RSC SOW Draft Summary.docx

RSC SOW Draft Summary

1.1 BACKGROUND

Naval Surface Warfare Center - Philadelphia Division (NSWCPD) Code 551, 552, and 554 are the Machinery Controls Systems (MCS) branches for the USS ARLEIGH BURKE Class (DDG 51) guided missile destroyer. Current programs under Code 554’s responsibility include the Procurement of the Repair Station Console (RSC) hardware in support of new construction, modernization, and technical refresh efforts.

1.2 SCOPE OF WORK The Contractor shall provide engineering and technical services required for the design, development, fabrication, test, repair, and fleet implementation of Repair Station Console (RSC).

1.0 REQUIREMENTS

1.1 The Contractor shall design, fabricate, assemble and test Repair Station Consoles (RSC) to meet the performance requirements. The Contractor shall provide qualified personnel, materials, facilities, equipment, controls and control interfaces, test instrumentation, data collection and analysis, hardware, software, and services that support the product areas and applicable documents for the RSC. This includes, but is not limited to, machinery control system design and integration, mechanical and electrical power interface requirements, network systems, and design integration. The RSC system must be capable of being integrated into the ship without impacting other systems or established interfaces for the modernization and new construction programs already in progress. The physical design must meet the requirement to be installed onboard the ship with new foundations and not impact existing cable connections as already established for the modernization and new construction programs in process. The system to be procured will employ a modern, supported, cyber-secure computer operating system, and the overall system will employ increased cybersecurity capabilities.

1.1.1 QUALIFICATION SET - A Qualification Set shall consist of the following components and subsystems, at a minimum. Additional equipment, fittings, and accessories shall be provided as necessary to meet the requirements in the DDG-M RSC Performance Specification:

· One (1) RSC Panel PC (including display(s), computer/processor, internal speaker, and data storage device)

· One (1) integrated keyboard/trackball device

· One (1) Un-Interruptible Power Supply (UPS)

· One (1) display configuration:

· Configuration 1: 19” (minimum) LCD Flat Panel Display + 40” (minimum) LCD Panel Display (separate mounting for each)

· One (1) network based printer

· External cabling for power: UPS to additional display , UPS to Panel PC, Panel PC to integrated keyboard/trackball device, and ship’s power to printer External cabling for signal/data: Panel PC to additional display, Panel PC to integrated keyboard/trackball device, Panel PC to UPS, and Gigabit Ethernet Data Multiplex System (GEDMS) to printer

· One (1) license (with installation media) for the latest release of the Windows IoT Enterprise LTSC (64-bit) Operating System.

· Operating System should be installed, along with all necessary firmware.

· All required drivers and COTS software licenses with installation media

1.1.1.1 The Contractor shall also provide a copy of the full development environment capable of compiling all Contractor developed software in the form of a fully loaded COTS desktop PC or laptop PC. This PC shall be a one-time delivery and shall be delivered as part of the Qualification Set CLIN.

1.1.2 SHIPSET CLIN- A Shipset set shall consist of the following components and subsystems, at a minimum. Additional equipment, fittings, and accessories shall be provided as necessary to meet the requirements in the DDG-M RSC Performance Specification:

· Eight (8) RSC Panel PC (s) (including display(s), computer/processor, internal speaker, and data storage device)

· Eight (8) integrated keyboard/trackball devices

· Seven (7) Un-Interruptible Power Supplies (UPS)

· Three (3) display configurations:

· Configuration 1: 19” (minimum) LCD Flat Panel Display + 40” (minimum) LCD Panel Display (separate mounting for each)

· Configuration 2: 19” (minimum), LCD Flat Panel Display + 19” (minimum) LCD Flat Panel Display. (separate mounting for each)

· Configuration 3: 19” (minimum) LCD Panel Display

· One (1) network based printer

· External cabling for power: Panel UPS to additional display, UPS to Panel PC, Panel PC to integrated keyboard/trackball device, and ship’s power to printer

· External cabling for signal/data: Panel PC to additional display, Panel PC to integrated keyboard/trackball device, Panel PC to UPS, and GEDMS to printer

· All required drivers and COTS software licenses with installation media

· One (1) license (with installation media) for the latest release of the Windows IoT Enterprise LTSC (64-bit) Operating System.

· Operating System should be installed, along with all necessary firmware

1.1.3 INCO I CLINs - An INCO I (Installation & Check-out) Initial Kit shall consist of the following components and subsystems, at a minimum:

· Two (2) RSC Panel PC(s) (including display, computer/processor, internal speaker, and data storage device)

· One (1) Fuel Oil Lab Panel PC (FOLPC) (including display, touchscreen capability, computer/processor, internal speaker, and data storage device)

· Two (2) 19” LCD Flat Panel Display(s)

· One (1) solid state drive

· Two (2) Un-Interruptible Power Supplies (UPS)

· Two (2) UPS Battery Pack(s)

· Two (2) keyboard/trackball device(s)

· Two (2) 40” (minimum) LCD Panel Display (separate mounting for each)

· One (1) network based printer

· Three (3) licenses (with installation media) for the latest release of the Windows IoT Enterprise LTSC (64-bit) Operating System.

· Operating System should be installed, along with all necessary firmware

· All required drivers and COTS software licenses with installation media

1.1.4 INCO R CLINs -An INCO R (Installation & Check-out) Replenishment Kit shall consist of the following components and subsystems, at a minimum:

· One (1) RSC Panel PC(s) (including display, computer/processor, internal speaker, and data storage device)

· One (1) 19” LCD Flat Panel Display(s)

· One (1) solid state drive

· One (1) Un-Interruptible Power Supplies (UPS)

· One (1) UPS Battery Pack(s)

· One (1) keyboard/trackball device(s)

· One (1) licenses (with installation media) for the latest release of the Windows IoT Enterprise LTSC (64-bit) Operating System.

· Operating System should be installed, along with all necessary firmware

· All required drivers and COTS software licenses with installation media

1.1.5 OBRP CLINs - An OBRP (Onboard Repair Parts) Kit shall consist of the following components and subsystems, at a minimum:

· One (1) RSC Panel PC (included display, computer/processor, internal speaker, and data storage device)

· One (1) keyboard/trackball device

· One (1) 19” LCD Flat Panel Display

· One (1) license (with installation media) for the latest release of the Windows IoT Enterprise LTSC (64-bit) Operating System.

· Operating System should be installed, along with all necessary firmware

· All required drivers and COTS software licenses with installation media