RFR Scuba Equipment and Services 949 amend.docx

THE COMMONWEALTH OF MASSACHUSETTS

Department of Conservation & Recreation

10 Park Plaza, Boston MA 02116

Request for Response (RFR)

Document Title: DCR 949 SCUBA Supplies, Maintenance, and Training for the Western Region of Massachusetts COMMBUYS Bid#: BD-25-1020-DCRCU-DC250-108444

Agency Document Number: DCR 949

Please Note: This is a single document associated with a complete Bid (also referred to as Solicitation) that can be found on COMMBUYS (www.COMMBUYS.com). All Bidders are responsible for reviewing and adhering to all information, forms and requirements for the entire Bid, which are all incorporated into the Bid. Bidders may also contact the OSD Help Desk Helpdesk at OSDHelpDesk@mass.gov or the OSD Helpline at 1-888-MA-STATE. The Helpline is staffed from 8:00 AM to 5:00 PM Monday through Friday Eastern Standard or Daylight time, as applicable, except on federal, state and Suffolk county holidays.

Document Sensitivity Level: High during development; Low once published.

Revised: October 20, 2020 RFR Introduction and General Description Procurement Scope and Description The Commonwealth of Massachusetts Department of Conservation and Recreation Lakes & Ponds Program is seeking proposals from qualified firms to provide necessary SCUBA equipment, training and maintenance to SCUBA equipment in order to complete the monitoring for aquatic invasive species that could be present in Massachusetts Lakes.

Applicable Procurement Law This Bid is issued under the following law(s):

· MGL c. 7, § 22; c. 30, § 51, § 52; and 801 CMR 21.00 (Goods and Services)

Number of awards The target maximum number of Contractors is 30 This is a target number; the SST may award more or fewer Contracts if it is in the best interests of the Commonwealth to do so.

Adding Contractors after initial Contract award This solicitation will result in rolling enrollment, which means that proposals may be submitted and may be evaluated at any time after the initial deadline of the solicitation. After initial contract awards are made, however, DCR reserves the right to begin evaluating submissions as they are received. DCR also reserves the right to suspend the review of additional submissions or close the solicitation for new responses entirely if it deems that the number of contractors awarded at that point adequately meets the DCR’s needs.

Eligible Entities Limited User Contract – Restricted to Use by Defined Entities Only. Any Contract(s) resulting from this Bid will be open for use by the issuing Purchasing Department and the following other entities:

The Purchasing Department reserves the right to add or remove additional named authorized users during the contract term.

State and Local municipalities.

State Agencies

Acquisition Method(s) The acquisition method(s) to acquire services from this Bid Fee for Service.

The expected duration of this contract is as follows:

Initial Duration

3 years 0 months

Total Maximum Contract Duration

5 years

No goods may be ordered and no new leases, rentals, maintenance or other agreements for services may be executed after the Contract has expired.

Estimated Procurement Calendar

Times are Eastern Standard/Daylight Savings (US), as displayed on the COMMBUYS system clock displayed to Bidders after logging in. If there is a conflict between the dates in this Procurement Calendar and dates in the Bid’s Header, the dates in the Bid’s Header on COMMBUYS shall prevail. Bidders are responsible for checking the Bid record, including Bid Q&A, on COMMBUYS for Procurement Calendar updates.

Specifications Additional required terms appear in the Appendices to this RFR.

Bidder Qualifications

Vendor must be licensed to operate a SCUBA business within Massachusetts. Must be an accredited SCUBA vendor affiliated with one of the Nationally recognized SCUBA organizations (NAUI,PADI,SSI, etc..)

Company experience Vendor must have 5+ years of operation as a SCUBA vendor performing all of the duties listed in 3.2

References and reference information and/or requirements Provide examples of similar training, service and supplies for municipalities withing Massachusetts.

Service Specifications

General Requirements: The intent of this RFR is to pre-qualify a number of vendors who can provide SCUBA equipment, supplies and training. Most of site work is located in the Berkshire region Specific Technical Areas:

The businesses will be required to provide a multitude of equipment and training to the program along with service of any and all SCUBA equipment that is used.

Scope of Services: The successful vendor(s) will be required to provide some or all of the following:

-SCUBA Supplies: related equipment such as but not limited to: Dry suits, wet suits, air tanks, Buoyancy Compensators (BC), safety equipment, dive gauges, hoses, fins, masks snorkels, and other peripherals.

-SCUBA training: such as but not limited to: Rescue diver, Master diver, Underwater Recovery/Mapping.

-SCUBA Maintenance: such as but not limited to: BC; air tanks; air fills; gauges; dry suit inspections, repair and yearly maintenance Performance Measures: Each vendor’s response will be evaluated on the merit of cost, equipment type/manufacturer and the ability of that vendor to perform maintenance on the equipment provided.

Other Terms Continued qualification based on performance Reporting.

Contractors are responsible for compliance with all other contract reporting requirements including, but not limited to, Supplier Diversity Program (SDP) and other contract reports, as required by this contract.

Contract Management (Contractor’s interface with Commonwealth’s Contract Manager) The “Purchaser” contact listed in the Master Blanket Purchase Order on COMMBUYS for this Contract is the Commonwealth Contract Manager.

