RFQ Powder Tabletop.pdf
PDF 452 KB Posted
- Attached to
- Tabletop Powder Diffractometer Federal contract opportunity
- Solicitation number
- FA700024QD133
About this file
This document is a Combined Synopsis/Solicitation for a Tabletop Powder Diffractometer issued by the U.S. Air Force Academy under solicitation number FA700024QD133. The government is seeking a commercial item that meets specific technical requirements, including the ability to operate at or above 500°C, analyze powders, use only air cooling, and have Rietveld refinement and residual stress analysis capabilities. The solicitation is using simplified acquisition procedures under FAR Part 13, with award based on best value considering price, technical, and past performance factors. Vendors must submit quotes by August 16, 2024, 10:00 AM Mountain Daylight Time. The government intends to make a single firm-fixed-price award, but reserves the right to conduct interchanges with some or all vendors. The North American Industry Classification System (NAICS) code is 334519 with a size standard of 600 employees, and the Product Service Code is 6630.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Attachment 2 Buy American.pdf | ||
| Atachment 1 Provisions and Clauses FA700024QD133.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
COMBINED SYNOPSIS SOLICITATION
FA700024QD133
U. S. Air Force Academy
Tabletop Powder Diffractometer
This is a combined synopsis/solicitation for commercial items prepared in accordance with (IAW) the format in Federal Acquisition Regulations (FAR) Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued.
This solicitation is issued as a request for quotation (RFQ) in accordance with FAR part 12 and part 13 under solicitation number FA700024QD133. The Request for Quotation (RFQ) number shall be used to reference any written quote provided under this RFQ. The RFQ document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2024-05, effective 22 May 2024, DFARS change, effective 30 May 24, and Department of the Air Force Federal Acquisition Circular (DAFFAC) change, effective 14 June 24.
The associated North American Industry Classification Systems (NAICS) Code is 334519 with a size standard of 600 employees. The Product Service Code (PSC) 6630.
“Notice to Offeror(s)/Supplier(s): Funds are not presently available for this effort. No award will be made under this solicitation until funds are available. The Government reserves the right to cancel this solicitation, either before or after the closing date. In the event the Government cancels this solicitation, the Government has no obligation to reimburse an offeror for any costs.”
The Government bears no legal liability for the costs associated with preparing a quote. Vendors should not submit a quote unless they are willing to absorb all costs associated with submitting a quote.
Before submitting a quote, please read the instructions in the addenda to FAR 52.212-1, Instructions to Offerors - Commercial Items, listed below and comply with all requirements for submitting a quote. Failure to comply with all instructions contained within this synopsis/solicitation could result in the quote being ineligible for award. It is the quoter’s responsibility to ensure their quote meets all the requirements identified herein. Quoters must clearly identify any exception to the solicitation terms and conditions and provide complete accompanying rationale. The quotes will be evaluated IAW FAR 52.212-2, found herein.
I. DESCRIPTION OF REQUIREMENTS
The purpose of this combined synopsis and solicitation is Tabletop Powder Diffractometer.
It is USAFA’s preference/intent to acquire only domestic end products per the Buy American Statute (41 USC Chapter 83), except as provided in FAR 25.103. Foreign offers will be evaluated per DFARS 225.502 when comparing domestic and foreign offers. This requirement is for commercial items; therefore, the manufacturing country of origin will determine if the quoted product is foreign or domestic. The Buy American – Balance of Payments Program Certificate (DFARS 252.225-7000), Attachment 3 –Buy American Certificate, must be completed and submitted with the quote.
All contract line item number (CLIN) are firm fixed price (FFP). The offer schedule and contract CLIN schedule are below.
Item Supplies/Service Quantity Unit Unit Price Total Amount
Tabletop Powder Diffractometer
Each
The Government will not provide IUID labeling.
