RFQ - Wheel and Tire Self Generating Nitrogen.pdf

Department of the Air Force 436th Contracting Squadron - DOVER AFB

ND

Combined Synopsis/Solicitation

Requirement Title:

Solicitation Number:

Solicitation Issue Date:

Wheel and Tire Self Generating Nitrogen Inspection/Servicing

FA4497-23-Q-0044

2 August 2023

Questions Response Deadline: 16 August 2023; no later than 1:00 PM EST

Quote Response Deadline:

Point(s) of Contact:

Contracting Officer:

1 September 2023; no later than 1:00 PM EST

SSgt Luis Rivera / luis.rivera_morales@us.af.mil / 302-677-5215

Ms. Lauren Reed-Smart / lauren.reed-smart@us.af.mil / 302-677-5211

1. This is a combined synopsis/solicitation for commercial products prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation.

Quotes are being requested and a written solicitation will not be issued.

2. This solicitation is being issued as a Request for Quotation (RFQ).

3. This solicitation document and incorporated provisions and clauses are those in effect through:

Federal Acquisition Circular FAC 2023-04 Defense Federal Acquisition Regulation Public Notice DFARS 6/09/2023 Department of the Air Force Federal Acquisition Circular DAFFARS 07/07/2023

4. This acquisition is set-aside for 100% Small Business concerns.

5. The North American Industry Size Classification System (NAICS) code associated with this requirement is 811310 and the Small Business Size Standard associated with this NAICS is $12,500,000.00

6. The Provisions and clauses listed within this document and Attachment 2 – Clauses and Provisions apply to this acquisition and can be viewed through internet access at https://www.acquisition.gov.

Description:

Dover Air Force Base has a requirement for the Wheel and Tire Self Generating Nitrogen in accordance with Attachment 1 – Performance Work Statement.

Place of Performance/Acceptance/FOB Point:

F.O.B. Destination: Dover, AFB DE 19902 (exact customer address will be provided in the resulting contract) Base Year Period of Performance: 1 October 2023 - 30 September 2024.

Requirement Information

General Information

ND

Combined Synopsis/Solicitation

Line Item Description Qty Unit

0001 Self Generating Nitrogen, Bauer SNG II S/N 179949

BASE YEAR

1 October 2023 – 30 September 2024

1 LOT

0002 REMEDIAL MAINTENANCE 1 LOT

1001 Self Generating Nitrogen, Bauer SNG II S/N 179949

OPTION YEAR 1

1 October 2024 – 30 September 2025

1002 REMEDIAL MAINTENANCE 1 LOT

2001 Self Generating Nitrogen, Bauer SNG II S/N 179949

OPTION YEAR 2

1 October 2025 – 30 September 2026

1 LOT

2002 REMEDIAL MAINTENANCE 1 LOT

3001 Self Generating Nitrogen, Bauer SNG II S/N 179949

OPTION YEAR 3

1 October 2026 – 30 September 2027

1 LOT

3002 REMEDIAL MAINTENANCE 1 LOT

4001 Self Generating Nitrogen, Bauer SNG II S/N 179949

OPTION YEAR 4

1 October 2027 – 30 September 2028

1 LOT

4002 REMEDIAL MAINTENANCE 1 LOT

FAR provision 52.212-1, Instructions to Offerors – Commercial Products and Commercial Services, applies to this acquisition. As prescribed in FAR 12.301(b)(1), the following information is provided in addition to FAR provision 52.212- 1 Addendum found at the end of this Combined Solicitation/Synopsis:

1. The Government intends to award a Firm-Fixed-Price (FFP) contract to satisfy this requirement. This requirement is being solicited as a Request for Quotation (RFQ); submission of a quote does not guarantee receipt of award. Any reference to offers, offerors, or proposals in this acquisition shall be read as quotations, vendors, quoters, or quotes.

2. Questions may be submitted to the points of contact above, no later than the specified date and time. Questions submitted after this date and time may not be answered.

3. Quoters must use Attachment 3 - Pricing Sheet to submit their prices and technical capability. Company information must be included. Quotes in response to this solicitation must be submitted via email to the point of contacts above.

4. For a quote to be eligible for award, the quoter must have a current registration in the System for Award Management (SAM):

https://www.sam.gov, prior to submitting a quote, IAW FAR 4.1102. SAM will be checked to verify the quoter's status before any evaluation is conducted. In accordance with FAR 9.1 prospective quoters must be determined responsible prior to award.

