RFR 25-foot Vessel 09182014.doc

The Commonwealth of Massachusetts

SECRETARY OF PUBLIC SAFETY

DEPARTMENT OF STATE POLICE

470 Worcester Road, Framingham, MA 01702

Request for Response (RFR) Document Title: Purchase of 25-foot Center Console with T-Top Response Vessel ASK "RFR Number/Document Number" \* MERGEFORMAT COMMBUYS Bid#: BD-15-1084-POLTA-17300-00000001596 Agency Document Number: SP15-PatrolVessel-X16 September 18, 2014

1.

RFR Introduction and General Description 1.1 Procurement Scope and Description 1.2 Background information 1.3 Applicable Procurement Law 1.4 Number of awards 1.5 Adding Contractors after initial Contract award 1.6 Eligible Entities 1.7 Acquisition Method 1.8 Performance and Payment Time Frames Which Continue Beyond Duration of the Contract.

1.9 Contract Duration 1.10 Estimated Value of the Contract 2.

Estimated Procurement Calendar Written questions via the Bid Q&A on COMMBUYS Locating Bid Q&A Amendment Deadline 3.

Specifications 25-Foot Center Console with T-Top Response Vessel and Related Parts & Accessories Standard Features Collar System Hull & Deck Fuel System Center Console Dash Rigging and Electrical Miscellaneous Warranties Environmental Specifications – Executive Order 515, Establishing an Environmental Purchasing Policy Compensation Structure/Pricing 4.

Other Terms:

Reporting Security and confidentiality Orders 5.

Audit:

6.

Evaluation criteria Mandatory requirements Alternatives Evaluation Components Price Supplier Diversity Plan (formerly Affirmative Market Plan) (minimum of 10% weight) 7.

HOW TO SUBMIT A Quote 8.

Appendix 1 – General Procurement Information Alterations Ownership of Submitted Quotes Prohibitions Terms and Requirements Pertaining to Awarded Contracts 9.

Appendix 2 - RFR - Required Specifications 10.

APPENDIX 3- Instructions for Execution and Submission of Commonwealth Standard Forms Commonwealth Standard Contract Form Commonwealth Terms and Conditions Request for Taxpayer Identification Number and Certification (Mass. Substitute W9 Form) Contractor Authorized Signatory Listing Supplier Diversity Program Plan Form 1 Additional Environmentally Preferable Products / Practices Prompt Payment Discount Form Business Reference Form 11.

appendix 4 - glossary

1. RFR Introduction and General Description

1.1 Procurement Scope and Description

The Commonwealth of Massachusetts Department of State Police is soliciting Bidders for the acquisition of a 25-foot Center Console with T-Top Response Vessel and any related parts and accessories. Bids must be received in accordance with the requirements by Thursday, October 16, 2014 at 2:00 pm EST.

1.2 Background information

Funding for the procurement of this vessel is being provided by the Port Security Grant Program managed by FEMA under The Department of Homeland Security. Federal Funds are to be utilized for this procurement. Respondents will not be considered if they appear on the Federal Government’s Debarment list.

1.3 Applicable Procurement Law

This Bid is issued under the following law(s):

MGL c. 7, § 22; c. 30, § 51, § 52; and 801 CMR 21.00 (Goods and Services)

1.4 Number of awards

The target maximum number of Contractors is one (1). This is a target number; the SST may award more or fewer, Contracts if it is in the best interests of the Commonwealth to do so.

1.5 Adding Contractors after initial Contract award

If, over the life of the Contract, the Strategic Sourcing Team (SST) determines that additional Contractors should be added, these may first be drawn from qualified companies which responded to this Bid but were not awarded contracts. If necessary to meet the requirements of the Commonwealth, the Bid may be reopened to obtain additional Quotes.

1.6 Eligible Entities

Any contract resulting from this Bid will be open for use by the Issuing Entity as well as any of the following eligible entities at the discretion of the Department of State Police:

1. Cities, towns, districts, counties and other political subdivisions;

2. Executive, Legislative and Judicial Branches, including all Departments and elected offices therein;

3. Independent public authorities, commissions and quasi-public agencies;

4. Local public libraries, public school districts and charter schools;

5. Public hospitals owned by the Commonwealth;

6. Public institutions of higher education;

7. Public purchasing cooperatives;

8. Non-profit, UFR-certified organizations that are doing business with the Commonwealth;

9. Other states and territories with prior approval by the State Purchasing Agent; and

10. Other entities when designated in writing by the State Purchasing Agent.

The Issuing Entity reserves the right to add or remove additional eligible entities during the contract term. Each eligible entity is responsible for executing its own purchase orders and paying its own invoices for goods and/or services acquired from this Contract. Contractors will be responsible for marketing their goods and/or services to Commonwealth Agencies and other eligible entities.

1.7 Acquisition Method

The acquisition method to acquire goods and/or services from this Bid are: Outright Purchase.

