RFQ19J01021Q0016.pdf

19J01021Q0016

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, & 30

1. REQUISITION NUMBER

PR9646092

2. CONTRACT NO.

3. AWARD/EFFECTIVE

DATE

4. ORDER NUMBER

5. SOLICITATION NUMBER

19-J010-21-Q-0016

6. SOLICITATION ISSUE DATE

April 29, 2021

7. FOR SOLICITATION

INFORMATION CALL

a. NAME

Yaser Belaidi

AmmanRFQQuestions@state.gov

b. TELEPHONE NUMBER(No collect calls)

(962) 6 590-6073

8. OFFER DUE DATE/

LOCAL TIME

16:00, 6/17/2021

9. ISSUED BY CODE

10. THIS ACQUISITION IS 11. DELIVERY FOR FOB 12. DISCOUNT TERMS

General Services Office

American Embassy

UNRESTRICTED

SET ASIDE: % FOR

SMALL BUSINESS

DESTINATION UNLESS

BLOCK IS MARKED

SEE SCHEDULE

P. O. Box 354

HUBZONE SMALL

BUSINESS

13a. THIS CONTRACT IS A RATED ORDER

UNDER DPAS (15 CFR 700)

Amman - Jordan 8(A) 13b. RATING

Tel: (962) 6 590-6025

Fax: (962) 6 590-7957

NAICS: 517210 Wireless Telecommunication Carriers (Except Satellites.

SIZE STD:

14. METHOD OF SOLICITATION

RFQ IFB RFP

15. DELIVER TO CODE

16. ADMINISTERED BY CODE

Amman - Jordan

17a. CONTRACTOR/ CODE

OFFEROR

FACILITY

CODE 18a. PAYMENT WILL BE MADE BY CODE

TELEPHONE NO.

Financial Management Office (FMO) American Embassy - Amman – Jordan P. O. Box 354 E-mail: AmmanBilling@state.gov Payment will be made within 30 days after receiving the services with a proper invoice. Invoices to be sent to FMO via Email.

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

SUCH ADDRESS IN OFFER

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS

BLOCK BELOW IS CHECKED SEE ADDENDUM

19.

ITEM NO.

20.

SCHEDULE OF SUPPLIES/SERVICES

21.

QUANTITY

22.

UNIT

23.

UNIT PRICE JD

24.

AMOUNT JD

Install audio visual system at the Coliseum room, in accordance with the statement of work and terms and conditions set forth herein.

JAMES ZADROGA 9/11 VICTIMS HEALTH AND COMPENSATION

ACT OF 2010 NOTICE: UNLESS A WAIVER OR EXCEPTION

APPLIES, PAYMENTS SUBSEQUENT TO THIS PROCUREMENT ARE

SUBJECT TO AN EXCISE TAX OF 2% PERSUANT TO 26 U.S.C.

5000C.

Lump sum

25. ACCOUNTING AND APPROPRIATION DATA

26. TOTAL AWARD AMOUNT (For Govt. Use Only)

27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1, 52.212-4. FAR 52.212-3 AND 52.212-5 ARE ATTACHED. ADDENDA ARE ARE NOT ATTACHED.

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED.

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN __1__

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND DELIVER

ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED

HEREIN.

29.AWARD OF CONTRACT: REF. _________________ OFFER

DATED _______________. YOUR OFFER ON SOLICITATION

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH

ARE SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

30b. NAME AND TITLE OF SIGNER (TYPE OR PRINT)

30c. DATE SIGNED

31b. NAME OF CONTRACTING OFFICER (Type or Print)

Cynthia Jachim 31c. DATE SIGNED mailto:AmmanRFQQuestions@state.gov mailto:AmmanBilling@state.gov

TABLE OF CONTENTS

Section 1 - The Schedule

• SF 18 or SF 1449 cover sheet

• Continuation To SF-1449, RFQ Number 19J01021Q0016, Prices, Block 23

• Continuation To SF-1449, RFQ Number 19J01021Q0016, Schedule Of

Supplies/Services, Block 20 Description/Specifications/Work Statement

• Attachment A to Description/Specifications/Performance Work Statement, Government Furnished Property

Section 2 - Contract Clauses

• Contract Clauses

• Addendum to Contract Clauses - FAR and DOSAR Clauses not Prescribed in Part 12

Section 3 - Solicitation Provisions

• Solicitation Provisions

• Addendum to Solicitation Provisions - FAR and DOSAR Provisions not Prescribed in

Part 12

Section 4 - Evaluation Factors

• Evaluation Factors

• Addendum to Evaluation Factors - FAR and DOSAR Provisions not Prescribed in

Part 12

Section 5 - Representations and Certifications

• Offeror Representations and Certifications

• Addendum to Offeror Representations and Certifications - FAR and DOSAR

Provisions not Prescribed in Part 12

SECTION 1 - THE SCHEDULE

CONTINUATION TO SF-1449

RFQ NUMBER 19J01021Q0016

PRICES, BLOCK 23

I. PERFORMANCE WORK STATEMENT

A. The purpose of this firm fixed price purchase order is to provide an integrated audiovisual system including but not limited to system design, engineering, installation, programing, and commissioning within room space in accordance with Attachment A.

B. The contract will be for a one-year period from the date of the contract award.

QUALITY ASSURANCE AND SURVEILLANCE PLAN (QASP)

This plan provides an effective method to promote satisfactory contractor performance. The

QASP provides a method for the Contracting Officer's Representative (COR) to monitor

Contractor performance, advise the Contractor of unsatisfactory performance, and notify the

Contracting Officer of continued unsatisfactory performance. The Contractor, not the

Government, is responsible for management and quality control to meet the terms of the contract.

The role of the Government is to monitor quality to ensure that contract standards are achieved.

Performance Objective Scope of Work

Paragraphs Performance Threshold

Services.

Performs all audiovisual system installation services set forth in the scope of work.

I thru XI

All required services are performed and no more than one customer complaint is received during the project.

1. SURVEILLANCE. The COR will receive and document all complaints from

Government personnel regarding the services provided. If appropriate, the COR will send the complaints to the Contractor for corrective action.

