RFQW912PP20Q0058.pdf

STRUCTURAL UNIT

4101 JEFFERSON PLAZA NE

ALBUQUERQUE NM 87109-3435

TEL: FAX:

REQUEST FOR QUOTATIONS

(THIS IS NOT AN ORDER) 1

PAGE OF PAGES

1. REQUEST NO. 2. DATE ISSUED RATING

W912PP20Q0058 17-Jul-2020 5a. ISSUED BY

8. TO: NAME AND ADDRESS, INCLUDING ZIP CODE

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5a. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this

Request for Quotations must be completed by the quoter.

11. SCHEDULE (Include applicable Federal, State, and local taxes)

ITEM NO.

(a)

SUPPLIES/ SERVICES

(b)

QUANTITY

(c)

UNIT

(d)

UNIT PRICE

(e) (f)

SEE SCHEDULE

AMOUNT

% No. %

NOTE: Additional provisions and representations [ ] are [ ] are not attached.

13. NAME AND ADDRESS OF QUOTER (Street, City, County, State, and ZIP Code)

14. SIGNATURE OF PERSON AUTHORIZED TO

SIGN QUOTATION

15. DATE OF

QUOTATION

16. NAME AND TITLE OF SIGNER (Type or print) (Include area code)

TELEPHONE NO.

AUTHORIZED FOR LOCAL REPRODUCTION STANDARD FORM 18 (REV. 6-95)

PREVIOUS EDITION NOT USABLE Prescribed by GSA FAR (48 CFR) 53.215-1(a)

THIS RFQ X[ ] IS [ ] IS NOT A SMALL BUSINESS SET-ASIDE

6. DELIVER BY (Date)

SEE SCHEDULE

AND/OR DMS REG. 1

UNDER BDSA REG. 2

4. CERT. FOR NAT. DEF.3. REQUISITION/PURCHASE

REQUEST NO.

US ARMY ENGINEER DISTRICT, ALBUQUERQUE

4101 JEFFERSON PLAZA NE

ALBUQUERQUE NM 87109-3435

9. DESTINATION (Consignee and address, including ZIP Code)

7. DELIVERY

[ ]X FOB

DESTINATION

[ ] OTHER

(See Schedule)

27-Jul-2020(Date)

PLEASE FURNISH QUOTATIONS TO THE ISSUING OFFICE IN BLOCK 5a ON OR BEFORE CLOSE OF BUSINESS:10.

575-652-4135GLENDA D KOHLIEBER

(Name and Telephone no.) (No collect calls)5b. FOR INFORMATION CALL:

d. CALENDAR DAYSc. 30 CALENDAR DAYSb. 20 CALENDAR DAYS12. DISCOUNT FOR PROMPT PAYMENT a. 10 CALENDAR DAYS

W912PP20Q0058

Section B - Supplies or Services and Prices

SUBMISSION INSTRUCTIONS

Please submit offers to Stephanie Parra via e-mail at stephanie.n.parra@usace.army.mil

The Government intends to award a Firm, Fixed-Price service contract, resulting from this solicitation, utilizing Simplified Acquisition Procedures per FAR Part 13.

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 1 Job NDT Testing for HSS Bulkhead Inspections

FFP

Contractor shall furnish all labor, management, equipment, supplies, and materials needed for the subject project, in strict accordance with the attached Performance Work Statement and US Department of Labor Wage Determination. Price includes all applicable Federal, State, and Local taxes. Point of contact for this project is Adam Baros 505-343-6265.

FOB: Destination

PSC CD: H299

NET AMT

SAM

****************Note to Offeror****************

The System for Award Management (SAM) registration (formerly CCR) should be completed prior to award of any resultant contract from the RFQ. Failure to have this registration completed could cause delay of award or rejection of offer. To complete or update a SAM registration, go to www.sam.gov.

Please provide the following information with quote:

Dun & Bradstreet Number: ______________________ Federal Tax ID Number: ______________________

CAGE Code: ______________________

Section C - Descriptions and Specifications

PWS

PERFORMANCE WORK STATEMENT (PWS)

NDT Technician for Hydraulic Steel Structures (HSS) Inspections

PART 1

GENERAL INFORMATION

1.0 General: This is a non-personal contract to provide nondestructive testing (NDT) with all personnel, equipment, tools, materials, supervision and other items and services necessary to provide NDT testing of hydraulic steel structures (HSS) as described in Part 5 of this document. The Government will not exercise any supervision or control over the contract service providers performing the services herein. Such contract service providers shall be accountable solely to the Contractor who, in turn is responsible to the Government.

1.1 Description of Services/Introduction: The Contractor shall provide all personnel, equipment, supplies, facilities, transportation, tools, materials, supervision, miscellaneous items, and non-personal services necessary to provide nondestructive inspection testing of the hydraulic steel structures as defined in this Performance Work Statement, except for those items specified as Government furnished property and services.

1.2 Background: NDT services are required to assist in the inspection of hydraulic steel structures (HSS) by USACE Albuquerque District HSS Safety Program personnel.

1.3 Objectives:

Provide nondestructive testing on ten (10) hydraulic steel structures.

o One bulkhead at Santa Rosa Dam, NM.

o One bulkhead at Cochiti Dam, NM.

o Six vertical lift gates at Jemez Canyon Dam, NM.

o Two bulkheads at Conchas Lake, NM.

The nondestructive testing technician shall be a qualified Level II or Level III NDT inspector by standards set forth by The American Society for Nondestructive Testing (ANST), hereafter referred to as the “Inspector”. The inspector shall perform nondestructive testing such as weld quality verification, and steel thickness verification. Nondestructive methods may include, but are not limited to, ultrasonic, dye penetrant, magnetic particle, and eddy current. The Inspector shall accompany Government personnel on the inspection at locations and duration requested.

1.4 Scope: Provide an ASNT NDT Level II or Level III qualified inspector, to perform nondestructive testing on ten (10) hydraulic steel structures. The inspector shall submit a report for each inspection for the approval by the Government.

