5180-01-483-1431 FBO Posting.docx

REQUEST FOR QUOTATION

5180-01-483-1431

July 26, 2011

United States of America GSA Heartland Supply Operations Center 1500 E. Bannister Road Kansas City, Missouri 64131

Phone: (816) 926-3582 Email: katie.norton@gsa.gov

FOR INFORMATION, PLEASE CONTACT: Katie Norton

Please submit your response by close of business August 1, 2011 via the above email.

Important: This is a request for quotations, and quotations furnished are not offers. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation, or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. If you are unable to quote, please so indicate on this form and return.

Please review the attached item purchase description(s).

Delivery shall be FOB Origin, shipped prepaid by common carrier, parcel carrier or parcel post.

Destinations: Within Continental U.S.A.

Shipment time ____________________ ARO (After Receipt of Order)

Price is valid through ____________________________

Vendor’s Minimum Order Amount, if any: _________________

Business size: Large _______ or Small ________

Vendor’s DUNS Number: ____________________________________

Name & address of vendor and signature of quoter:

Name:_____________________________________________________ Address:___________________________________________________

City:_________________________________ State:________________

Telephone: ____________________ FAX: _______________________

Email:___________________________________________

Print name:______________________________________

Signature:____________________________________ Date:_________

Manufacturer’s Name:________________________________________________

Manufacturer’s Address:______________________________________________

PLEASE NOTE: Effective October 1, 2003 all vendors seeking to do business with the Federal Government are required to register with the Central Contract Registration at www.ccr.gov. If you are not registered and are not willing to register we will not be able make an award to your firm.

Please provide Material Safety Data Sheet(s) (MSDS) along with your quote.

Return pages 1-11 only.

Please provide pricing for the following NSN(s). See description(s) below. If you offer price breaks based on quantity, please list on a separate sheet.

NSN

Unit price

5180-01-483-1431

5180-01-483-1431 Ver.: 12 UI: KT

TOOL KIT, MEDICAL EQUIPMENT MAINT. AND REPAIR, REPAIRMANS:

DESCRIPTION

In addition to the list of components:

Case: Hardigg 3627-1505 Standard Configurable Case Case color: olive drab-green Features: standard zinc hardware, compartmented insert to secure component tools Hardigg Industries, Inc. part number AL3627-1505-16045-200-000043.

Socket Wrench Set:

The set shall be 3/8" drive and contain one each of the following components.

1. 8 point; Wrenching size: 1/4, 5/16 and 3/8 inch

2. 12 point, regular length; Wrenching size: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, and 7/8 inch

3. 12 point, long length, Wrenching size: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, and 7/8 inch

4. 12 point, Wrenching size: 7/16, 1/2, 9/16, 5/8 and 3/4 inch

5. reversible ratchet

6. extensions, Sizes: 3, 6, and 12 inch

7. hinged handle, Length: 7-7/8 inch

8. universal joint

9. speed handle

10. Case W.W. Grainger Part Number 5C859.

Drift Punch Set In accordance with ASME B107.48 Type II: Punches Class 4 Drift or Lining-up: punch used for aligning and sizing holes in metal and otehr materials Component Quantity: 5 pieces Component Supplied Punch Set:

Item Name Point Size Hex Size Length Long Tapered Drift 3/32" 1/4" 8" Drift Punch 1/8" 5/16" 8" Drift Punch 3/16" 3/8" 12" Drift Punch 1/4" 1/2" 14" Long Tapered Drift 5/16" 5/8" 16" Case Included: Furnished in vinyl kit bag Matco Tools pat number SPDL5K.

See Technical Specifications paragraph(s): T3.1, T4.1, T5.1 and T6.1

List of Components of 5180-01-483-1431:

1. 4240-01-477-5380 Qty: 1 UI: EA

GOGGLES, INDUSTRIAL:

DESCRIPTION

Protective goggle, frame type perforated, regular clear lens, anti-fog, lens coating impact with rubber strap.