2. STANDARD. The performance standard is that the Government receives no more than one customer complaint during the project. The COR shall notify the Contracting Officer of the complaints so that the Contracting Officer may take appropriate action to enforce the inspection clause (FAR 52.212.4, Contract Terms and Conditions-Commercial Items (May 2001), if any of the services exceed the standard.

3. PROCEDURES.

(a) If any Government personnel observe unacceptable services, either incomplete work or required services not being performed they should immediately contact the COR.

(b) The COR will complete appropriate documentation to record the complaint.

(c) If the COR determines the complaint is invalid, the COR will advise the complainant. The COR will retain the annotated copy of the written complaint for his/her files.

(d) If the COR determines the complaint is valid, the COR will inform the Contractor and give the Contractor additional time to correct the defect, if additional time is available. The COR shall determine how much time is reasonable.

(e) The COR shall, as a minimum, orally notify the Contractor of any valid complaints.

(f) If the Contractor disagrees with the complaint after investigation of the site and challenges the validity of the complaint, the Contractor will notify the COR. The COR will review the matter to determine the validity of the complaint.

(g) The COR will consider complaints as resolved unless notified otherwise by the complainant.

(h) Repeat customer complaints are not permitted for any services. If a repeat customer complaint is received for the same deficiency during the service period, the

COR will contact the Contracting Officer for appropriate action under the Inspection clause.

II. PRICING

A. This is a firm fixed price contract payable entirely in Jordan Dinars (JOD). Prices for all

Contract Line Items (CLIN). No additional sums will be payable for any escalation in the cost of materials, equipment or labor, or because of the contractor's failure to properly estimate or accurately predict the cost or difficulty of achieving the results required. The contract price will not be adjusted due to fluctuations in currency exchange rates.

B. The price below includes all costs associated with providing and installing an integrated audio visual system at the Coliseum in accordance with Attachment A, including materials, labor, insurance (see FAR 52.228-4 and 52.228-5), overhead, profit and GST

(if applicable).

C. Value Added Tax (VAT) is not applicable to this contract and shall not be included in the

CLIN rates or Invoices because the U.S. Embassy has a tax exemption certificate from the host government.

Description Unit Price (JOD)

1 Install Audio Visual System at Coliseum Room Lump sum

Total price in Jordanian Dinar

D. After contract award and submission of acceptable insurance certificates, the Contracting

Officer shall issue a Notice to Proceed. The Notice to Proceed will establish a date (a minimum of ten (10) days from date of contract award unless the Contractor agrees to an earlier date) on which performance shall start.

CONTINUATION TO SF-1449,

RFQ NUMBER 19J01021Q0016

SCHEDULE OF SUPPLIES/SERVICES, BLOCK 20

DESCRIPTION/SPECIFICATIONS/WORK STATEMENT

Attachment A

I REFERENCE STANDARDS

All materials, installation and workmanship shall comply with the applicable requirements and standards addressed within the following references.

1. UL: Underwriters Laboratories.

2. EIA: Electronic Industries Alliance.

3. ECIA: Electronic Components Industry Association.

4. TIA: Telecommunications Industry Association.

5. ISO: International Standards Organization.

6. IEC 60268-16, Sound system equipment - Part 16: Objective rating of speech intelligibility by speech transmission index.

7. AVIXA (Formerly INFOCOMM International).

a. ANSI/INFOCOMM 2M – 2010, Standard Guide for Audiovisual Systems Design and

Coordination.

b. AVIXA F501.01:2015 (Formerly INFOCOMM F501.01:2015), Cable Labeling for

Audiovisual Systems.

8. Electrical equipment, devices and components shall comply with the requirements of

EMC:

a. EN 61000-6-3, Electromagnetic compatibility (EMC). Generic standards. Emission for residential, commercial and light-industrial environments.

b. EN 61000-3-2: Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)

9. 47 CFR - Telecommunication, Chapter I - Federal Communications Commission, Part 15

- "Radio Frequency Devices."

II SCOPE OF WORK

1. Provide an integrated audiovisual system including but not limited to system design, engineering, installation, programing, and commissioning within room space.

2. Provide an integrated system meeting the performance criteria, specifications and capacity specified herein, to be ready for the US Embassy's use. System acceptance shall be judged on the successful adherence to the installation instructions and equipment specifications.

3. Installation of raceway, pull-boxes, plywood backboards and floor-boxes. Coordination with the existing infrastructure to verify the appropriate raceways are in place.

4. Civil works in connection with the audiovisual system such as cutting, patching and painting of walls.

III SYSTEM DESCRIPTION

1. The contractor shall provide an integrated audiovisual system within the Coliseum room.

2. The idea behind the design is to equip the room to handle multiple configurations and functions. This includes:

a. Meetings in multiple configurations

b. Audio and Video Conferencing

c. Training and distance learning

d. Hosting Virtual Townhalls

e. Hosting any events that would require the audio and video streaming.

f. Integrating the System with the adjacent studio space and enabling it to support any video shootings or live podcasts.

g. Record, store, and stream the proceeding in the room either through the VTC or through other applications from a computer source.

3. The A/V system shall consist of the following sub-systems:

a. Audio program reinforcement system:

1) Using the existing ceiling speakers, the system shall provide for the playback of recorded presentation material or live material, including microphones or electronic equipment as sources.

2) Audio Digital Signal Processing, including mixing, routing, and amplification of audio signals as specified herein.

3) Video presentation display system

(a) Flat panel display: Wall mounted flat panel display shall provide high resolution/high-definition 16:9 video images from the following sources.

(i) Presentation video from two local computers

(ii) Presentation source from an auxiliary video sources

(iii) Video from VTC Codec

(iv) Video from DVB-T Decoders

(v) As shown on attached Drawings

4. Control system with a touch-screen control panel to allow system user to control the following functions through a user-friendly interface:

a. Turn the system power on and off.

b. Control program and speech volume.

c. Select video and audio sources.

d. Control selected functions of video and audio sources.

e. Control videowall display configuration

5. Control System User Interface

a. The contractor shall work with the end-user to develop the user interface of the control touch panel, and it shall cover the control functionalities specified herein and indicated on drawings.

b. Control system user interface pages shall be design for this project exclusively. While there are several design approaches designing the user interface, the following guideline shall be adhered to:

1) All panels shall indicate the name of the room, the equipment of function being controlled.