1.4.1 Performance Standards and Guideline Requirements: The nondestructive testing and nondestructive testing technician shall meet the following requirements:

a) The Inspector shall be qualified to perform the ultrasonic technique (UT), magnetic particle (MT), dye penetrant (DT), and eddy current (EC) methods at a minimum.

b) The NDT technician shall be currently certified as American Society for Nondestructive Testing (ASNT) NDT Level II or Level III.

c) The NDT technician shall be currently trained in accordance with 29 CFR 1910.146 and fall protection.

d) The contractor’s testing equipment shall be calibrated and operational on the day of inspection.

e) The contractor shall provide his/her own safety equipment appropriate, e.g. hardhat, safety shoes, fall protection harness, etc. Access is provided by the government.

The government will only pay for services received. The government will not be responsible for inexcusable delays on the behalf of the contractor for reasons such as untimely furnishing of personnel or equipment, underestimating the work force required, and any other contractor caused delays.

1.5 Period of Performance: The period of performance shall be for a total of five (5) calendar days. The Period of Performance reads as follows:

24 August 2020 – USACE Santa Rosa Dam, NM 25 August 2020 – USACE Jemez Canyon Dam, NM 26 August 2020 – USACE Cochiti Dam, NM 27-28 August 2020 – USACE Conchas Dam, NM

1.6 General Information:

1.6.1 Quality Control: The contractor shall develop and maintain an effective Quality Control Program (QCP) to ensure services are performed in accordance with this PWS. The contractor shall develop and implement procedures to identify, prevent, and ensure non-recurrence of defective services. The contractor’s QCP is the means by which he assures himself that his work complies with the requirement of the contract.

1.6.2 Quality Assurance: The Government shall evaluate the Contractor’s performance under this contract in accordance with the Quality Assurance Surveillance Plan (QASP). This plan is primarily focused on what the Government must do to ensure that the Contractor has performed in accordance with the performance standards. It defines how the performance standards will be applied, the frequency of surveillance, and the minimum satisfactory performance thresholds.

1.6.3 Recognized Holidays: Contractor is not required to perform services on the recognized holidays below.

New Year’s Day Labor Day Martin Luther King Jr.’s Birthday Columbus Day President’s Day Veteran’s Day Memorial Day Thanksgiving Day Independence Day Christmas Day

1.6.4 Hours of Operation: The Contractor is responsible for conducting business between the hours of 8:00am- 5:00pm Monday thru Friday, except Federal holidays, or when the Government facility is closed due to local or national emergencies, administrative closings, or similar Government directed facility closings. The Contractor must at all times maintain an adequate workforce for the uninterrupted performance of all tasks defined within this PWS when the Government facility is not closed for the above reasons. When hiring personnel, the Contractor shall keep in mind that the stability and continuity of the workforce are essential.

1.6.5 Place of Performance: The work to be performed under this contract will be performed at Santa Rosa Dam, Jemez Canyon Dam, Cochiti Dam, and Conchas Dam, New Mexico.

1.6.6 Type of Contract: The Government will award a firm, fixed-price contract.

1.6.7 Security Requirements: Contractor personnel will be continuously accompanied by District personnel during duty hours. Accordingly, no specific security requirements are required.

1.6.7.1 Physical Security: The Contractor shall be responsible for safeguarding all Government equipment, information and property provided for Contractor use. At the close of each work period, Government facilities, equipment, and materials shall be secured.

1.6.7.1.1 Per the guidelines mandated with the implementation of OPORD 2013-74: Integrating Antiterrorism and Operations Security (OPSEC) into the USACE Acquisition Process, the following OPSEC provisions apply to this requirement:

1.6.7.1.2 Access and General Protection/Security Policy and Procedures: All contractor and all associated sub-contractors employees shall comply with applicable installation, facility and area commander installation/facility access and local security policies and procedures (provided by government representative). The contractor shall also provide all information required for background checks or background investigation and to meet installation/facility access requirements to be accomplished by installation Provost Marshal Office, Director of Emergency Services or Security Office. Contractor workforce must comply with all personal identity verification requirements as directed by DOD, HQDA and/or local policy. In addition to the changes otherwise authorized by the changes clause of this contract, should the Force Protection Condition (FPCON) at any installation or facility change, the Government may require changes in contractor security matters or processes.

1.6.7.1.3 For contractors who do not require CAC, but require access to a DoD facility or installation: Contractor and all associated sub-contractors employees shall comply with adjudication standards and procedures using the National Crime Information Center Interstate Identification Index (NCIC-III) and Terrorist Screening Database (TSDB) (Army Directive 2014-05 / AR 190-13), applicable installation, facility and area commander installation/facility access and local security policies and procedures (provided by government representative, as NCIC and TSDB are available), or, at OCONUS locations, in accordance with status of forces agreements and other theater regulations.

1.6.7.1.4 Will be escorted in areas where they may be exposed to classified and/or sensitive materials and/or sensitive or restricted areas: All contract employees, including subcontractor employees who are not in possession of the appropriate security clearance or access privileges, will be escorted in areas where they may be exposed to classified and/or sensitive materials and/or sensitive or restricted areas.

1.6.7.1.5 Pre-screen candidates using E-Verify Program: The Contractor must pre-screen Candidates using the E-verify Program(http://www.uscis.gov/e-verify) website to meet the established employment eligibility requirements. The Vendor must ensure that the Candidate has two valid forms of Government issued identification prior to enrollment to ensure the correct information is entered into the E-verify system. An initial list of verified/eligible Candidates must be provided to the COR no later than 3 business days after the initial contract award.

1.6.8 Special Qualifications: Contractor shall follow the requirements documented in EM 385-1-1 version 2014.

1.6.9 Post Award Conference/Periodic Progress Meetings: The Contractor agrees to attend any post award conference convened by the contracting activity or contract administration office in accordance with Federal Acquisition Regulation Subpart 42.5. The Contracting Officer, Contracting Officer’s Representative (COR), and other Government personnel, as appropriate, may meet periodically with the Contractor to review the Contractor's performance. At these meetings the Contracting Officer will apprise the Contractor of how the Government views the Contractor's performance and the Contractor will apprise the Government of problems, if any, being experienced. Appropriate action shall be taken to resolve outstanding issues. These meetings shall be at no additional cost to the Government.

