RFQ No. W912PP21Q0026.pdf

REQUEST FOR QUOTATIONS

(THIS IS NOT AN ORDER) 1

PAGE OF PAGES

1. REQUEST NO. 2. DATE ISSUED RATING

W912PP21Q0026 08-Apr-2021 5a. ISSUED BY

8. TO: NAME AND ADDRESS, INCLUDING ZIP CODE

SEE SCHEDULE

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5a. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this

Request for Quotations must be completed by the quoter.

11. SCHEDULE (Include applicable Federal, State, and local taxes)

ITEM NO.

(a)

SUPPLIES/ SERVICES

(b)

QUANTITY

(c)

UNIT

(d)

UNIT PRICE

(e) (f)

SEE SCHEDULE

AMOUNT

% No. %

NOTE: Additional provisions and representations [ ] are [ ] are not attached.

13. NAME AND ADDRESS OF QUOTER (Street, City, County, State, and ZIP Code)

14. SIGNATURE OF PERSON AUTHORIZED TO

SIGN QUOTATION

15. DATE OF

QUOTATION

16. NAME AND TITLE OF SIGNER (Type or print) (Include area code)

TELEPHONE NO.

AUTHORIZED FOR LOCAL REPRODUCTION STANDARD FORM 18 (REV. 6-95)

PREVIOUS EDITION NOT USABLE Prescribed by GSA FAR (48 CFR) 53.215-1(a)

THIS RFQ X[ ] IS [ ] IS NOT A SMALL BUSINESS SET-ASIDE

6. DELIVER BY (Date)

SEE SCHEDULE

AND/OR DMS REG. 1

UNDER BDSA REG. 2

4. CERT. FOR NAT. DEF.3. REQUISITION/PURCHASE

REQUEST NO.

US ARMY ENGINEER DISTRICT, ALBUQUERQUE

4101 JEFFERSON PLAZA NE

ALBUQUERQUE NM 87109-3435

9. DESTINATION (Consignee and address, including ZIP Code)

7. DELIVERY

[ ]X FOB

DESTINATION

[ ] OTHER

(See Schedule)

22-Apr-2021(Date)

PLEASE FURNISH QUOTATIONS TO THE ISSUING OFFICE IN BLOCK 5a ON OR BEFORE CLOSE OF BUSINESS:10.

505-342-3453FRANCESCA M LUNA

(Name and Telephone no.) (No collect calls)5b. FOR INFORMATION CALL:

d. CALENDAR DAYSc. 30 CALENDAR DAYSb. 20 CALENDAR DAYS12. DISCOUNT FOR PROMPT PAYMENT a. 10 CALENDAR DAYS

W912PP21Q0026

Section B - Supplies or Services and Prices

SUBMISSION INSTRUCTION

Please submit offers to Francesca Luna via e-mail at francesca.m.luna@usace.army.mil.

The Government intends to award a Firm, Fixed-Price service contract, resulting from this solicitation, utilizing Simplified Acquisition Procedures per FAR Part 13.

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 1 Job NDE Testing for Structural Inspections

FFP

The Contractor shall provide all personnel, equipment, supplies, facilities, transportation, tools, materials, supervision, and other items and services necessary to execute NDE structural inspections as defined in the Performance Work Statement and Department of Labor Wage Determination attached hereto.

FOB: Destination

PSC CD: H999

NET AMT

SAM

****************Note to Offeror****************

The System for Award Management (SAM) registration (formerly CCR) should be completed prior to award of any resultant contract from the RFQ. Failure to have this registration completed could cause delay of award or rejection of offer. To complete or update a SAM registration, go to www.sam.gov.

Please provide the following information with quote:

Dun & Bradstreet Number: ______________________ Federal Tax ID Number: ______________________

CAGE Code: ______________________

Section C - Descriptions and Specifications

PWS

PERFORMANCE WORK STATEMENT (PWS)

FY21 Structural Inspections – Nondestructive Evaluation Service Contract

Part 1

General Information

1.0 General: This is a non-personal contract to provide nondestructive evaluation (NDE) services with all personnel, equipment, tools, materials, supervision and other items and services necessary to provide NDE of structural components as described in Part 5 of this document. The Government will not exercise any supervision or control over the contract service providers performing the services herein. Such contract service providers shall be accountable solely to the Contractor who, in turn is responsible to the Government.

1.1 Description of Services/Introduction: The Contractor shall provide all personnel, equipment, supplies, facilities, transportation, tools, materials, supervision, miscellaneous items, and non-personal services necessary to provide NDE of various structural components as defined in Part 5 of this document, except for those items specified as Government furnished property and services.

1.2 Background: NDE services are required to adequately evaluate components of steel bridges and hydraulic steel structures for the USACE Albuquerque District.

1.3 Objectives:

Provide a nondestructive testing technician to perform all NDE. The technician shall be a qualified Level II or Level III inspector per the standards set forth through The American Society of Nondestructive Testing

(ASNT).