2) The interface design shall - to the greatest extent possible- retain the same design throughout the project taking into consideration any possible variation in the system throughout different spaces.

c. The user interface design shall be subject to the Contracting Officer Representative

(COR) approval.

d. Devices similar in nature, shall be programmed to operate with a common format.

e. Functions used during a general presentation shall be accessible with a minimal amount of button presses/page flips.

f. Where feasible, multi-level access to controls should be implemented.

g. During performance testing, all equipment shall be operated under standard conditions as recommended by the manufacturer.

6. The AV system shall be able to integrate and feed audio and video signals to a computer to enable the broadcasting of those signals through third party applications.

IV CONFIDENTIALITY

1. The Contractor shall respect and protect the privacy and confidentiality of US Embassy, his employees, processes, products, and intellectual property to the extent necessary, consistent with the legal responsibilities of the US Embassy policies.

2. The Contractor shall be granted access to visit the project site to evaluate the project requirements and accordingly submit his offer.

V GENERAL CONDITIONS

1. The Contractor shall be familiar with and shall have expertise in the works of this nature and scope. The Contractor shall provide all works as required to produce a complete job of that which may not be fully defined in the Contract Documents.

2. The Contractor shall comply with all the regulations, including safety regulations of national, city, local and other government agencies having jurisdiction concerning the works.

The Contractor shall give all notices and comply with all laws, ordinances, codes, rules, and regulations bearing on the conduct of the works. If the Contractor performs any work, which is contrary to such laws, ordinances, codes, rules, and regulations, he shall make all changes for compliance and bear all associated costs.

3. The Contractor shall provide all protection necessary to safeguard the works from damage by his operations and the operations of others.

4. The Contractor shall coordinate the installation of all devices and/or equipment with the

US Embassy / COR prior to installation based on the existing field conditions.

5. The Contractor warrants that he is licensed as required by local regulations.

6. The US Embassy may separately purchase and/or provide certain equipment and miscellaneous items that will be installed during the course of the installation process. Such items may not be indicated in this document.

7. Where there are conflicts within the documents, the overall design intent shall govern.

Any discrepancies in these documents shall be brought to the COR’s attention.

8. No portion of the works shall commence, nor shall any equipment be procured until the

COR has approved of the submittal in writing.

9. Contractor is responsible to provide final shop drawings to indicate the exact numbers of conduits, wire mesh, junction boxes and routings, FAC team will only supply and install the rough in per the final shop drawings and will do the connections to the electrical power panels, contractor will be responsible about any shop drawings changes after the final drawings are submitted. Moreover, to reduce the number of conduits the use wire mesh is recommended were applicable

10. Contractor must comply with the cables color coding used in the US Embassy and specified herein.

VI QUALITY ASSURANCE

1. Contractor’s Qualifications:

a. Works specified herein shall be the responsibility of the Audiovisual Systems Contractor with a minimum documented experience of five years prior to commencing the corresponding work for the Project in the fabrication, assembly, and installation of Systems of similar complexity as specified herein. The documentation shall include the names, locations, and points of contact for at least five installations of the type and complexity specified herein.

b. Installer Training Process: Contractor’s labor force shall have certified installers who have attended training programs of the proposed system preparing them to perform the work.

c. In order to maintain certain manufacturer's warranties, system equipment must be installed, aligned and serviced by those installers recognized and authorized by said manufacturers to be capable of performing such duties. If a certain installer is not so authorized by a particular manufacturer, it is solely their responsibility to make such arrangements to come into such compliance and they shall bear all costs and consequences thereof.

2. Materials and Equipment

a. Materials and equipment shall conform to the latest issue of referenced industry standards, publications, or regulations referenced in this Section, as applicable.

3. Equipment Country of Origin

a. Equipment Country of Origin (manufacturing country) shall be indicated in the proposal at time of bid submission.

VII SITE SURVEY AND INSTALLATION

1. General

a. Before construction works commence, Contractor shall visit the site and identify the exact routing for all cable pathways and equipment placement, verify all dimensions, locating the works and their relation to existing works, all existing conditions and their relation to the works and all obstructions and conditions, etc. affecting the completion and proper execution of the works as indicated in the project drawings and specifications.

b. Verification of Conditions: Examine the areas to receive the works and the conditions under which the works would be performed. Contractor shall remedy conditions detrimental to the proper and timely completion of the works. Do not proceed until unsatisfactory conditions have been corrected.

c. All equipment locations shall be coordinated with existing conditions to eliminate interference with required clearances for equipment maintenance and inspections and to the approval of the COR.

d. Install cabling and equipment to facilitate maintenance and repair or replacement of equipment components. Provide easy, safe and code mandated clearances at equipment racks and enclosures, and other equipment requiring maintenance and operation. Coordinate with the

COR the exact location and mounting height of all equipment in finished areas, such as A/V cabinets, equipment racks, termination equipment, communication, and electrical devices. As much as practical, connect equipment for ease of disconnecting, with a minimum of interference with other installations.

e. Prior to ordering equipment, the Contractor shall coordinate the frequencies of all wireless devices to prevent unwanted interaction between devices and rooms.

f. All accessories, including rack mounting hardware, power supplies, etc., shall be obtained from the original equipment manufacturer. Unless otherwise noted or specified, Third

Party accessories shall not be used.

2. Workmanship

a. All labour must be thoroughly competent and skilled, and all work shall be executed in strict accordance with the best practice of the trades.

b. Carefully lay out all works in advance and install in a neat and workmanlike manner in accordance with recognized good practices and standards.

VIII SUBMITTAL

1. The submittal documents shall include the following:

a. Equipment schedules listing all System components, manufacturer, model number and the quantity of each.

b. General functional description for each System.

2. Manufacturer’s product data sheets for all materials and equipment proposed for use on the Project sorted by room and indexed. Include any warranty information:

a. Mark each product data sheet to show applicable choices and options (sheets containing more than one device or component model number shall be clearly marked to delineate items included in the works).

b. Manufacturer’s Data: For each manufactured device, submit manufacturers’ specifications and print photograph of the proposed device. Include Engineering description, principle of operation, application, and proposed model, style or size clearly indicated.

c. Equipment Datasheets to include as a minimum the following:

1) Product performance and features,

2) Electrical and Environmental requirements (power supply, temperature, humidity, etc.),

3) Troubleshooting guide,

4) Standard tests passed and results,

5) Product certificates,

6) Specify type of testing: in operation or in laboratory.