1.6.10 Contracting Officer’s Representative (COR): The COR monitors all technical aspects of the contract and assists in contract administration. The COR is authorized to perform the following functions: assure that the Contractor performs the technical requirements of the contract: perform inspections necessary in connection with contract performance: maintain written and oral communications with the Contractor concerning technical aspects of the contract: issue written interpretations of technical requirements, including Government drawings, designs, specifications: monitor Contractor's performance and notifies both the Contracting Officer and Contractor of any deficiencies; coordinate availability of Government furnished property, and provide site entry of Contractor personnel. If a COR is necessary, a letter of designation will be issued to the COR, a copy of which is sent to the Contractor, states the responsibilities and limitations of the COR, especially with regard to changes in cost or price, estimates or changes in delivery dates. The COR is not authorized to change any of the terms and conditions of the resulting contract.

1.6.11 Key Personnel: The follow personnel are considered key personnel by the Government:

- Adam Baros, EIT., USACE, Albuquerque District, Hydraulic Steel Structures Program Engineer- (505) 343-6265, Adam.R.Baros@usace.army.mil

The Contractor shall provide a Contract Manager who shall be responsible for the performance of the work. The name of this person, and an alternate who shall act for the Contractor when the manager is absent, shall be designated in writing to the Contracting Officer. The Contract Manager, or alternate, shall have full authority to act for the Contractor on all contract matters relating to daily operation of this contract. The Contract Manager, or alternate, shall be available between 7:00a.m. to 5:00p.m., Monday thru Friday, except Federal holidays, or when the Government facility is closed for administrative reasons.

1.6.12 Identification of Contractor Employees: All contract personnel attending meetings, and working in other situations where their Contractor status is not obvious to third parties, are required to identify themselves as such to avoid creating an impression in the minds of members of the public that they are Government officials.

They must also ensure that all documents or reports produced by Contractors are suitably marked as Contractor products or that Contractor participation is appropriately disclosed. Contractor personnel are not required to wear badges in the performance of this service. However, contractor personnel are required to wear high visibility safety vests when operating the rented equipment.

1.6.13 Contractor Travel: Contractor will be required to travel to locations indicated under section 1.6.5: Place of Performance from Contractor’s place of business. Upon completion of the hydraulic steel structures inspections the contractor will be released from the performance terms of this contract. Contractor will be authorized travel expenses consistent with the substantive provisions of the Joint Travel Regulation (JTR) and the limitation of funds specified in this contract. All travel requires Government approval/authorization and notification to the POR.

1.6.14 Other Direct Costs: Other direct costs include all fuel, per diem and labor for travel between the various inspection locations including lodging for contractor employees for the duration of the contract.

1.6.15 Data Rights: N/A.

PART 2

DEFINITIONS & ACRONYMS

2.0 Definitions and Acronyms:

2.1 Definitions:

2.1.1 Contractor: A supplier or vendor awarded a contract to provide specific supplies or service to the Government. The term used in this contract refers to the prime.

2.1.2 Contracting Officer (KO): A person with authority to enter into, administer, and or terminate contracts, and make related determinations and findings on behalf of the Government. Note: The only individual who can legally bind the Government.

2.1.3 Contracting Officer’s Representative (COR): An employee of the U.S. Government appointed by the Contracting Officer to administer the contract. Such appointment shall be in writing and shall state the scope of authority and limitations. This individual has authority to provide technical direction to the Contractor as long as that direction is within the scope of the contract, does not constitute a change, and has no funding implications. This individual does NOT have authority to change the terms and conditions of the contract.

2.1.4 Defective Service: A service output that does not meet the standard of performance associated with the Performance Work Statement.

2.1.5 Deliverable: Anything that can be physically delivered, but may include non-manufactured things such as meeting minutes or reports.

2.1.6 Key Personnel: Contractor personnel that are evaluated in a source selection process and that may be required to be used in the performance of a contract by the Key Personnel listed in the PWS. When key personnel are used as an evaluation factor in best value procurement, an offer can be rejected if it does not have a firm commitment from the persons that are listed in the proposal.

2.1.7 Physical Security: Actions that prevent the loss or damage of Government property.

2.1.8 Quality Assurance (QA): The Government procedures to verify that services being performed by the Contractor are performed according to acceptable standards.

2.1.9 Quality Assurance Surveillance Plan (QASP): An organized written document specifying the surveillance methodology to be used for surveillance of Contractor performance.

2.1.10 Quality Control (QC): All necessary measures taken by the Contractor to assure that the quality of an end product or service shall meet contract requirements.

2.1.11 Subcontractor: One that enters into a contract with a prime Contractor. The Government does not have privity of contract with the subcontractor.

2.1.12 Work Day: The number of hours per day the Contractor provides services in accordance with the contract.

2.1.13 Work Week: Monday through Friday, unless specified otherwise.

2.2 Acronyms:

ACOR Alternate Contracting Officer's Representative AFARS Army Federal Acquisition Regulation Supplement AR Army Regulation ASNT American Society for Nondestructive Testing CCE Contracting Center of Excellence CFR Code of Federal Regulations CONUS Continental United States (excludes Alaska and Hawaii) COR Contracting Officer Representative COTR Contracting Officer's Technical Representative COTS Commercial-Off-the-Shelf DA Department of the Army DD250 Department of Defense Form 250 (Receiving Report) DD254 Department of Defense Contract Security Requirement List DFARS Defense Federal Acquisition Regulation Supplement DMDC Defense Manpower Data Center DOD Department of Defense FAR Federal Acquisition Regulation HIPAA Health Insurance Portability and Accountability Act of 1996 HSS Hydraulic Steel Structures KO Contracting Officer OCI Organizational Conflict of Interest OCONUS Outside Continental United States (includes Alaska and Hawaii) ODC Other Direct Costs MT Magnetic Particle Testing NDT Nondestructive Testing PIPO Phase In/Phase Out POC Point of Contact PRS Performance Requirements Summary PWS Performance Work Statement QA Quality Assurance QAP Quality Assurance Program QASP Quality Assurance Surveillance Plan QC Quality Control QCP Quality Control Program SOW Scope of Work TE Technical Exhibit USACE U.S. Army Corps of Engineers UT Ultrasonic Testing

PART 3

GOVERNMENT FURNISHED PROPERTY, EQUIPMENT, AND SERVICES

3.0 Government Furnished Items and Services: The government will provide inspectors and access to facilitate the HSS NDT testing including rights of entry, and some inspection equipment essential to conduct NDT.