W. W. Grainger Part Number: 1VT68 or equal.

Offering on:

Manufacturer's Name: __________________________

Brand___________________________________

Model or Part No. __________________________________

2. 5110-00-247-2565 Qty: 1 UI: EA

FILE SET, HAND:

DESCRIPTION

Type: File Set, Hand Container Type: Roll Pattern Type: Swiss File Quantity: 12 File Characteristics: Contains 1 ea barrette, equaling, flat, marking, joint, knife, half round, round, slitting, square, three square and crossing needle files; 5-1/2 in. Long; no. 2 cut.

3. 5110-01-428-5422 Qty: 1 UI: EA

SAW, HAND, METAL-CUTTING:

DESCRIPTION

Type: Saw,Hand,Metal Cutting Blade Lengths: 10" minimum and 12" maximum Throat Depth: 3-7/8" or 98mm Features Provided: Adjustable Frame and Tubular Frame Special Features: Cast Handle; 4 Cutting Positions; Holding compartment for extra blades Material: Steel Frame Furnished Item: 10" (255 mm) standard carbon steel blade Style Designator: Closed Grip Handle Hacksaw

4. 5120-01-482-7617 Qty: 1 UI: SE

WRENCH SET, COMBINATION

DESCRIPTION

Combination Wrench Set, Box and Open End Set includes 15 wrenches in the following sizes:

5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1-1/16, 1-1/8, 1-1/4 inch box and open ends; Wrenching Surface Shape: 12 point configuration Material: Steel Surface Treatment: Chromium, Satin Finish Features Included: Vinyl roll

Stanley Proto Industrial Tools part number 1200FASD or W W Grainger Inc Part Number 6A541 or equal

5. 5120-00-293-3485 Qty: 1 UI: EA

PLIERS

DESCRIPTION

Type: VII (Fence) Single Head.

Nominal size: 10 inches Cushion grip handles.

6. 5120-01-067-5016 Qty: 1 UI: SE

WRENCH SET, BOX & OPEN END, COMBINATION:

DESCRIPTION

The set shall consist of fifteen (15) wrenches and a container.

Combination wrench, open end, and 15 degree offset box opening Type: I (Regular length).

Wrenching Surface Shape: Open end (Oval), Box end (12-point, double hexagon).

Finish: Chromium.

Wrenching Sizes: 7, 8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 29, 30, and 32mm.

Feature: Each wrench shall be equal to or longer in length than the next smaller wrenching size wrench within the set.

Container: Wrenches shall be furnished in a roll or wrap with individual pockets for each wrench.

See Technical Specifications paragraph(s): T1.2, T2.4 and T2.6

7. 5120-01-335-2269 Qty: 1 UI: SE

EXTRACTOR SET, SCREW:

DESCRIPTION

Extractor Set, Screw Furnished Items: Plastic Pouch Component Quantity: 6 Supply Items and Quantities: Contains spiral flute extractors size 1 thru 6; square shanks.

8. 5120-01-336-5476 Qty: 1 UI: EA

WRENCH, , PIPE:

DESCRIPTION

Style designator: Straight jaw;

Wrenching surface size: 2-1/2 inches;

Overall length: 18 inches;

Material: Aluminum handle;

Wrenching surface shape: Oval single end internal.

KIT COMPONENT 5180-01-483-1431

9. 5120-01-336-7771 Qty: 1 UI: EA

WRENCH, PLIER:

DESCRIPTION

Type I: Locking Pliers Class 2: Curved Jaws Style B: With Cutter Overall length: 10 inches;

Wrenching Surface Size: 1.875 inches maximum Special features: Locking pliers Material: Steel Style designator: Curved jaw

See Technical Specifications paragraph(s): T1.4

10. 5120-01-428-5093 Qty: 1 UI: EA

HAMMER, HAND:

DESCRIPTION

Style designator: Carpenter's nailing, curved-claw;

Head weight: 16 ounces;

Overall length: 13-1/4 inches;

Head material: Steel;

Handle material: Graphite, flared handle end.