5. FAR provision 52.212-3, Offeror Representations and Certifications -- Commercial Items with alternate I applies to this acquisition. The Offeror shall complete only paragraph (b) of this provision if the Offeror has completed the annual representations and certification electronically in the System for Award Management (SAM) accessed through https://www.sam.gov. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (v) of this provision. Offeror shall identify the applicable paragraphs by completing the fill-ins required per the aforementioned instructions within Attachment 2 – Clauses and Provisions.

Instructions to Quoters

ND

Combined Synopsis/Solicitation

6. Clause at 52.212-4, Contract Terms and Conditions-Commercial Products and Commercial Services, applies to this acquisition. Clause at 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders- Commercial Products and Commercial Services, applies to this acquisition. The additional FAR clauses cited in the clause are identified in Attachment 2 – Clauses and Provisions as applicable to the acquisition.

7. Quoters are required to meet all material solicitation requirements, such as terms and conditions, representations and certifications, deliverables, Performance Work Statement (PWS), etc. Failure to comply with the terms and conditions of the solicitation may result in the Quoter being ineligible for award. Quoters must clearly identify any exception to the solicitation terms and conditions and must provide complete supporting rationale. The Government reserves the right to determine any such exceptions unacceptable, and the quote, therefore, ineligible for award.

8. The terms and processes used in this acquisition are not subject to the definitions nor processes found in FAR subpart 15.3, even if defined or described in FAR part 15. Reference to offers, offerors, or proposals in this acquisition shall be read as quotations, vendors, quoters, or quotes. Any clerical errors in this solicitation, to include the attachments, that use the source selection nomenclature in FAR part 15 shall be read and interpreted in a manner consistent with FAR part 13. Examples of nomenclature found in FAR part 15 include: Request for Proposals (RFP), De-briefing, Discussions, Clarifications, etc. Unless otherwise defined in this solicitation, or in the specific FAR part being referenced, definitions of words retain their definition under FAR 2.101, unless no definition is provided, in which the common dictionary meaning shall be used IAW FAR 1.108(a).

FAR Provision 52.212-2, Evaluation – Commercial Products and Commercial Services, applies to this acquisition. As prescribed in FAR 12.301(c), the following addendum is provided for this solicitation and hereby amends any language therein:

The Government intends to award a Firm-Fixed Price purchase order resulting from this solicitation to the responsible quoter whose quote conforms to the solicitation; is most advantageous to the Government, price and other factors considered; and provides the best value to the Government in accordance with FAR 13.106-1(a)(2)(ii) and FAR 2.101. There is no ranking or assigned importance to evaluation factor IAW FAR 13.106-1(a)(2)(iii). The use of FAR 15.3 and DoD Source Selection Procedures are not applicable to this solicitation, or any award resulting from this solicitation. The following factors shall be used to evaluate quotes: Quality (technical capability) and Price.

Factor 1: QUALITY-TECHNICAL CAPABILITY – The quote will be considered technically acceptable if it meets the specifications in Attachment 1 – Performance Work Statement. Quotations must be submitted with the Attachment 3 – Pricing Sheet completed by the quoter. Quotations that do not meet these requirements will be considered unacceptable and therefore under the evaluation process will not be considered for award. The following ratings will be used in rating Quality (technical capability):

Acceptable: Quote meets the requirements of the solicitation Unacceptable: Quote does not meet the requirements of the solicitation

Factor 2: PRICE

Price will be evaluated as follows:

Completeness:

Upon receipt of quotes, the contracting officer will screen quotes to ensure they are complete, and all required information and pricing are present. This will be done quickly, and in the most minimally burdensome fashion, as determined by the contracting officer.

Price Reasonableness:

The proposed prices will be evaluated for reasonableness. Reasonableness must represent a price to the Government a prudent

Evaluation Criteria

ND

Combined Synopsis/Solicitation person would pay in the conduct of competitive business. Normally, price reasonableness is based on competitive quotations, as outlined in FAR 13.106-3(a)(1), but price reasonableness may also be determined through price analysis techniques, as described in FAR 13.106-3.

Total Evaluated Price:

Only the total evaluated price (TEP) submitted in the quote will be evaluated; this includes the total CLIN pricing for the basic year and all option years listed in listed in Attachment 3 - Pricing Sheet. The total proposed price for all options will be added to the total proposed price for the basic requirement as part of the TEP calculation. TEP will be used for evaluation purposes only.

The Government may determine that a quote is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s).

Attachment 1 – Performance Work Statement Attachment 2 – Clauses and Provisions Attachment 3 – Pricing Sheet Attachment 4 – Wage Determination 2015-4217 Rev 24

Solicitation Attachments