Amendment_SF30_N6449824Q40120001_20240911.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

SEE PAGE 2.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 24

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 11-Sep-2024

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street , County, State and Zip Code) X N6449824Q4012

X 9B. DATED (SEE ITEM 11)

29-Jul-2024

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

11-Sep-2024

CODE

NAVAL SURFACE WARFARE CENTER PHILA

CODE 0223, CATHY HUGHES

CATHY.HUGHES5.CIV@US.NAVY.MIL

5001 SOUTH BROAD STREET

PHILADELPHIA PA 19112

N64498 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

N6449824Q4012

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 30 - BLOCK 14 CONTINUATION PAGE

The following have been added by full text:

The purpose of this amendment is as follows:

1) The Foundry Specification Sheet is hereby incorporated within Section J.

2) The descriptions of CLINs 1001, 2001, 3001, 4001 and 5001 are updated to specify that they include drop-off of containers.

3) A slightly revised Statement of Work is included.

4) The Wage Determination is hereby updated within Section H to the most current version.

5) The response due date is extended to 1700 EST local time on 25 Sep 2024.

SECTION A - SOLICITATION/CONTRACT FORM

The required response date/time has changed from 12-Aug-2024 05:00 PM to 25-Sep-2024 05:00 PM.

The following have been deleted:

SECTION B - SUPPLIES OR SERVICES AND PRICES

CLIN 1001

The CLIN description has changed from Pick-up, Weighing & Storage Yr1 to Drop-off,Pick-up, Weighing & Storage Yr1.

CLIN 2001

The CLIN description has changed from Pick-up, Weighing & Storage Yr2 to Drop-off,Pick-up, Weighing

CLIN 3001

The CLIN description has changed from Pick-up, Weighing & Storage Yr3 to Drop-off,Pick-up, Weighing

CLIN 4001

The CLIN description has changed from Pick-up, Weighing & Storage Yr4 to Drop-off,Pick-up, Weighing

CLIN 5001

The CLIN description has changed from Pick-up, Weighing & Storage Yr5 to Drop-off,Pick-up, Weighing

SECTION C - DESCRIPTIONS AND SPECIFICATIONS

The following have been modified:

Statement of Work (SOW) for Chips Conversion and Ingots for the Naval Foundry and Propeller Center

1.0 INTRODUCTION

1.0.1 The Naval Surface Warfare Center Philadelphia Division (NSWCPD) is a Department of Defense entity responsible for research and development, test and evaluation, engineering and fleet support organization for the Navy’s ships, submarines, military watercraft and unmanned vehicles. This requirement is for Naval Foundry and Propeller Center (NFPC) who is responsible for the design, manufacture, and repair propellers for the US Navy.

1.0.2 This contract is for non-personal services. It does not create employment rights with the U.S. Government whether actual, inherent, or implied.

1.0.3 Government / Contractor Relationship

(a) The services to be delivered under this contract are non-personal services and the parties recognize and agree that no employer-employee relationship exists or will exist under the contract between the Government and the Contractor's personnel. Therefore, it is in the best interest of the Government to provide both parties a full understanding of their respective obligations.

(b) The Contractor employees shall identify themselves as Contractor personnel by introducing themselves or being introduced as Contractor personnel and displaying distinguishable badges or other visible identification for meetings with Government personnel. In addition, Contractor personnel shall appropriately identify themselves as Contractor employees in telephone conversations and in formal and informal written correspondence.

(c) Contractor personnel under this contract shall not engage in any of the inherently Governmental functions listed at FAR Subpart 7.5 or DFARS Subpart 207.5.

(d) Employee Relationship:

1) The services to be performed under this contract do not require the Contractor or its personnel to exercise personal judgment and discretion on behalf of the Government. Rather the Contractor's personnel will act and exercise personal judgment and discretion on behalf of the Contractor.

2) Rules, regulations, directives, and requirements that are issued by the U. S. Navy and NSWCPD under its responsibility for good order, administration, and security are applicable to all personnel who enter a Government installation or who travel on Government transportation. This is not to be construed or interpreted to establish any degree of Government control that is inconsistent with a non-personal services contract.

(e) Inapplicability of Employee Benefits: This contract does not create an employer-employee relationship.

Accordingly, entitlements and benefits applicable to such relationships do not apply.

(f) Notice. It is the Contractor's, as well as the Government's, responsibility to monitor contract activities and notify the Contracting Officer if the Contractor believes that the intent of this Section has been or may be violated.

1) The Contractor should notify the Contracting Officer in writing within three (3) calendar days from the date of any incident that the Contractor considers to constitute a violation of this Section. The notice should include the date, nature, and circumstances of the conduct; the name, function, and activity of each Government employee or Contractor official or employee involved or knowledgeable about such conduct; identify any documents or substance of any oral communication involved in the conduct; and the estimate in time by which the Government must respond to this notice to minimize cost, delay, or disruption of performance.

2) The Contracting Officer will, within five (5) calendar days after receipt of notice, respond to the notice in writing. In responding, the Contracting Officer will either:

(i) Confirm the conduct is in violation and when necessary direct the mode of further performance,

(ii) Countermand any communication regarded as a violation,

(iii) Deny that the conduct constitutes a violation and when necessary direct the mode of further performance, or

(iv) In the event the notice is inadequate to make a decision, advise the Contractor what additional information is required, and establish the date by which it should be furnished by the Contractor.

1.1 BACKGROUND

The Philadelphia Naval Foundry currently produces Non Ferrous metal chips as a byproduct of their milling process during manufacturing. In an effort to conserve resources, the byproduct chips can be recycled and combined with raw materials to produce ingots which can be re-melted at NFPC to manufacture new items for upcoming projects.

1.2 SCOPE OF WORK

The contractor is responsible for picking up the byproduct chips from NFPC, weighing it at a nearby weigh station, delivering it to their facility, analyzing the chips, re-processing the chips to a usable ingot, and returning the ingot to

NFPC.

