RFQ580410423000528_Nov_4_24_solicitation_doc.pdf
PDF 18 KB Posted
- Attached to
- Plastic Manufacturing Equipment
- Solicitation number
- RFQ580410423000528
- Issued by
- Clay County, Jefferson City, Missouri
About this file
This document is a Request for Quote (RFQ) issued by the Missouri Department of Health and Senior Services (DHSS) for plastic manufacturing equipment. The DHSS is seeking quotes for a large format IDEX 3D printer and an extended warranty to produce laboratory consumables such as pipette tips, conical tubes, and specialty parts using recycled plastic. The solicitation is open to all vendors, with a bid due date of September 30, 2022 at 3:00 PM CDT. Delivery terms are FOB destination, and payment terms are outlined in the bid document.
The RFQ specifies detailed technical requirements for the 3D printer, including electrical, printing technology, build volume, temperature ranges, filament diameter, and footprint dimensions. The RFQ also requires an extended warranty covering 24-36 months of parts, labor, full machine service, and support. This opportunity is located in Jefferson City, Missouri, and is intended to serve the Clay County and Jefferson City jurisdictions.
View the file
Other files
Show all 36
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Solicitation Number: RFQ580410423000528
Plastic Manufacturing Equipment
Request for Quote (RFQ)
DHSS - Dept of Health/Senior Serv
August 31, 2022 - September 30, 2022
Page:2
General Header Information
RFQ580410423000528
No. RFQ580410423000528 Title: Plastic Manufacturing Equipment Start Date: August 31, 2022 at 11:30:00 AM CDT End Date: September 30, 2022 at 3:00:00 PM CDT Vendor Q&A Start Date:
Vendor Q&A End Date:
Estimated Total Value:
Who can respond to this bid? : All Vendors Description: Requesting a quote for plastic manufacturing equipment to use with recycled laboratory grade plastic to be used to produce consumables including pipette tips, conical tubes and hard to find specialty parts.
Delivery Terms: Free On Board Destination Delivery Notes: See bid document for delivery terms.
Payment Terms: See Payment Notes Payment Notes: See bid document for payment terms.
Contact Information: DHSS - Dept of Health/Senior Serv
Cindy Blair 920 Wildwood Drive, Jefferson City MO, 65109 United States Tel: 573-522-0359 Fax: 573-526-0430 cindy.blair@health.mo.gov
Contact Details: If you have any questions, please contact:
Cindy Blair 920 Wildwood Drive, Jefferson City MO, 65109 United States Tel: 573-522-0359 Fax: 573-526-0430 cindy.blair@health.mo.gov
Selected Categories:
Page:3
Header Custom Fields:
RFQ580410423000528
NOTICE
Vendor Responsibility
The vendor is solely responsible for ensuring timely submission of their solicitation response. Failure to allow adequate time prior to the solicitation end date to complete and submit a response to a solicitation, particularly in the event technical support assistance is required, places the vendor and their response at risk of not being accepted on time.
The State of Missouri's Privacy Policy can be accessed here.
http://www.mo.gov/privacy-policy/
Page:4
Solicitation Requirements:
This quote has no questions defined.
RFQ580410423000528
REQUIREMENTS
Requirements:
To access the official solicitation document, which includes all applicable requirements, detailed specifications, and terms and conditions, the vendor must click on the Overview tab to view the solicitation. Under the Overview tab, the vendor must either: 1) print the solicitation document in order to submit a hard copy, if allowed by the solicitation, or 2) review and accept the solicitation documents under the Overview tab, and submit an electronic response to the solicitation through the MissouriBUYS system.
Page:5
Documents:
RFQ Plastic Manufacturing Equipment.docx
Page:6
Item Specifications
No. Item Alternative Supplier Part No Mfr.
Name
Mfr. No Del
Date
Unit Unit Bid Qty. Total
1 Large Format IDEX 3D
Printer each 1.00
Item Specification for Large Format IDEX 3D Printer
Description: Large Format IDEX 3D Printer Electrical requirements: 110-24V (must be single-phase AC); Printing Technology: Independent Dual Extrusion (IDEX) (FFF); Build Volume: [330 x 240 x
300mm] (must be fully enclosed); Maximum Enclosure Temperature: 60° C; Maximum Nozzle Temp: 350° C; Maximum Build Plate Temperature: 120° C; Filament Diameter: 2.85mm; Footprint:
[36” x 32” x 24”]; Must have replaceable / exchangeable nozzles. Should have an associated humidity controlled cabinet for storage of filament + supplies; May have casters to allow for ease of movement around facility; and Equivalent to: BCN 3D Epsilon W50 printer
Allow Vendor to Enter Negative Value : No
Exclude Line Item from Bid Total : No
2 Manufacturer Warranty each 1.00
Item Specification for Manufacturer Warranty
Description: Extended Warranty Twenty-four (24) to thirty-six (36) months coverage on all Manufacturer warranty parts; Labor for the fitting of the replacement parts (Excluding consumables);
Full certificated machine service; Extended telephone and email support (beyond thirty-six (36) months); Collection and return delivery; and may be through original manufacturer, third party providers are acceptable.
Allow Vendor to Enter Negative Value : No
Exclude Line Item from Bid Total : No
Page:7
File details come from the government source that posted it. Updated .