All Contract questions must be directed to the Commonwealth Contract Manager.

Timely response to requests ` Meetings Commonwealth Contract Manager Other Contractors Contractor providing electronic documents for up-to-date transparent pricing of:

Catalogs Contract Cost Tables Web sites specifically designed for this Contract Change notification Changes to the Contractor’s contact information, company name, legal address, payment address, tax identification number, authorized signatories, SDO-certification status, or EFT information must be promptly reported via email to the Commonwealth Contract Manager. In some cases additional paperwork will be required to effect the change.

Contractor account team Single Point of Contact (Contractor Contract Manager) Replacement of Contractor staff Adding commodities and/or services to the Contract Automatically follows the manufacturer’s national/global price list with the same percent discount.

Cost requirements <including requirements for contractors to provide additional discounts> Documentation required Time constraints Environmentally Preferable Products and Services The department and Contractor(s) may establish a preference for Environmentally Preferable Products (EPPs) and/or negotiate during the Contract term to permit the substitution or addition of EPPs to the Contract when such products are readily available at a competitive cost and satisfy the department’s performance needs.

Report requirements & due dates Supplier Diversity Program (SDP) Spending Report

Identification and approval of subcontractors & joint ventures (see Subcontracting Policies in this RFR and the Commonwealth Terms and Conditions) Advertising pre-approval Press releases Right to inspect place of business Failure to perform contractual obligations as outlined in the Standard Contract Form, Terms and Conditions, and RFR may result in the following; consultation with agency legal counsel is strongly recommended Termination Suspension Adding additional contractors Cover/Replacement Costs Liquidated Damages

Audit During the term of this Agreement and for a period of six years thereafter, its auditors, the Operational Services Division, the Office of the Inspector General or other authorized representatives shall be afforded access at reasonable times to Contractor's accounting records, including sales information on any system, reports or files, in order to audit all records relating to goods sold or services performed pursuant to this Agreement. If such an audit indicates that Contractor has materially overcharged, then the Contractor shall remit the overcharged amount and be responsible for payment of any costs associated with the audit.

Evaluation criteria Bidder scores will be used to rank Bidders and will determine which Bidders will proceed to subsequent stages of the evaluation and/or enter into negotiations with the Commonwealth to receive a Contract award.

Mandatory requirements Bidders on tasks outlined in 3.2 SERVICE SPECIFICATIONS. All vendors must be licensed SCUBA shops with the State of Massachusetts.

Evaluation Components The following components will be some of the criteria considered by the SST when evaluating each Quote:

· Certifications

· Service

· Location of shop relative to the Berkshires

· Ability to provide and service various SCUBA equipment.

Price Please note that price will carry a significant weight in the evaluation process.

The following price components will be evaluated

Prompt Pay Discounts (PPD)

Company certifications and affiliations Vendor must be associated with one of the accreided International SCUBA affiliations (NAUI, PADI, SSI, etc..)

Company experience Vendor must have performed all services in 3.2 in Massachusetts for at least the previous 5 years.

6.2.4 Language diversity

HOW TO SUBMIT A quote

All Bidders may begin creating and compiling Quote materials as soon as the Bid with all attachments is in the Sent document status. Bidders are instructed not to submit Quotes before the Bid Amendment Deadline has been reached (see Estimated Procurement Calendar).

Quote Submission Method Online Quote Submission via COMMBUYS is required.

All Bidders must submit Quotes online using tools available only to Sellers registered in COMMBUYS. COMMBUYS provides Seller registration functionality at no charge. To register, go to www.COMMBUYS.com and click on the “Register” link on the front page. All Bidders who are awarded a contract resulting from this Bid, if any, will be required to maintain an active account during the duration of the Contract, by reviewing their registration information regularly and maintaining its accuracy.

COMMBUYS Quote Submission Training and Instructions The following resources are provided to assist Bidders in submitting Quotes:

· Appendix Instructions for Vendors Responding to Bids Electronically through COMMBUYS, which is part of this document;

· Training sessions focused on online Quote submission, if offered, are noted in the Estimated Procurement Calendar;

· An online job aid on How to Create a Quote

· Webcast video on How to Find Bids (Solicitations) and Submit Quotes (Responses) through COMMBUYS.

COMMBUYS Support Technical assistance is available during the procurement process. Every effort is made to respond to inquiries within one business day.

Website: Go to www.mass.gov/osd/commbuys and select the COMMBUYS Resource Center link offered under Key Resources.

Email: Send inquiries to the OSD Help Desk at OSDHelpDesk@mass.gov Telephone: Call the OSD Help Desk at 1-888-MA-STATE (1-888-627-8283). The Help Desk is staffed from 8:00 AM to 5:00 PM Monday through Friday Eastern Standard or Daylight time, as applicable, except on federal and state holidays.

Bidders are advised that COMMBUYS will be unavailable during regularly scheduled maintenance hours of which all users will be notified.

Bid Opening Date/Time All Bids must be received by the Operational Services Division before the specified date, month, year and time displayed as the Bid Opening Date/Time in the Header Information section of the Bid in COMMBUYS. Times are Eastern Standard/Daylight Savings (US), as applicable. All Bidders are advised to allow adequate time for submission by considering potential online submission impediments like Internet traffic, Internet connection speed, file size, and file volume. OSD is not responsible for delays encountered by Bidders or their agents, or for a Bidder’s local hardware failures, such as computers or related networks, associated with bid compilation or submission. Bids submitted via COMMBUYS are time stamped by the COMMBUYS system clock which is considered the official time of record.