1.8 Performance and Payment Time Frames Which Continue Beyond Duration of the Contract.

All term leases, rentals, maintenance or other agreements for services entered into during the duration of this contract and whose performance and payment time frames extend beyond the duration of this contract shall remain in effect for performance and payment purposes (limited to the time frame and services established per each written agreement). No new leases, rentals, maintenance or other agreements for services may be executed after the contract has expired. Any contract termination or suspension pursuant to this section shall not automatically terminate any leases, rentals, maintenance or other agreements for services already in place unless the department also terminates said leases, rentals, maintenance or other agreements for service, which were executed pursuant to the main contract.

1.9 Contract Duration

The expected duration of this contract is as follows:

Initial Duration

Total Maximum Contract Duration

No goods may be ordered and no new leases, rentals, maintenance or other agreements for services may be executed after the Contract has expired.

1.10 Estimated Value of the Contract

The estimated value of purchase(s) resulting from this Bid is $150,000. The Commonwealth makes no guarantee that any commodities or services will be purchased from any Contract resulting from this Bid. Any estimates or past procurement volumes referenced in this Bid are included only for the convenience of Bidders, and are not to be relied upon as any indication of future purchase levels.

2. Estimated Procurement Calendar

Times are Eastern Standard/Daylight Savings (US), as displayed on the COMMBUYS system clock displayed to Bidders after logging in. If there is a conflict between the dates in this Procurement Calendar and dates in the Bid’s Header, the dates in the Bid’s Header on COMMBUYS shall prevail. Bidders are responsible for checking the Bid record, including Bid Q&A, on COMMBUYS for Procurement Calendar updates.

Written questions via the Bid Q&A on COMMBUYS The “Bid Q&A” provides the opportunity for Bidders to ask written questions and receive written answers from the SST regarding this Bid. All Bidders’ questions must be submitted through the Bid Q&A found on COMMBUYS (see below for instructions). Questions may be asked only prior to the Deadline for Submission of Questions stated in the Estimated Procurement Calendar. The issuing department reserves the right not to respond to questions submitted after this date. It is the Bidder’s responsibility to verify receipt of questions.

Please note that any questions submitted to the SST using any other medium (including those that are sent by mail, fax, email or voicemail, etc.) will not be answered. To reduce the number of redundant or duplicate questions, Bidders are asked to review all questions previously submitted to determine whether the Bidder’s question has already been posted.

Bidders are responsible for entering content suitable for public viewing, since all of the questions are accessible to the public. Bidders must not include any information that could be considered personal, security sensitive, inflammatory, incorrect, collusory, or otherwise objectionable, including information about the Bidder’s company or other companies. The SST reserves the right to edit or delete any submitted questions that raise any of these issues or that are not in the best interest of the Commonwealth or this Bid.

All answers are final when posted. Any subsequent revisions to previously provided answers will be dated.

It is the responsibility of the prospective Bidder and awarded Contractor to maintain an active registration in COMMBUYS and to keep current the email address of the Bidder’s contact person and prospective contract manager, if awarded a contract, and to monitor that email inbox for communications from the Purchasing Department, including requests for clarification. The Purchasing Department and the Commonwealth assume no responsibility if a prospective Bidder’s/awarded Contractor’s designated email address is not current, or if technical problems, including those with the prospective Bidder’s/awarded Contractor’s computer, network or internet service provider (ISP) cause email communications sent to/from the prospective Bidder/Awarded contractor and the Purchasing Department to be lost or rejected by any means including email or spam filtering.

Locating Bid Q&A Log into COMMBUYS, locate the Bid, acknowledge receipt of the Bid, and scroll down to the bottom of the Bid Header page. The “Bid Q&A” button allows Bidders access to the Bid Q&A page.

Amendment Deadline The SST reserves the right to make amendments to the Bid after initial publication. It is each Bidder’s responsibility to check COMMBUYS for any amendments, addenda or modifications to this Bid, and any Bid Q&A records related to this Bid. The SST and the Commonwealth accepts no responsibility and will provide no accommodation to Bidders who submit a Quote based on an out-of-date Bid or on information received from a source other than COMMBUYS.

3. Specifications

Additional required terms appear in the Appendices to this RFR.

25-Foot Center Console with T-Top Response Vessel and Related Parts & Accessories Standard Features Length: 25’ LOA, Transom height/shaft length: 30” Beam: 102 inches – Inside Beam: 71 inches Person capacity: 15 Two (2) 250 HP Honda engines with 25-inch shaft Dry weight: approximately 4,600 lbs. or less without power Draft: approximately 29 inches with average load Max weight capacity, persons, motor, gear: 5,366 lbs Collar System XDR-1 Extreme Duty Reinforcement Collar System. Patented solid polyethylene (closed cell form) collar encapsulated by a marinized polyurethane membrane with extreme rip-stop reinforcement.

Color: Blue Anti-fouling paint on side plates behind collars.

Standard identification collar lettering.

Hull & Deck 5/16” -5086 Aluminum bottom plate with stringer system with angled transverse framing on 12-inch centers.

Low profile dimmable LED deck/walkway lights. Inside & outside lights independently operated Double keel beaching plate Self-bailing decks with twin 4-inch deck scuppers.

Low profile dimmable LED deck/walkway lights Non-skid decks with 3M Safety Walk. All non skid edges are sealed with 3M Edge Seal.