This requirement shall be awarded as a 5-year Fixed-Price (FP) Indefinite-Delivery/Indefinite-Quantity (IDIQ) contract utilizing Task Orders (TOs) pursuant to FAR 16.5. Exact quantities and delivery schedules shall be established at the TO level. The ordering period for this contract is sixty (60) months, with a period-of-performance not to exceed seventy-two (72) months. Please note the quantities below are the maximum quantities per year during the sixty (60) month ordering period.

2.0 APPLICABLE DOCUMENTS

2.1 Foundry Specification Sheet (FSS) Number P001 Rev. G.

2.2 North American Cargo Securement Standard. A copy of this standard can be found on the below:

https://www.fmcsa.dot.gov/sites/fmcsa.dot.gov/files/docs/Drivers_Handbook_Cargo_Securement.pdf

3.0 REQUIREMENTS

Year 1 CLINs

Description Max Quantity Per Year

Container Services – Drop-off, Pick-Up, Weighing & Storage

36 each

1002 Manufacture 60 inch Ingot 200,000 Lbs

1003 Manufacture 42 inch Ingot 120,000 Lbs

1004 Manufacture 24 inch Ingot 100,000 Lbs

Year 2 CLINs

Description Max Quantity Per Year

Container Services – Drop-off, Pick-Up, Weighing & Storage

36 each

2002 Manufacture 60 inch Ingot 200,000 Lbs

2003 Manufacture 42 inch Ingot 120,000 Lbs

2004 Manufacture 24 inch Ingot 100,000 Lbs

Year 3 CLINs

Description Max Quantity Per Year

Container Services – Drop-off, Pick-Up, Weighing & Storage

36 each

3002 Manufacture 60 inch Ingot 200,000 Lbs

3003 Manufacture 42 inch Ingot 120,000 Lbs

3004 Manufacture 24 inch Ingot 100,000 Lbs

Year 4 CLINs

Description Max Quantity Per Year

Container Services – Drop-off, Pick-Up, Weighing & Storage

36 each

4002 Manufacture 60 inch Ingot 200,000 Lbs

4003 Manufacture 42 inch Ingot 120,000 Lbs

4004 Manufacture 24 inch Ingot 100,000 Lbs

Year 5 CLINs

Description Max Quantity Per Year

Container Services – Drop-off, Pick-Up, Weighing & Storage

36 each

5002 Manufacture 60 inch Ingot 200,000 Lbs

5003 Manufacture 42 inch Ingot 120,000 Lbs

5004 Manufacture 24 inch Ingot 100,000 Lbs

3.1 Storage Containers

3.1.1 The contractor shall provide collection containers to NFPC capable of holding 20,000 lbs. (approximately 20 cubic yards). Upon issuance of the first Task Order, the Contractor shall deliver 2 collection containers (1 to each of the addresses listed in Section 6). The Contractor shall have a replacement empty collection container delivered when they pick-up a full container.

3.1.2 The collection container shall be watertight to assist in maintaining environmental compliance. The container must be in good condition and have the ability to secure the cargo fully during transport, so that it does not: leak, spill, fall through the vehicle, or otherwise become dislodged from the vehicle during transport to the melting facility in accordance with the North American Cargo Securement Standard Section 1.2. Any opening on the delivered collection container which was previously damaged must be foam filled anywhere there is a possibility of chip loss during transport. Any container which is not visibly acceptable and/or does not meet requested specification at delivery will be rejected and replacement will be rescheduled with no additional cost to the Government.

3.1.3 The storage containers shall be watertight to prevent industrial wastes from being deposited to the surface so as to drain to the onsite storm water collection system in violation of Sections 301, 307, and 402(b) of the Pennsylvania Clean Streams Law, the Act of June 22, 197, P.L. 1987, as amended and Title 25, Chapter 91, Section 91.34.

3.2 Pick-up, Weighing, and Storage Requirements

3.2.1 The contractor shall pick-up a storage container. The contractor shall drain the storage container of excess fluid before weighing of the contents. The contractor shall drain the excess fluid in accordance with Environmental Protection Agency (EPA), state, and federal law.

3.2.2 After the excess liquid has been successfully drained, the vendor shall transport the container to a nearby weigh station, weigh the container, provide the weight per CDRL A001, and store the container at a facility. The contractor shall provide the weight of the byproduct chips only. The weight cannot include the weight of the storage container.

3.2.3 It is acceptable if the contractor elects to utilize a subcontractor to store the container. The contractor shall ensure that the storage container is locked and secured from the public.

3.2.4 The contractor shall submit a melt report in accordance with CDRL A003. The melt report shall indicate the weight of the machine chips that the contractor has scheduled to melt.

3.3 Manufacturing Requirements

3.3.1 The material in the storage container is machine chips/turnings of Nickel Aluminum Bronze Copper Alloy C95800 contained within water soluble machining coolant. The contractor is required to smelt the machine chips to produce usable ingots.

3.3.2 The collected metal shall be processed into 60-inch diameter ingots weighing < 12,000 pounds each, 42-inch diameter ingots weighing 4,500 to 5,500 pounds each, or 24-inch diameter ingots weighing approximately 2,500 pounds each. Ingots shall be made with chemical, mechanical properties, and shape in accordance with FSS P001 Rev. E, stated in section 2.0, without variation.

3.3.3 The Government shall issue a task order under the IDIQ that shall specify the quantity and types of ingots that are to be produced. Prior to delivery, the contractor shall provide the chemical and mechanical testing report in accordance with CDRL A002 within 14 days after successful manufacture. Contractor shall not deliver the ingots without acceptance of the chemical and mechanical testing report. Shipment without proper authorization is at the contractor’s own risk. The Government bares no responsibility for the costs without proper authorization of the chemical and mechanical testing report. Specific performance and delivery instructions of the ingots shall be provided in the task order.