Quote Contents Bidders must comply with the requirements below.

RFR Submission Checklist Strategic Sourcing Services Teams seek to reduce the number of Bidder disqualifications based on incomplete submissions. Therefore, Bidders must complete and submit the RFR Submission Checklist and all documents referenced in the Checklist.

Electronic Signatures Quotes submitted via COMMBUYS must be signed electronically by the Bidder or the Bidder’s Agent by accepting the terms and conditions of the bid on the “Terms & Conditions” tab of the Bid in COMMBUYS. By selecting “Save & Continue” on the “Terms and Conditions” tab after accepting the terms and conditions of the bid, the submitter attests that s/he is an agent of the Bidder with authority to sign on the Bidder’s behalf, and that s/he has read and assented to each document’s terms.

Successful Bidders who agreed to the terms and conditions of these forms electronically via COMMBUYS online Quote submission tool must still submit the above forms with ink signatures within seven (7) calendar days of award notification or their contract may not be executed by the Commonwealth. Bidders who have previous contract(s) with the Commonwealth and have up-to-date, ink-signature versions of the Commonwealth Terms and Conditions and Request for Taxpayer Identification and Verification (Mass. Substitute W9 Form) on file with the Office of the State Comptroller may submit copies of the signed forms. However, a new Standard Contract Form and Contractor Authorized Signatory Listing with original ink signatures must be submitted for each new contract with the Commonwealth.

File Naming Conventions Files submitted via COMMBUYS must follow the file naming convention specified below. The Description entered during the file upload process ensures each file is readily identified by Company Name and content. The File Name assigned by the Bidder as stored on their computer or network must be structured such that each file can be processed by the upload tool. The upload tool will reject any file name that includes spaces or symbols, like the brackets [ ] some systems apply when files are downloaded from the Internet.

RFR Section or Quote Component Description Enter in COMMBUYS during upload File Name Assign when creating files

Company Name Marketing Print Ad Company Name Marketing Postcard CompanyName_MktBroch.doc CompanyName_MktPrint.doc CompanyName_MktPost.doc

Company Name Clothing Catalog Part 1 Company Name Clothing Catalog Part 2 CompanyName_FootCat.pdf CompanyName_ClothCat1.pdf CompanyName_ClothCat2.pdf

File Size Limits The system will not accept files that approach or exceed 10 MB. If a large file fails to upload, the Bidder must save the contents as multiple files. Note the naming convention used above which illustrates distinguishing multi-part files through use of Part 1, Part 2, etc If a large file fails to upload, bidders must break up the file and append _Part1, _Part2 to the end of the Description and File Name.

File Format Restrictions All scanned documents must be in .pdf or .gif format, and must be scanned in such a way that they can be read on a computer monitor and printed on 81/2” x 11” paper, unless otherwise specified. Forms provided for the Bidder to complete, with the exception of the forms requiring ink signatures, must be completed and submitted in their original formats, NOT scanned and submitted as PDF or other file types.

Withdrawing a Quote Prior to Bid Opening Date/Time Quotes may be withdrawn using the “Withdraw Quote” button offered under the Summary tab of a submitted Quote.

After Bid Opening Date/Time No Quote can be withdrawn after the Bid Opening Date/Time. If the Bidder wants to remove a Quote from consideration, contact the Strategic Sourcing Services Lead for guidance.

Additional Quote Terms Prohibition regarding contract terms Bidders must not, as part of their Quote, propose additional contractual terms, or supplemental or clarifying language pertaining to contractual terms, even if the proposed additions/clarifications are not in conflict with the Commonwealth Terms and Conditions, the Standard Contract Form, or other documents comprising this RFR. It is essential for Contracting Departments that all contractors’ Statewide Contracts can be depended upon to incorporate the same terms and only those terms. Contractors who wish to propose additional non-conflicting contractual terms, or supplemental or clarifying language, may do so ONLY on a case-by-case basis, negotiated for each specific engagement and memorialized in the Project Statement of Work.

Bidder Response Form All specifications of this RFR that are not mandatory such as those specifically identified as “optional,” “desirable” or in other terms indicating that the specification is not mandatory must have a response within the Bidder Response Form (or equivalent) provided on COMMBUYS for this Bid in order to be evaluated. Most items within the Bidder Response Form will be scored to determine the apparent successful bidders. The SSST does not want and will not read, consider or evaluate a line by line response to this RFR.