NDE evaluation will be at two locations within the USACE Albuquerque District’s area of responsibility. A detailed schedule is provided in Part 5 of this document. The two locations that NDE services are required are at Cochiti Lake, Cochiti, NM, and Trinidad Lake, Trinidad, CO.

The NDE technician will be required to provide various types of evaluation and utilize various methods of testing such as, but is not limited to o Ultrasonic testing (UT) o Liquid penetrant testing (PT) o Electromagnetic testing (ET) o Magnetic particle testing (MT) o Visual testing (VT).

1.4 Scope:

The NDE Contractor shall accompany USACE Personnel during the annual FY21 structural inspections.

All access will be provided by USACE, but the NDE Contractor shall provide all necessary transportation to meet USACE Personnel at the locations and dates specified in Part 5 of this document. The NDE Contractor shall also be compliant with all safety requirements described in Section 1.4.1.

NDE evaluation is required at the following sites and on the following components Cochiti Lake Intake Tower Bridge – (steel truss with pin connections)

- Steel pins within bearing shoes

- Structural welds

Trinidad Lake Service Road Bridge – (steel girder bridge)

- Steel pins within bearing shoes

- Steel pins within hinge connections

Trinidad Lake Intake Tower Bulkhead – (hydraulic steel structure)

- Welds on critical lifting eyes

- Thickness verification

After all inspections have been conducted the NDE Contractor shall submit a report of their findings for approval by USACE. See Part 5 & Part 7 of this document for more information.

1.4.1 Performance Standards and Guideline Requirements: The NDE Contractor shall meet the following requirements:

a) The NDE technician shall be currently trained in accordance with 29 CFR 1910.146 and fall protection.

b) The contractor’s testing equipment shall be calibrated and operational on the day of inspection.

c) The contractor shall provide their own safety equipment appropriate, e.g. hardhat, safety shoes, fall protection harness, etc. Access will be provided by the Government and will include access by means of an under-bridge inspection vehicle.

The government will only pay for services received. The government will not be responsible for inexcusable delays on the behalf of the contractor for reasons such as untimely furnishing of personnel or equipment, underestimating the work force required, and any other contractor caused delays.

1.5 Period of Performance: The period of performance shall be for a total of four (4) calendar days, but only two (2) working days, see Part 5 of this document for detailed schedule. The Period of Performance reads as follows:

14 May 2021 and 17 May 2021 (Anticipated work duration: 8 hours each day)

1.6 General Information:

1.6.1 Security: The Contractor shall have full access to the work area during normal Federal working hours.

1.6.1.1 The contractor shall comply with the stipulations set forth in the Eng. Form 6055 associated with the following content.

2.b: Contractor and all associated sub-contractors employees shall comply with adjudication standards and procedures using the National Crime Information Center Interstate Identification Index (NCIC-III) and Terrorist Screening Database (TSDB) (Army Directive 2014-05 / AR 190-13), applicable installation, facility and area commander installation/facility access and local security policies and procedures (provided by government representative, as NCIC and TSDB are available), or, at OCONUS locations, in accordance with status of forces agreements and other theater regulations.

13: All contract employees, including subcontractor employees who are not in possession of the appropriate security clearance or access privileges, will be escorted in areas where they may be exposed to classified and/or sensitive materials and/or sensitive or restricted areas.

15: The Contractor must pre-screen Candidates using the E-verify Program (http://www.uscis.gov/e-verify) website to meet the established employment eligibility requirements. The Vendor must ensure that the Candidate has two valid forms of Government issued identification prior to enrollment to ensure the correct information is entered into the E verify system. An initial list of verified/eligible Candidates must be provided to the COR no later than 3 business days after the initial contract award." *When contracts are with individuals, the individuals will be required to complete a Form I-9, Employment Eligibility Verification, with the designated Government representative. This Form will be provided to the Contracting Officer and shall become part of the official contract file.

1.6.2 Quality Assurance: The Government shall evaluate the Contractor’s performance under this contract in accordance with the Quality Assurance Surveillance Plan (QASP). This plan is primarily focused on what the Government must do to ensure that the Contractor has performed in accordance with the performance standards. It defines how the performance standards will be applied, the frequency of surveillance, and the minimum satisfactory performance thresholds.

1.6.3 Recognized Holidays: Contractor is not required to perform services on the recognized holidays below.

New Year’s Day Labor Day Martin Luther King Jr.’s Birthday Columbus Day President’s Day Veteran’s Day Memorial Day Thanksgiving Day Independence Day Christmas Day

1.6.4 Hours of Operation: The Contractor is responsible for conducting business between the hours of 7:00am- 5:00pm Monday thru Friday, except Federal holidays, or when the Government facility is closed due to local or national emergencies, administrative closings, or similar Government directed facility closings. The Contractor must at all times maintain an adequate workforce for the uninterrupted performance of all tasks defined within this PWS when the Government facility is not closed for the above reasons. When hiring personnel, the Contractor shall keep in mind that the stability and continuity of the workforce are essential.