3. Provide data for all the equipment specified herein and indicated on the drawings

(i) Video Processors, switchers, transmitters/receivers

(ii) Digital Signal Processing (DSP) audio processors

(iii) Digital Mixing Consoles.

(iv) Amplifiers

(v) Signal conversion, transmission, and scaling.

(vi) Video Display Systems and their controllers.

(vii) Video Sources

2) All cable types required for audio and video signal transmission.

4. Unless stated, equipment finish colour shall be coordinated with the COR.

5. Closeout Submittals (Record Documents):

a. Record Documentation shall include all information required in the Pre-fabrication

Submittals but revised to reflect “As-Installed” or “As-Built” conditions.

b. The Contractor shall submit Record Documents (in a format compatible with Microsoft software unless otherwise indicated) for products and systems including but not limited to:

1) Schematic network diagrams.

2) Parts lists.

3) Software and Firmware Operational Documentation:

(a) Software operating and upgrade manuals.

(b) Program Software Backup: On magnetic media or compact disk, complete with data files.

(c) Printout of software application and graphic screens.

(d) All programming and source-code shall be considered as a work for hire and shall be the property of the US Embassy upon completion of the project.

4) Manufacturers' information on all system components.

5) Recommended list of spare parts and components to be stocked at Project site.

6) Test Reports.

7) Training Manuals.

8) Warranties.

9) Record (As-Built) Drawings.

c. Record (As-Built) drawings: Dimensions and scale of the drawing sheets shall match those used for the Contract documents and shall include the components and labelled cable numbers.

1) Utilize normal recognized drafting procedures.

2) Graphical symbols and component identification on detail drawings should use commonly understood, unique and unambiguous symbols (an example of such a system is IEC

60617) – subject to the approval of the COR.

3) The As-Built drawings shall incorporate all changes made to the project identified in, but not limited to, addenda, change notices, site instructions or deviations resulting from site conditions.

4) Contractor shall provide dimensioned plan and elevation views of networking components, showing:

(a) Floor plan drawings indicating device locations, with device legends indicating manufacturers and model numbers for each device.

(b) Floor plan drawings indicating wire routing: wire routing shall be delineated in straight line runs and be tagged with cable identification and terminal strip numbers to coincide with the installation.

(c) Mounting details for all equipment and hardware.

(d) Functional block diagrams for each subsystem.

(e) Wiring details showing rack elevations, equipment wiring and terminations, and inter-rack wiring.

(f) Wiring diagrams for all custom circuitry including interfaces to various control output-controlled devices, lighting control interfaces, etc.

(g) Wiring diagrams for each System: wiring diagrams shall be identical to those laminated and located within the door of rack/cabinet.

(h) Layout details for each riser location, including audiovisual panels, power supplies, junction boxes, conduit, and any other audiovisual related equipment.

IX WARRANTY AND MAINTENANCE

1. Contractor shall provide a Three years warranty for the works, Systems, and subsystems specified herein, including all materials, software, and labor, to be free from defects in design, workmanship, and materials.

2. Warranty period shall commence from date of Taking Over of the SYSTEM.

X MANUFACTURERS

While subject to compliance with specifications and functionality, manufacturers offering products incorporated into the works include but not limited to:

1. Wire and Cable

a. Extron

b. Crestron

c. LibertyAV

d. AMX

e. Commscop

f. Belden

g. Gepco

2. Digital Signal Processors

a. Crown

b. Dynacord

c. Crest Audio

d. Biamp

e. Ashly

f. QSC

3. Power Amplifiers

a. Crown

b. Dynacord

c. Crest Audio

d. Ashly

e. QSC

4. Microphones and Accessories

a. Shure

b. Sennheiser

c. Beyerdynamic

d. Audio Technica

5. Digital Audio Mixing Console

a. Allen & Heath

b. Digico

c. Soundcraft

d. Yamaha

e. Midas

f. Mackie

6. Balanced XLR Patch Panel

a. Allen & Heath

b. Digico

c. Soundcraft

d. Yamaha

e. Midas

f. Mackie

7. Simultaneous Translation System

a. Sennheiser

b. Listen technologiesDIS

c. Shure

d. Bosch

e. Brahler

f. Televic

g. Taiden

8. Equipment Racks/Cabinets.

a. Middle Atlantic

b. Chatsworth

c. Atlas

9. Digital Extender Transmitter/Receiver

a. Extron

b. Crestron

c. AMX

10. Digital Video Matrix Switcher

a. Extron

b. Crestron

c. AMX

11. PTZ Camera

a. Sony

b. Panasonic

12. Video Scaler

a. Extron

b. Crestron

c. AMX

13. System Controller

a. Crestron

b. Extron

c. AMX

14. Wired/wireless touch panels

a. Crestron

b. Extron

c. AMX

15. Flat Panel displays

a. LG

b. Samsung

c. Sony

d. Panasonic

e. Philips

16. Wireless Presentation System

a. Extron

b. Crestron

c. AMX

d. Sony

17. Media Recorder

a. Blackmagic Design

b. Extron

c. Crestron

18. Media Player

a. LG

b. Samsung

c. Tascam

d. Blackmagic Design

19. USB Extender

a. Extron

b. Crestron

20. Video Wall Systems

a. Samsung

b. LG

c. Christie

d. Barco

e. Planar

f. Extron

g. Crestron

21. Display Mount

a. Peerless

b. Chief

c. Premier

d. Omnimount

22. AV Connection Plates

a. Extron

b. Crestron

c. AMX

XI SPECIFICATIONS

1. Wire and Cable

a. General Description:

1) Cables for A/V systems have been specified in accordance with North American

Standards since A/V cables are widely available and specified as such in this field in the industry. Contractor may propose materials and systems that comply with alternative

International Standards: for example, European Standards (rather than North American

Standards and UL listed products).

2) Alternative Standards may be considered when proposed in writing, complete with manufacturers’ specifications and associated revised Drawings.

b. Low impedance Loudspeaker Cable:

1) Single-pair, twisted, 2 x No. 12 AWG stranded bare copper conductors, PVC insulated, and foil-shielded pairs with 100 percent shield coverage.

