Row Crop Tractor Specs.pdf

Row Crop Tractor Specifications

1. ENGINE:

• Minimum: 250 horsepower, 275 Maximum

• 6 Cylinder

• 9L diesel engine

• Tier 4/ Stage V compliant

• B20 Diesel Compatible

• Air-to-air aftercooling and cooled exhaust gas recirculation

2. DRIVE TRAIN:

• Transmission type: Mechanical, minimum 23 forward gears, minimum 11 reverse gears

(e.g. e23 transmission with Efficiency Manager)

• Right Hand Reverser Bump-Shift Type Controls

• maximum travel speed: 26 mph

• Automatic control of engine power and ground speed

• Automatic lowering of engine rpm under light load conditions

• Hydraulic Power Steering

• Integrated Hydraulic Pump with (60 gpm) of hydraulic flow

• Mechanical Front-Wheel Drive Axle, with limited slip differential

3. CHASSIS:

• Average Operating weight: 25,000 – 28,000 lbs.

• Fuel tank: minimum 190 gallon capacity

4. CAB/Visibility:

• Seat with adjustment controls and mechanical Lumbar Support

• Air Seat Suspension

• Folding Instructional Seat

• AM/FM Radio, Weatherband, Auxiliary Input Jack, and Bluetooth Microphone

• Speaker System Business Band Radio Includes Wiring, Antenna Base, and Mounting Location 4

USB ports

• Front and Rear Windshield Washer and Wiper

• Front Sunshade

• Right and Left Outside Mirrors

• Minimum lighting: Two Low Beam Driving Lights, Two High Beam Driving Lights and Two

Front Corner Facing Halogen Work Lights

• Minimum Twelve Cab Roof Mounted Lights: Two Rear, Two Front, and Four Side Facing Flood lights and Four Corner Facing Amber Lights.

• Minimum Two Rear Fender Mounted Flood Lights and Two Rear Turn Signal and Brake Lights.

Two folding extremity lights.

• Minimum Two Front Belt Line Work Lights

• Minimum Three Integrated LED beacon lights

• Camera ready

Row Crop Tractor Specifications

5. MISC. ITEMS:

• System connectivity that provides information regarding performance management, machine location, historical performance & utilization, etc. (e.g. JDLink Hardware & Subscription)

• Integrated guidance system with +/- 1 inch pass-to-pass accuracy, in-season repeatability, Rapid

Recovery, (e.g StarFire 6000 – SF3 and RTK; with RTK Radio 450 and RTK Bracket Kit)

• Four Rear remote selective control valves with Electrohydraulic Controls, Couplers and High

Pressure Relief Levers

• 45 mm; 1,000 RMP (20-spline) power take off (PTO) for high-power, heavy PO Loads

• Rear Hitch Minimum 15,000 lb. capacity 3-point hitch with coupler and sway blocks

• Front Hitch Minimum 11,000 lb. capacity

• Minimum Category 3 adjustable swinging drawbar with 1.5 inch (38mm) pin, 4,000 lb. minimum

6,000 lb. maximum vertical load

• Rear Wheels: 480/80R46 158A8 R2 Radial in Single Wheel Configuration

• Front Wheels: 420/90R30 142A8 R2 Radial in Single Wheel Configuration

• Tractor will need to communicate and be compatible with the location’s existing GreenStar

AutoTrac Systems

• Quoter must show proof they are an authorized reseller/dealer for the quoted manufacturer

• Manufacturer’s Authorized Servicer within 10 miles of the delivery location

NOTES:

Requirement is for a Row Crop Tractor comparable to Deere 8R 250 unit with the specifications listed above. The quote should include all delivery costs (FOB Destination). Award will be made on Best

Value to the Government considering Technical Capability, Past Performance and Price. Please indicate lead time.

Delivery Address

USDA ARS

411 South Donahue Drive

Auburn, AL 36832