Stepped transom with performance shoe in bottom plate. Four full length, fully welded performance strakes.

Sacrificial zinc anode Performance wings below collars Dual aft lockers with fabricated lids. (vented) Port & Starboard aft lockers have independent sub-floors for mounting remote engine items.

Bow storage locker with fabricated lid. (vented) Stacked self-draining anchor locker with fabricated lid, anchor tie downs and drain.

Outside lockers equipped with fabricated aluminum access doors.

All lockers vents are designed to reduce water intrusion.

Six (6) 10-inch cast aluminum, welded on cleats.

Non-skid gunwale flanges.

Three piece aft, side and bow rail system Fore & aft tow posts with SS cross pins Heavy duty motor cage/tow line guide Tow line spool mounted on aft face of radar mast Fabricated aluminum life ring mount Duel SS bow eyes SS bow and transom lifting eyes.

Oversized rig tubes below deck to accommodate electrical and mechanical rigging Flared high volume scupper valves keep aft deck dry while backing down

Personnel recovery side plate collar cutouts. Facilitates PIW recovery.

Fuel System

Fuel fill pod with SS fill and vent

150-gallon fuel tank with a formed bottom. (1/4” -5086) No bottom seams. Longitudinal and transverse baffles.

Fuel tank has full size doubler plates on tank ends to isolate tank from mounting brackets

Fuel tank mounting brackets are isolated on rubber mounts from hull structure.

Duel fuel tank pickups

Racor water separator with see-thru bowl, printing system & self venting drain. (one per motor): SS swaged fittings, WEMA sender removable for tank cleaning, inspection.

Center Console Dash

Laminated safety glass windshield with blow-out resistant gasket

50 inch wide console with SS 3/8-inch u-bolts for security pump can in front of console.

OHIP- Overhead fold down electronics bar

Red/white dome light on overhead. Movable day /night drop light mounted inside console. May be plugged into 12 volt accessory receptacle.

Fabricated aluminum T-Top with rain capture ring and down spouts to self bailing deck

Staggered radar pod with flag mast. (set up to fly with twin or single flags)

Full height framed in booted safety glass windshield and side windows with side notched handles

H shaped grab handles on front side of console

Angled throttle control pod

Upper 46”x12” dash face on console (for flush mounting electronics)

On dash grab handles (2)

Overhead grab handles (2)

Tall storage/ seat bolster (40 inches from deck with flip up seat and thwart ship grab handle, built in foot rest)

Two shock mitigating seats mounted for operation

Rigging and Electrical Accessory 12-volt power receptacles.

Fabricated tie bars to secure all wiring Triple Blue Top Optima Battery Cluster per Honda specifications/BEP battery distribution cluster All electrical connections are sealed in marine grade shrink tube Blue Sea 360 marine grade breaker system, battery switches, back lighting and custom labels Running lights Port, starboard and aft flood/deck lights Upgraded self-parking intermittent windshield wiper with washer system Hydraulic steering. (tilt helm) Transom rig tubes Twin overhead air circulation fans

Two (2) fire extinguishers and mounts Compass with backlighting Twin blue law enforcement LED lights Miscellaneous Perform sea trial and document mechanical and performance data. (fuel, labor, oil included) PCL = Pump can storage locker.

SPK = Shore power with galvanic isolator, 110 panel, 110 outlet, built in battery charger, and 25 foot cord PRC = Personnel recovery side plate and collar cutouts

Bow cover

Black Rubberized Rail Wrap

Black 3M 710 Non-skid

Black rubberized Dash Skid

Canvas enclosure for T-Top

Collar system equipped with S/S D- rings and hand lines

Installation of two (2) 250 engines, drop shipped to successful bidder by Mass State Police

Installation of Honda Twin Rigging-Digital Gauges, drop shipped to successful bidder by Mass State Police

Power assist steering

Raymarine Hybrid Touch Network/Multi Function with trunion bracket

Raymarine Thru-hull Transducer w/Extension

Raymarine Digital Scanner

Raymarine Transceiver

Icom Ic-M504 VHF radio w/ Shakespeare Antenna (2)

Whelen Loudhailer System

ARC Search Light w/ remote point pad

4 Tank roll-control Dive tank holders

Anchor kit

Docking kit

Trailer: galvanized Bunk Trailer with Disc Brakes, Bow Ladder, v-stop and LED lighting.

Dive ladder PRC platform with locking pins and lanyards/dive ladder SS Garelick 4-rung with storage mount

The vessel provided to the department is required to be factory new and the type called for with all standard equipment and accessories, and optional equipment, that is to be supplied on the model requested. It must be free of ANY defect at time of delivery or delivery will not be accepted. The winning bidder is required to install all optional equipment as requested. Installation of optional equipment must be conducted at a completion facility which must be agreed to by the Department prior to commencement of any installation on and above standard factory completion criteria. Construction must be performed by a United States builder, within the geographic confines of the United States. Bidder must be qualified to construct vessels of this size and type and have produced at least twenty (20) of similar design over the last five (5) year period.

Bidders are required to be a Certified Dealer for the vessel offered.