1.6.5 Place of Performance: The work to be performed under this contract will be performed at Cochiti Lake, Cochiti, NM and Trinidad Lake, Trinidad, NM.

1.6.6 Type of Contract: The Government will award a firm, fixed-price contract.

1.6.7 Quality Control/Key Control: N/A

1.6.8 Special Qualifications: Contractor shall follow the requirements documented in EM 385-1-1 version 2014.

1.6.9 Post Award Conference/Periodic Progress Meetings: The Contractor agrees to attend any post award conference convened by the contracting activity or contract administration office in accordance with Federal Acquisition Regulation Subpart 42.5. The Contracting Officer, Contracting Officer’s Representative (COR), and other Government personnel, as appropriate, may meet periodically with the Contractor to review the Contractor's performance. At these meetings the Contracting Officer will apprise the Contractor of how the Government views the Contractor's performance and the Contractor will apprise the Government of problems, if any, being experienced. Appropriate action shall be taken to resolve outstanding issues. These meetings shall be at no additional cost to the Government.

1.6.10 Contracting Officer’s Representative (COR): The COR monitors all technical aspects of the contract and assists in contract administration. The COR is authorized to perform the following functions: assure that the Contractor performs the technical requirements of the contract: perform inspections necessary in connection with contract performance: maintain written and oral communications with the Contractor concerning technical aspects of the contract: issue written interpretations of technical requirements, including Government drawings, designs, specifications: monitor Contractor's performance and notifies both the Contracting Officer and Contractor of any deficiencies; coordinate availability of Government furnished property, and provide site entry of Contractor personnel. A letter of designation issued to the COR, a copy of which is sent to the Contractor, states the responsibilities and limitations of the COR, especially with regard to changes in cost or price, estimates or changes in delivery dates. The COR is not authorized to change any of the terms and conditions of the resulting contract.

1.6.11 Key Personnel: The follow personnel are considered key personnel by the Government:

- Adam Baros, E.I.T., USACE, Albuquerque District, Structural Engineer Office: (505) 343-6265 Cell: (505) 252-1404 Adam.R.Baros@usace.army.mil

The Contractor shall provide a Contract Manager who shall be responsible for the performance of the work. The name of this person, and an alternate who shall act for the Contractor when the manager is absent, shall be designated in writing to the Contracting Officer. The Contract Manager, or alternate, shall have full authority to act for the Contractor on all contract matters relating to daily operation of this contract. The Contract Manager, or alternate, shall be available between 7:00a.m. to 5:00p.m., Monday thru Friday, except Federal holidays, or when the Government facility is closed for administrative reasons.

1.6.12 Identification of Contractor Employees: All contract personnel attending meetings, and working in other situations where their Contractor status is not obvious to third parties, are required to identify themselves as such to avoid creating an impression in the minds of members of the public that they are Government officials.

They must also ensure that all documents or reports produced by Contractors are suitably marked as Contractor products or that Contractor participation is appropriately disclosed. Contractor personnel are not required to wear badges in the performance of this service. However, contractor personnel are required to wear high visibility safety vests when operating the rented equipment.

1.6.13 Contractor Travel: Contractor will be required to travel to sites described in Part 5 of this document from Contractor’s place of business. Upon completion of the inspections the contractor will be released from the performance terms of this contract. Contractor will be authorized travel expenses consistent with the substantive provisions of the Joint Travel Regulation (JTR) and the limitation of funds specified in this contract. All travel requires Government approval/authorization and notification to the COR.

1.6.14 Other Direct Costs: Other direct costs include all fuel, per diem and labor for travel between the various inspection locations including lodging for contractor employees for the duration of the contract.

1.6.15 Data Rights: N/A.

PART 2

DEFINITIONS & ACRONYMS

2.0 Definitions and Acronyms:

2.1 Definitions:

2.1.1 Contractor: A supplier or vendor awarded a contract to provide specific supplies or service to the Government. The term used in this contract refers to the prime.

2.1.2 Contracting Officer (KO): A person with authority to enter into, administer, and or terminate contracts, and make related determinations and findings on behalf of the Government. Note: The only individual who can legally bind the Government.

2.1.3 Contracting Officer’s Representative (COR): An employee of the U.S. Government appointed by the Contracting Officer to administer the contract. Such appointment shall be in writing and shall state the scope of authority and limitations. This individual has authority to provide technical direction to the Contractor as long as that direction is within the scope of the contract, does not constitute a change, and has no funding implications. This individual does NOT have authority to change the terms and conditions of the contract.

2.1.4 Defective Service: A service output that does not meet the standard of performance associated with the Performance Work Statement.

2.1.5 Deliverable: Anything that can be physically delivered, but may include non-manufactured things such as meeting minutes or reports.

