Comm Tower Post Questions.xlsx

XLSX spreadsheet 17 KB Posted

Attached to
Communications Tower
Solicitation number
RFQ5146
Issued by

View the file

Other files

File Type Posted
Comm Tower- RFQ njb2 RAM Edits 07_17_2020.docx DOCX document

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Sheet1

LineQuestionsAnswers
1Regarding tower loading calculations and design, please advise all intended antenna and cable specifications including the respective elevations on the tower.Qty 1 Radowaves Model HPD3-4.7 microwave dish facing 175.8 degrees from True North mounted so top of dish is just below the tower top. This is a dual polarity antenna having two Type "N" Female connectors. Two runs of Commscope AVA5-50 cable terminated at both ends with compatible Type "N" Male connectors. If possible, this dish install will also include one Radiowaves Model SST-2/3 Side Strut. Qty 1 Comprod Model 884-70 Exposed Dipole Array at 75ft elevation. Antennas RF connector is an Type "N" Male. Qty 1 run of Commscope AVA5-50 cable with Type "N" Female connector at the top end. Qty 1 Comprod Model 201-70 Vertical at 75 Ft elevation. Antennas RF connector is an Type "N" Male. Qty 1 run of Commscope AVA5-50 cable with Type "N" Female connector at the top end.
2Regarding site location, please confirm accessible by truck and crane or otherwise.Yes, truck and crane via asphault approach road.
3Regarding cable run, please clarify estimated distance to port of entry to comm shelter and whether cable run is expected to be run on above ground cable bridge or in underground conduit.APPROX 37 FEET. Cable is expected to be run on above ground cable bridge
4Please advise latitude/longitude.The base of the existing Rohn Tower which will be taken down is at Latitude 38:37:30.12N, Longitude -77:27:13.8W.
5Please confirm if the tower antenna design load will be installed at the time of tower erection.It is our intention that the stated antennas/feedlines be installed at the time of construction.

File details come from the government source that posted it. Updated .