See Technical Specifications paragraph(s): T1.5

11. 5120-01-430-4499 Qty: 1 UI: SE

WRENCH SET, SOCKET:

DESCRIPTION

Drive Surface Size: 3/8 inch Wrenching Surface Shape: 12-point single end internal Drive Surface Shape: Square single end internal Surface Treatment: Chromium Component Quantity: 20 Furnished Items: Metal box Nonsupply Items and Quantities:

ASME B107.1 - Type I - Sockets, double (12-point) hexagon, Class 1: Regular length, wrenching sizes (14 pcs.) 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18 and 19mm ASME B107.10M - Type 1 - Handles:

Class 1 - Hinged Class 2 - Ratchet, Reversible - (regular length) Class 3 - Speeder, Style 1 - Brace type, single Type: 2 - Attachments:

Class 1 - Universal joint, Class 2 - Bar, Extension, Style 1 - Solid, lengths: 3 and 12 inches

KIT COMPONENT: 5180-01-483-1431

See Technical Specifications paragraph(s): T1.1, T1.3, T2.2, T2.3 and T2.5

12. 5120-01-430-5070 Qty: 1 UI: EA

RIVETER, BLIND, HAND:

DESCRIPTION

Type: Riveter, Blind, Hand Rivet sizes for which designated: 3/32, 1/8, 5/32 and 3/16 inch diameter rivets Accessory components and quantity: 4 nosepieces and 200 assorted rivets Handles: Vinyl grip furnished in a plastic case

MATCO Tools NMTC Inc. Part Number: 200F/39001 or equal

13. 5120-01-430-6552 Qty: 1 UI: EA

WRENCH, ADJUSTABLE:

DESCRIPTION

Type 2: Wide openings Style: Open end single head rack and worm adjustment;

Wrenching Surface Size: 1-5/16 Wrenching Surface Shape: Oval Surface Treatment: Chromium

See Technical Specifications paragraph(s): T1.6

14. 5120-00-851-4247 Qty: 1 UI: SE

SCREWDRIVER BIT SET AND HANDLE:

DESCRIPTION

Type: Screwdriver Bit Set and Handle Handle Type: Straight Component Quantity: 11 Container Type: Case (Plastic, Metal or Roll) Bit Size and Quantity: Hex Blades size 0.050, 1/16, 5/64, 3/32, 7/64,1/8, 9/64, 5/32 and 3/16 inches Features Provided: Includes Blade Extension Non-Ratcheting

See Technical Specifications paragraph(s): TE.6

15. 5120-01-477-4762 Qty: 1 UI: EA

VISE, MACHINIST'S

DESCRIPTION

Jaw opening - 2-5/8 inches, jaw width - 3 inches. V-groove jaws with slide-on rubber jaws for fragile work; vice grips firmly to glass, metal, Formica, fiberglass, or any smooth, non-porous surface with quick lever action; universal ball joint swivels 360 degrees to any position and tilts 90 degrees to any angle; material - steel.

Grainger Part Number - 3ZH06 or General Hardware Mfg. Co. Part Number - 1850.

16. 5120-01-478-6295 Qty: 1 UI: SE

PUNCH SET, CENTER, SOLID:

DESCRIPTION

Contains 5 Round Punches; overall length: 3 inches to 4 inches. Diameter point sizes: 1/16, 5/64, 3/32, 1/8, and 5/32 inch.

17. 5130-01-448-6702 Qty: 1 UI: EA

SANDER, DISC, ELECTRIC, PORTABLE:

DESCRIPTION

Pad diameter: 5 inches;

Drive method: Electric motor;

Current type: AC;

Voltage: 120 volts;

Hertz frequency: 60.0 Phase: Single;

Special features: Palm grip; random orbital; 3 AMP; 12,000 OPM; pressure sensitive adhesive pad; dust sealed switch; double insulated, and dust bag with vacuum adapter.

Black & Decker Inc. (Dewalt) P/N D26450 or equal.

18. 5130-01-459-6060 Qty: 1 UI: EA

DRILL-DRIVER, ELECTRIC, PORTABLE:

DESCRIPTION

Drill-Driver, Electric, Portable Current type: Direct Current (DC);

Voltage rating: 18 volts;

Drive design: Straight;

Drive end type: Keyless jaw chuck;

Speed adjustment: Variable speed;

Handle style: Pistol grip;

Size designator: 1/2 inch;

No load speed in RPM: 1500 RPM Maximum torque: 400 inch-pounds maximum torque Accessory components and quantity: (2) 18 volt batteries; (1) battery charger; (1) screwdriver bit, double ended, No. 2 Phillips and slotted tip; (1) 360 degree side handle; (1) plastic case; keyless ratcheting chuck.