2.1.6 Key Personnel: Contractor personnel that are evaluated in a source selection process and that may be required to be used in the performance of a contract by the Key Personnel listed in the PWS. When key personnel are used as an evaluation factor in best value procurement, an offer can be rejected if it does not have a firm commitment from the persons that are listed in the proposal.

2.1.7 Physical Security: Actions that prevent the loss or damage of Government property.

2.1.8 Quality Assurance (QA): The Government procedures to verify that services being performed by the Contractor are performed according to acceptable standards.

2.1.9 Quality Assurance Surveillance Plan (QASP): An organized written document specifying the surveillance methodology to be used for surveillance of Contractor performance.

2.1.10 Quality Control (QC): All necessary measures taken by the Contractor to assure that the quality of an end product or service shall meet contract requirements.

2.1.11 Subcontractor: One that enters into a contract with a prime Contractor. The Government does not have privity of contract with the subcontractor.

2.1.12 Work Day: The number of hours per day the Contractor provides services in accordance with the contract.

2.1.13 Work Week: Monday through Friday, unless specified otherwise.

2.2 Acronyms:

ACOR Alternate Contracting Officer's Representative AFARS Army Federal Acquisition Regulation Supplement AR Army Regulation ASNT American Society for Nondestructive Testing

CCE Contracting Center of Excellence CFR Code of Federal Regulations CONUS Continental United States (excludes Alaska and Hawaii) COR Contracting Officer Representative COTR Contracting Officer's Technical Representative COTS Commercial-Off-the-Shelf DA Department of the Army DD250 Department of Defense Form 250 (Receiving Report) DD254 Department of Defense Contract Security Requirement List DFARS Defense Federal Acquisition Regulation Supplement DMDC Defense Manpower Data Center DOD Department of Defense FAR Federal Acquisition Regulation HIPAA Health Insurance Portability and Accountability Act of 1996 HSS Hydraulic Steel Structures KO Contracting Officer OCI Organizational Conflict of Interest OCONUS Outside Continental United States (includes Alaska and Hawaii) ODC Other Direct Costs MT Magnetic Particle Testing NDE Nondestructive evaluation NDT Nondestructive Testing PIPO Phase In/Phase Out POC Point of Contact PRS Performance Requirements Summary PWS Performance Work Statement QA Quality Assurance QAP Quality Assurance Program QASP Quality Assurance Surveillance Plan QC Quality Control QCP Quality Control Program SOW Scope of Work TE Technical Exhibit USACE U.S. Army Corps of Engineers UT Ultrasonic Testing

PART 3

GOVERNMENT FURNISHED PROPERTY, EQUIPMENT, AND SERVICES

3.0 Government Furnished Items and Services: The government will provide inspectors all access to facilitate the inspections including rights of entry, and some inspection equipment essential to conduct the NDE.

The government will not provide any specialized equipment (i.e. NDE equipment), qualified NDE technician, personal protective equipment, or remote power supply for specialized equipment.

3.1 Services: The Government will not provide any services under this contract.

3.2 Facilities: The Government will not provide lodging facilities under this contract. Reasonable accommodations will be provided at inspection sites, such as restrooms.

3.3 Utilities: The Government will not provide the contractor will necessary utilities including, but not limited to, fuel, power, mechanical fluid, or other necessary utilities to execute the services under this contract.

3.4 Equipment: The Government will not provide the contractor will the necessary equipment to fully execute the services under this contract. All equipment including, but not limited to, machinery, personal protective equipment (PPE), or testing equipment shall be contractor furnished.

3.5 Materials: The Government will not provide any materials under this contract.

PART 4

CONTRACTOR FURNISHED ITEMS AND SERVICES

4.0 Contractor Furnished Items and Responsibilities:

4.1 General: The Contractor shall furnish all supplies, equipment, facilities, personnel, and services required to perform work under this contract.

4.2 Materials: None

4.3 Equipment: The Contractor shall furnish all equipment and personnel required to perform work under this contract as described in Part 1 of this Performance Work Statement.

PART 5

SPECIFIC TASKS

5.0 Basic Services:

A qualified NDE technician shall provide services at Cochiti Lake, Cochiti, NM, and Trinidad Lake, Trinidad, CO on the dates and times specified below.

The inspection environment will be from an under-bridge inspection vehicle furnished by the Government, and within a dam intake structure. The under-bridge inspection vehicle will be equipped with a man-basket, operator, and all necessary safety accessories to safely conduct the NDE. The NDE Contractor shall provide their own personal protective equipment, such as, but not limited to, hard hat, safety glasses, reflective vest, steel toes shoes, and fall protection/restraint harness. The inspection within the dam intake structure will be on a flat level surface and possibly an A-frame type ladder, provided by the Government.

All safety equipment described above will be necessary within the dam intake tower.

The NDE technician will arrive at the inspection sites with all necessary equipment to safely conduct the inspection.