2) NFPA 70, Plenum Rated, Type CMP, overall PVC jacket.

c. High impedance Loudspeaker Cable

1) Single-pair, twisted, No. 18 AWG (1.220 mm diameter) stranded (7x26) bare copper conductors, PVC insulated.

2) NFPA 70, Type CMG, overall PVC jacket.

d. Digital Audio Cable (110 Ohms):

1) Single-pair, twisted No. 24 AWG (0.610 mm diameter) stranded (7x32) tinned copper conductors, foil-shielded pair with 100 percent shield coverage.

2) Pair is cabled on common axis with No. 24 AWG, stranded (7x32) tinned copper drain wire.

3) Nominal impedance: 110 ohms.

4) Nominal conductor DCR: 77.7 ohms/km.

5) Nominal shield DCR: 62.0 ohms/km.

6) Attenuation: 5.58dB/100m at 5MHz and 10.10 dB/100m at 25MHz.

7) NFPA 70, Type CMG, nominal velocity of propagation: 76%, foam polyolefin insulation, PVC jacket.

8) NFPA 70, Type CMP, nominal velocity of propagation: 78%, foam FEP (Fluorinated

Ethylene Propylene) insulation, Plenum PVC jacket.

e. HDMI Cable

1) Performance: The Cable shall be able to deliver resolutions up to 4K (3840 x 2160) @

60Hz with (4:4:4) Chroma Sampling with a minimum of 8-bit per colour, and shall provide a minimum TMDS data transmission bandwidth of 18Gbps.

2) Conductors: The cable conductor shall have a minimum thickness of 24 AWG.

3) The cable shall have a dual shield against EMI/RFI.

4) NFPA 70, Plenum Rated, Type CMP; overall plenum PVC jacket.

5) Shall support Ethernet channel.

6) The Cable shall comply with the following:

(a) HDMI 2.0b or latest available

(b) HDCP 2.2

(c) EDID

7) The connector shall provide a minimum of 10lb of retaining force for a non-slip connection.

f. Display Port Cable

1) Performance: The Cable shall be able to deliver resolutions up to 4K (3840 x 2160) @

60Hz with (4:4:4) Chroma Sampling with a minimum of 8-bit per colour, and shall provide a minimum TMDS data transmission bandwidth of 21.6Gbps.

2) Construction: The cable conductor shall have a minimum thickness of 24 AWG.

3) The cable shall have a dual shield against EMI/RFI.

4) NFPA 70, Plenum Rated, Type CMP; overall plenum PVC jacket

5) The Cable shall comply with the following:

(a) DisplayPort V1.2 or latest available

(b) HDCP 2.2

(c) DPCP

(d) EDID

6) The connector shall provide a minimum of 10lb of retaining force for a non-slip connection.

g. Optical HDMI Cable

1) Performance: The Cable shall be able to deliver resolutions up to 4K (3840 x 2160) @

60Hz with (4:4:4) Chroma Sampling with a minimum of 8-bit per colour, and shall provide a minimum TMDS data transmission bandwidth of 18Gbps.

2) Cable Construction; hybrid glass optical fibre and copper.

3) The cable shall have a dual shield against EMI/RFI.

4) NFPA 70, Plenum Rated, Type CMP; overall plenum PVC jacket.

5) Shall support Ethernet channel.

6) The Cable shall comply with the following:

(a) HDMI 2.0b or latest available

(b) HDCP 2.2

(c) EDID

7) The connector shall provide a minimum of 10lb of retaining force for a non-slip connection.

h. Twisted Pair Balanced Cable

1) Balanced S/FTP cable - Category 6A - for Indoor Use: 100-ohm, 23 AWG copper conductor, four-pair S/FTP, Screened Shielded twisted pair Cable (braided screened overall, individually foil shielded twisted pairs cable), insulation and covered with a purple color, Thermoplastic jacket and provided with a drain wire.

2) Standards

(a) Comply with TIA-568-C.2.

(b) Cable shall be listed and labeled by an NRTL acceptable to authorities having jurisdiction as complying with UL 444 and NFPA 70 for the, Plenum Rated: Type CMP, complying with

NFPA 262.

2. Audio Digital Signal Processors

a. An audio digital signal processor shall have the following minimum functions and features.

1) Programmable and configurable to allow for changes in system functions, features and control.

2) System management and control via Ethernet LAN.

3) Frequency response of: 20Hz - 20KHz ±0.25dB

4) Internal 24-bit A/D & D/A converters operating at a minimum sampling rate of 48 KHz

5) Routing and mixing of audio signals.

6) Equalizer: Graphic 15-band minimum.

7) Automatic feedback Elimination/Suppression.

8) Dynamic and spectral processing of audio signals including but not limited to filtering, compressor, limiters, gates, as well as control, monitoring, and diagnostic tools.

9) Filters include but not limited to: Low-Shelf, Hi-Shelf, Low-Pass, and High-Pass.

10) Total Harmonic Distortion plus noise (20Hz-20 KHz): less than 0.05%.

b. Input /Output Connector: ¼” TRS or XLR; Balanced

c. Shall provide the number of inputs and outputs as indicated on the drawings.

3. Audio Power Amplifiers

a. The Audio Amplifier system shall meet the following criteria:

1) The rated power of the amplifier shall be sized at twice the continuous (RMS) load of the speakers connected to it and shall allow for a 20dB SPL extra headroom; whichever more stringent.

2) The audio amplifier power rating shall be selected to compensate to any calculated voltage drops along the line. The voltage drop calculation shall be submitted along with the amplifier selection, subject to the COR’s approval.

3) Controlled and monitored via an available Ethernet port(s)

4) Shall provide 40% room for future expansion

5) Performance Criteria

(a) Frequency Response: 20Hz to 20kH ± 0.25dB at 1W into 4 ohms

(b) Total Harmonic Distortion: less than 0.05% at the rated output power at 70Volt at 1KHz

(c) Hum and Noise at rated power: Less than -90dBu residual noise

(d) Crosstalk at 1KHz at rated power shall not exceed -70dB

6) Physical Properties

(a) Rack-mounted

(b) Power Supply

(c) Fan-Cooled

4. Ceiling Microphone Array

a. Description: The ceiling array microphone shall consist of directional pickup lobes to capture individual talkers and deliver discrete audio. It shall support multiple channels, and 1 echo reduction reference receive channel. The microphone shall provide built-in digital signal processing to deliver steerable coverage, echo reduction, automatic mixing, and equalization.