Special features: Cordless, reversible, three (2) speed ranges 0 to 450/ 0 to 1500 RPM.

19. 5133-01-478-7706 Qty: 1 UI: SE

DRILL SET, TWIST:

DESCRIPTION

Set includes 29 pieces Sizes 1/16 to 1/2 inches in 1/64 inch increments Jobbers length Point angle: 118 degrees Surface treatment: black phosphate, industrial finish.

See Technical Specifications paragraph(s): T1.7 and T2.1

20. 5210-00-178-4227 Qty: 1 UI: EA

TAPE, MEASURING

DESCRIPTION

Type: General purpose distance measuring.

Standard Graduation Units: Inches and feet.

Measuring Capacity: 100 feet.

Tape Width: 3/8".

Tape Smallest Graduation: 1/8".

Reading Direction: Left to right.

End Type: Nonbutt.

Material: Steel.

Winding Method: Hand crank.

Special Features: High visibility yellow blade. Orange case.

Cooper Tools Lufkin Division part number 100L or equal.

21. 5210-01-477-3834 Qty: 1 UI: EA

CALIPER, VERNIER:

DESCRIPTION

Type: Caliper, Vernier Measurement System: English and Metric;

Outside Measurement Range: 0.000 to 8.000 inches and 0.0 to 200.0mm;

Inside Measurement Range: 0.000 to 8.000 inches and 0.0 to 200.0mm;

Jaw Depth: 1.900 inches;

Vernier Scale Usage Location: Inside and Outside;

Minimum Vernier Graduation Unit: 0.001 inches and 0.020mm;

Vernier Scale Location: Front;

Carrying Case: Provided;

Surface Condition: Dull satin-chrome;

Material: Steel, stainless.

Fred V. Fowler Co. Inc. part number 52-058-008.

22. 7910-01-477-3836 Qty: 1 UI: EA

CLEANER, VACUUM, ELECTRIC:

DESCRIPTION

CLEANER, VACUUM, ELECTRIC: Shall be a lightweight portable, dry pick-up only, hand vac designed for general pick up of dirt, dust, and litter; Suitable for use in hard-to-reach spaces; Includes adjustable shoulder strap, removable soft-snout with wide mouth for direct cleaning, 1-1/4 inch diameter x 3 ft. hose, utility nozzle, crevice tool, and filter bag; Features an 18 ft. 3-conductor power cord; Approximate dimensions 8 high x 9-3/4 wide x 16-1/2 long.

Unit of issue is 1 each (EA)

PRODUCT CONFORMANCE. The products provided shall meet the salient characteristics of this description, conform to the producer's own drawings, standards, and quality assurance practices and be the same product offered for sale in the commercial market. The Government reserves the right to require proof of such conformance.

POSSIBLE SOURCE:

Grainger Industrial Supply, Part Number 4Z906.

23. 7920-01-479-0198 Qty: 1 UI: EA

BRUSH, WIRE, SCRATCH:

DESCRIPTION

BRUSH, WIRE, SCRATCH: BRUSH, WIRE, SCRATCH: Shall be in accordance with the following characteristics:

Brush material. Stainless steel wire

Handle. 10 inch shoe wood

Trim Length. 1-3/16 inch

Number of Rows. 4x16

Workmanship. The brushes shall function smoothly for the purpose intended. Handles shall be free of cracks or chips. No defects that affect appearance, function or serviceability shall be permitted.

Unit of issue - EA (One (1) each).

PRODUCT CONFORMANCE: The products provided shall meet the salient characteristics of this description, conform to the producer's own specifications, standards, and quality assurance practices and be the same product offered for sale in the commercial market. The Government reserves the right to require proof of such conformance.

POSSIBLE SOURCES:

P/N: 3A335 W.W. GRAINGER, Inc.

5831 Buckeystown Pike Frederick, MD 21704-7257

P/N: 44064

WEILER CORP.