Appendix 1 – Required Terms for all RFRs General Procurement Information Access to security-sensitive information Bidders agree to adhere to this section in the event that an eligible entity provides a Contractor with security-sensitive information which, pursuant to MGL c. 4, § 7, cls. 26(n), is generally exempt from public disclosure under the Commonwealth’s public records laws and must, for public safety purposes, be safeguarded from widespread public disclosure. This security-sensitive information is in the form of blueprints, plans, policies, procedures, schematic drawings, which relate to internal layout and structural elements, security measures, emergency preparedness, threat or vulnerability assessments, and/or any other records relating to the security or safety of persons (pursuant to MGL c. 66A) or buildings, structures, facilities, utilities, transportation, information technology or other infrastructure located within the Commonwealth. Qualified prospective Bidders that are interested in accessing this information for the purpose of preparing a Quote must, before being allowed to access the information, sign a confidentiality agreement, thereby agreeing to:

· restrict the use of these sensitive records for any other purpose than as authorized and for the purpose of putting together a bid proposal;

· safeguard the information while it is in their possession (consistent with Section 6 of the Commonwealth Terms and Conditions); and

· return such records and materials to the Commonwealth upon completion of the project.

Alterations Bidders may not alter (manually or electronically) the Bid language or any Bid component files, except as directed in the RFR. Modifications to the body of the Bid, specifications, terms and conditions, or which change the intent of this Bid are prohibited and may disqualify a Quote.

Ownership of Submitted Quotes The SST shall be under no obligation to return any Quotes or materials submitted by a Bidder in response to this Bid. All materials submitted by Bidders become the property of the Commonwealth of Massachusetts and will not be returned to the Bidder. The Commonwealth reserves the right to use any ideas, concepts, or configurations that are presented in a Bidder’s Quote, whether or not the Quote is selected for Contract award.

Quotes stored on COMMBUYS in the encrypted lock-box are the file of record. Bidders retain access to a read-only copy of this submission via COMMBUYS, as long as their account is active. Bidders may also retain a traditional paper copy or electronic copy on a separate computer or network drive or separate media, such as CD or DVD, as a backup.

Prohibitions Bidders are prohibited from communicating directly with any employee of the procuring Department or any member of the SST regarding this RFR except as specified in this RFR, and no other individual Commonwealth employee or representative is authorized to provide any information or respond to any question or inquiry concerning this RFR. Bidders may contact the contact person using the contact information provided in the Header Information this Bid in the event that this RFR is incomplete or information is missing. Bidders experiencing technical problems accessing information or attachments stored on COMMBUYS should contact the OSD Help Desk (see the document cover page for contact information).

In addition to the certifications found in the Commonwealth’s Standard Contract Form, by submitting a Quote, the Bidder certifies that the Quote has been arrived at independently and has been submitted without any communication, collaboration, or without any agreement, understanding or planned common course or action with, any other Bidder of the commodities and/or services described in the RFR.

Terms and Requirements Pertaining to Awarded Contracts Commonwealth Tax Exemption Invoices or invoices submitted to Massachusetts government entities must not include sales tax.

Contractor’s Contact Information It is the Contractor’s responsibility to keep the Contractor’s Contract Manager information current. If this information changes, the Contractor must notify the Contract Manager by email immediately, using the address located in the Header Information of the Purchase Order or Master Blanket Purchase Order on COMMBUYS.

The Commonwealth assumes no responsibility if a Contractor’s designated email address is not current, or if technical problems, including those with the Contractor’s computer, network or internet service provider (ISP), cause e-mail communications between the Bidder and the SST to be lost or rejected by any means including email or spam filtering.

Contractual Status of Orders and Service Contracts Orders or service engagements placed under the Contract established as a result of this Bid by Eligible Entities shall be considered separate Contracts between the Eligible Entity and the Contractor, and shall be deemed to incorporate all of the terms and conditions of the Contract. Nothing contained in any order or service contract shall amend or vary the terms of the Contract. Additional terms which do not conflict with the Commonwealth’s Terms and Conditions, the Massachusetts Standard Contract Form, this Bid and any amendments, or the Bidder’s Quote, may be included in an order or service contract if mutually agreed upon by the Contractor and eligible entity.

Publicity Any Contractor awarded a contract under this Bid is prohibited from selling or distributing any information collected or derived from the Contract, including lists of participating Eligible Entities, Commonwealth employee names, telephone numbers or addresses, or any other information except as specifically authorized by the SST.

appendix 3 Instructions for Vendors Responding to Bids Electronically through COMMBUYS

Introduction COMMBUYS refers to all solicitations, including but not limited to Requests for Proposals (RFP), Invitations for Bid (IFB), Requests for Response (RFR), Requests for Quote (RFQ), as “Bids.” All responses to Bids are referred to as “Quotes.”

Steps for Bidders to Submit a Quote

1. Launch the COMMBUYS website by entering the URL (www.COMMBUYS.com) into the browser.

2. Enter Bidder login credentials and click the Login button on the COMMBUYS homepage. Bidders must be registered in COMMBUYS in order to submit a Quote. Each Vendor has a COMMBUYs Seller Administrator, who is responsible for maintaining authorized user access to COMMBUYS.

3. Upon successful login, the Vendor home page displays with the Navigation and Header Bar as well as the Control Center. The Control Center is where documents assigned to your role are easily accessed and viewed.

4. Click on the Bids tab

5. Clicking on the Bid tab opens four sections:

a. Request for Revision

b. Bids/Bid Amendments

c. Open Bids

d. Closed Bids

6. Click on the blue Open Bid hyperlinks to open and review an open bid

7. A new page opens with a message requesting you acknowledge receipt of the bid. Click Yes to acknowledge receipt of the bid. Bidders should acknowledge receipt to receive any amendments/updates concerning this bid.

