costs to the place of incorporation into the end product (whether or not such costs are paid to a domestic firm), and any applicable duty (whether or not a duty-free entry certificate is issued); or

(2) For components manufactured by the Contractor, all costs associated with the manufacture of the component, including transportation costs as described in paragraph (1) of this definition, plus allocable overhead costs, but excluding profit. Cost of components does not include any costs associated with the manufacture of the end product.

Critical component means a component that is mined, produced, or manufactured in the United States and deemed critical to the U.S. supply chain. The list of critical components is at FAR 25.105 .

Domestic end product means—

(1) For an end product that does not consist wholly or predominantly of iron or steel or a combination of both-

(i) An unmanufactured end product mined or produced in the United States.

(ii) An end product manufactured in the United States, if-

(A) The cost of its components mined, produced, or manufactured in the United States exceeds 60 percent of the cost of all its components, except that the percentage will be 65 percent for items delivered in calendar years 2024 through 2028 and 75 percent for items delivered starting in calendar year 2029. Components of foreign origin of the same class or kind as those that the agency determines are not mined, produced, or manufactured in sufficient and reasonably available commercial quantities of satisfactory quality are treated as domestic. Components of unknown origin are treated as foreign. Scrap generated, collected, and prepared for processing in the United States is considered domestic; or

(B) The end product is a COTS item; or

(2) For an end product that consists wholly or predominantly of iron or steel or a combination of both, an end product manufactured in the United States, if the cost of foreign iron and steel constitutes less than 5 percent of the cost of all the components used in the end product. The cost of foreign iron and steel includes but is not limited to the cost of foreign iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the end product and a good faith estimate of the cost of all foreign iron or steel components excluding COTS fasteners. Iron or steel components of unknown origin are treated as foreign. If the end product contains multiple components, the cost of all the materials used in such end product is calculated in accordance with the definition of "cost of components".

End product means those articles, materials, and supplies to be acquired under the contract for public use.

Fastener means a hardware device that mechanically joins or affixes two or more objects together. Examples of fasteners are nuts, bolts, pins, rivets, nails, clips, and screws.

Foreign end product means an end product other than a domestic end product.

Foreign iron and steel means iron or steel products not produced in the United States. Produced in the United States means that all manufacturing processes of the iron or steel must take place in the United States, from the initial melting stage through the application of coatings, except metallurgical processes involving refinement of steel additives. The origin of the elements of the iron or steel is not relevant to the determination of whether it is domestic or foreign.

Predominantly of iron or steel or a combination of both means that the cost of the iron and steel content exceeds 50 percent of the total cost of all its components. The cost of iron and steel is the cost of the iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the product and a good faith estimate of the cost of iron or steel components excluding COTS fasteners.

Steel means an alloy that includes at least 50 percent iron, between 0.02 and 2 percent carbon, and may include other elements.

United States means the 50 States, the District of Columbia, and outlying areas.

(b) 41 U.S.C. chapter 83, Buy American, provides a preference for domestic end products for supplies acquired for use in the United States. In accordance with 41 U.S.C. 1907, the domestic content test of the Buy American statute is waived for an end product that is a COTS item (see 12.505(a)(1)), except that for an end product that consists wholly or predominantly of iron or steel or a combination of both, the domestic content test is applied only to the iron and steel content of the end product, excluding COTS fasteners.

(c) Offerors may obtain from the Contracting Officer a list of foreign articles that the Contracting Officer will treat as domestic for this contract.

(d) The Contractor shall deliver only domestic end products except to the extent that it specified delivery of foreign end products in the provision of the solicitation entitled "Buy American Certificate."

(End of clause)

FAR 52.225-2 BUY AMERICAN CERTIFICATE (OCT 2022)

(a)

(1) The Offeror certifies that each end product, except those listed in paragraph (b) of this provision, is a domestic end product and that each domestic end product listed in paragraph (c) of this provision contains a critical component.

(2) The Offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products. For those foreign end products that do not consist wholly or predominantly of iron or steel or a combination of both, the Offeror shall also indicate whether these foreign end products exceed 55 percent domestic content, except for those that are COTS items. If the percentage of the domestic content is unknown, select “no”.

(3) The Offeror shall separately list the line item numbers of domestic end products that contain a critical component (see FAR 25.105).

(4) The terms “commercially available off-the-shelf (COTS) item,” “critical component,” "domestic end product," "end product," and "foreign end product" are defined in the clause of this solicitation entitled "Buy American-Supplies."

(b)Foreign End Products:

(b)[List as necessary]

(c) Domestic end products containing a critical component:

Line-Item No. ___ [List as necessary]

(d) The Government will evaluate offers in accordance with the policies and procedures of part 25 of the Federal Acquisition Regulation.

(End of provision)

52.252-2, Clauses Incorporated by Reference (Feb 1998) This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

http://www.acquisition.gov/far/index.html http://www.va.gov/oal/library/vaar/

The following FAR clauses are incorporated by reference:

The following VAAR clauses are to be incorporated by reference:

52.252-1, Solicitation Provisions Incorporated by Reference (Feb 1998)

This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es):

http://www.acquisition.gov/far/index.html (FAR) http://www.va.gov/oal/library/vaar/index.asp (VAAR)

The following FAR provisions are to be incorporated by reference:

The following FAR provisions are to be incorporated by reference:

FAR 52.219-27 - Notice of Total Service-Disabled Veteran-Owned Small Business Set-Aside.

The following VAAR provisions are to be incorporated by reference:

(xiv) The Defense Priorities and Allocations System (DPAS) does not apply.

(xv) Date and Time offers are due to luther.dickens@va.gov by 3:00pm MST, May 15th, 2026.

(xvi) Name and email of the individual to contact for information regarding the solicitation:

Luther Dickens luther.dickens@va.gov

Attachment:

Certificate of Compliance