Bidders are required to provide delivery within ninety (90) days of receipt of order, unless mutually agreed to by the Department and the bidder. Purchasing department reserves the right to access a five percent (5%) penalty fee for late delivery. In any event, all orders must be received by the close of the Commonwealth of Massachusetts fiscal year (June 30th) in which the order was placed.

Operator familiarization with all components must be provided within three days of delivery of equipment unless otherwise specified.

All quotes are required to be FOB destination. The term FOB destination shall mean delivered and unloaded in-house or on-site, at contractor risk, with all charges for transportation, insurance, personnel and unloading prepaid by the contractor. Delivery must be made to the Massachusetts State Police Marine Unit facility located at 200 Beverly Street Boston, Massachusetts. The winning bidder is required to be responsible for the vessel until it is accepted at the State Police Marine Unit. Any loss or damage incurred up until delivery to the Marine Unit shall be the sole liability/responsibility of the winning bidder.

Bidder must submit a detailed listing of all product support that is offered. Product support must include but is not limited to emergency orders and defective merchandise return policy.

Additionally, the Department expects outstanding customer support and after sale service so we may continue to accomplish our public safety duties. The winning bidder must agree to stock spare parts, components and systems applicable to the selected vessel. Bidder must submit a detailed listing of all product support that is offered. Product support must include, but is not limited to training, on-site service, technical support, and defective merchandise return policy.

Three (3) copies of the Complete boat operator’s manual(s) must be provided Warranties A one year service contract with the successful bidder wherein, if the boat is inoperative, or is projected to be inoperative, for more than two weeks due to the failure of warranted items, the successful bidder agrees to deliver and supply, at no expense to the Commonwealth, a functional and similar (in size and capabilities) patrol boat for the duration of time the original boat remains inoperative.

5 year hull and structure warranty.

One year stem to stern warranty excluding power plants and electronics.

It is clearly understood this boat is to be used as a working police boat and will be used from time to time as a search and rescue platform as well as in towing operations and that all warranties and agreements will not be limited or nullified by the intended use.

Environmental Specifications – Executive Order 515, Establishing an Environmental Purchasing Policy

Products and services purchased by state agencies must be in compliance with Executive Order 515, issued October 27, 2009. Under this Executive Order, Executive Departments are required to reduce their impact on the environment and enhance public health by procuring environmentally preferable products and services (EPPs) whenever such products and services perform to satisfactory standards and represent best value, consistent with 801 CMR 21.00. In line with this directive, all contracts, whether departmental or statewide, must comply with the specifications and guidelines established by OSD and the EPP Program. EPPs are considered to be products and services that help to conserve natural resources, reduce waste, protect public health and the environment, and promote the use of clean technologies, recycled materials, and less toxic products. Questions concerning the EO or the appropriate specifications may be directed to OSD’s EPP Procurement Program, www.mass.gov/epp. The Order can be seen at http://www.mass.gov/Agov3/docs/Executive%20Orders/executive_order_515.pdf.

Compensation Structure/Pricing

Pricing for all products MUST be indicated on the Cost Sheet for each product indicated. No delivery charges will be permitted under this Contract. Bidder must list any additional or unusual charges that may be passed on to the Department of State Police. If a sale price is offered and it is lower than the price quoted above, then the lesser amount will be valid. Price quotes remain in effect for 90 days or until accepted by the procurement management team and become fixed upon award of the contract for the initial term of the contract, unless a lower (sale) price or negotiated price is agreed upon. Renewal options will allow for renegotiations of contract pricing. This contract will allow for the re-order of equipment, and for the purchase of other instrumentation, accessories, supplies, repair/replacement parts, equipment upgrades and other related commodities not herein specified. Pricing to be negotiated at the time of order.

4. Other Terms:

Reporting Contractors are responsible for compliance with all other contract reporting requirements including, but not limited to, Supplier Diversity Program (SDP) and other contract reports, as required by this contract.

Security and confidentiality The Contractor shall comply fully with all security procedures of the Commonwealth and Commonwealth Agencies in performance of the Contract. The Contractor shall not divulge to third parties any confidential information obtained by the Contractor or its agents, distributors, resellers, subcontractors, officers or employees in the course of performing Contract work, including, but not limited to, security procedures, business operations information, personally identifiable information, or commercial proprietary information in the possession of the Commonwealth Agency.

Orders

Effective July 1, 2014, all orders will be required to be placed through COMMBUYS

Online/web capability

Prior to the Contract Start Date, the Contractor will establish and enable a COMMBUYS-compatible online catalog, which may be hosted in COMMBUYS or by the Contractor. The catalog must utilize the Commonwealth commodity codes based on the United Nations Uniform Product and Service Code (UNSPSC) and must provide Eligible Entities with the capability to order only those products and/or services authorized by the vendor’s contract with the Commonwealth from the Contractor using COMMBUYS. The Contractor is required to maintain the catalog for the duration of the contract and must receive prior approval from the SSL before posting any updates or changes to the catalog, which must be consistent with the terms of the contract.