3.3.4 Ingots shall be marked with the vendor’s lot number and ingot weight and shipped in a covered flatbed trailer to facilitate unloading by bridge crane or fork truck.

3.4 Ordering Period End Notification

3.4.1 The Contractor shall inform the Government of the accumulated weight of byproduct chips 30 days prior to the end of each ordering period to allow the Government enough time to place an order for the manufacturing of ingots during that ordering period.

3.4.2 If any excess chips remain after the expiration of the contract, the Contractor shall inform the Government and await disposition instructions, which may include shipment back to the Government facility or Contractor disposal.

4.0 DATA REQUIREMENTS

4.1 Weight Report (CDRL A001)

4.1.1 The contractor is responsible for providing a report that details the weight of the byproduct chips after weighing them at a nearby weigh station. The contractor shall provide this report within 7 days after pick-up of a storage container at NFPC. Contractor’s format is acceptable.

4.2 Chemical and Mechanical Testing Report (CDRL A002)

4.2.1 The contractor shall provide signed certifications to NFPC metallurgy listing chemical analysis and mechanical testing results prior to shipment for review and acceptance. Contractor shall provide the report within 14 days after successful manufacture. No ingots shall be shipped until NFPC Metallurgy has provided acceptance in written correspondence via email, fax, or other means. A copy of the certifications shall accompany all ingot shipments.

This includes certifications of ASTM A36 lifting hook material.

4.3 Melt Report (CDRL A003)

4.3.1 The contractor is responsible for providing a report that details the weight of the machine chips that the contractor has scheduled to melt. The contractor shall provide this report within 7 days prior to a scheduled melt.

Contractor’s format is acceptable.

5.0 SECURITY REQUIREMENTS

5.1 The contractor shall be escorted onto the site, observed while they perform the work, and escorted off the site.

5.2 Escorted visit. Escorted visits are required for any person who is not assigned to NNSY/NFPC and/or does not have a valid security clearance. Visitors will be escorted at all time by an NFPC employee and no exposure to any classified open storage areas or material. Requests for escorted access must be submitted 5 working days prior to arrival. If it is service or maintenance that needs to be done or an emergency the request needs to be submitted immediately in order to allow for ample time for proper vetting of individual/individuals requesting access.

The requesting NFPC code/shop will coordinate the visit and security code 1123 will verify two forms of Government issued identification. The responsible code shall provide escort during the contractor’s visit.

Acceptable documents include:

US Birth Certificate (original) US Voters registration US Passport (Home Land security), Transportation Workers Identification Credential (TWIC) Naturalization paperwork Driver’s License Social Security Card

Installation Access for Visitors/Contractors

All visitors/contractors having a valid purpose for access shall submit a completed and signed Form 5512/1 to their identified Government sponsor 14 working days prior to the date of their required visit.

The entire document shall be completed and form dated/signed by the visitor/contractor.

Visitor/Contractor shall retain a copy of the form 5512/1 to present on the first day at the installation.

The visitor/contractor shall communicate all on-site day to day schedules and schedule changes to the NFPC base sponsor to be submitted to code 1123 in a detailed security plan.

Note: It is critical that start/end dates/work hours are identified, accurate, and short term visitors/contractors are not granted extended or after-hours access if not required Reporting to PNY-A for the first time.

Visitor/Contractor Responsibility

Visitor/Contractor shall report to the location designated by their sponsor (Security Office or other designated location, Pass and ID office) or if operating a Commercial Vehicle requiring inspection; to the Vehicle Inspection Station.

Visitor/Contractor shall present their completed and signed 5512/1.

The Sentry or Security Assistant shall verify vetting is cleared and issue the appropriate passes. If visitor/contractor has not completed the 5512/1 their access will be delayed until they correct the form.

Code 1123 will review request and when acceptable notify requesting NFPC code/shop to arrange visit.

5.3 Contractor Vehicle Parking: (OPNAV 5530.14E) All contractor commercial vehicles must be visually inspected at Lot 753 prior to entry into any NFPC buildings and are subject to random inspections anywhere on the compound.

Vehicles must clearly display an authorized company sign or logo including a company phone number. Vehicles must only be allowed in the compound for transportation of contractors' tools, parts, and materials to and from the work site with the exception of MILCON scope projects. Vehicles must be registered to the company and not to an individual. Parking of POV's is available at Lot 753, which is approximately one mile from the work site. Contractor shall ensure that their vehicles, including delivery trucks, have valid and current vehicle registration and insurance upon arrival to NFPC. Non-valid and outdated or missing vehicle registration and insurance shall result in denied facility access requiring the Contractor to reschedule delivery immediately at the contractor’s expense. Delivery drivers must present two forms of Government issued identification.

5.4 PEDs (Portable Electronic Devices) are not allowed in areas where work is being performed.

Should the Contractor require a laptop, tablet or other similar device on-site to fulfill the Scope of Work, the Contractor must complete an asset authorization form for each device and submit the devices to code 109 for inspection and approval prior to site access. The laptops cannot have camera capabilities. Procedures regarding laptop access are subject to change.

PEDs (Portable Electronic Devices) are PROHIBITED:

In Restricted Areas (Open Storage Confidential Areas, Secure Rooms, Vaults, etc.) and any location (office, trailer, shop, work area, etc.) where NAVSEA business is conducted.

PEDs are permitted in Personally Owned Vehicles parked outside of the Controlled Access Area. (General parking lots across the street.)

Cell Phones/Smart Watches/Fitness Bands/ Wireless Headsets and Speakers are permitted in outside areas of the CAA and where Naval Sea Systems Command (NAVSEA) business of a sensitive nature is NOT conducted. Cell Phones, Smart Watches, Fitness Bands or Wireless Headsets and Speakers are prohibited in the OSC Areas.