The government will not provide ultrasonic, magnetic particle or dye penetrant testing equipment, qualified NDT technician or personal protective equipment for NDT technician(s).

3.1 Services: The Government will not provide any services under this contract.

3.2 Facilities: The Government will not provide any facility’s under this contract.

3.3 Utilities: The Government will not provide any utilities under this contract.

3.4 Equipment: The Government will not provide any equipment under this contract.

3.5 Materials: The Government will not provide any materials under this contract.

PART 4

CONTRACTOR FURNISHED ITEMS AND SERVICES

4.0 Contractor Furnished Items and Responsibilities:

4.1 General: The Contractor shall furnish all supplies, equipment, facilities, personnel, and services required to perform work under this contract.

4.2 Materials: None

4.3 Equipment: The Contractor shall furnish all equipment and personnel required to perform work under this contract as described in Part 1 of this Performance Work Statement.

PART 5

SPECIFIC TASKS

5.0 Specific Tasks:

5.1 Basic Services: A nondestructive testing technician shall provide services at Santa Rosa Ram, Jemez Canyon Dam, Cochiti Dam, and Conchas Dam, New Mexico. Inspections at Conchas Dam will be outside adjacent to the lake and should not require special access equipment. Inspections at Cochiti and Santa Rosa Dam will be inside of the control towers and may require ladder access provided by the Government. The inspection at Jemez Canyon Dam will be inside of the regulating conduit under zero flow conditions. Access will be accompanied by Government personnel at all times.

The nondestructive testing technician must be a qualified Level II or Level III NDT inspector by standards set forth by the American Society for Nondestructive Testing (ASNT) standards, hereinafter referred to as the “Inspector”.

The Inspector shall be qualified to perform the following inspection methods at a minimum ultrasonic, magnetic particle, eddy current and dye penetrant tests. Testing will be on critical components of the HSS, in order to detect distressed areas. Distressed areas may include, but are not limited to, cracks, damage, wear, and thickness loss. All equipment shall be testing and calibrated prior to the inspection.

After all inspections have been conducted the Inspector shall provide the Government with a comprehensive report for each inspection. The reports shall include description of inspection, defects discovered, supporting photos, testing data collected, Inspector remarks/comments, and Inspector information including signature and certification number. The reports shall be submitted to the government no later than 14 days after the inspection. The reports will be subject to review and comment by the Government, the reports may need subsequent revision by the Inspector, and shall be then submitted no later than 7 days after comments have been submitted by the Government. Final payment is contingent on submission of inspection reports.

Approximate HSS Size:

(1) Santa Rosa Dam Bulkhead: 7.5-ft wide, 14.0-ft tall, and 18-in wide

(6) Jemez Dam Vertical Lift Gates: 6.5-ft wide, 13.0-ft tall, and 18-in wide

(1) Cochiti Dam Bulkhead: 8.5-ft wide, 14.5-ft tall, and 18-in wide

(2) Conchas Dam Bulkheads: 6.5-ft wide, 17.0-ft tall, and 12-in wide

Access to site:

Access will be provided by the Government at all sites. The inspector will be accompanied by Government personnel at all times.

The HSS inspection schedule is as follows:

HSS Location HSS Description Date of Services

Santa Rosa Lake, NM (1) bulkhead 24 August 2020

Jemez Canyon Dam, NM (6) vertical lift gates 25 August 2020

Cochiti Dam, NM (1) bulkhead 26 August 2020

Conchas Dam, NM (2) bulkheads 27-28 August 2020

PART 6

APPLICABLE PUBLICATIONS

6.0 Applicable Publications (Current Editions):

6.1 The Contractor must abide by all applicable regulations, publications, manuals, and local policies and procedures of USACE Safety Manual, EM 385 1-1 and 29 CFR 1926.

PART 7

ATTACHMENT/TECHNICAL EXHIBIT LISTING

7.0 Attachment/Technical Exhibit List:

7.1 Technical Exhibit 1 – Performance Requirements Summary

7.2 Technical Exhibit 2 – Deliverables Schedule

7.1 TECHNICAL EXHIBIT 1

Performance Requirements Summary The Contractor service requirements are summarized into performance objectives that relate directly to mission essential items. The performance threshold briefly describes the minimum satisfactory levels of service required for each requirement. These thresholds are critical to mission success.

Performance Objective

Standard Performance Threshold

Method of Surveillance

The Contractor shall provide an ASNT NDT Level II or Level III qualified technician and ultrasonic, magnetic particle, eddy current, and dye penetrant inspection equipment to perform NDT testing of HSS members.

Provide NDT technician and equipment on time, at the location specified and for the duration requested.

No deviation from the Standard.

100% Inspection

7.2 TECHNICAL EXHIBIT 2

SUBMITTAL SCHEDULE

Deliverable Frequency # of Copies Medium/Format Submit To One report for each of the inspection. Reports shall include all necessary descriptions, defects noted, supporting photos, and testing data collected.

**NOTE: See report details below.

First report submission shall be no later than 14 days after the final field inspection.

Upon initial submission, the report will be subject to review and comment by the Government, and may need revisions by the contractor.

Subsequent submissions, after initial submittal, shall be no later than 7 days after comments have been made by the Government.