5. Audit:

During the term of this Agreement and for a period of six years thereafter, Department of State Police, its auditors, the Operational Services Division, the Office of the Inspector General or other authorized representatives shall be afforded access at reasonable times to Contractor's accounting records, including sales information on any system, reports or files, in order to audit all records relating to goods sold or services performed pursuant to this Agreement. If such an audit indicates that Contractor has materially overcharged Department of State Police, then the Contractor shall remit the overcharged amount and be responsible for payment of any costs associated with the audit.

6. Evaluation criteria

Bidder scores will be used to rank Bidders and will determine which Bidders will proceed to subsequent stages of the evaluation and/or enter into negotiations with the Commonwealth to receive a Contract award.

Mandatory requirements

Mandatory Specifications must be met in order for a Bid to be evaluated and may be used to disqualify Bidders. In addition, certain mandatory specifications have desirable components to them that may be evaluated by the SST. The SST reserves the right, in its discretion, to determine if non-compliance with a Mandatory Specification is insignificant or can be easily corrected.

Bid sections that include terms such as: “must”, “shall”, “will” and “required” are “mandatory.” Failure to meet the requirements of a mandatory specification without providing an alternate that is acceptable to the evaluators may result in the disqualification of a Bidder's proposal.

Alternatives

A Quote which fails to meet any material term or condition of the Bid, including the submission of required attachments, may lose points or be deemed unresponsive and disqualified. Unless otherwise specified, Bidders may submit Quotes proposing alternatives which provide equivalent, better or more cost effective performance than achievable under the stated Bid specifications. These alternatives may include related commodities or services that may be available to enhance performance during the period of the Contract. The Quote should describe how any alternative achieves substantially equivalent or better performance to that of the Bid specifications.

The SST will determine if a proposed alternative method of performance achieves substantially equivalent or better performance. The goal of this Bid is to provide the best value of commodities and/or services to achieve the goals of the procurement.

Evaluation Components

The following components will be some of the criteria considered by the SST when evaluating each Quote:

Price Please note that price will carry a significant weight in the evaluation process.

Pricing for all products MUST: (1) Be indicated on the Cost Sheet for each product indicated, and (2) Include all costs associated. No delivery charges will be permitted under this Contract.

The following price components will be evaluated:

Prompt Pay Discounts (PPD) – All Bidders must agree to offer discounts through participation in the Commonwealth Prompt Payment Discount (PPD) initiative for receiving early and/or on-time payments, unless the Bidder can provide compelling proof that it would be unduly burdensome. The PMT will assign additional points to bidders offering discounts.

Bidders must submit agreeable terms for Prompt Payment Discount unless otherwise specified by the PMT. The PMT will review, negotiate or reject the offering as deemed in the best interest of the Commonwealth.

Please note that the Prompt Pay Discount is mandatory and Bidders who fail to submit their Prompt Pay Discount may be removed from further consideration.

Supplier Diversity Plan (formerly Affirmative Market Plan) (minimum of 10% weight) Bidders responding to this RFR are required to submit a Supplier Diversity Plan. Requirements for the Supplier Diversity Plan are included in Section 9 Appendix 2.

Product Support - Bidders responding to RFR may use a PDF file to post

Warranty – Bidders responding to RFR may use a PDF file to post

Company experience – Bidders responding to RFR may use a PDF file to post

References and reference information and/or requirements – Bidders responding to RFR may use a PDF file to post

Ability to provide requested product – Bidders responding to RFR may use a PDF file to post

7. HOW TO SUBMIT A Quote Responses must be sent via the “Create Quote” functionality contained in COMMBUYS. For instructions concerning how to submit a Quote, please see Additional attachments for instructions.

Any submission which fails to meet the submission requirements of the RFR will be found non-responsive without further evaluation unless the evaluation team, at its discretion, determines that the non-compliance is insubstantial and can be corrected. In these cases, the evaluation team may allow the vendor to make minor corrections to the submission.

Assemble and upload in COMMBUYS the Bid Response Sheet with the attachments according to the Checklist. Response must contain any and all documentation & literature requested in this RFR. (PDF and Zipped files will be accepted)

Electronic Signatures: Quotes submitted via COMMBUYS must be signed electronically by the Bidder or the Bidder’s Agent by accepting the terms and conditions of the bid on the “Terms & Conditions” tab of the Bid in COMMBUYS. By selecting “Save & Continue” on the “Terms and Conditions” tab after accepting the terms and conditions of the bid, the submitter attests that s/he is an agent of the Bidder with authority to sign on the Bidder’s behalf, and that s/he has read and assented to each document’s terms.

Successful Bidders who agreed to the terms and conditions of these forms electronically via COMMBUYS online Quote submission tool must still submit the above forms with ink signatures within seven (7) calendar days of award notification or their contract may not be executed by the Commonwealth. Bidders who have previous contract(s) with the Commonwealth and have up-to-date, ink-signature versions of the Commonwealth Terms and Conditions and Request for Taxpayer Identification and Verification (Mass. Substitute W9 Form) on file with the Office of the State Comptroller may submit copies of the signed forms. However, a new Standard Contract Form and Contractor Authorized Signatory Listing with original ink signatures must be submitted for each new contract with the Commonwealth.