8. After acknowledgement, the bid will open.

The top left half of the page contains the following information:

a. Purchaser

b. Department

c. Contact for this bid

d. Type of purchase

i. Open Market

ii. Blanket

e. Pre-Bid Conference details (if applicable)

f. Ship-to and Bill-to addresses

g. Any attachments to the bid, which may include essential bid terms, response forms, etc.

The top right half of the bid includes the following information:

h. Bid Date

i. Required Date

j. Bid Opening Date – date the bid closes and no further quotes will be accepted

k. Informal Bid Flag

l. Date goods/services are required

9. The lower half of the page provides information about the specific goods/services the bid is requesting.

10. Click Create Quote to begin.

11. The General tab for a new quote opens. This page is populated with some information from the bid. Fields available to update include:

a. Delivery days

b. Shipping terms

c. Ship via terms

d. Is “no” bid – select if you will not be submitting a quote for this bid

e. Promised Date

f. Info Contact

g. Comments

h. Discount Percent

i. Freight Terms

j. Payment Terms It is important to note that the bid documents (RFR and attachments) may specify some or all of these terms and may prohibit you from altering these terms in your response. Read the bid documents carefully and fill in only those items that are applicable to the bid to which you are responding.

Update these fields as applicable to the bid and click Save & Continue to save any changes and create a Quote Number. The page refreshes and messages display. Any message in Red is an error and must be resolved before the quote can be submitted. Any message in Yellow is only a warning and will allow processing to continue.

The following messages are received:

Terms & Conditions is not acknowledged – to resolve this, click on the Terms & Conditions tab and accept the terms. Your quote has not been submitted – information message; no action required

12. Click on the Terms & Conditions Tab. This tab refers to the terms and conditions that apply to this bid. The terms and conditions must be accepted before your quote can be submitted. If your acceptance is subject to any exceptions, those exceptions must be identified here. Exceptions cannot contradict the requirements of the RFR, or required Commonwealth standard forms and attachments for the bid. For instance, an RFR may specify that exceptions may or will result in disqualification of your bid.

13. Click the Items tab. The Items tab displays information about the items requested in the bid. To view additional details about an item, click the item number (blue hyperlink) to open.

14. The item opens. Input all of your quote information and click Save & Exit.

15. CONFIDENTIAL INFORMATION: If documents uploaded in your quote response contain confidential information (security sensitive, EFT, W9, Commonwealth Terms and Conditions), you must mark each item as confidential. The confidential column on the Attachments view allows the user to select whether the attached form is confidential or not. Place a check box under the confidential column for each confidential attached form.

16. Click on the Attachments Tab. Follow the prompts to upload and name all required attachments and forms and bid response documents in accordance with the instructions contained in the solicitation or bid documents. After uploading each individual file or form, click Save & Continue. After you have uploaded all required documents click Save & Exit. Be sure to review your attachments to make sure each required document has been submitted.

17. Click the Summary tab. Review the information and update/correct, as needed. If the information is correct, click the Submit Quote button at the bottom of the page.

18. A popup window displays asking for verification that you wish to submit your quote. Click OK to submit the quote.

19. The Summary tab redisplays with an updated Status for the quote of Submitted.

20. Your quote submission is confirmed only when you receive a confirmation email from COMMBUYS. If you have submitted a quote and have not received an email confirmation, please contact the OSD Help Desk at OSDHelpDesk@mass.gov. If you wish to revise or delete a quote after submission, you may do so in COMMBUYS: (1) for a formal bid, prior to the bid opening date, or (2) for an informal bid (which may be viewed upon receipt), prior to the opening of your quote by the issuing entity or the bid opening date, whichever is earlier.

Bidders may not submit Multiple Quotes in response to a Bid unless the Bid authorizes Multiple Quote submissions. If you submit multiple quotes in response to a bid that does not allow multiple quotes, only the latest submission prior to the bid opening date will be evaluated.

RFR ATTACHMENTS FOR

GOODS/SERVICES CONTRACT

The following attached forms are part of this RFR, are hereby incorporated by reference and shall be part of any agreement between bidder(s) and DCR. Bidders must complete, execute, and deliver, as applicable, all forms listed below, and any additional forms as required by DCR, for contract award.

Appendix A: Required Specifications for Commodities and Services (07/13/2023) Set forth in full below and available online at: https://www.mass.gov/doc/rfr-required-specifications-for-commodities-and-services Appendix B: Standard Contract Form (07/22/2021) (Incorporates by reference the Commonwealth Terms and Conditions) Appendix C: Standard Contract Form Instructions and Contractor Certifications (08/06/2021) Appendix D: Commonwealth Terms and Conditions (10/25/2019) Appendix E: Prompt Payment Discount Form (All bidders must provide even if not offering a prompt payment discount) https://www.macomptroller.org/wp-content/uploads/form_prompt-pay-discount.pdf Appendix F: Authorization for Electronic Funds Payment (Bidders must provide upon award of contract unless already on file with the Comptroller) https://www.macomptroller.org/announcement/new-contractor-authorized-signatory-listing-casl-forms/ Appendix G: Environmentally Preferable Product Information Appendix H: Supplier Diversity Program (SDP) Plan Form for Bids SDP plans are mandatory for large procurements (over $250,000 in annual value) but are strongly encouraged by OSD for all procurements.] https://www.mass.gov/lists/sdo-forms#supplier-diversity-program-(sdp)-plan-forms-for-goods-and-services- Appendix I: Contractor Authorized Signatory Listing (Bidder must provide upon award of contract) https://www.macomptroller.org/announcement/new-contractor-authorized-signatory-listing-casl-forms/ Appendix J: Massachusetts Substitute W-9 Form (Bidder must provide upon award of contract unless already on file with the Comptroller) https://www.macomptroller.org/wp-content/uploads/form_w-9.pdf PLEASE READ THIS ENTIRE DOCUMENT CAREFULLY BEFORE REACHING OUT WITH ANY QUESTIONS OR COMPLETING/SUBMITTING A BID RESPONSE.