1 Email delivery to:

Adam.R.Baros@usace .army.mil

Format: PDF file of report.

USACE,

Albuquerque District

REPORT DETAILS

Separate reports shall be submitted for each bulkhead inspection. That shall include, Santa Rosa bulkhead, Cochiti bulkhead, and Conchas bulkheads (2).

At the option of the awarded contractor, one report may be submitted for each conduit (3 total conduits) at the Jemez Canyon Dam inspection. Each conduit includes two (2) vertical lift gates, an emergency and service gate. If the contractor chooses to submit a single report for a conduit, the contractor must clearly describe the finding of each gate, this option will result in three (3) reports for the Jemez Canyon Dam inspection. If the contractor does not choose to submit a report for each conduit, they shall submit a report for each gate, resulting in a total of six (6) separate reports.

WAGE DETERMINATION GUADALUPE

"REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2015-5454 Daniel W. Simms Division of | Revision No.: 14 Director Wage Determinations| Date Of Last Revision: 06/06/2020 Note: Under Executive Order (EO) 13658 an hourly minimum wage of $10.80 for calendar year 2020 applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1 2015. If this contract is covered by the EO the contractor must pay all workers in any classification listed on this wage determination at least $10.80 per hour (or the applicable wage rate listed on this wage determination if it is higher) for all hours spent performing on the contract in calendar year 2020. The EO minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

State: New Mexico

Area: New Mexico Counties of De Baca Guadalupe Harding

**Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations 01011 - Accounting Clerk I 13.91 01012 - Accounting Clerk II 15.62 01013 - Accounting Clerk III 17.47 01020 - Administrative Assistant 27.93 01035 - Court Reporter 18.61 01041 - Customer Service Representative I 11.50 01042 - Customer Service Representative II 12.93 01043 - Customer Service Representative III 14.10 01051 - Data Entry Operator I 12.27 01052 - Data Entry Operator II 13.44 01060 - Dispatcher Motor Vehicle 20.13 01070 - Document Preparation Clerk 13.86 01090 - Duplicating Machine Operator 13.86 01111 - General Clerk I 11.35 01112 - General Clerk II 12.39 01113 - General Clerk III 13.90 01120 - Housing Referral Assistant 19.39 01141 - Messenger Courier 10.77 01191 - Order Clerk I 12.69 01192 - Order Clerk II 13.85 01261 - Personnel Assistant (Employment) I 16.05 01262 - Personnel Assistant (Employment) II 17.96 01263 - Personnel Assistant (Employment) III 20.02 01270 - Production Control Clerk 26.13 01290 - Rental Clerk 13.48 01300 - Scheduler Maintenance 15.54 01311 - Secretary I 15.54 01312 - Secretary II 17.39 01313 - Secretary III 19.39 01320 - Service Order Dispatcher 17.99 01410 - Supply Technician 27.93 01420 - Survey Worker 15.41

01460 - Switchboard Operator/Receptionist 12.08 01531 - Travel Clerk I 11.82 01532 - Travel Clerk II 12.76 01533 - Travel Clerk III 13.57 01611 - Word Processor I 13.85 01612 - Word Processor II 15.54 01613 - Word Processor III 17.39 05000 - Automotive Service Occupations 05005 - Automobile Body Repairer Fiberglass 19.87 05010 - Automotive Electrician 18.12 05040 - Automotive Glass Installer 15.82 05070 - Automotive Worker 15.82 05110 - Mobile Equipment Servicer 13.50 05130 - Motor Equipment Metal Mechanic 17.99 05160 - Motor Equipment Metal Worker 15.82 05190 - Motor Vehicle Mechanic 18.12 05220 - Motor Vehicle Mechanic Helper 13.62 05250 - Motor Vehicle Upholstery Worker 15.82 05280 - Motor Vehicle Wrecker 15.82 05310 - Painter Automotive 17.19 05340 - Radiator Repair Specialist 15.82 05370 - Tire Repairer 13.88 05400 - Transmission Repair Specialist 17.99 07000 - Food Preparation And Service Occupations 07010 - Baker 12.42 07041 - Cook I 11.30 07042 - Cook II 13.41 07070 - Dishwasher 9.36 07130 - Food Service Worker 9.48 07210 - Meat Cutter 17.68 07260 - Waiter/Waitress 9.01 09000 - Furniture Maintenance And Repair Occupations 09010 - Electrostatic Spray Painter 19.50 09040 - Furniture Handler 13.01 09080 - Furniture Refinisher 19.50 09090 - Furniture Refinisher Helper 16.40 09110 - Furniture Repairer Minor 19.64 09130 - Upholsterer 19.50 11000 - General Services And Support Occupations 11030 - Cleaner Vehicles 10.79 11060 - Elevator Operator 10.79 11090 - Gardener 16.56 11122 - Housekeeping Aide 11.29 11150 - Janitor 11.29 11210 - Laborer Grounds Maintenance 11.88 11240 - Maid or Houseman 10.27 11260 - Pruner 10.45 11270 - Tractor Operator 15.00 11330 - Trail Maintenance Worker 11.88 11360 - Window Cleaner 12.83 12000 - Health Occupations 12010 - Ambulance Driver 16.15 12011 - Breath Alcohol Technician 21.82 12012 - Certified Occupational Therapist Assistant 29.13 12015 - Certified Physical Therapist Assistant 23.12 12020 - Dental Assistant 16.62 12025 - Dental Hygienist 48.31 12030 - EKG Technician 33.12 12035 - Electroneurodiagnostic Technologist 33.12 12040 - Emergency Medical Technician 16.15 12071 - Licensed Practical Nurse I 19.54 12072 - Licensed Practical Nurse II 21.86 12073 - Licensed Practical Nurse III 24.36 12100 - Medical Assistant 13.76 12130 - Medical Laboratory Technician 22.85 12160 - Medical Record Clerk 14.98 12190 - Medical Record Technician 17.22 12195 - Medical Transcriptionist 19.20 12210 - Nuclear Medicine Technologist 48.02 12221 - Nursing Assistant I 11.82