Bidders are required to monitor COMMBUYS for changes to the procurement calendar for this Bid.

8. Appendix 1 – General Procurement Information Alterations Bidders may not alter (manually or electronically) the Bid language or any Bid component files, except as directed in the RFR. Modifications to the body of the Bid, specifications, terms and conditions, or which change the intent of this Bid are prohibited and may disqualify a Quote.

Ownership of Submitted Quotes The SST shall be under no obligation to return any Quotes or materials submitted by a Bidder in response to this Bid. All materials submitted by Bidders become the property of the Commonwealth of Massachusetts and will not be returned to the Bidder. The Commonwealth reserves the right to use any ideas, concepts, or configurations that are presented in a Bidder’s Quote, whether or not the Quote is selected for Contract award.

Quotes stored on COMMBUYS in the encrypted lock-box are the file of record. Bidders retain access to a read-only copy of this submission via COMMBUYS, as long as their account is active. Bidders may also retain a traditional paper copy or electronic copy on a separate computer or network drive or separate media, such as CD or DVD, as a backup.

Prohibitions Bidders are prohibited from communicating directly with any employee of the procuring Department or any member of the SST regarding this RFR except as specified in this RFR, and no other individual Commonwealth employee or representative is authorized to provide any information or respond to any question or inquiry concerning this RFR. Bidders may contact the contact person using the contact information provided in the Header Information this Bid in the event that this RFR is incomplete or information is missing. Bidders experiencing technical problems accessing information or attachments stored on COMMBUYS should contact the COMMBUYS Helpdesk (see the document cover page for contact information).

In addition to the certifications found in the Commonwealth’s Standard Contract Form, by submitting a Quote, the Bidder certifies that the Quote has been arrived at independently and has been submitted without any communication, collaboration, or without any agreement, understanding or planned common course or action with, any other Bidder of the commodities and/or services described in the RFR.

Terms and Requirements Pertaining to Awarded Contracts

Commonwealth Tax Exemption – Invoices or invoices submitted to Massachusetts government entities must not include sales tax.

Contractor’s Contact Information – It is the Contractor’s responsibility to keep the Contractor’s Contract Manager information current. If this information changes, the Contractor must notify the Contract Manager by email immediately, using the address located in the Header Information of the Purchase Order or Master Blanket Purchase Order on COMMBUYS.

The Commonwealth assumes no responsibility if a Contractor’s designated email address is not current, or if technical problems, including those with the Contractor’s computer, network or internet service provider (ISP), cause e-mail communications between the Bidder and the SST to be lost or rejected by any means including email or spam filtering.

Publicity – Any Contractor awarded a contract under this Bid is prohibited from selling or distributing any information collected or derived from the Contract, including lists of participating Eligible Entities, Commonwealth employee names, telephone numbers or addresses, or any other information except as specifically authorized by the SST.

9. Appendix 2 - RFR - Required Specifications

In general, most of the required contractual stipulations are referenced in the Standard Contract Form and Instructions and the Commonwealth Terms and Conditions (either version). However, the following RFR provisions must appear in all Commonwealth competitive procurements conducted under 801 CMR 21.00:

The terms of 801 CMR 21.00: Procurement of Commodities and Services (and 808 CMR 1.00: Compliance, Reporting and Auditing for Human and Social Services, if applicable) are incorporated by reference into this RFR. Words used in this RFR shall have the meanings defined in 801 CMR 21.00 (and 808 CMR 1.00, if applicable). Additional definitions may also be identified in this RFR. Other terms not defined elsewhere in this document may be defined in OSD’s Glossary of Terms. Unless otherwise specified in this RFR, all communications, responses, and documentation must be in English, all measurements must be provided in feet, inches, and pounds and all cost proposals or figures in U.S. currency. All responses must be submitted in accordance with the specific terms of this RFR.

COMMBUYS Market Center. COMMBUYS is the official source of information for this Bid and is publicly accessible at no charge at www.commbuys.com. Information contained in this document and in COMMBUYS, including file attachments, and information contained in the related Bid Questions and Answers (Q&A), are all components of the Bid, as referenced in COMMBUYS, and are incorporated into the Bid and any resulting contract.

Bidders are solely responsible for obtaining all information distributed for this Bid via COMMBUYS. Bid Q&A supports Bidder submission of written questions associated with a Bid and publication of official answers.

It is each Bidder’s responsibility to check COMMBUYS for:

· Any amendments, addenda or modifications to this Bid, and

· Any Bid Q&A records related to this Bid.

The Commonwealth accepts no responsibility and will provide no accommodation to Bidders who submit a Quote based on an out-of-date Bid or on information received from a source other than COMMBUYS.

COMMBUYS Subscription. Bidders may elect to obtain a free COMMBUYS Seller subscription which provides value-added features, including automated email notification associated with postings and modifications to COMMBUYS records. However, in order to respond to a Bid, Bidders must register and maintain an active COMMBUYS Seller subscription account.