1 WILDWOOD DR.

CRESCO, PA 18326

570.595.7495

End of 5180-01-483-1431 Components List

TECHNICAL SPECIFICATIONS

TECHNICAL DOCUMENT

T1.1

In accordance with American Society of Mechanical Engineers (ASME) B107.1-2002.

Applies to item(s): 11

T1.2

In accordance with ASME B107.100-2002, Wrenches.

Incorporating ASME B107.6, ASME B107.9, ASME B107.39 and ASME B107.40

Applies to item(s): 6

T1.3

In accordance with American Society of Mechanical Engineers(ASME) B107.10 - 2005

Applies to item(s): 11

T1.4

In accordance with American Society of Mechanical Engineers (ASME) B107.24 as contained in ASME B107.500-2010; this document incorporates and includes the revisions of primary standard B107.11, B107.13, B107.16, B107.18, B107.19, B107.20, B107.22, B107.23, B107.24, B107.25, B107.27 and B107.37.

Applies to item(s): 9

T1.5

In accordance with American Society of Mechanical Engineers (ASME) B107.41 as contained in ASME B107.400-2008; this document incorporates and includes the revisions of primary standard B107.41, B107.42, B107.53, B107.54, B107.56, and B107.58

Applies to item(s): 10

T1.6

In accordance with American Society of Mechanical Engineers (ASME) B107.8 as contained in ASME B107.100-2010; this document incorporates and includes the revisions of primary standard B107.6, B107.8, B107.9, B107.21, B107.39, B107.40, and B107.66.

Applies to item(s): 13

T1.7

In accordance with American Society of Mechanical Engineers (ASME) B94.11M-1993.

Applies to item(s): 19

EXCEPTION(S) TO TECHNICAL DOCUMENT

T2.1

Add the following requirements to ASME B94.11M:

The twist drill flute and shank hardness shall be as follows:

Flute Hardness.

Drills 5/64 inch and smaller shall have a flute hardness from the drill point to 75 percent or more of the flute length shall be Knoop microhardness 799-870. Drills larger than 5/64 inch shall have a flute hardness from the drill point to 75 percent or more of the flute length shall be 63-66 HRc.

Shank hardness.

Straight shank and Morse shank Drills: Drills 1/2 inch and smaller shall have a shank hardness between the mid-point of the shank and the end of the shank shall be 18-45 HRc. Drills over 1/2 inch shall have a shank hardness between the mid-point of the shank and the end shall be 80 HRb greater.

Straight shank drills 6 inch or longer overall length: Shank hardness from the end of the flute run out to within 1 inch of the shank end shall be spring tempered to 30 HRc or greater.

Hardness testing.

When testing is required, hardness testing will be performed in accordance with the current version of ASTM E18 or ASTM E384, as applicable.

Applies to item(s) : 19

T2.2

The case for the tool and accessories shall be a sturdy and durable case which shall be capable of protecting the tool and accessories throughout the life of the item. Each tool compartment shall provide a safe, compact, and secure method of storing the tool, shall provide for convenient tool selection, and shall prevent damage to the tool during handling, shipment, and storage. With the case secured in a closed position, tools shall not be displaced from their individual compartments by any orientation of the case. The case shall have at least one shutter hook, snap-type latch, or similar hardware to secure the case in a closed position. Cases shall be fitted with at least two hinges or a continuous hinge. Plastic cases shall be constructed of a double layer, impact resistant polymer. Metal cases shall be corrosion resistant or have a corrosion resistant coating (e.g., plating, paint) on interior and exterior surfaces. Metal hardware (e.g., hinges, hinge pins, latches, screws) on cases shall be corrosion resistant or have a corrosion resistant plating; paint shall not be the primary corrosion resistant coating on metal hardware. A suitable handle with a minimum 3/8" diameter shall be secured to the case by welding rivets.

Applies to item(s) : 11

T2.3

Coatings: Shall be in accordance with SAE AS4984-2011; Coating Requirements for Aerospace Hand Tools.

Applies to item(s) : 11

T2.4

Alternative coatings may be used and shall be in accordance with Coating Requirements for Aerospace Hand Tools, SAE AS4984 Issued 1999-05.

Applies to item(s) : 6

T2.5

FINISH: Each wrench shall be fully polished over the entire external surfaces with a maximum roughness height value of 32 microinches. Tips of the wrench opening shall be chamfered or rounded to eliminate burrs.

