rfq spec genie lift z62.docx

Engineer Research and Development Center (ERDC) Directorate of Public Works (DPW) Specification for Brand New Articulated Boom Lift Genie Z-62 or Equal 2024 or newer model year

REQUIRMENT:

The ERDC DPW is seeking quotes for brand-new equipment to match the following. The minimum specifications are listed below.

Deliver to DPW, 3909 Halls Ferry Road, Vicksburg, MS 39180 by 01 February 2025. The vendor shall submit with their quote, the latest published specifications and advertising literature. Equipment shall maintain the full manufacturer warranty. Delivery shall be included in the quoted price. All quotes are good for 60 days unless otherwise stated.

Technical and delivery POC:

Tony King 601-415-6607 anthony.m.king@usace.army.mil

TOTAL

The Equipment must meet the following specifications at a minimum:

· Country of Origin: USA

· 4WD

· Zero Tailswing

· Diesel Engine

· Max working height 67ft 11in minimum

· Max platform height 61ft 11in minimum

· Max horizontal reach 40ft 9 in minimum

· Below Grade reach 8ft 1 in minimum

· Max up and over clearance 25ft 7in minimum

· Minimum platform dimensions 2ft 6in x 6 ft

· Maximum stowed height 8ft 4in

· Maximum width 8ft 2in

· Minimum ground clearance 1ft 3in

· Maximum unrestricted lift capacity 500 lb minimum

· Minimum stowed drive speed 3.0 mph

· Built in tilt sensor for safe operation (minimum safe tilt with full operation of 4.5 degrees front to back and side to side)

· 45% rugged terrainability

· Foam filled rough terrain tires

· Minimum 5 ft jib

· AC Power cord to platform

· Lift Tools Work Tray

· Platform load sense system

· Chassis tilt drive function cut-out

· Chassis tilt lift function cut-out

· Hour meter

· Hydraulic oil cooler

*BRAND NAME OR EQUAL

The vendor shall submit with their quote, the latest published specifications and advertising literature on the machine they propose to furnish. If quoting equal product, please provide below information:

Manufacturer’s Name: ______________________, Brand: __________________________

Model or Part Number: _______________________

To be considered for award in accordance with FAR 52.211-6, Brand Name or Equal, offers of “equal” products, including “equal” products of the brand name manufacturer, must—

(1) Meet the salient physical, functional, or performance characteristic specified in this solicitation;

(2) Clearly identify the item by—

(i) Brand name, if any; and

(ii) Make or model number;

(3) Include descriptive literature such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information available to the Contracting Officer; and

(4) Clearly describe any modification the offeror plans to make in a product to make it conform to the solicitation requirements. Mark any descriptive material to clearly show the modification.

(a) The Contracting Officer will evaluate “equal” products on the basis of information furnished by the offeror or identified in the offer and reasonably available to the Contracting Officer. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer.

(b) Unless the offeror clearly indicates in its offer that the product being offered is an “equal” product, the offeror shall provide the brand name product referenced in the solicitation