PEDs are PROHIBITED in Secure Rooms (regardless of where any of these areas are located), and in any meeting, discussion or forum where NAVSEA business of a sensitive nature is carried on.

Cellphone lockers/boxes will be placed at the entrance to facilities, or as close to the entrance as possible in order to facilitate this policy.

********CAA-Controlled Access Area is anywhere within the fence line********

5.5. The contractor shall adhere to the facility/base access guidance per the following website:

https://www.cnic.navy.mil/regions/cnrma/om/contractor_verification_system/faqs.html

5.6. The contractor shall ensure that only contractor employees who meet the security requirements stated below perform under this contract at the Government site (e.g. delivery drivers and passengers, etc.). The contractor shall propose and maintain a list of employees whom meet these requirements and be willing to submit this list to the Government, along with the necessary documentation to prove they meet them (e.g. the results of a contractor conducted background check, etc.), for the Government’s security vetting, to include any Government background check, and approval. Once vetted and approved, a list of approved contractor employees must be maintained for the entire period of performance of the contract (i.e. propose new employees, replace existing employees or provide updates to existing employees’ records, as necessary). A minimum of two employees, primary and backup, should be cleared by the Government to perform the necessary functions under this contract (e.g. proposed drivers of a delivery vehicle) throughout the entire period of performance of the contract. Contractors must have the ability to be granted access by ensuring current documentation is available at the submission of their proposal to allow background checks for any proposed driver and passenger under the following criteria:

Felony conviction of any type within 10 years, or felony arrest that has not been adjudicated yet (includes "deferred findings").

Misdemeanor conviction or on-base arrest within 5 years, for any of the following types of crimes (includes "deferred findings"): Crimes of violence, sexual assault, larceny, drugs, or a habitual offender.

On the Sex Offender Registry.

Is barred from any Navy installation.

If a contractor’s employee is denied entry at delivery due to inaccurate or outdated personal and/or vehicle documentation, the Government is absolved of any costs accrued as a result of the denial and the contractor is still pledged to fulfill the contract requirements. Failure to fulfill the contract requirement may result in a termination for default pursuant to FAR 49.4.

5.7 OPERATIONS SECURITY (OPSEC)

The Contractor shall protect critical information associated with this contract to prevent unauthorized disclosure.

NFPC’s Critical Information List, (CIL) will be provided on site, if warranted. Performance under this contract requires the contractor to adhere to OPSEC requirements. The Contractor may not impose OPSEC requirements on its subcontractors unless NFPC approves the OPSEC requirements. During the period of this contract, the Contractor may be exposed to, use, or produce, NFPC Critical Information (CI) and/or observables and indicators which may lead to discovery of CI. NFPC CI will not be distributed to unauthorized third parties, including foreign governments, or companies under Foreign Ownership, Control, or Influence (FOCI) ) unless such FOCI has been appropriately mitigated through measures approved by the Defense Counterintelligence and Security Agency.

CUI correspondence transmitted internally on the contractor's unclassified networks or information systems, and externally, shall be protected per NIST SP-800-171, Protecting Controlled Unclassified Information (CUI) in Non-federal Systems and Organizations.

Assembled large components/systems being transported to and from testing areas, other production or government facilities (whether or not on public roadways) shall be in an enclosed van trailer or covered flatbed trailer.

Component/System outside storage, staging, and test areas shall be shielded/obscured from public view wherever physically possible.

NFPC’s CI shall not be publicized in corporate wide newsletters, trade magazines, displays, intranet pages or public facing websites. Media requests related to this project shall be directed to the PCO, and the COR who will forward the required to the NFPC Public Release Authority for review.

Any attempt by unauthorized third parties to solicit, obtain, photograph, or record, or; incidents of loss/compromise of government Classified or CI, Business Sensitive, Company Proprietary information related to this or other program must be immediately reported to the contractor's Facility Security Officer and Cognizant Security Office and/or the Naval Criminal Investigative Service, and the NFPC Security Division (Code 1123). Questions concerning these requirements shall be directed to the PCO, and the COR who will forward the request to the NFPC Security Division (Code 1123).

5.8 RECEIPT, STORAGE, AND GENERATION OF CONTROLLED UNCLASSIFIED INFORMATION

(CUI)

All Controlled Unclassified Information (CUI) associated with this contract must follow the minimum marking requirements of DoDI 5200.48, Section 3, paragraph 3.4.a, and include the acronym "CUI" in the banner and footer of the document. In accordance with DoDI 5200.48, CUI must be safeguarded to prevent Unauthorized Disclosure (UD). CUI export controlled technical information or other scientific, technical, and engineering information must be marked with an export control warning as directed in DoDI 5230.24, DoDD 5230.25, and Part 250 of Title 32, CFR. Nonfederal information systems storing and processing CUI shall be protected per NIST SP-800-171, or subsequent revisions. All transmissions to personal email accounts (AOL, Yahoo, Hotmail, Comcast, etc.) and posting on social media websites (Facebook, Instagram, Twitter, LinkedIn, etc.) are prohibited. Destroy CUI associated with this contract by any of the following approved methods: A cross-cut shredder; a certified commercial destruction vendor; a central destruction facility; incineration; chemical decomposition; pulverizing, disintegration;

or methods approved for classified destruction.

6.0 PLACE OF PERFORMANCE

The contractor is responsible for delivery of the storage containers, pick-up of the chips, and delivery of the ingots to either of the following locations. The specific location will be determined at the Task Order level.

LOCATION# 1 LOCATION# 2

Bldg. 1029 Bldg. 546 1750 Kitty Hawk Ave. 1701 Kitty Hawk Ave.

Philadelphia PA 19112 Philadelphia PA 19112

7.0 TRAVEL

Not applicable.