APPENDIX A

RFR - Required Specifications for Commodities and Services Revision Date: July 13, 2023

In general, most of the required contractual stipulations are referenced in the Standard Contract Form and Instructions and the Commonwealth Terms and Conditions. However, the following RFR provisions must appear in all Commonwealth competitive procurements conducted under 801 CMR 21.00.

The terms of 801 CMR 21.00: Procurement of Commodities and Services are incorporated by reference into this RFR. Words used in this RFR shall have the meanings defined in 801 CMR 21.00. Additional definitions also may be identified in this RFR. Other terms not defined elsewhere in this document may be defined in OSD’s Glossary of Terms. Unless otherwise specified in this RFR, all communications, responses, and documentation must be in English, all measurements must be provided in feet, inches, and pounds and all cost proposals or figures in U.S. currency. All responses must be submitted in accordance with the specific terms of this RFR.

1. COMMBUYS Market Center. COMMBUYS is the official source of information for this Bid and is publicly accessible at no charge at www.commbuys.com. Information contained in this document and in COMMBUYS, including file attachments, and information contained in the related Bid Questions and Answers (Q&A), are components of the Bid, as referenced in COMMBUYS, and are incorporated into the Bid and any resulting contract.

Bidders are solely responsible for obtaining all information distributed for this Bid via COMMBUYS. Bid Q&A supports Bidder submission of written questions associated with a Bid and publication of official answers.

It is each Bidder’s responsibility to check COMMBUYS for:

· Any amendments, addenda, or modifications to this Bid, and

· Any Bid Q&A records related to this Bid.

The Commonwealth accepts no responsibility and will provide no accommodation to Bidders who submit a Quote based on an out-of-date Bid or on information received from a source other than COMMBUYS.

2. COMMBUYS Registration. Bidders may elect to register for a free COMMBUYS Seller account which provides value-added features, including automated email notification associated with postings and modifications to COMMBUYS records. However, to respond to a Bid, Bidders must register and maintain an active COMMBUYS Seller account.

All Bidders submitting a Quote (previously referred to as Response) in response to this Bid (previously referred to as Solicitation) agree that, if awarded a contract: 1) they will maintain an active seller account in COMMBUYS; 2) they will, when directed to do so by the procuring entity, activate and maintain a COMMBUYS-enabled catalog using Commonwealth Commodity Codes; 3) they will comply with all requests by the procuring entity to utilize COMMBUYS for the purposes of conducting all aspects of purchasing and invoicing with the Commonwealth, as added functionality for the COMMBUYS system is activated; and 4) in the event the Commonwealth adopts an alternate e-procurement platform, successful Bidders will be required to utilize such system, as directed by the procuring entity. Commonwealth Commodity Codes are based on the United Nations Standard Products and Services Code (UNSPSC).

COMMBUYS uses terminology with which bidders must be familiar to conduct business with the Commonwealth. To view this terminology and to learn more about COMMBUYS, please visit the Learn about COMMBUYS Resources page on mass.gov.

3. Multiple Quotes. Bidders may not submit Multiple Quotes in response to a Bid unless the RFR authorizes them to do so. If a Bidder submits multiple quotes in response to an RFR that does not authorize multiple responses, only the latest dated quote submitted prior to the bid opening date will be evaluated.

4. Quote Content. Bid specifications for delivery, shipping, billing, and payment will prevail over any proposed Bidder terms entered as part of the Quote, unless otherwise specified in the Bid.

5. Supplier Diversity Office (SDO) Programs. Pursuant to Executive Order 599, the Commonwealth supports the use of diverse and small businesses through the Small Business Purchasing Program (SBPP) and the Supplier Diversity Program (SDP). Based on the estimated value of the procurement, one of the above-mentioned programs shall be applicable to this RFR. For more information on the program that applies to this solicitation, see the body of this RFR.

6. Small Business Purchasing Program (SBPP)-REQUIRED

Program Background. The Massachusetts Small Business Purchasing Program (SBPP) was established pursuant to Executive Order 599 to increase state contracting opportunities with small businesses having their principal place of business within the Commonwealth of Massachusetts. Pursuant to the SBPP, it is the intention of the issuing department to award this Small Procurement to one or more SBPP participating business(es) as described below.