Delivery Delivery must be F.O.B. Destination to United States Air Force Academy, CO 80840. Any applicable shipping costs must be factored into the unit price(s) of the line item(s). Do not include a separate line item for shipping charges.
FOB Destination (As defined in FAR 2.101—Definitions, the seller or consignor is responsible for the cost of shipping and risk of loss.
Inspection and Acceptance The Government will inspect and accept supplies at the Government’s location, U.S. Air Force Academy, CO 80840. Payment on invoices cannot be made until the Government has accepted the supplies. The contract/purchase order number must be included when shipping.
The Government will not consider any quotes that contain used, reconditioned, refurbished, gray market, or liquidated stock.
II. SOLICITATION INSTRUCTIONS
1. In all instances throughout this solicitation, to include the applicable provisions and clauses, any use of the word "proposal" should be understood as "quote." All instances of the word "offeror" should be understood as "quoter." All instances of the word "award" should be understood as "purchase order."
Quotes supplied in response to this solicitation are not binding. Award of this requirement will be offered to the Quoter IAW 52.212-2, found herein.
2. The provision at FAR 52.212-1, Instructions to Offerors—Commercial Products and Commercial Services (Mar 2023), and the addenda listed below apply to this acquisition.
Addenda to FAR 52.212-1
Submission of offers. FAR 52.212-1 is amended to include the following:
(1) Paragraph (a) first sentence revised as follows: “The NAICS code and small business size standard for this acquisition appear above.”
(2) Paragraph (c) first sentence revised as follows: “The vendor agrees to hold the prices in its quote firm for 60 calendar days from the date specified for receipt of quotes, unless another time period is specified in an addendum to the quote.”
(3) Paragraph (g) Interchanges: The government intends to award a contract without interchanges with respective vendors The government, however, the government reserves the right to conduct interchanges, with all, some, or none of the vendors in its best interest.
(4) Submit signed and dated quotes via e-mail to Ms. Nathalieb Zepeda, nathalieb.zepeda@us.af.mil, and Ms. Susan Davis Ulma, susan.ulma@us.af.mil
Note: zip files are not an acceptable format for the Air Force Network and will not go through our email system.
(5) Quotes must be submitted by 16 August 2024, 10:00 A.M. Mountain Daylight Time.
Late Submissions: Quoters are responsible for submitting quotations so as to reach the Government office designated in the solicitation by the time specified in the solicitation.
Any quotes received at the Government office designated in the solicitation after the exact time specified for receipt of quotations is late and may not be considered unless it is received before award is made and the Contracting Officer determines that accepting the late quotation would not unduly delay the acquisition.
(6) All questions regarding this RFQ must be emailed to Ms. Nathalieb Zepeda, nathalieb.zepeda@us.af.mil, and Ms. Susan Davis Ulma, susan.ulma@us.af.mil no later than 12 August 2024 1:00 PM. Mountain Daylight Time. The questions and answers will be compiled and posted in SAM.gov under the solicitation notice.
(7) The Contracting Officer is not responsible for locating or obtaining any information not identified in the quote. If applicable, provide a written statement that the quote incorporates all amendments to the solicitation.
Quotation preparation instructions
(1) General Instructions. The quoter shall submit their quote to include the following:
solicitation number, contact name, address, e-mail, and telephone number of the offeror, CAGE code, UEI number, size of business, and warranty information.
(2) IAW FAR 12.602(a) when using the simplified acquisition procedures in FAR 13, contracting officers are not required to describe the relative importance of evaluation factors.
(3) The vendor acknowledges that should the quote terms and conditions and/or agreement conflict with mandatory provisions of the Federal Acquisition Regulation (FAR) and other Federal law applicable to commercial acquisitions, to the extent of such conflict the FAR and Federal law govern and conflicting vendor terms and conditions and/or agreement are unenforceable and are not considered incorporated into any resultant contract.
(4) Specific Instructions.