12222 - Nursing Assistant II 13.29 12223 - Nursing Assistant III 14.50 12224 - Nursing Assistant IV 16.27 12235 - Optical Dispenser 15.40 12236 - Optical Technician 19.54 12250 - Pharmacy Technician 14.99 12280 - Phlebotomist 14.29 12305 - Radiologic Technologist 26.71 12311 - Registered Nurse I 25.39 12312 - Registered Nurse II 31.06 12313 - Registered Nurse II Specialist 31.06 12314 - Registered Nurse III 37.58 12315 - Registered Nurse III Anesthetist 37.58 12316 - Registered Nurse IV 45.04 12317 - Scheduler (Drug and Alcohol Testing) 25.50 12320 - Substance Abuse Treatment Counselor 24.28 13000 - Information And Arts Occupations 13011 - Exhibits Specialist I 17.35 13012 - Exhibits Specialist II 21.18 13013 - Exhibits Specialist III 25.33 13041 - Illustrator I 16.10 13042 - Illustrator II 19.95 13043 - Illustrator III 24.22 13047 - Librarian 22.91 13050 - Library Aide/Clerk 9.87 13054 - Library Information Technology Systems 20.67 Administrator 13058 - Library Technician 13.76 13061 - Media Specialist I 15.31 13062 - Media Specialist II 17.18 13063 - Media Specialist III 19.07 13071 - Photographer I 15.88 13072 - Photographer II 17.63 13073 - Photographer III 21.70 13074 - Photographer IV 24.30 13075 - Photographer V 29.39 13090 - Technical Order Library Clerk 15.49 13110 - Video Teleconference Technician 18.57 14000 - Information Technology Occupations 14041 - Computer Operator I 16.48 14042 - Computer Operator II 18.44 14043 - Computer Operator III 21.03 14044 - Computer Operator IV 23.39 14045 - Computer Operator V 26.77 14071 - Computer Programmer I (see 1) 22.41 14072 - Computer Programmer II (see 1) 26.14 14073 - Computer Programmer III (see 1) 14074 - Computer Programmer IV (see 1) 14101 - Computer Systems Analyst I (see 1) 14102 - Computer Systems Analyst II (see 1) 14103 - Computer Systems Analyst III (see 1) 14150 - Peripheral Equipment Operator 16.48 14160 - Personal Computer Support Technician 23.39 14170 - System Support Specialist 30.21 15000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (Non-Rated) 28.42 15020 - Aircrew Training Devices Instructor (Rated) 34.38 15030 - Air Crew Training Devices Instructor (Pilot) 41.21 15050 - Computer Based Training Specialist / Instructor 28.42 15060 - Educational Technologist 34.51 15070 - Flight Instructor (Pilot) 41.21 15080 - Graphic Artist 22.41 15085 - Maintenance Test Pilot Fixed Jet/Prop 40.31 15086 - Maintenance Test Pilot Rotary Wing 40.31 15088 - Non-Maintenance Test/Co-Pilot 40.31 15090 - Technical Instructor 22.85 15095 - Technical Instructor/Course Developer 29.49 15110 - Test Proctor 18.46 15120 - Tutor 18.46 16000 - Laundry Dry-Cleaning Pressing And Related Occupations

16010 - Assembler 11.00 16030 - Counter Attendant 11.00 16040 - Dry Cleaner 12.80 16070 - Finisher Flatwork Machine 11.00 16090 - Presser Hand 11.00 16110 - Presser Machine Drycleaning 11.00 16130 - Presser Machine Shirts 11.00 16160 - Presser Machine Wearing Apparel Laundry 11.00 16190 - Sewing Machine Operator 13.50 16220 - Tailor 14.19 16250 - Washer Machine 11.62 19000 - Machine Tool Operation And Repair Occupations 19010 - Machine-Tool Operator (Tool Room) 23.67 19040 - Tool And Die Maker 30.29 21000 - Materials Handling And Packing Occupations 21020 - Forklift Operator 16.12 21030 - Material Coordinator 26.13 21040 - Material Expediter 26.13 21050 - Material Handling Laborer 13.46 21071 - Order Filler 11.76 21080 - Production Line Worker (Food Processing) 16.12 21110 - Shipping Packer 16.29 21130 - Shipping/Receiving Clerk 16.29 21140 - Store Worker I 10.18 21150 - Stock Clerk 14.77 21210 - Tools And Parts Attendant 16.12 21410 - Warehouse Specialist 16.12 23000 - Mechanics And Maintenance And Repair Occupations 23010 - Aerospace Structural Welder 28.46 23019 - Aircraft Logs and Records Technician 21.16 23021 - Aircraft Mechanic I 26.66 23022 - Aircraft Mechanic II 28.46 23023 - Aircraft Mechanic III 30.12 23040 - Aircraft Mechanic Helper 17.55 23050 - Aircraft Painter 24.79 23060 - Aircraft Servicer 21.16 23070 - Aircraft Survival Flight Equipment Technician 24.79 23080 - Aircraft Worker 22.99 23091 - Aircrew Life Support Equipment (ALSE) Mechanic 22.99 I 23092 - Aircrew Life Support Equipment (ALSE) Mechanic 26.66

II

23110 - Appliance Mechanic 23.67 23120 - Bicycle Repairer 17.61 23125 - Cable Splicer 29.85 23130 - Carpenter Maintenance 19.38 23140 - Carpet Layer 21.95 23160 - Electrician Maintenance 25.84 23181 - Electronics Technician Maintenance I 25.16 23182 - Electronics Technician Maintenance II 27.32 23183 - Electronics Technician Maintenance III 29.47 23260 - Fabric Worker 20.20 23290 - Fire Alarm System Mechanic 27.16 23310 - Fire Extinguisher Repairer 18.50 23311 - Fuel Distribution System Mechanic 33.98 23312 - Fuel Distribution System Operator 25.80 23370 - General Maintenance Worker 15.68 23380 - Ground Support Equipment Mechanic 26.66 23381 - Ground Support Equipment Servicer 21.16 23382 - Ground Support Equipment Worker 22.99 23391 - Gunsmith I 18.50 23392 - Gunsmith II 21.95 23393 - Gunsmith III 25.46 23410 - Heating Ventilation And Air-Conditioning 20.00 Mechanic 23411 - Heating Ventilation And Air Contidioning 21.34 Mechanic (Research Facility) 23430 - Heavy Equipment Mechanic 26.91 23440 - Heavy Equipment Operator 21.80 23460 - Instrument Mechanic 27.47

