RFQ W912LP-25-Q-1010.pdf
PDF 92 KB Posted
- Attached to
- Tie-Down Chains Federal contract opportunity
- Solicitation number
- W912LP-25-Q-1010
About this file
This is a Request for Quote (RFQ) issued by the Iowa Army National Guard for tie-down chains. The solicitation seeks 960 units of 3/8" X 10' Grade 70 Transport Chain with Clevis Grab Hooks, with specific technical requirements including a chain size of 3/8 inch, yellow zinc chromate finish, carbon steel construction, a 6,600 lbs working load limit, and 26,400 lbs break strength. The procurement is set aside for small businesses under NAICS Code 332618, with a size standard of 500 employees.
Key procurement details include a quote submission deadline of April 2, 2025, at 11:00 a.m. central time, with quotes to be emailed to Dan Collins. Delivery is required by April 30, 2025, to Camp Dodge Joint Maneuver Training Center in Johnston, Iowa. The government intends to award a firm-fixed price purchase order, with price as the basis for award. Contractors must have an active System for Award Management (SAM) registration, submit invoices electronically via Wide Area WorkFlow (WAWF), and complete the Contractor Information Table and Pricing Table with their quote.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Attachment 2 - Contractor Information and Pricing Tables (Amd 01).xlsx | XLSX spreadsheet | |
| RFQ W912LP-25-Q-1010 (Amendment 01).pdf | ||
| Attachment 1 - Provisions and Clauses (Reference and Full-Text).pdf | ||
| Attachment 2 - Contractor Information and Pricing Tables.xlsx | XLSX spreadsheet |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
HEADQUARTERS IOWA NATIONAL GAURD
OFFICE OF THE U.S PROPERTY & FISCAL OFFICER FOR IOWA
Camp Dodge Joint Maneuver Training Center 7105 NW 70th Ave.
Johnston, Iowa 50131-1824
RFQ: W912LP-25-Q-1010
You are invited to submit a quote to the Iowa Army National Guard for tie-down chains with clevis grab hooks.
FAR Clause 52.232-18, “Availability of Funds” applies to this acquisition. Contractor may read the full-text clause in Attachment 1 – Provisions and Clauses. Funds are not presently available for this acquisition.
No purchase order award will be issued until appropriated funds are made available.
Quote is due no later than Wednesday, April 2, 2025, at 11:00 a.m. central time. Quote shall be submitted via email to Dan Collins at daniel.w.collins.civ@army.mil.
All specifications of the tie-down chains with clevis grab hooks shall meet or exceed the salient characteristics (specifications) indicated below. Those specifications which do not meet the minimum salient characteristics shall be identified as a deviation to the requirement, and the technical specifications of the proposed deviation shall be provided in writing as an attachment to the quote.
The following item is required:
LINE ITEM #: 0001
ITEM: 3/8" X 10' Grade 70 Transport Chain with Clevis Grab Hooks QUANTITY / UoM: 960 / Each DELIVERY DATE: Delivery shall be no later than April 30, 2025.
SHIP TO ADDRESS:
Camp Dodge Joint Maneuver Training Center Receiving Desk, Warehouse-12 7105 NW 70th Avenue Johnston, IA 50131-1824.
SALIENT CHARACTERISTICS (specifications):
3/8" X 10' Grade 70 Transport Chain w/ Clevis Grab Hooks
• Chain Size – 3/8 inch.
• Length – minimum of 9 ½ feat, maximum of 10 feet.
• Finish: Yellow Zinc Chromate
• Grade: 70
• Clevis Grab Hook on both ends or chain.
• Shall be made of carbon steel.
• Working load limit: 6,600 lbs.
• Break strength: 26,400 lbs.
The following terms are applicable to this RFQ:
1. NAICS Code 332618, with a small business size standard of 500 employes is applicable to this requirement. This solicitation is set-aside for small business.
2. The Government intends to award a firm-fixed price purchase order and anticipates a single award;
although, reserves the right to make multiple awards if determined to be in the best interest of the Government.
3. Basis for award will be price.
4. Contractor shall have a current, active registration in System for Award Management (SAM) to be eligible for award. Register or check status/expiration date of your registration at http://www.sam.gov. If you are not registered, or if your registration expires within the next 60-days, start the process of updating of your registration now as it may take up to 12-15 business days after you submit before your registration is active in SAM. For registration or renewal instructions, or to check your registration status, see the “Register Your Entity” tile at www.sam.gov.
5. Contractor shall submit invoice(s) electronically via Wide Area WorkFlow (WAWF) application at https://piee.eb.mil and will receive payment via Electronic Funds Transfer (EFT) to the bank account listed in their SAM profile.
6. Contractor shall complete all blocks of Attachment 2 - Contractor Information Table and Pricing Table and provide it with their quote.
In accordance with DEVIATION 2023-O0001:
A small business joint venture offeror must submit, with its offer, the representation required in paragraph
(c) of FAR solicitation provision 52.212-3, Offeror Representations and Certifications- Commercial Products and Commercial Services, and paragraph (c) of FAR solicitation provision 52.219-1, Small Business Program Representations, in accordance with 52.204-8(d) and 52.212-3(b) for the following categories:
(A) Small business;
(B) Service-disabled veteran-owned small business;
(C) Women-owned small business (WOSB) under the WOSB Program;
(D) Economically disadvantaged women-owned small business under the WOSB Program; or
(E) Historically underutilized business zone small business.
Attachments:
Attachment 1 – Provisions and Clause (Reference and Full-Text) Attachment 2 – Contractor Information Table and Pricing Table
File details come from the government source that posted it. Updated .