Applies to item(s) : 11

T2.6

The wrenching surface shall be 12 point (Double Hexagon).

The internal wrench design of all sockets, boxed box wrenches, torque adaptors, shall be so configured that when mated with 12-point fasteners conforming to the requirements of AS870, they transmit torque to the fastener without bearing on the outer 5% of the fastener's wrenching points.

Applies to item(s) : 6

ITEM MARKING

T3.1

Each item Shall Be Marked in a Permanent and Legible Manner with:

1) Manufacturer's Part Number

2) Manufacturer's Name or Identifying Symbol, and

3) Country of Origin

Each Package including the unit, single, intermediate, and exterior container must be labeled with the requisition number or Transportation Control Number (TCN). Requisition Number and TCN are found on the Purchase Order.

Applies to item(s) : main kit/set

PACKAGING

T4.1

Shall be in accordance with the latest Edition of ASTM D 3951-98, "Practice for Commercial Packaging" available at www.ASTM.org.

Applies to item(s) : main kit/set

PACKING

T5.1

The unit packages shall be packed in a close fitting fiberboard box in compliance with the Uniform Freight Classification and the National Motor Freight Classification requirements of Rules, Item 222, Sec. 3., Minimum 200 psi, or Edge Crush Test (ECT) 32 Lbs. per Inch Width.

Applies to item(s) : main kit/set

MARKING

T6.1

All unit, intermediate, transport packages and unit loads shall be marked and bar coded for delivery to civilian activities in accordance with the latest version of FED-STD-123, "Marking For Shipment (Civil Agencies)", or marked and bar coded for delivery to military activities in accordance with the latest version of MIL-STD-129, "Military Marking For Shipment and Storage". "Latest version" is defined as the version in effect on the date of bid submittal. Federal Standards and Military Standards can be accessed on-line via the Defense Logistics Agency's "Assist" Quicksearch web site:

http://assist.daps.dla.mil/quicksearch/.

PALLETIZATION

Pallet Configuration: The pallets shall be 48-inch length x 40-inch width, general purpose, four-way entry, flush stringer, double-face non-reversible pallets. Pallet lumber used shall be bark free.

Pallet Load Size: The load plus the pallet shall have a maximum height of 53 inches and shall not exceed 2500 pounds in weight for shipments to Eastern Distribution Center (Burlington). The palletized load shall not exceed 2000 pounds in weight for shipments to the Western Distribution Center (Sharpe).

Pallet Load Configuration: The containers or items shall be placed in a suitable pattern to form a stable and balanced load. Palletized loads shall be secured to the pallet to insure that the load arrives intact.

Stacking Strength: The pallet plus the load shall be capable of supporting three additional like loads without any product damage and without the load or the pallet collapsing. Vertical, horizontal, or filler reinforcement may be added as necessary to provide strength.

Partial Palletized Loads: Less than one-half pallet loads shall not be used for stacking, unless load is balanced on pallet. The partial palletized load shall be used for top loading only.

Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published Guidelines for Regulating Wood Packaging Material in International Trade . Countries endorsing the IPPC Guidelines are found at the website given below. General Services Administration Acquisition Manual (GSAM) Clause 552.211-89 requires non-manufactured wood pallets and other non-manufactured wood packaging material used to pack items for delivery to or through IPPC countries be marked and properly treated in accordance with IPPC guidelines. Pallets and packing material shipped to FAS distribution facilities designated for possible delivery to the countries endorsing the IPPC Guidelines will comply with DLAD 47.305-1, and MIL-STD-2073-1.

http://www.aphis.usda.gov/import_export/plants/plant_exports/wpm/country/index.shtml.

Applies to item(s) : main kit/set

ENVIRONMENTAL FIELDS

TE.6. PRIME

Packaging for this product is compliant with the U.S. Navy "Plastics Removal in the Marine Environment (PRIME)" program which calls for non-plastic packaging, packing, and associated marking requirements. The definition of plastic shall be in accordance with that given in ASTM D883-00, "Standard Terminology Related to Plastics".

Applies to item(s): 14 image1.png oleObject1.bin