5.1 Detailed Inspection Requirements:

The NDE Contractor shall provide a detailed plan for all inspections. The plan shall include the intended method of NDE for each component (i.e. ultrasonic thickness, eddy current, magnetic particle etc.). The NDE Contractor may choose to contact the personnel described in Section 1.6.11 to verify any details not adequately described herein.

Cochiti Lake Intake Tower Bridge:

The inspection will be facilitated from an under-bridge inspection vehicle. NDE will be required on (8)

– pin connections. The pins are approximately 3-inches in diameter and 12-inches long. NDE will also be required as necessary on welded joints, as dictated by USACE Personnel. Inspection is planned to take a full (8) hour day.

Trinidad Lake Service Road Bridge:

The inspection will be facilitated from an under-bridge inspection vehicle. NDE will be required on

(16) – pin connections. The pins are approximately 2-inches in diameter and 12-inches long. NDE will also be required to verify the thickness of steel girders in various locations as necessary and dictated by USACE personnel. The inspection is planned to take a full (8) hour day and will be in conjunction with the inspection below.

Trinidad Lake Intake Tower Bulkhead:

The inspection will be within the intake tower either from a flat level surface or from an A-frame ladder as necessary. NDE is required on two critical lifting connections. The connections are comprised of (2) hoist lugs welded to the top of the bulkhead. The welds and hoist lugs shall be verified through NDE. NDE is also required to verify plate thickness on both side of the bulkhead. The bulkhead is approximately 7-feet wide and 14-feet tall. The inspection is planned in conjunction with the above, Service Road Bridge inspection, and is planned to take a full (8) hour day.

After all inspections have been completed, the NDE Contractor shall provide the Government with a comprehensive report of each inspection. The reports shall include descriptions of components inspected, locations of each component, method of inspection, defects found, supporting photos, inspector’s remarks/comments, inspector’s name and certification number, and any other pertinent data collected during the inspection. The reports shall be submitted to the Government no later than 30 days after the inspection. The reports will be subject to review and comment by the Government, and the NDE Contractor will be required to address any necessary changes. Re-submittal of any reports shall be within 15 days of receiving comments from the Government. Final payment is contingent on submission of final reports.

The inspection schedule is as follows:

Inspection Location Inspection Description Date of Services

Cochiti Lake, Cochiti, NM

Intake tower bridge. 14 May 2021

Trinidad Lake, Trinidad, CO (Service Road Bridge)

Service road bridge. 17 May 2021

Trinidad Lake, Trinidad, CO (Intake Tower)

Bulkhead 17 May 2021

PART 6

APPLICABLE PUBLICATIONS

6.0 Applicable Publications (Current Editions):

6.1 The Contractor must abide by all applicable regulations, publications, manuals, and local policies and procedures of USACE Safety Manual, EM 385 1-1 and 29 CFR 1926.

PART 7

ATTACHMENT/TECHNICAL EXHIBIT LISTING

7.0 Attachment/Technical Exhibit List:

7.1 Technical Exhibit 1 – Performance Requirements Summary

7.2 Technical Exhibit 2 – Deliverables Schedule

7.1 TECHNICAL EXHIBIT 1

Performance Requirements Summary The Contractor service requirements are summarized into performance objectives that relate directly to mission essential items. The performance threshold briefly describes the minimum satisfactory levels of service required for each requirement. These thresholds are critical to mission success.

Performance Objective (The Service required— usually a shall statement)

Standard Performance Threshold

Method of Surveillance

The Contractor shall provide an ASNT NDT Level II or Level III qualified technician.

Provide NDT technician and inspection equipment on time, at the location specified and for the duration requested.

No deviation from the Standard.

100% Inspection

7.2 TECHNICAL EXHIBIT 2

SUBMITTAL SCHEDULE

Deliverable Frequency # of Copies Medium/Format Submit To Certifications for the ASNT NDT Level II or Level III inspector

No later than 10 days before the field inspection, and at the project location at time of inspection.

Email:

Adam.R.Baros@usace .army.mil

USACE,

Albuquerque District

One report for each inspection, as described in Part 5 of this document.

First report submission shall be no later than 30 days after the field inspection. Upon initial submission, the report will be subject to review and comment by the Government, and may need revisions by the contractor. Subsequent submissions, after initial submittal, shall be no later than 15 days after comments have been made by the Government.

1 Microsoft Word and Adobe Acrobat PDF on recordable media, e.g. DVD-R, CD-R or similar. Email delivery is acceptable.

USACE,

Albuquerque District

WAGE DETERMINATION

"REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2015-5443 Daniel W. Simms Division of | Revision No.: 11 Director Wage Determinations| Date Of Last Revision: 12/21/2020 Note: Under Executive Order (EO) 13658 an hourly minimum wage of $10.95 for calendar year 2021 applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1 2015. If this contract is covered by the EO the contractor must pay all workers in any classification listed on this wage determination at least $10.95 per hour (or the applicable wage rate listed on this wage determination if it is higher) for all hours spent performing on the contract in calendar year 2021. The EO minimum wage rate will be adjusted annually.

Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

State: New Mexico

Area: New Mexico Counties of Bernalillo Sandoval Torrance Valencia

**Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations 01011 - Accounting Clerk I 15.02 01012 - Accounting Clerk II 16.87 01013 - Accounting Clerk III 18.88 01020 - Administrative Assistant 29.27 01035 - Court Reporter 27.25 01041 - Customer Service Representative I 12.03 01042 - Customer Service Representative II 13.53 01043 - Customer Service Representative III 14.76 01051 - Data Entry Operator I 12.61 01052 - Data Entry Operator II 13.75 01060 - Dispatcher Motor Vehicle 16.95 01070 - Document Preparation Clerk 15.43 01090 - Duplicating Machine Operator 15.43 01111 - General Clerk I 12.00 01112 - General Clerk II 13.09 01113 - General Clerk III 14.70 01120 - Housing Referral Assistant 18.93 01141 - Messenger Courier 14.03 01191 - Order Clerk I 15.83 01192 - Order Clerk II 17.28 01261 - Personnel Assistant (Employment) I 15.89 01262 - Personnel Assistant (Employment) II 17.78 01263 - Personnel Assistant (Employment) III 19.82

01270 - Production Control Clerk 24.84 01290 - Rental Clerk 13.24 01300 - Scheduler Maintenance 15.18 01311 - Secretary I 15.18 01312 - Secretary II 16.98 01313 - Secretary III 18.93 01320 - Service Order Dispatcher 15.15 01410 - Supply Technician 29.27 01420 - Survey Worker 16.57 01460 - Switchboard Operator/Receptionist 14.32 01531 - Travel Clerk I 15.73 01532 - Travel Clerk II 16.98 01533 - Travel Clerk III 18.06 01611 - Word Processor I 14.89 01612 - Word Processor II 16.72 01613 - Word Processor III 18.71 05000 - Automotive Service Occupations 05005 - Automobile Body Repairer Fiberglass 21.86 05010 - Automotive Electrician 18.99 05040 - Automotive Glass Installer 17.40 05070 - Automotive Worker 17.40 05110 - Mobile Equipment Servicer 14.50 05130 - Motor Equipment Metal Mechanic 20.35 05160 - Motor Equipment Metal Worker 17.40 05190 - Motor Vehicle Mechanic 20.35 05220 - Motor Vehicle Mechanic Helper 13.62 05250 - Motor Vehicle Upholstery Worker 16.00 05280 - Motor Vehicle Wrecker 17.40 05310 - Painter Automotive 18.91 05340 - Radiator Repair Specialist 17.40 05370 - Tire Repairer 13.14 05400 - Transmission Repair Specialist 20.35 07000 - Food Preparation And Service Occupations 07010 - Baker 12.72 07041 - Cook I 11.91 07042 - Cook II 14.36 07070 - Dishwasher 11.15 07130 - Food Service Worker 10.96 07210 - Meat Cutter 16.33 07260 - Waiter/Waitress 9.07 09000 - Furniture Maintenance And Repair Occupations 09010 - Electrostatic Spray Painter 16.31 09040 - Furniture Handler 11.44 09080 - Furniture Refinisher 16.31 09090 - Furniture Refinisher Helper 13.70 09110 - Furniture Repairer Minor 15.24 09130 - Upholsterer 16.31 11000 - General Services And Support Occupations 11030 - Cleaner Vehicles 11.63 11060 - Elevator Operator 11.33 11090 - Gardener 19.73 11122 - Housekeeping Aide 11.33 11150 - Janitor 11.33 11210 - Laborer Grounds Maintenance 13.67 11240 - Maid or Houseman 10.50 11260 - Pruner 11.67 11270 - Tractor Operator 17.68 11330 - Trail Maintenance Worker 13.67 11360 - Window Cleaner 13.28 12000 - Health Occupations 12010 - Ambulance Driver 17.49 12011 - Breath Alcohol Technician 20.92