8.0 GOVERNMENT FURNISHED PROPERTY

9.0 GOVERNMENT FURNISHED INFORMATION

9.1 Foundry Specification Sheet (FSS) Number P001 Rev. G.

10.0 PURCHASES

11.0 COUNTERFEIT MATERIAL PREVENTION

11.1 Non-Electronic Materiels

11.1.1 Department of the Navy contractors (and their subcontractors at all tiers) who obtain critical or high risk materiel shall implement a risk mitigation process as follows:

11.1.1.1 If the materiel is currently in production or currently available, materiel shall be obtained only from authorized suppliers

11.1.1.2 If the materiel is not in production or currently available from authorized suppliers, materiel shall be obtained from suppliers that meet appropriate counterfeit avoidance criteria

11.1.1.3 Contractor shall notify the contracting officer when critical or high risk materiel cannot be obtained from an authorized supplier;

11.1.1.4 Contractor shall take mitigating actions to authenticate the materiel if purchased from an unauthorized supplier

11.1.1.5 Contractor shall report instances of counterfeit and suspect counterfeit materiel to the contracting officer and the GIDEP as soon as the contractor becomes aware of the issue.

12.0 PERSONNEL

13.0 NSWCPD ELECTRONIC COST REPORTING AND FINANCIAL TRACKING (ECRAFT) SYSTEM

14.0 SPECIAL REQUIREMENTS

SECTION H - SPECIAL CONTRACT REQUIREMENTS

SCA WAGE DETERMINATION

"REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2015-4233 Daniel W. Simms Division of | Revision No.: 30

Director Wage Determinations| Date Of Last Revision: 07/22/2024

Note: Contracts subject to the Service Contract Act are generally required to pay at least the applicable minimum wage rate required under Executive Order 14026 or Executive Order 13658.

|If the contract is entered into on or |Executive Order 14026 generally applies to | |after January 30, 2022, or the |the contract. | |contract is renewed or extended (e.g., |The contractor must pay all covered workers | |an option is exercised) on or after |at least $17.20 per hour (or the applicable | |January 30, 2022: |wage rate listed on this wage determination,| | |if it is higher) for all hours spent | | |performing on the contract in 2024. | |If the contract was awarded on or |Executive Order 13658 generally applies to | |between January 1, 2015 and January 29,|the contract. | |2022, and the contract is not renewed |The contractor must pay all covered workers | |or extended on or after January 30, |at least $12.90 per hour (or the applicable | |2022: |wage rate listed on this wage determination,| | |if it is higher) for all hours spent | | |performing on the contract in 2024. |

The applicable Executive Order minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the Executive Orders is available at www.dol.gov/whd/govcontracts.

State: Pennsylvania

Area: Pennsylvania Counties of Delaware, Philadelphia

**Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations 01011 - Accounting Clerk I 18.71 01012 - Accounting Clerk II 20.99 01013 - Accounting Clerk III 23.48 01020 - Administrative Assistant 35.46 01035 - Court Reporter 32.96 01041 - Customer Service Representative I 17.16*** 01042 - Customer Service Representative II 18.72 01043 - Customer Service Representative III 21.03 01051 - Data Entry Operator I 17.92 01052 - Data Entry Operator II 19.55 01060 - Dispatcher, Motor Vehicle 23.00 01070 - Document Preparation Clerk 19.15 01090 - Duplicating Machine Operator 19.15 01111 - General Clerk I 17.43 01112 - General Clerk II 19.02 01113 - General Clerk III 21.34

01120 - Housing Referral Assistant 24.90 01141 - Messenger Courier 17.15*** 01191 - Order Clerk I 17.36 01192 - Order Clerk II 18.94 01261 - Personnel Assistant (Employment) I 19.22 01262 - Personnel Assistant (Employment) II 21.50 01263 - Personnel Assistant (Employment) III 23.98 01270 - Production Control Clerk 25.02 01290 - Rental Clerk 18.91 01300 - Scheduler, Maintenance 19.96 01311 - Secretary I 19.96 01312 - Secretary II 22.33 01313 - Secretary III 24.90 01320 - Service Order Dispatcher 20.56 01410 - Supply Technician 35.46 01420 - Survey Worker 21.96 01460 - Switchboard Operator/Receptionist 17.50 01531 - Travel Clerk I 19.82 01532 - Travel Clerk II 20.94 01533 - Travel Clerk III 22.51 01611 - Word Processor I 17.49 01612 - Word Processor II 19.63 01613 - Word Processor III 21.96 05000 - Automotive Service Occupations 05005 - Automobile Body Repairer, Fiberglass 24.93 05010 - Automotive Electrician 25.33 05040 - Automotive Glass Installer 24.26 05070 - Automotive Worker 24.26 05110 - Mobile Equipment Servicer 22.03 05130 - Motor Equipment Metal Mechanic 26.31 05160 - Motor Equipment Metal Worker 24.26 05190 - Motor Vehicle Mechanic 26.31 05220 - Motor Vehicle Mechanic Helper 20.74 05250 - Motor Vehicle Upholstery Worker 23.21 05280 - Motor Vehicle Wrecker 24.26 05310 - Painter, Automotive 25.33 05340 - Radiator Repair Specialist 24.26 05370 - Tire Repairer 18.02 05400 - Transmission Repair Specialist 26.31 07000 - Food Preparation And Service Occupations 07010 - Baker 16.79*** 07041 - Cook I 18.22 07042 - Cook II 20.07 07070 - Dishwasher 14.53*** 07130 - Food Service Worker 14.70*** 07210 - Meat Cutter 21.72 07260 - Waiter/Waitress 15.16*** 09000 - Furniture Maintenance And Repair Occupations 09010 - Electrostatic Spray Painter 23.60 09040 - Furniture Handler 17.39 09080 - Furniture Refinisher 22.88 09090 - Furniture Refinisher Helper 19.50 09110 - Furniture Repairer, Minor 21.21 09130 - Upholsterer 19.43 11000 - General Services And Support Occupations