(a) PRICE QUOTATION. Submit the price quote in accordance with the line-item structure listed in the CLIN schedule of this solicitation. Price quotes must be firm-fixed price. Price quotes must include unit prices and extended amounts for each line item (i.e., multiply the unit price and quantity for each line item).
Include the total price (i.e., sum of all extended amounts) in the price quote.
Include delivery terms and schedule, any discounts, and payment terms (e.g., Net
30) with the price quote. The Government will not provide contract financing for this acquisition. Invoice instruction shall be provided at time of award.
(b) TECHNICAL
Minimum salient characteristics, the XRD must:
be capable of operating at or above 500 C.
be capable of analyzing powders use only air cooling (no water or coolant required) be accurate to 0.02 degrees 2*theta have external operating station with software included have scan speed up to 100 degrees / minute provide at least one-time access to the crystallography open database include software that has Rietveld refinement and residual stress capabilities include installation, training, and at least 1 year warranty
DESCRIPTIVE LITERATURE. For the quote to be considered by the Government, must meet the description specified in salient characteristics.
Include any applicable descriptive literature, such as illustrations, specification sheets, or product brochures that clearly identify that the quote meets the Government’s requirements.
Include your best warranty and delivery schedule, as applicable.
(c) PAST PERFORMANCE. The vendor’s exclusions will be checked on sam.gov. In addition, the vendor’s supplier performance risk system (SPRS) will be assessed. Authorized representatives of the Offeror for which the assessment was conducted may access SPRS to view their own summary level scores, in accordance with the SPRS Software User’s Guide for Awardees/Contractors available at https://www.sprs.csd.disa.mil/pdf/SPRS_Awardee.pdf
(d) CONTRACT DOCUMENTATION.
i. Quoters are required to be registered in the System of Award Management
(SAM) (https://www.sam.gov) at the time the quotation is submitted in order to comply with the annual representations and certifications requirements.
Quoters that are not registered in SAM at the time the quotation is submitted will not be considered.
ii. Quotes must include a completed copy of the following provisions that require fill-in text:
FAR 52.212-3 The Offeror shall complete only paragraph (b) of this provision if the Offeror has completed the annual representations and certification electronically in the System for Award Management (SAM) accessed through https://www.sam.gov. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (v) of this provision.
b. The addenda listed below at FAR 52.212-2, Evaluation—Commercial Products and Commercial Services (Nov 2021) applies to this acquisition.
Pursuant to FAR 12.602 contract award will be made using Simplified Acquisition Procedures IAW FAR 13.106. Vendor’s submissions will be evaluated based upon the following:
Addenda to FAR 52.212-2
Basis For Award
This is a competitive acquisition in accordance with FAR part 12 and part 13. The Government will submit an offer in the form of a purchase order to the quoter that represents the best value to the Government. All quotes submitted will be reviewed for completeness.
Quotes that are incomplete or missing information may be considered non- responsive and excluded from the evaluation. The Government will select the awardee that represents the best value based on price, technical, and past performance.
Addenda to FAR 52.212-4
The clause at FAR 52.212-4, Contract Terms and Conditions—Commercial Products and Commercial Services, and the addendum listed below apply to this acquisition.
Text in paragraph (c) is deleted and replaced with the following:
(c) Changes. Changes in terms and conditions of this contract may be made only by written agreement of the parties with the exception of certain changes such as administrative changes including changes in paying office, appropriation data, etc. authorized by the Federal Acquisition Regulation and its supplements that may be made unilaterally by the Contracting Officer, for a complete list of changes that may be made unilaterally, see FAR 43.103(b).
FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders—Commercial Products and Commercial Services (Dec 2023) applies to this acquisition. See provision and clause attachment.
U. S. Air Force Academy
Defense Priorities and Allocations System (DPAS) and assigned rating do not apply to this acquisition.
Attachments to this Solicitation
Attachment 1 – Provisions and Clauses Attachment 2 – Buy American Certificate
File details come from the government source that posted it. Updated .