SBPP Award Preference. While all businesses, no matter the size or principal place of business, may submit responses to this solicitation, should an SBPP participant respond and meet the best value criteria described in this solicitation, the SBPP participant shall be awarded the contract. The Strategic Sourcing Services Team (SST) will not evaluate submissions from non-SBPP participants unless no SBPP Bidder meets the SSST’s best value evaluation criteria.

SBPP Participation Eligibility. To be eligible to participate in this procurement as an SBPP participant, an entity must meet the following criteria, and be marked as an SBPP-registered business in COMMBUYS:

1. Have its principal place of business in the Commonwealth of Massachusetts.

2. Been in business for at least one year.

3. Employ a combined total of 50 or fewer full-time equivalent employees in all locations, or employees work less than a combined total of 26,000 hours per quarter; and

4. Have gross revenues, as reported on appropriate tax forms, of $15 million or less, based on a three-year average.

Non-profit firms also must be registered as a non-profit or charitable organization with the MA Attorney General’s Office and be up to date with all filings required by that office and be tax exempt under Section 501(c) of the Internal Revenue Code.

SBPP Compliance Requirements. It is the responsibility of the Bidder to ensure that their SBPP status is current at the time of submitting a response and throughout the life of any resulting contract. Misrepresentation of SBPP status will result in disqualification from consideration, and may result in debarment, contract termination, and other actions. To learn more about the SBPP, including how to apply, visit the SBPP webpage, http://www.mass.gov/sbpp.

Program Resources and Assistance. Bidders and Contractors seeking assistance regarding SBPP may visit the SBPP Webpage, or contact the SBPP Help Desk at sbpp@mass.gov.

7. Supplier Diversity Program (SDP)- NOT REQUIRED

Program Background. Pursuant to Executive Order 599, the Commonwealth’s Supplier Diversity Program (SDP) promotes business-to-business relationships between awarded Contractors and diverse businesses and non-profit organizations (“SDP Partners”) certified or recognized (see below for more information) by the Supplier Diversity Office (SDO).

All Bidders and Contractors are strongly encouraged to create a profile on the SDO’s Supplier Diversity Hub to access the Commonwealth’s supplier diversity resources and tools.

Financial Commitment Requirements. All Bidders responding to this solicitation are required to make a significant financial commitment (“SDP Commitment”) to partnering with one or more SDO-certified or recognized diverse business enterprise(s) or non-profit organization(s). This SDP Commitment must be expressed as a percentage of contract sales resulting from this solicitation that would be spent with the SDP Partner(s).

After contract award (if any), the Total SDP Commitment shall become a contractual requirement to be met annually on a Massachusetts fiscal year basis (July 1 – June 30) for the duration of the contract. The minimum acceptable Total SDP Commitment in response to this solicitation shall be 1%. Bidders shall be awarded additional evaluation points for higher SDP Commitments.

No contract shall be awarded to a Bidder without an SDP Commitment that meets the requirements stated herein. This requirement extends to all Bidders regardless of their own supplier diversity certification.

Eligible SDP Partner Certification Categories SDP Partners must be business enterprises and/or non-profit organizations certified or recognized by the SDO in one or more of the following certification categories:

· Minority-Owned Business Enterprise (MBE)

· Minority Non-Profit Organization (M/NPO)

· Women-Owned Business Enterprise (WBE)

· Women Non-Profit Organization (W/NPO)

· Veteran-Owned Business Enterprise (VBE)

· Service-Disabled Veteran-Owned Business Enterprise (SDVOBE)

· Disability-Owned Business Enterprise (DOBE)

· Lesbian, Gay, Bisexual, and Transgender Business Enterprise (LBGTBE)

Eligible Types of Business-to-Business Relationships. Bidders and Contractors may engage SDP Partners as follows:

· Subcontracting, defined as a partnership in which the SDP partner is involved in the provision of products and/or services to the Commonwealth.

· Ancillary Products and Services, defined as a business relationship in which the SDP partner provides products or services that are not directly related to the Contractor’s contract with the Commonwealth but may be related to the Contractor’s own operational needs.

Other types of business-to-business relationships are not acceptable under this contract. All provisions of this RFR applicable to subcontracting shall apply equally to the engagement of SDP Partners as subcontractors.

Program Flexibility. The SDP encompasses the following provisions to support Bidders in establishing and maintaining sustainable business-to-business relationships meeting their needs:

· SDP Partners are not required to be subcontractors.

· SDP Partners are not required to be Massachusetts-based businesses.

· SDP Partners may be changed or added during the term of the contract, provided the Contractor continues to meet its SDP Commitment.

SDP Plan Form Requirements. All Bidders must complete the SDP Plan Form included in this solicitation and attach it to their bid response. In addition to proposing an SDP Commitment, each Bidder must propose one or more SDP Partner(s) to utilize to meet its SDP Commitment. Certified diverse Bidders may not list their own companies, their subsidiaries, or affiliates as SDP Partners and may not meet their SDP Commitment by spending funds internally or with their own subsidiaries or affiliates.

Bidders may propose SDP Partners that are:

· Certified or recognized by the SDO: Such partners appear in the SDO Directory of Certified Businesses or in the SBA Veteran Small Business Certification (VetCert) directory. After contract award (if any), spending with such partners will contribute to meeting the Contractor’s SDP Commitment.