Browser-based control software shall provide the ability to aim individual lobes based on participant seating, and control digital signal processing from any computer on the network.

Pickup lobe width shall be selectable, with narrow, medium, and wide settings. Mounting options shall include ceiling tile, and VESA mounting options.

b. Specifications:

1) Frequency Response: 200 Hz-16KHz

2) Sampling Rate: 48KHz @ 24bit

3) Sensitivity: 0.75 dBFS/Pa at 1KHz

4) SNR: 90 dB SPL at 1KHz

5) Latency does not exceed 6ms

5. Lectern/Table Mounted Wireless Gooseneck Cardioid Microphone

a. Cardioid pattern, condenser/capacitor element

b. Phantom power, 48 VDC

c. UHF wideband, frequency agile operation

d. 6 hours minimum operation on set of batteries (or) single charge at full output

e. Mute Switch (logic type), with separate output contact and LED indicator (red = mute, green = active or ‘on’)

f. Shock mount base permanently mounted in lectern or table

6. Wireless Handheld Microphone Transmitter

a. Cardioid pattern, condenser/capacitor element in interchangeable capsule

b. UHF wideband, frequency agile operation

c. On/off switch on transmitter unit. Other controls shall be hidden and locked out from user operation

d. Operation on single-use alkaline and/or rechargeable batteries

e. Switchable or automatically variable output power

f. 6 hours minimum operation on set of batteries (or) single charge at full output

7. Wireless Microphone Receivers

a. Rack-mount receiver units shall be gang-able with rack mounting hardware

b. UHF wideband, frequency agile, true-diversity operation

c. Auto-scan, Auto-set feature to identify un-used frequencies and allocate coordinated frequencies when multiple units in use.

d. Status link to transmitter units and display of status and monitoring remotely

e. Employs noise reduction companding.

f. Include remote mounted ½ -wave antennae and mounting accessories

g. Include rack-mount active antennae distribution splitter and hardware for installations of multiple receivers.

8. Modular Freestanding Cabinets, steel, or aluminium

a. Removable and lockable side panels.

b. Solid top panel.

c. Hinged and lockable full perforated metal (mesh) front door.

1) High flow vented door offering around an 80% free area.

d. Hinged and lockable split perforated metal (mesh) rear door.

1) High flow vented door offering around an 80% free area.

e. Adjustable feet for levelling.

f. Supports internal baffles to control front-to-rear airflow.

g. Cable access provisions in the roof and base.

h. Grounding bus bar.

i. Back-mounted fan with filter.

j. Module Dimensions:

1) 800 mm (width) x 800 mm (depth) in increments of 25mm (0.98”), compatible with

EIA/ECA-310-E standard, 19-inch (482.6-mm) panel mounting, high, 48 RU mounting space.

2) Dimensions shall be coordinated with the actual selected active and passive equipment.

k. Equipment load bearing capacity: not less than 1134 kg (2500 lb) static load when the load is evenly distributed.

l. Adjustable mounting rails that slide front to rear for greater space utilization.

m. The fastening system used to mount equipment and components shall be through

EIA/ECA-310-E Universal hole pattern threaded screws or square punched rail holes to accept cage nut hardware.

n. Vertical power strip, extending the full height of the cabinet.

o. All cabinets keyed alike.

9. Flat Panel displays

a. Display Sizes

1) 98”, 65” viewable image size; as indicated on drawings.

b. Video Properties

1) Colors --- 1.07 billion

2) 3840 x 2160 @ 60Hz (Digital) Minimum native resolution

3) 8 ms Display Response Time

c. Display Properties

1) Closed Caption Decoder

2) Minimum Viewing Angle: Horizontal: 178°, Vertical: 178°

3) Refresh Rate: up to 60 Hz

4) Minimum Brightness: 500Nits

5) Maximum Black Level: 0.05Nits

6) Contrast Ratio: 10,000:1 Minimum

7) Anti-Glare, Anti-Reflective screen treatment

8) Operating Temperature --- 0° to 35°C (32° to 95°F)

9) Operating Humidity --- 20% to 90%, non-condensing

10) Power Save mode

11) Power Timer

12) Internal Power Supply

13) System management and control via Ethernet LAN

14) Audio Power 20W (10W x 2) minimum

d. Formats Supported

1) HDTV Formats 720p / 1080p / 2160p Minimum

2) NTSC, NTSC4.43

3) SECAM

4) PAL, PAL60, PAL-M, PAL-N

5) VESA type graphics, up to 1920x1200 (WUXGA) minimum

e. Other Analog/Digital Video inputs

1) Digital Broadcasting (DVB-T/T2)

2) RF Antenna/Cable

f. Connections

1) HDMI

(i) HDCP2.2 Compliant or later

(ii) Version 2.0b compliant or later

2) Optical Audio (SPDIF or similar)

3) Ethernet/TCP-IP (RJ-45)

4) USB

5) Wi-Fi IEEE 802.11ac

6) RS232 Control

7) Infrared

g. Accessories:

1) User's Manual, power cord, wireless remote control and remote mouse receiver with batteries.

10. Digital video Extender Transmitter / Receiver

1) Video Signal properties:

(a) Maximum data rate: 18 Gbps (6 Gbps per color)

(b) Maximum pixel clock: 600 MHz

(c) Resolution range: Up to 3840x2160 or 2160p @ 60 Hz with 4:4:4 Chroma Sampling.

(d) Formats: RGB and YCbCr digital video

(e) Color bit depth: 8,10,12

(f) Standards DVI 1.0, HDMI2.0b, [HDCP2.2]

2) Video Input, Transmitter Units

(a) Single link HDMI (or DVI-D with appropriate adapters)

(b) Single connector HDMI type A

3) Transmitter / Receiver Interconnection

(a) Connectors: 1 female RJ-45 per unit for 1 cable connecting the transmitter and receiver

(b) Termination standards: ANSI/TIA T568B

(c) Signal transmission distance at 3840x2160 or 2160p @ 60 Hz is 100m minimum using a shielded twisted pair (S/FTP) cable.

