SOW_REV_1.pdf

Federal Bureau of Prisons AUSP Thomson Project 4B2E

December 02, 2016

Summary of Work & Bureau Procedures

Specification for Materials Project 4B2E Construct Rec. Cages

United States Department of Justice

AUSP Thomson

PROPERTY OF THE UNITED STATES GOVERNMENT

COPYING, DISSEMINATION, OR DISTRIBUTION OF THESE

DRAWINGS, PLANS, SPECIFICATIONS OR INFORMATION TO

UNAUTHORIZED USERS IS PROHIBITIED.

Do not remove this notice.

Properly destroy documents when no longer needed.

SUMMARY OF WORK & BUREAU PROCEDURES

Sensitive But Unclassified - SBU

SUMMARY OF WORK

Project Site

This project is to Construct Recreation Cages at AUSP Thomson 1100 One Mile Road Thomson, Illinois 61285.

The Vendor awarded this project shall furnish all woven wire panels and sally ports (i.e. locks, sliders, hardware and panels) listed below at minimum or greater specifications.

VENDER MATERIAL LISTS AND SPECIFICATIONS

1. WOVEN WIRE PANELS.

A. Materials

1. Wire mesh will be 2” X 2” X ¼” galvanized woven mesh.

2. Channel frames will be 2”W x 1 1/2”D x 12 Gauge channel and all mesh will penetrate frames and be welded secure.

Back of C channel will be covered by 2”W x 1 1/2”D x 12 Gauge channel making overall frame sizes 2” x 3”. All galva‐ nized. (See attached drawing pages A2 and A6 for details.)

2. PANEL SIZES WILL BE OVERALL OUTSIDE DEMENSIONS.

Quantity SIZE

224 10’4” X 4’4” 4 1’2” X 8’8” 4 1’4” X 8’8” 4 3’5” X 8’8” 8 5’6” X 4’4” 8 7’6” X 4’4” 8 3’6” X 4’4” 8 5’2” X 4’4” 40 9’8” X 4’4”

QUANTITY SIZE

32 7’9” X 4’4” 32 7’7” X 4’4” 8 10’ X 4’4” 64 3’8” X 10’4” 4 4’ X 4’

3. SALLYPORT ENTRANCE UNITS TO REC. CAGES

A. Materials

1. Wire mesh will be 2” X 2” X ¼” galvanized woven mesh.

2. Channel frames will be 2”W x 1 1/2”D x 12 Gauge chan-nel and all mesh will penetrate frames and be welded se-cure. Back of C channel will be covered by 2”W x 1 1/2”D x 12 Gauge channel making overall frame sizes 2” x 3”. All galvanized. (See attached drawing pages A2 and A6 for de-tails.

3. Order will include all hardware for 8 swing doors with 80 series locks with surface pulls for exteriors of doors. Also 14 sliding doors with 80 series locks, surface pulls, and all slid-ing door hardware. All hardware or components that are not galvanized should have suitable finish for outside use.

4 each-5’4” x 5’2” x 8’9” high with ceiling unit for single sally port.

12 each-8’4” x 5’2” x 8’9” high with ceiling unit for double sally port.

The total price will also include all crating and shipping.

Previously approved drawings are attached for clarity.

Warranty

The vendor will be required to correct any manufacturing defects discovered during installation.

Project Name: Project 4B2E- Construct Rec. Cages

Location: AUSP Thomson

Address: 1100 One Mile Road, Thomson, IL 61285

Owner: U.S. Department of Justice, Federal Bureau of Prisons

(FBOP)