All Bidders submitting a Quote (previously referred to as Response) in response to this Bid (previously referred to as Solicitation) agree that, if awarded a contract: (1) they will maintain an active seller account in COMMBUYS; (2) they will, when directed to do so by the procuring entity, activate and maintain a COMMBUYS-enabled catalog using Commonwealth Commodity Codes; (3) they will comply with all requests by the procuring entity to utilize COMMBUYS for the purposes of conducting all aspects of purchasing and invoicing with the Commonwealth, as added functionality for the COMMBUYS system is activated; (4) Bidder understands and acknowledges that all references to the Comm-PASS website or related requirements throughout this RFR, shall be superseded by comparable requirements pertaining to the COMMBUYS website; and (6) in the event the Commonwealth adopts an alternate market center system, successful Bidders will be required to utilize such system, as directed by the procuring entity. Commonwealth Commodity Codes are based on the United Nations Standard Products and Services Code (UNSPSC).

The COMMBUYS system introduces new terminology, which bidders must be familiar with in order to conduct business with the Commonwealth. To view this terminology and to learn more about the COMMBUYS system, please visit the COMMBUYS Resource Center.

Multiple Quotes. Bidders may not submit Multiple Quotes in response to a Bid unless the RFR authorizes them to do so. If a Bidder submits multiple quotes in response to an RFR that does not authorize multiple responses, only the latest dated quote submitted prior to the bid opening date will be evaluated.

Quote Content. Bid specifications for delivery, shipping, billing and payment will prevail over any proposed Bidder terms entered as part of the Quote, unless otherwise specified in the Bid.

Supplier Diversity Program (SDP). Massachusetts Executive Order 524 established a policy to promote the award of state contracts in a manner that develops and strengthens Minority and Women Business Enterprises (M/WBEs) that resulted in the Supplier Diversity Program in Public Contracting. M/WBEs are strongly encouraged to submit responses to this RFR, either as prime vendors, joint venture partners or other type of business partnerships. Similarly, Executive Order 546 established the Service-Disabled Veteran-Owned Business Enterprise (SDVOBE) Program to encourage the participation of businesses owned and controlled by service-disabled veterans in all areas of state procurement and contracting, thereby including them in the SDP. All bidders must follow the requirements set forth in the SDP section of the RFR, which will detail the specific requirements relating to the prime vendor’s inclusion of M/WBEs and/or SDVOBEs. Bidders are required to develop creative initiatives to help foster new business relationships with M/WBEs and/or SDVOBEs within the primary industries affected by this RFR. In order to satisfy the compliance of this section and encourage bidder’s participation of SDP objectives, the Supplier Diversity Program (SDP) Plan for large procurements greater than $150,000 will be evaluated at 10% or more of the total evaluation. Once an SDP commitment, expressed as a percentage of contract revenues, is approved, the agency will then monitor the contractor’s performance, and use actual expenditures with SDO certified M/WBE contractors and the Center for Veterans Enterprise certified SDVOBEs to fulfill their own SDP expenditure benchmarks. M/WBE and SDVOBE participation must be incorporated into and monitored for all types of procurements regardless of size; however, submission of an SDP Plan is mandated only for large procurements over $150,000.

Unless otherwise specified in the RFR, the following SDP forms are required to be submitted by the deadlines noted below in order to meet the mandatory participation requirements of the SDP:

Supplier Diversity Program (SDP) Resources:

· Resources available to assist Prime Bidders in finding potential Minority Business Enterprises (MBE) and Women Business Enterprises (WBE) partners can be found at: www.mass.gov/sdp

· Resources available to assist Prime Bidders in finding potential Service-Disabled Veteran-Owned Business Enterprise (SDVOBE) partners can be found on the Operational Services Division’s SDO webpage at: www.mass.gov/sdo

· The Operational Services Division’s Supplier Diversity Program offers training on the SDP Plan requirements. The dates of upcoming trainings can be found at: http://www.mass.gov/anf/budget-taxes-and-procurement/procurement-info-and-res/osd-events-and-training/osd-training-and-outreach.html In addition, the SDP Webinar can be located on the SDP website at www.mass.gov/SDP.

Supplier Diversity Program Subcontracting Policies. In addition to the Subcontracting Policies (See Subcontracting Policies section below and see Section 9, Subcontracting By Contractor, in the Commonwealth Terms and Conditions) that apply to all subcontracted services, agencies may define specific required deliverables for a contractor’s SDP Plan, including, but not limited to, documentation necessary to verify subcontractor commitments and expenditures with Minority- or Women-Owned Business Enterprises (M/WBEs) and Service-Disabled Veteran-Owned Business Enterprises (SDVOBE) for the purpose of monitoring and enforcing commitments made in a contractor’s Supplier Diversity Program (SDP) Plan.

Agricultural Products Preference (only applicable if this is a procurement for Agricultural Products) - Chapter 123 of the Acts of 2006 directs the State Purchasing Agent to grant a preference to products of agriculture grown or produced using locally grown products. Such locally grown or produced products shall be purchased unless the price of the goods exceeds the price of products of agriculture from outside the Commonwealth by more than 10%. For purposes of this preference, products of agriculture are defined to include any agricultural, aquacultural, floricultural or horticultural commodities, the growing and harvesting of forest products, the raising of livestock, including horses, raising of domesticated animals, bees, fur-bearing animals and any forestry or lumbering operations.