4) Video Output, Receiver Units

(a) Single link HDMI (or DVI-D with appropriate adapters)

(b) Single connector HDMI type A

5) Audio

(a) Gain: Unbalanced output: 0 dB; balanced output +6 dB

(b) Frequency response: 20 Hz to 20 kHz, ±0.5 dB

(c) THD + Noise: 0.03% @ 20 Hz to 20 kHz at maximum output

(d) S/N: >90 dB, at maximum output (15 dBu), balanced (unweighted)

(e) Stereo channel separation : >80 dB @ 1 kHz to 20 kHz

6) Audio Input

(a) Number/signal type:

(i) 1 PC level stereo, unbalanced

(ii) 1 Digital Embedded Audio on HDMI

(b) Connectors:

(i) (1) 3.5 mm stereo jack, 2 channel; tip (L), ring (R), sleeve (ground)

(ii) (1) Female HDMI

(c) Impedance: >10k ohms, DC coupled

(d) Nominal level:-10 dBV (316 mVrms)

(e) Maximum level: +7 dBV (unbalanced)

7) Audio Output

(a) Number/signal type: 1 stereo (2 channel), balanced/unbalanced

(b) Connectors: (1) 3.5 mm captive screw connector, 5 pole

(c) Impedance: 50 ohms unbalanced, 100 ohms balanced

(d) Gain error : ±0.1 dB channel to channel

(e) Maximum level (600 ohm) : >+11 dBu, balanced

8) Control/remote — external device(pass-through)

(a) Serial control port input

(i) Transmitter: RS-232 connector

(ii) Receiver: RJ-45 jack

(b) Serial control port output

(i) Transmitter: RJ-45 jack

(ii) Receiver: RS-232 connector

9) Power supply:

(a) External or

(b) Remote by receiver or transmitter on the other end of the Cat 6A cables

11. Digital Video Matrix Switcher

1) The Matrix Switcher shall be modular, scalable, and expandable by means of using hot-swappable input and output cards.

2) Signal Type: TMDS digital and digital video signal

(a) Digital Video: RGB digital video (Display Port and HDMI standards) or Y, Cr, Cb digital component video (HDMI), actively buffered (supports all single and dual-link DVI and HDMI standards up to 3840x2160 @ 60Hz minimum computer video

(b) Shall comply with HDMI 2.0b and Display Port 1.2 or later.

(c) Digital audio: HDMI audio transmitted through the RGB and Y, Cr, Cb lines, actively buffered.

(d) Extended Display Identification Data (EDID) through HDMI and Display Port standards shall be supported.

(e) HDCP: Compliant with High-bandwidth Digital Content Protection (HDCP 2.2) through

Display Port and HDMI standards

(f) HPD: Supports hot plug detection (HPD) of display as a pass-through signal.

3) Gain: Unity

4) Resolution range up to 3840x2160 @ 60Hz minimum with Chroma Sampling of 4:4:4 at

8-bits per colour.

5) Shall have a minimum Switching backplane of 18Gbps (6Gbps per colour)

6) Shall allow video and audio signals to be routed independently (break-away routing)

7) Video input

(a) Number and type of inputs shall be as indicated on drawings with including indicated the spare inputs.

(b) Device connection types include but not limited:

(i) Connection through HDMI/Display port interfaces.

(ii) Connections via fiber optic transmitters

(iii) connections via twisted pair transmitters

(iv) Video, audio, control, and Ethernet extension over a shielded CAT 6A cable

(c) The input selection criteria shall be achieved using input cards.

(d) Shall provide cable equalization for each digital input

8) Video output

(a) Number and type of output shall be as indicated on drawings including the indicated spare outputs.

(b) Device connection types include but not limited:

(i) Connection through HDMI/Display port interfaces.

(ii) Connections via fiber optic transmitters

(iii) Connections via twisted pair transmitters

(iv) Video, audio, control, and Ethernet extension over a shielded CAT 6A cable

(c) Where indicated on drawings the Matrix switcher’s output shall have a built-in audio de-embedding functionality, to deliver an audio output.

(d) Reshape and restore timing of digital video signals at each output

(e) provide support for automatically adjusting color bit depth output based on the attached display EDID information

9) Audio Requirements

(a) support independent routing of audio and video signals (break-away routing)

(b) support down-mixing of embedded multi-channel audio

(c) support embedding of analog audio

(d) support de-embedding of digital audio

(e) support audio input gain and attenuation for analog signals

(f) support audio output volume adjustment and muting for analog signals

10) Control Requirements

(a) Serial control port:RS-232, connector and mini stereo jack

(b) Ethernet control port RJ-45 female connector

(c) Ethernet data rate: 10/100Base-T, half/full duplex with auto detect

(d) Ethernet protocols: ARP, ICMP (ping), IP, TCP, DHCP, HTTP, Telnet

11) A hot-swappable redundant international power supply included.

12) Shall be Rack-Mounted

12. Video Scaler

1) Description: shall scale an input resolution to an output resolution

2) Signal Type: TMDS digital and digital video signal

3) Scaled Resolutions: 640x480, 800x600, 1024x768, 1280x768, 1280x800, 280x1024, 1360x768, 1366x768, 1440x900, 1400x1050, 1600x900, 1680x1050, 1600x1200, 1920x1200, HDTV: 480p, 576p6, 720p, 1080i, 1080p, 2K (2048x1080), 2048x1200, 2048x1536, 2560x1080, 2560x1440, 2560x1600, 3840x2160,4K (4096x2160)

4) Extended Display Identification Data (EDID) through HDMI and Display Port standards shall be supported.

5) HDCP: Compliant with High-bandwidth Digital Content Protection (HDCP 2.2) through

Display Port and HDMI standards

6) Gain: Unity

7) Resolution range up to 3840x2160 @ 60Hz minimum with Chroma Sampling of 4:4:4 at

8-bits per colour.

8) Shall have a minimum Switching backplane of 18Gbps (6Gbps per colour)

9) Shall allow video and audio signals to be routed independently (break-away routing)

10) Video input

(a) Number and type of inputs shall be as indicated on drawings with including indicated the spare inputs.

11) Video output

(a) Number and type of output shall be as indicated on drawings including the indicated spare outputs.

(b) Where indicated on drawings the Matrix switcher’s output shall have a built-in audio de-embedding functionality, to deliver an audio output.