11030 - Cleaner, Vehicles 16.30*** 11060 - Elevator Operator 16.30*** 11090 - Gardener 22.39 11122 - Housekeeping Aide 17.20 11150 - Janitor 17.20 11210 - Laborer, Grounds Maintenance 18.31 11240 - Maid or Houseman 16.32*** 11260 - Pruner 16.90*** 11270 - Tractor Operator 21.08 11330 - Trail Maintenance Worker 18.31 11360 - Window Cleaner 18.63 12000 - Health Occupations 12010 - Ambulance Driver 20.39 12011 - Breath Alcohol Technician 27.04 12012 - Certified Occupational Therapist Assistant 30.58 12015 - Certified Physical Therapist Assistant 30.58 12020 - Dental Assistant 23.24 12025 - Dental Hygienist 44.64 12030 - EKG Technician 31.06 12035 - Electroneurodiagnostic Technologist 31.06 12040 - Emergency Medical Technician 20.39 12071 - Licensed Practical Nurse I 24.17 12072 - Licensed Practical Nurse II 27.04 12073 - Licensed Practical Nurse III 30.15 12100 - Medical Assistant 20.91 12130 - Medical Laboratory Technician 30.90 12160 - Medical Record Clerk 21.22 12190 - Medical Record Technician 23.74 12195 - Medical Transcriptionist 21.18 12210 - Nuclear Medicine Technologist 47.74 12221 - Nursing Assistant I 14.28*** 12222 - Nursing Assistant II 16.07*** 12223 - Nursing Assistant III 17.54 12224 - Nursing Assistant IV 19.68 12235 - Optical Dispenser 21.62 12236 - Optical Technician 19.88 12250 - Pharmacy Technician 18.46 12280 - Phlebotomist 22.54 12305 - Radiologic Technologist 37.69 12311 - Registered Nurse I 29.51 12312 - Registered Nurse II 33.65 12313 - Registered Nurse II, Specialist 33.65 12314 - Registered Nurse III 40.71 12315 - Registered Nurse III, Anesthetist 40.71 12316 - Registered Nurse IV 48.80 12317 - Scheduler (Drug and Alcohol Testing) 33.50 12320 - Substance Abuse Treatment Counselor 26.13 13000 - Information And Arts Occupations 13011 - Exhibits Specialist I 23.56 13012 - Exhibits Specialist II 29.19 13013 - Exhibits Specialist III 35.71 13041 - Illustrator I 22.94 13042 - Illustrator II 30.61 13043 - Illustrator III 37.43 13047 - Librarian 33.04

13050 - Library Aide/Clerk 16.83*** 13054 - Library Information Technology Systems 29.84 Administrator 13058 - Library Technician 20.96 13061 - Media Specialist I 21.53 13062 - Media Specialist II 24.08 13063 - Media Specialist III 26.85 13071 - Photographer I 20.00 13072 - Photographer II 22.37 13073 - Photographer III 27.72 13074 - Photographer IV 33.91 13075 - Photographer V 41.02 13090 - Technical Order Library Clerk 19.49 13110 - Video Teleconference Technician 24.94 14000 - Information Technology Occupations 14041 - Computer Operator I 23.42 14042 - Computer Operator II 26.19 14043 - Computer Operator III 29.21 14044 - Computer Operator IV 32.45 14045 - Computer Operator V 35.94 14071 - Computer Programmer I (see 1) 14072 - Computer Programmer II (see 1) 14073 - Computer Programmer III (see 1) 14074 - Computer Programmer IV (see 1) 14101 - Computer Systems Analyst I (see 1) 14102 - Computer Systems Analyst II (see 1) 14103 - Computer Systems Analyst III (see 1) 14150 - Peripheral Equipment Operator 23.42 14160 - Personal Computer Support Technician 32.45 14170 - System Support Specialist 35.94 15000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (Non-Rated) 33.89 15020 - Aircrew Training Devices Instructor (Rated) 41.01 15030 - Air Crew Training Devices Instructor (Pilot) 49.16 15050 - Computer Based Training Specialist / Instructor 33.89 15060 - Educational Technologist 36.59 15070 - Flight Instructor (Pilot) 49.16 15080 - Graphic Artist 29.40 15085 - Maintenance Test Pilot, Fixed, Jet/Prop 49.16 15086 - Maintenance Test Pilot, Rotary Wing 49.16 15088 - Non-Maintenance Test/Co-Pilot 49.16 15090 - Technical Instructor 27.58 15095 - Technical Instructor/Course Developer 33.72 15110 - Test Proctor 22.25 15120 - Tutor 22.25 16000 - Laundry, Dry-Cleaning, Pressing And Related Occupations 16010 - Assembler 16.55*** 16030 - Counter Attendant 16.55*** 16040 - Dry Cleaner 18.92 16070 - Finisher, Flatwork, Machine 16.55*** 16090 - Presser, Hand 16.55*** 16110 - Presser, Machine, Drycleaning 16.55*** 16130 - Presser, Machine, Shirts 16.55*** 16160 - Presser, Machine, Wearing Apparel, Laundry 16.55*** 16190 - Sewing Machine Operator 19.71