12012 - Certified Occupational Therapist Assistant 30.64 12015 - Certified Physical Therapist Assistant 28.63 12020 - Dental Assistant 17.73 12025 - Dental Hygienist 42.98 12030 - EKG Technician 27.45 12035 - Electroneurodiagnostic Technologist 27.45 12040 - Emergency Medical Technician 17.49 12071 - Licensed Practical Nurse I 19.36 12072 - Licensed Practical Nurse II 21.66 12073 - Licensed Practical Nurse III 24.14 12100 - Medical Assistant 14.93 12130 - Medical Laboratory Technician 20.85 12160 - Medical Record Clerk 17.15 12190 - Medical Record Technician 19.18 12195 - Medical Transcriptionist 18.43 12210 - Nuclear Medicine Technologist 37.11 12221 - Nursing Assistant I 11.73 12222 - Nursing Assistant II 13.18 12223 - Nursing Assistant III 14.38 12224 - Nursing Assistant IV 16.15 12235 - Optical Dispenser 16.97 12236 - Optical Technician 15.18 12250 - Pharmacy Technician 16.76 12280 - Phlebotomist 14.99 12305 - Radiologic Technologist 28.89 12311 - Registered Nurse I 25.39 12312 - Registered Nurse II 31.06 12313 - Registered Nurse II Specialist 31.06 12314 - Registered Nurse III 37.58 12315 - Registered Nurse III Anesthetist 37.58 12316 - Registered Nurse IV 45.04 12317 - Scheduler (Drug and Alcohol Testing) 26.82 12320 - Substance Abuse Treatment Counselor 25.84 13000 - Information And Arts Occupations 13011 - Exhibits Specialist I 19.40 13012 - Exhibits Specialist II 24.02 13013 - Exhibits Specialist III 29.40 13041 - Illustrator I 16.25 13042 - Illustrator II 20.12 13043 - Illustrator III 24.62 13047 - Librarian 22.91 13050 - Library Aide/Clerk 12.16 13054 - Library Information Technology Systems 20.67 Administrator 13058 - Library Technician 16.37 13061 - Media Specialist I 15.31 13062 - Media Specialist II 17.18 13063 - Media Specialist III 19.07 13071 - Photographer I 15.88 13072 - Photographer II 17.63 13073 - Photographer III 21.70 13074 - Photographer IV 24.30 13075 - Photographer V 29.39 13090 - Technical Order Library Clerk 15.61 13110 - Video Teleconference Technician 18.57 14000 - Information Technology Occupations 14041 - Computer Operator I 15.79 14042 - Computer Operator II 17.67 14043 - Computer Operator III 19.70 14044 - Computer Operator IV 21.89 14045 - Computer Operator V 24.34 14071 - Computer Programmer I (see 1) 24.65

14072 - Computer Programmer II (see 1) 14073 - Computer Programmer III (see 1) 14074 - Computer Programmer IV (see 1) 14101 - Computer Systems Analyst I (see 1) 14102 - Computer Systems Analyst II (see 1) 14103 - Computer Systems Analyst III (see 1) 14150 - Peripheral Equipment Operator 15.79 14160 - Personal Computer Support Technician 21.89 14170 - System Support Specialist 26.43 15000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (Non-Rated) 27.62 15020 - Aircrew Training Devices Instructor (Rated) 33.39 15030 - Air Crew Training Devices Instructor (Pilot) 40.05 15050 - Computer Based Training Specialist / Instructor 27.62 15060 - Educational Technologist 28.76 15070 - Flight Instructor (Pilot) 40.05 15080 - Graphic Artist 22.41 15085 - Maintenance Test Pilot Fixed Jet/Prop 38.97 15086 - Maintenance Test Pilot Rotary Wing 38.97 15088 - Non-Maintenance Test/Co-Pilot 38.97 15090 - Technical Instructor 21.76 15095 - Technical Instructor/Course Developer 26.63 15110 - Test Proctor 17.58 15120 - Tutor 17.58 16000 - Laundry Dry-Cleaning Pressing And Related Occupations 16010 - Assembler 10.66 16030 - Counter Attendant 10.66 16040 - Dry Cleaner 12.17 16070 - Finisher Flatwork Machine 10.66 16090 - Presser Hand 10.66 16110 - Presser Machine Drycleaning 10.66 16130 - Presser Machine Shirts 10.66 16160 - Presser Machine Wearing Apparel Laundry 10.66 16190 - Sewing Machine Operator 12.71 16220 - Tailor 13.36 16250 - Washer Machine 11.16 19000 - Machine Tool Operation And Repair Occupations 19010 - Machine-Tool Operator (Tool Room) 23.63 19040 - Tool And Die Maker 30.23 21000 - Materials Handling And Packing Occupations 21020 - Forklift Operator 20.51 21030 - Material Coordinator 24.84 21040 - Material Expediter 24.84 21050 - Material Handling Laborer 12.79 21071 - Order Filler 13.77 21080 - Production Line Worker (Food Processing) 20.51 21110 - Shipping Packer 15.44 21130 - Shipping/Receiving Clerk 15.44 21140 - Store Worker I 9.70 21150 - Stock Clerk 15.69 21210 - Tools And Parts Attendant 20.51 21410 - Warehouse Specialist 20.51 23000 - Mechanics And Maintenance And Repair Occupations 23010 - Aerospace Structural Welder 31.07 23019 - Aircraft Logs and Records Technician 22.72 23021 - Aircraft Mechanic I 29.09 23022 - Aircraft Mechanic II 31.07 23023 - Aircraft Mechanic III 32.75 23040 - Aircraft Mechanic Helper 18.46 23050 - Aircraft Painter 26.96 23060 - Aircraft Servicer 22.72 23070 - Aircraft Survival Flight Equipment Technician 26.96