(c) Reshape and restore timing of digital video signals at each output

(d) provide support for automatically adjusting color bit depth output based on the attached display EDID information

12) Control Requirements

(a) Serial control port:RS-232, connector and mini stereo jack

(b) Ethernet control port RJ-45 female connector

(c) Ethernet data rate: 10/100Base-T, half/full duplex with auto detect

13) Shall be Rack-Mounted

13. System Controller

a. Control System shall be fully compatible with Room management software and third-party applications (i.e. Outlook, MS Exchange, etc.)

b. Shall provide the required control interfaces to control the devices indicated in the drawings and perform the functions described herein as and in the drawings.

c. Shall be compatible with Cisco Webex Room Kit Pro VTC codec through API integration or otherwise in order to control the basic functionality of the codec.

d. Minimum control system requirements:

1) Network Connections:

(a) Control System shall support 10/100BaseT Ethernet LAN

(b) Supports: TCP/IP, DHCP DNS, SNMP, IPv6 Support

(c) Native Email Client

(d) Remote Diagnostics

(e) Remote Program Loading and Administration

(f) Built-In Web Server

(g) Encrypted and secure communication.

2) Control system shall include:

(a) Three 2-way RS-232/422/485 ports.

(b) Eight IR/serial/1-way RS-232 ports.

(c) Eight isolated low-voltage relays - 30VDC @1A.

(d) Eight digital/analog I/O ports - TTL In/Out & analog inputs 0-10V.

3) Internal power supply.

14. Wired Wall Mount touch panel

a. Minimum resolution of 1920x1080 pixels minimum

b. Touch Screen shall be a capacitive TFT active matrix LCD with a size of [15”] minimum

c. Support graphic animation on a variety of object styles.

d. Embedded operating system

e. Shall have a PoE connection for power and control.

f. Shall support the following protocols: DHCP, DNS, HTTP, HTTPS, ICMP, SFTP, SSH, TCP/IP, UDP/IP

g. Applications for Web browsing, streaming media, conferencing, VoIP, and remote computer access

h. Shall have a built-in speaker

15. Wireless touch panel

1. 7”-10” minimum active screen display

2. Embedded operating system

3. Programmable "softkey" buttons

4. Applications for Web browsing, streaming media, conferencing, VoIP, and remote computer access

5. Streaming video from network cameras and servers

6. 802.11b/g/n/ac Wi-Fi communications

16. Wireless Presentation System

a. System features:

1) Enables wireless presentation of HD content using laptops, tablets, and smartphones

2) Compatible with Windows®, OS X®, Apple® iOS®, and Android™ operating systems.

3) Displays up to four presentation sources at once in Quad View

4) Supports display resolutions up to [2160 (3840x2160) over HDMI v2.0]

5) Provides HDMI V2.0 or Display Port outputs, and analogue audio outputs

6) Provide Control over Ethernet 10/100Mbps and RS-232.

7) Allows viewing and saving of presentation images through a Web browser

8) No software installation required for guest PC and Mac users

9) Fully managed over the network.

17. Digital Audio Mixing Console

1) Connections:

(i) Analog Inputs: 32

(ii) Analog Outputs: 16

(iii) Ethernet

(iv) All RJ45 Connections shall utilize EtherCon Connectors.

2) Mixing:

(i) Input Mixing Channels: 32 inputs mono + 2 stereo

(ii) Mix Busses: minimum 4 time-aligned and phase-coherent output.

3) Functions and Features:

(i) Pre-set (scene) Memory including fully recallable preamp and faders: 32 minimum

(ii) Dynamic processing: Equaliser, Gate, Ducking, Compressor, Expander.

(iii) Shall be controllable form a portable touch panel or iPad.

4) User Interface:

(i) 12” Capacitive touch screen display

(ii) Faders: 32 minimum

5) General Specifications:

(i) Sampling frequency: up to 48KHz 24-bit DAC/ADC minimum

(ii) Signal latency/delay less than 2.5ms @ 48KHz,

(iii) 100mm Motorized fader.

(iv) Frequency response: 20 Hz – 20 KHz +0/-0.5dB.

(v) Dynamic range: 110dB minimum.

(vi) Hum & noise level: -90dBu Residual noise

(vii) Total Harmonic Distortion (20Hz-20 KHz): Less than 0.05%

(viii) Crosstalk at 1KHz shall not exceed -100dB

6) Inputs:

(i) Mic. /Line XLR inputs: Balanced XLR, +48V phantom power

(ii) Input Sensitivity: -60 to +5dBu.

(iii) Input Impedance: >4KΩ / >10KΩ (pad out/pad in)

(iv) Phantom Power Indication/sensing per socket, triggered at 24V.

(v) 4-Band parametric equaliser

7) Outputs:

(i) Analogue XLR outputs: Balanced and relay protected.

(ii) Output Impedance <75Ω

(iii) Nominal output: +4dBu

18. Simultaneous Translation System

1) System Description

(a) The System shall provide the ability to deliver a minimum 2 translated speeches to the audience in the room simultaneously through dedicated channels.

(b) Provide the possibility for the listeners to switch between the channels (Languages) &

Volume Controls.

(c) The system shall cater for 70 receiver units with an additional spare of 10%.

2) Product

(a) Simultaneous Interpretation

(i) Digital Conference Master

(ii) Interpreter Sets

(iii) Microphone/Headphone sets for Interpreter Sets

(iv) Audio Output Unit

(v) Conference Management Software

(vi) Radio Transmission Equipment

(vii) Rechargeable batteries

(viii) Storage Case with recharging apparatus built-in

(ix) Appropriate signage, in local language(s), as required by local/national code

19. PTZ Camera

a. Output resolution 3840x2160 @ 30Hz

b. Video Output Format

1) HDMI V2.0

c. Pan Tilt Zoom

1) PAN ± 100°

2) TILT ± 25°

3) Zoom 10x (optical)

d. Image Sensor: CMOS

e. Total Horizontal field of view: 260 degrees.

f. Horizontal field of view: 77 degrees.

g. Total Vertical field of view: 96 degrees.

h. Vertical field of view: 40 degrees.

i. Min. illumination 20 Lux (F1.8)

j. 16:9 Aspect ratio

k.…