· Not yet certified or recognized by the SDO: Such partners must be certified in eligible categories by a third-party certification body, such as another city or state supplier diversity certification office, the National Minority Supplier Development Council, the Women Business Enterprise National Council, Disability: IN, or the National LGBT Chamber of Commerce (NGLCC), but are not listed in the above-mentioned directories. Self-certification is not acceptable. While Bidders may list such proposed SDP Partners on their SDP Plans, spending with such partners will not contribute to meeting the Contractor’s SDP Commitment unless they apply for and are granted SDO supplier diversity certification or recognition. If proposed SDP Partners do not receive SDO supplier diversity certification or recognition, the Contractor must find alternative SDP Partners to meet the SDP Commitment.

It is the responsibility of the Contractor to ensure that their proposed SDP Partners obtain such certification or recognition by the SDO after contract award (if any). The issuing department and the SDO will not conduct outreach to proposed SDP Partners to ensure their certification. Furthermore, no guarantee may be made that a proposed SDP Partner will be certified, or regarding the time it may take to process a proposed SDP Partner certification. Contractors may direct partners to the SDO’s homepage, www.mass.gov/sdo and the Certification Self-Assessment Tool for guidance on applying for certification.

It is desirable for Bidders to provide an SDP Focus Statement that describe the bidder’s overall approach to increasing the participation of diverse businesses in the provision of products and services under this proposal/contract (subcontracting) and in the Bidder’s general business operations (ancillary products and services). Such a description may include but not be limited to:

· A clearly stated purpose or goal.

· Specific types of diverse and small businesses targeted.

· Which departments/units within the business are responsible for implementing supplier diversity.

· Types of opportunities for which diverse and small businesses are considered.

· Specific measures/methods of engagement of diverse and small businesses.

· An existing internal supplier diversity policy.

· Public availability of the Bidder’s supplier diversity policy.

It also is desirable for Bidders to use the SDP Plan Form to describe additional creative initiatives (if any) related to engaging, buying from, and/or collaborating with diverse businesses. Such initiatives may include but not be limited to:

· Serving as a mentor in a mentor-protégé relationship.

· Technical and financial assistance provided to diverse businesses.

· Participation in joint ventures between nondiverse and diverse businesses.

· Voluntary assistance programs by which nondiverse business employees are loaned to diverse businesses or by which diverse business employees are taken into viable business ventures to acquire training and experience in managing business affairs.

Evaluation of SDP Forms. To encourage Bidders to develop substantial supplier diversity initiatives and commitments as measures valuable to the Commonwealth, at least 25% of the total available evaluation points for this bid solicitation shall be allocated to the evaluation of the SDP Plan submissions. Because the purpose of the SDP is to promote business-to-business partnerships, the Bidders’ workforce diversity initiatives will not be considered in the evaluation.

SDP Spending Reports. After contract award, Contractors must submit reports at least annually to demonstrate compliance with the agreed-upon SDP Commitment. To submit SDP spending reports using the Hub, Contractors must create a profile in the Hub. Contractors must follow report submission instructions from the issuing department and the SDO.

SDP Spending Compliance. Only spending with SDP Partners that appear in the SDO Directory of Certified Businesses or in the SBA Veteran Small Business Certification (VetCert)directory shall be counted toward a Contractor’s compliance with their SDP Commitment. Spending with SDP Partners that do not appear in the directories above shall not be counted toward meeting a Contractor’s SDP Commitment.

It is the responsibility of the Contractor to ensure they meet their SDP Commitment, and the SDO and the issuing department assume no responsibility for any Contractor’s failure to meet its SDP Commitment.

SDP Spending Verification. The SDO and the contracting department reserve the right to contact SDP Partners at any time to request that they attest to the amounts reported to have been paid to them by the Contractor.

Program Resources and Assistance. Contractors seeking assistance in the development of their SDP Plans or identification of potential SDP Partners may visit the SDP webpage, www.mass.gov/sdp, or contact the SDP Help Desk at sdp@mass.gov.

8. Agricultural Products Preference (only applicable if this is a procurement for Agricultural Products). Chapter 123 of the Acts of 2006 directs the State Purchasing Agent to grant a preference to products of agriculture grown or produced using locally grown products. Such locally grown or produced products shall be purchased unless the price of the goods exceeds the price of products of agriculture from outside the Commonwealth by more than 10%. For purposes of this preference, products of agriculture are defined to include any agricultural, aquacultural, floricultural, or horticultural commodities; the growing and harvesting of forest products; the raising of livestock, including horses; raising of domesticated animals, bees, and/or fur-bearing animals; and any forestry or lumbering operations.

9. Best Value Selection and Negotiation. The Strategic Sourcing Services Team or SSST may select the response(s) which demonstrates the best value overall, including proposed alternatives that will achieve the procurement goals of the department. The SSST and a selected bidder, or a contractor, may negotiate a change in any element of contract performance or cost identified in the original RFR or the selected bidder’s or contractor’s response which results in lower costs or a more cost effective or better value than was presented in the selected bidder’s or contractor’s original response.

10. Bidder Communication. Bidders are prohibited from communicating directly with any employee of the procuring department or any member of the SSST regarding this RFR except as specified in this RFR, and no other individual Commonwealth employee or representative is authorized to provide any information or respond to any question…