Best Value Selection and Negotiation. The Strategic Sourcing Team or SST (formerly referred to as Procurement Management Team or PMT) may select the response(s) which demonstrates the best value overall, including proposed alternatives that will achieve the procurement goals of the department. The SST and a selected bidder, or a contractor, may negotiate a change in any element of contract performance or cost identified in the original RFR or the selected bidder’s or contractor’s response which results in lower costs or a more cost effective or better value than was presented in the selected bidder’s or contractor’s original response.

Bidder Communication. Bidders are prohibited from communicating directly with any employee of the procuring department or any member of the SST regarding this RFR except as specified in this RFR, and no other individual Commonwealth employee or representative is authorized to provide any information or respond to any question or inquiry concerning this RFR. Bidders may contact the contact person for this RFR in the event this RFR is incomplete or the bidder is having trouble obtaining any required attachments electronically through COMMBUYS.

Contract Expansion. If additional funds become available during the contract duration period, the department reserves the right to increase the maximum obligation to some or all contracts executed as a result of this RFR or to execute contracts with contractors not funded in the initial selection process, subject to available funding, satisfactory contract performance and service or commodity need.

Costs. Costs which are not specifically identified in the bidder’s response, and accepted by a department as part of a contract, will not be compensated under any contract awarded pursuant to this RFR. The Commonwealth will not be responsible for any costs or expenses incurred by bidders responding to this RFR.

Debriefing. Non-successful bidders may request a debriefing from the department that issued the RFR. Department debriefing procedures may be found in the RFR. Non-successful POS bidders aggrieved by the decision of a department must participate in a debriefing as a prerequisite to an administrative appeal.

Debriefing/Appeals: Administrative Appeals to Departments.. Non-successful bidders who participate in the debriefing process and remain aggrieved with the decision of the department may appeal that decision to the department head. Department appeal procedures may be found in the RFR.

Debriefing/Appeals: Administrative Appeals to OSD.. Non-successful bidders who participate in the department appeal process and remain aggrieved by the selection decision of the department may appeal the department decision to the Operational Services Division. The basis for an appeal to OSD is limited to the following grounds:

The competitive procurement conducted by the department failed to comply with applicable regulations and guidelines. These would be limited to the requirements of 801 CMR 21.00 or any successor regulations, the policies in the OSD Procurement Information Center, subsequent policies and procedures issued by OSD and the specifications of the RFR; or

2. There was a fundamental unfairness in the procurement process. The allegation of unfairness or bias is one that is easier to allege than prove, consequently, the burden of proof rests with the bidder to provide sufficient and specific evidence in support of its claim. OSD will presume that departments conducted a fair procurement absent documentation to the contrary.

Requests for an appeal must be sent to the attention of the Operational Services Division, Legal, Policy and Compliance Office, Room 1017, One Ashburton Place, Boston, MA 02108 and be received within fourteen (14) calendar days of the postmark of the notice of the department head’s decision on appeal. Appeal requests must specify in sufficient detail the basis for the appeal. Sufficient detail requires a description of the published policy or procedure which was applied and forms the basis for the appeal and presentation of all information that supports the claim under paragraphs 1 or 2 above. OSD reserves the right to reject appeal requests based on grounds other than those stated above or those submitted without sufficient detail on the basis for the appeal.

The decision of the Operational Services Division shall be rendered, in writing, setting forth the grounds for the decision within sixty (60) calendar days of receipt of the appeal request. Pending appeals to the Operational Services Division shall not prohibit the department from proceeding with executing contracts.

Electronic Communication/Update of Bidder’s/Contractor’s Contact Information. It is the responsibility of the prospective bidder and awarded contractor to keep current on COMMBUYS the email address of the bidder’s contact person and prospective contract manager, if awarded a contract, and to monitor that email inbox for communications from the SST, including requests for clarification. The SST and the Commonwealth assume no responsibility if a prospective bidder’s/awarded contractor’s designated email address is not current, or if technical problems, including those with the prospective bidder’s/awarded contractor’s computer, network or internet service provider (ISP) cause email communications sent to/from the prospective bidder/awarded contractor and the SST to be lost or rejected by any means including email or spam filtering.

Electronic Funds Transfer (EFT). All bidders responding to this RFR must agree to participate in the Commonwealth Electronic Funds Transfer (EFT) program for receiving payments, unless the bidder can provide compelling proof that it would be unduly burdensome. EFT is a benefit to both contractors and the Commonwealth because it ensures fast, safe and reliable payment directly to contractors and saves both parties the cost of processing checks. Contractors are able to track and verify payments made electronically through the Comptroller’s Vendor Web system. A link to the EFT application can be found on the OSD Forms page (www.mass.gov/osd). Additional information about EFT is available on the VendorWeb site (www.mass.gov/osc). Click on MASSfinance.

Successful bidders, upon notification of contract award, will be required to enroll in EFT as a contract requirement by completing and submitting the Authorization for Electronic Funds Payment Form to this department for review, approval and forwarding to the Office of the Comptroller. If the bidder is already enrolled in the program, it may so indicate in its response.