16220 - Tailor 20.50 16250 - Washer, Machine 17.34 19000 - Machine Tool Operation And Repair Occupations 19010 - Machine-Tool Operator (Tool Room) 26.94 19040 - Tool And Die Maker 30.94 21000 - Materials Handling And Packing Occupations 21020 - Forklift Operator 23.73 21030 - Material Coordinator 25.02 21040 - Material Expediter 25.02 21050 - Material Handling Laborer 19.30 21071 - Order Filler 17.46 21080 - Production Line Worker (Food Processing) 23.73 21110 - Shipping Packer 20.40 21130 - Shipping/Receiving Clerk 20.40 21140 - Store Worker I 19.07 21150 - Stock Clerk 24.21 21210 - Tools And Parts Attendant 23.73 21410 - Warehouse Specialist 23.73 23000 - Mechanics And Maintenance And Repair Occupations 23010 - Aerospace Structural Welder 38.46 23019 - Aircraft Logs and Records Technician 32.63 23021 - Aircraft Mechanic I 36.98 23022 - Aircraft Mechanic II 38.46 23023 - Aircraft Mechanic III 39.83 23040 - Aircraft Mechanic Helper 29.16 23050 - Aircraft, Painter 35.61 23060 - Aircraft Servicer 32.63 23070 - Aircraft Survival Flight Equipment Technician 35.61 23080 - Aircraft Worker 34.11 23091 - Aircrew Life Support Equipment (ALSE) Mechanic 34.11 I 23092 - Aircrew Life Support Equipment (ALSE) Mechanic 36.98

II

23110 - Appliance Mechanic 25.05 23120 - Bicycle Repairer 18.27 23125 - Cable Splicer 51.87 23130 - Carpenter, Maintenance 28.93 23140 - Carpet Layer 27.91 23160 - Electrician, Maintenance 34.93 23181 - Electronics Technician Maintenance I 31.86 23182 - Electronics Technician Maintenance II 33.26 23183 - Electronics Technician Maintenance III 34.55 23260 - Fabric Worker 29.13 23290 - Fire Alarm System Mechanic 29.60 23310 - Fire Extinguisher Repairer 27.65 23311 - Fuel Distribution System Mechanic 39.36 23312 - Fuel Distribution System Operator 32.96 23370 - General Maintenance Worker 23.14 23380 - Ground Support Equipment Mechanic 36.98 23381 - Ground Support Equipment Servicer 32.63 23382 - Ground Support Equipment Worker 34.11 23391 - Gunsmith I 27.65 23392 - Gunsmith II 30.45 23393 - Gunsmith III 33.02 23410 - Heating, Ventilation And Air-Conditioning 29.45

Mechanic 23411 - Heating, Ventilation And Air Contidioning 30.63 Mechanic (Research Facility) 23430 - Heavy Equipment Mechanic 29.89 23440 - Heavy Equipment Operator 30.61 23460 - Instrument Mechanic 33.77 23465 - Laboratory/Shelter Mechanic 31.79 23470 - Laborer 19.30 23510 - Locksmith 32.33 23530 - Machinery Maintenance Mechanic 31.11 23550 - Machinist, Maintenance 27.78 23580 - Maintenance Trades Helper 18.52 23591 - Metrology Technician I 33.77 23592 - Metrology Technician II 35.09 23593 - Metrology Technician III 36.20 23640 - Millwright 33.86 23710 - Office Appliance Repairer 23.64 23760 - Painter, Maintenance 25.00 23790 - Pipefitter, Maintenance 33.01 23810 - Plumber, Maintenance 31.78 23820 - Pneudraulic Systems Mechanic 33.02 23850 - Rigger 28.78 23870 - Scale Mechanic 30.45 23890 - Sheet-Metal Worker, Maintenance 35.57 23910 - Small Engine Mechanic 22.41 23931 - Telecommunications Mechanic I 30.60 23932 - Telecommunications Mechanic II 31.82 23950 - Telephone Lineman 44.76 23960 - Welder, Combination, Maintenance 26.00 23965 - Well Driller 29.52 23970 - Woodcraft Worker 33.02 23980 - Woodworker 27.65 24000 - Personal Needs Occupations 24550 - Case Manager 20.75 24570 - Child Care Attendant 14.78*** 24580 - Child Care Center Clerk 18.44 24610 - Chore Aide 14.13*** 24620 - Family Readiness And Support Services 20.75 Coordinator 24630 - Homemaker 20.75 25000 - Plant And System Operations Occupations 25010 - Boiler Tender 35.75 25040 - Sewage Plant Operator 31.39 25070 - Stationary Engineer 35.75 25190 - Ventilation Equipment Tender 28.19 25210 - Water Treatment Plant Operator 31.39 27000 - Protective Service Occupations 27004 - Alarm Monitor 24.62 27007 - Baggage Inspector 16.85*** 27008 - Corrections Officer 26.79 27010 - Court Security Officer 33.16 27030 - Detection Dog Handler 19.62 27040 - Detention Officer 26.79 27070 - Firefighter 39.52 27101 - Guard I 16.85***

27102 - Guard II 19.62 27131 - Police Officer I 36.95 27132 - Police Officer II 41.05 28000 - Recreation Occupations 28041 - Carnival Equipment Operator 17.04*** 28042 - Carnival Equipment Repairer 18.10 28043 - Carnival Worker 13.66*** 28210 - Gate Attendant/Gate Tender 19.65 28310 - Lifeguard 14.06*** 28350 - Park Attendant (Aide) 21.98 28510 - Recreation Aide/Health Facility Attendant 16.05*** 28515 - Recreation Specialist 27.24 28630 - Sports Official 17.51 28690 - Swimming Pool Operator 19.94 29000 - Stevedoring/Longshoremen Occupational Services 29010 - Blocker And Bracer 31.37 29020 - Hatch Tender 31.37 29030 - Line Handler 31.37 29041 - Stevedore I 30.01 29042 - Stevedore II 32.75 30000 - Technical Occupations 30010 - Air Traffic Control Specialist, Center (HFO) (see 2) 49.75 30011 - Air Traffic Control Specialist, Station (HFO) (see 2) 34.30 30012 - Air Traffic Control Specialist, Terminal (HFO) (see 2) 37.78 30021 - Archeological Technician I 20.33 30022 - Archeological Technician II 22.75 30023 - Archeological Technician III 28.18 30030 - Cartographic Technician 28.27 30040 - Civil Engineering Technician 29.92 30051 - Cryogenic Technician I 30.68 30052 - Cryogenic Technician II 33.89 30061 - Drafter/CAD Operator I 20.33 30062 - Drafter/CAD Operator II 22.75 30063 - Drafter/CAD Operator III 25.36 30064 - Drafter/CAD Operator IV 31.21 30081 - Engineering Technician I 19.11 30082 - Engineering Technician II 21.46 30083 - Engineering Technician III 24.00 30084 - Engineering Technician IV 29.75 30085 - Engineering Technician V 36.38 30086 - Engineering Technician VI 44.01 30090 - Environmental Technician 28.88 30095 - Evidence Control Specialist 27.70 30210 - Laboratory Technician 29.85 30221 - Latent Fingerprint Technician I 27.28 30222 - Latent Fingerprint Technician II 30.14 30240 - Mathematical Technician 31.00 30361 - Paralegal/Legal Assistant I 21.69 30362 - Paralegal/Legal Assistant II 26.86 30363 - Paralegal/Legal Assistant III 32.86 30364 - Paralegal/Legal Assistant IV 39.75 30375 - Petroleum Supply Specialist 33.89 30390 - Photo-Optics Technician 28.18 30395 - Radiation Control Technician 33.89 30461 - Technical Writer I 27.52