23465 - Laboratory/Shelter Mechanic 23.67 23470 - Laborer 13.46 23510 - Locksmith 23.67 23530 - Machinery Maintenance Mechanic 29.77 23550 - Machinist Maintenance 24.93 23580 - Maintenance Trades Helper 15.20 23591 - Metrology Technician I 27.47 23592 - Metrology Technician II 29.34 23593 - Metrology Technician III 31.02 23640 - Millwright 25.46 23710 - Office Appliance Repairer 23.67 23760 - Painter Maintenance 19.21 23790 - Pipefitter Maintenance 22.95 23810 - Plumber Maintenance 21.34 23820 - Pneudraulic Systems Mechanic 25.46 23850 - Rigger 25.46 23870 - Scale Mechanic 21.95 23890 - Sheet-Metal Worker Maintenance 25.58 23910 - Small Engine Mechanic 17.79 23931 - Telecommunications Mechanic I 25.14 23932 - Telecommunications Mechanic II 26.83 23950 - Telephone Lineman 25.46 23960 - Welder Combination Maintenance 25.68 23965 - Well Driller 24.92 23970 - Woodcraft Worker 25.46 23980 - Woodworker 18.50 24000 - Personal Needs Occupations 24550 - Case Manager 17.12 24570 - Child Care Attendant 10.31 24580 - Child Care Center Clerk 14.77 24610 - Chore Aide 9.70 24620 - Family Readiness And Support Services 17.12 Coordinator 24630 - Homemaker 17.49 25000 - Plant And System Operations Occupations 25010 - Boiler Tender 25.46 25040 - Sewage Plant Operator 18.56 25070 - Stationary Engineer 25.46 25190 - Ventilation Equipment Tender 16.76 25210 - Water Treatment Plant Operator 18.56 27000 - Protective Service Occupations 27004 - Alarm Monitor 16.03 27007 - Baggage Inspector 13.05 27008 - Corrections Officer 17.77 27010 - Court Security Officer 17.70 27030 - Detection Dog Handler 14.60 27040 - Detention Officer 17.77 27070 - Firefighter 17.63 27101 - Guard I 13.05 27102 - Guard II 14.60 27131 - Police Officer I 22.38 27132 - Police Officer II 24.86 28000 - Recreation Occupations 28041 - Carnival Equipment Operator 15.25 28042 - Carnival Equipment Repairer 16.84 28043 - Carnival Worker 10.52 28210 - Gate Attendant/Gate Tender 13.60 28310 - Lifeguard 11.34 28350 - Park Attendant (Aide) 15.22 28510 - Recreation Aide/Health Facility Attendant 11.10 28515 - Recreation Specialist 18.84 28630 - Sports Official 12.11 28690 - Swimming Pool Operator 19.99 29000 - Stevedoring/Longshoremen Occupational Services 29010 - Blocker And Bracer 27.68 29020 - Hatch Tender 27.68 29030 - Line Handler 27.68 29041 - Stevedore I 25.47 29042 - Stevedore II 29.85 30000 - Technical Occupations

30010 - Air Traffic Control Specialist Center (HFO) (see 2) 39.89 30011 - Air Traffic Control Specialist Station (HFO) (see 2) 27.50 30012 - Air Traffic Control Specialist Terminal (HFO) (see 2) 30.29 30021 - Archeological Technician I 17.39 30022 - Archeological Technician II 19.50 30023 - Archeological Technician III 23.87 30030 - Cartographic Technician 24.17 30040 - Civil Engineering Technician 24.00 30051 - Cryogenic Technician I 23.79 30052 - Cryogenic Technician II 26.27 30061 - Drafter/CAD Operator I 17.39 30062 - Drafter/CAD Operator II 19.50 30063 - Drafter/CAD Operator III 21.75 30064 - Drafter/CAD Operator IV 25.91 30081 - Engineering Technician I 15.46 30082 - Engineering Technician II 17.36 30083 - Engineering Technician III 19.42 30084 - Engineering Technician IV 24.05 30085 - Engineering Technician V 29.43 30086 - Engineering Technician VI 35.61 30090 - Environmental Technician 21.45 30095 - Evidence Control Specialist 21.48 30210 - Laboratory Technician 22.61 30221 - Latent Fingerprint Technician I 23.79 30222 - Latent Fingerprint Technician II 26.27 30240 - Mathematical Technician 24.17 30361 - Paralegal/Legal Assistant I 20.44 30362 - Paralegal/Legal Assistant II 25.32 30363 - Paralegal/Legal Assistant III 30.98 30364 - Paralegal/Legal Assistant IV 37.48 30375 - Petroleum Supply Specialist 26.27 30390 - Photo-Optics Technician 24.17 30395 - Radiation Control Technician 26.27 30461 - Technical Writer I 21.48 30462 - Technical Writer II 26.27 30463 - Technical Writer III 31.78 30491 - Unexploded Ordnance (UXO) Technician I 25.35 30492 - Unexploded Ordnance (UXO) Technician II 30.67 30493 - Unexploded Ordnance (UXO) Technician III 36.76 30494 - Unexploded (UXO) Safety Escort 25.35 30495 - Unexploded (UXO) Sweep Personnel 25.35 30501 - Weather Forecaster I 25.29 30502 - Weather Forecaster II 30.77 30620 - Weather Observer Combined Upper Air Or (see 2) 21.75 Surface Programs 30621 - Weather Observer Senior (see 2) 24.17 31000 - Transportation/Mobile Equipment Operation Occupations 31010 - Airplane Pilot 30.67 31020 - Bus Aide 10.73 31030 - Bus Driver 17.17 31043 - Driver Courier 15.97 31260 - Parking and Lot Attendant 11.57 31290 - Shuttle Bus Driver 17.63 31310 - Taxi Driver 11.57 31361 - Truckdriver Light 17.63 31362 - Truckdriver Medium 19.26 31363 - Truckdriver Heavy 21.98 31364 - Truckdriver Tractor-Trailer 21.98 99000 - Miscellaneous Occupations 99020 - Cabin Safety Specialist 14.95 99030 - Cashier 10.39 99050 - Desk Clerk 10.57 99095 - Embalmer 26.66 99130 - Flight Follower 25.35 99251 - Laboratory Animal Caretaker I 11.13 99252 - Laboratory Animal Caretaker II 12.42 99260 - Marketing Analyst 24.11 99310 - Mortician 26.66 99410 - Pest Controller 17.07 99510 - Photofinishing Worker 13.32