30462 - Technical Writer II 33.68 30463 - Technical Writer III 40.74 30491 - Unexploded Ordnance (UXO) Technician I 31.62 30492 - Unexploded Ordnance (UXO) Technician II 38.26 30493 - Unexploded Ordnance (UXO) Technician III 45.85 30494 - Unexploded (UXO) Safety Escort 31.62 30495 - Unexploded (UXO) Sweep Personnel 31.62 30501 - Weather Forecaster I 30.68 30502 - Weather Forecaster II 37.32 30620 - Weather Observer, Combined Upper Air Or (see 2) 25.36 Surface Programs 30621 - Weather Observer, Senior (see 2) 28.18 31000 - Transportation/Mobile Equipment Operation Occupations 31010 - Airplane Pilot 38.26 31020 - Bus Aide 22.94 31030 - Bus Driver 29.56 31043 - Driver Courier 19.94 31260 - Parking and Lot Attendant 14.46*** 31290 - Shuttle Bus Driver 19.00 31310 - Taxi Driver 15.48*** 31361 - Truckdriver, Light 21.14 31362 - Truckdriver, Medium 22.28 31363 - Truckdriver, Heavy 27.88 31364 - Truckdriver, Tractor-Trailer 27.88 99000 - Miscellaneous Occupations 99020 - Cabin Safety Specialist 18.65 99030 - Cashier 14.27*** 99050 - Desk Clerk 15.79*** 99095 - Embalmer 34.20 99130 - Flight Follower 31.62 99251 - Laboratory Animal Caretaker I 17.53 99252 - Laboratory Animal Caretaker II 18.62 99260 - Marketing Analyst 36.28 99310 - Mortician 34.20 99410 - Pest Controller 21.24 99510 - Photofinishing Worker 18.64 99710 - Recycling Laborer 24.67 99711 - Recycling Specialist 28.42 99730 - Refuse Collector 22.78 99810 - Sales Clerk 15.30*** 99820 - School Crossing Guard 17.65 99830 - Survey Party Chief 30.58 99831 - Surveying Aide 18.14 99832 - Surveying Technician 26.81 99840 - Vending Machine Attendant 18.04 99841 - Vending Machine Repairer 21.10 99842 - Vending Machine Repairer Helper 18.04

***Workers in this classification may be entitled to a higher minimum wage under Executive Order 14026 ($17.20 per hour) or 13658 ($12.90 per hour). Please see the Note at the top of the wage determination for more information. Please also note that the minimum wage requirements of Executive Order 14026 and 13658 are not currently being enforced as to contracts or contract-like instruments entered into with the federal government in connection with seasonal recreational services or seasonal recreational equipment rental for the general public on federal lands. The minimum wage requirements of Executive Order 14026 also are not currently being enforced as to any contract or subcontract to which the states of Texas, Louisiana, or Mississippi, including their agencies, are a party.

Note: Executive Order (EO) 13706, Establishing Paid Sick Leave for Federal Contractors, applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2017. If this contract is covered by the EO, the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work, up to 56 hours of paid sick leave each year. Employees must be permitted to use paid sick leave for their own illness, injury or other health-related needs, including preventive care; to assist a family member (or person who is like family to the employee) who is ill, injured, or has other health-related needs, including preventive care; or for reasons resulting from, or to assist a family member (or person who is like family to the employee) who is the victim of, domestic violence, sexual assault, or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: $5.36 per hour, up to 40 hours per week, or $214.40 per week or $929.07 per month

HEALTH & WELFARE EO 13706: $4.93 per hour, up to 40 hours per week, or $197.20 per week, or $854.53 per month*

*This rate is to be used only when compensating employees for performance on an SCA-covered contract also covered by EO 13706, Establishing Paid Sick Leave for Federal Contractors. A contractor may not receive credit toward its SCA obligations for any paid sick leave provided pursuant to EO 13706.

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor, 3 weeks after 8 years, and 4 weeks after 15 years. Length of service includes the whole span of continuous service with the present contractor or successor, wherever employed, and with the predecessor contractors in the performance of similar work at the same Federal facility. (See 29 CFR 4.173)

HOLIDAYS: A minimum of eleven paid holidays per year: New Year's Day, Martin Luther King Jr.'s Birthday, Washington's Birthday, Memorial Day, Juneteenth National Independence Day, Independence Day, Labor Day, Columbus Day, Veterans' Day, Thanksgiving Day, and Christmas Day. (A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.) (See 29 CFR 4.174)

THE OCCUPATIONS WHICH HAVE NUMBERED…