99710 - Recycling Laborer 19.37 99711 - Recycling Specialist 25.07 99730 - Refuse Collector 17.70 99810 - Sales Clerk 11.98 99820 - School Crossing Guard 13.68 99830 - Survey Party Chief 24.05 99831 - Surveying Aide 21.87 99832 - Surveying Technician 22.06 99840 - Vending Machine Attendant 16.48 99841 - Vending Machine Repairer 21.37 99842 - Vending Machine Repairer Helper 15.39

Note: Executive Order (EO) 13706 Establishing Paid Sick Leave for Federal Contractors applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1 2017. If this contract is covered by the EO the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work up to 56 hours of paid sick leave each year. Employees must be permitted to use paid sick leave for their own illness injury or other health-related needs including preventive care; to assist a family member (or person who is like family to the employee) who is ill injured or has other health-related needs including preventive care; or for reasons resulting from or to assist a family member (or person who is like family to the employee) who is the victim of domestic violence sexual assault or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: Life accident and health insurance plans sick leave pension plans civic and personal leave severance pay and savings and thrift plans.

Minimum employer contributions costing an average of $4.54 per hour computed on the basis of all hours worked by service employees employed on the contract.

HEALTH & WELFARE EO 13706: Minimum employer contributions costing an average of $4.

22 per hour computed on the basis of all hours worked by service employees employed on the covered contracts. *

*This rate is to be used only when compensating employees for performance on an SCA-covered contract also covered by EO 13706 Establishing Paid Sick Leave for Federal Contractors. A contractor may not receive credit toward its SCA obligations for any paid sick leave provided pursuant to EO 13706.

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor 3 weeks after 5 years and 4 weeks after 15 years. Length of service includes the whole span of continuous service with the present contractor or successor wherever employed and with the predecessor contractors in the performance of similar work at the same Federal facility. (Reg. 29 CFR 4.173)

HOLIDAYS: A minimum of ten paid holidays per year: New Year's Day Martin Luther King Jr.'s Birthday Washington's Birthday Memorial Day Independence Day Labor Day Columbus Day Veterans' Day Thanksgiving Day and Christmas Day. (A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.) (See 29 CFR 4.174)

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE FOLLOWING:

1) COMPUTER EMPLOYEES: Under the SCA at section 8(b) this wage determination does not apply to any employee who individually qualifies as a bona fide executive administrative or professional employee as defined in 29 C.F.R. Part 541. Because most Computer System Analysts and Computer Programmers who are compensated at a rate not less than $27.63 (or on a salary or fee basis at a rate not less than $455 per week) an hour would likely qualify as exempt computer professionals (29 C.F.R. 541.

400) wage rates may not be listed on this wage determination for all occupations within those job families. In addition because this wage determination may not list a wage rate for some or all occupations within those job families if the survey data indicates that the prevailing wage rate for the occupation equals or exceeds $27.63 per hour conformances may be necessary for certain nonexempt employees. For example if an individual employee is nonexempt but nevertheless performs duties within the scope of one of the Computer Systems Analyst or Computer Programmer occupations for which this wage determination does not specify an SCA wage rate then the wage rate for that employee must be conformed in accordance with the conformance procedures described in the conformance note included on this wage determination.

Additionally because job titles vary widely and change quickly in the computer industry job titles are not determinative of the application of the computer professional exemption. Therefore the exemption applies only to computer employees who satisfy the compensation requirements and whose primary duty consists of:

(1) The application of systems analysis techniques and procedures including consulting with users to determine hardware software or system functional specifications;

(2) The design development documentation analysis creation testing or modification of computer systems or programs including prototypes based on and related to user or system design specifications;

(3) The design documentation testing creation or modification of computer programs related to machine operating systems; or

(4) A combination of the aforementioned duties the performance of which requires the same level of skills. (29 C.F.R. 541.400).

2) AIR TRAFFIC CONTROLLERS AND WEATHER OBSERVERS - NIGHT PAY & SUNDAY PAY: If you work at night as part of a regular tour of duty you will earn a night differential and receive an additional 10% of basic pay for any hours worked between 6pm and 6am.

If you are a full-time employed (40 hours a week) and Sunday is part of your regularly scheduled workweek you are paid at your rate of basic pay plus a Sunday premium of 25% of your basic rate for each hour of Sunday work which is not overtime (i.e. occasional work on Sunday outside the normal tour of duty is considered overtime work).

** HAZARDOUS PAY DIFFERENTIAL **

An 8 percent differential is applicable to employees employed in a position that represents a high degree of hazard when working with or in close proximity to ordnance explosives and incendiary materials. This includes work such as screening blending dying mixing and pressing of sensitive ordnance explosives and pyrotechnic compositions such as lead azide black powder and photoflash powder.

All dry-house activities involving propellants or explosives. Demilitarization modification renovation demolition and maintenance operations on sensitive ordnance explosives and incendiary materials. All operations involving re-grading and cleaning of artillery ranges.

A 4 percent differential is applicable to employees employed in a position that represents a low degree of hazard when working with or…