23080 - Aircraft Worker 24.84 23091 - Aircrew Life Support Equipment (ALSE) Mechanic 24.84 I 23092 - Aircrew Life Support Equipment (ALSE) Mechanic 29.09

II

23110 - Appliance Mechanic 19.51 23120 - Bicycle Repairer 14.55 23125 - Cable Splicer 31.72 23130 - Carpenter Maintenance 18.76 23140 - Carpet Layer 21.77 23160 - Electrician Maintenance 22.63 23181 - Electronics Technician Maintenance I 25.16 23182 - Electronics Technician Maintenance II 27.32 23183 - Electronics Technician Maintenance III 29.47 23260 - Fabric Worker 19.91 23290 - Fire Alarm System Mechanic 20.64 23310 - Fire Extinguisher Repairer 18.05 23311 - Fuel Distribution System Mechanic 28.08 23312 - Fuel Distribution System Operator 21.03 23370 - General Maintenance Worker 16.79 23380 - Ground Support Equipment Mechanic 29.09 23381 - Ground Support Equipment Servicer 22.72 23382 - Ground Support Equipment Worker 24.84 23391 - Gunsmith I 18.05 23392 - Gunsmith II 21.77 23393 - Gunsmith III 25.50 23410 - Heating Ventilation And Air-Conditioning 22.99 Mechanic 23411 - Heating Ventilation And Air Contidioning 24.56 Mechanic (Research Facility) 23430 - Heavy Equipment Mechanic 25.01 23440 - Heavy Equipment Operator 19.64 23460 - Instrument Mechanic 32.55 23465 - Laboratory/Shelter Mechanic 23.63 23470 - Laborer 12.79 23510 - Locksmith 20.13 23530 - Machinery Maintenance Mechanic 23.93 23550 - Machinist Maintenance 22.76 23580 - Maintenance Trades Helper 13.82 23591 - Metrology Technician I 32.55 23592 - Metrology Technician II 34.77 23593 - Metrology Technician III 36.65 23640 - Millwright 29.44 23710 - Office Appliance Repairer 19.21 23760 - Painter Maintenance 17.49 23790 - Pipefitter Maintenance 23.77 23810 - Plumber Maintenance 22.03 23820 - Pneudraulic Systems Mechanic 25.50 23850 - Rigger 26.05 23870 - Scale Mechanic 21.77 23890 - Sheet-Metal Worker Maintenance 23.25 23910 - Small Engine Mechanic 17.52 23931 - Telecommunications Mechanic I 26.47 23932 - Telecommunications Mechanic II 28.27 23950 - Telephone Lineman 25.50 23960 - Welder Combination Maintenance 20.13 23965 - Well Driller 26.05 23970 - Woodcraft Worker 25.50 23980 - Woodworker 18.05 24000 - Personal Needs Occupations 24550 - Case Manager 17.26 24570 - Child Care Attendant 10.88

24580 - Child Care Center Clerk 14.77 24610 - Chore Aide 10.72 24620 - Family Readiness And Support Services 17.26 Coordinator 24630 - Homemaker 17.49 25000 - Plant And System Operations Occupations 25010 - Boiler Tender 26.32 25040 - Sewage Plant Operator 21.00 25070 - Stationary Engineer 26.32 25190 - Ventilation Equipment Tender 16.70 25210 - Water Treatment Plant Operator 21.00 27000 - Protective Service Occupations 27004 - Alarm Monitor 20.09 27007 - Baggage Inspector 12.44 27008 - Corrections Officer 18.46 27010 - Court Security Officer 18.91 27030 - Detection Dog Handler 13.92 27040 - Detention Officer 18.46 27070 - Firefighter 19.35 27101 - Guard I 12.44 27102 - Guard II 13.92 27131 - Police Officer I 24.71 27132 - Police Officer II 27.45 28000 - Recreation Occupations 28041 - Carnival Equipment Operator 15.76 28042 - Carnival Equipment Repairer 17.59 28043 - Carnival Worker 10.41 28210 - Gate Attendant/Gate Tender 13.59 28310 - Lifeguard 11.34 28350 - Park Attendant (Aide) 15.21 28510 - Recreation Aide/Health Facility Attendant 11.10 28515 - Recreation Specialist 18.06 28630 - Sports Official 12.11 28690 - Swimming Pool Operator 21.21 29000 - Stevedoring/Longshoremen Occupational Services 29010 - Blocker And Bracer 21.77 29020 - Hatch Tender 21.77 29030 - Line Handler 21.77 29041 - Stevedore I 19.91 29042 - Stevedore II 23.63 30000 - Technical Occupations 30010 - Air Traffic Control Specialist Center (HFO) (see 2) 40.14 30011 - Air Traffic Control Specialist Station (HFO) (see 2) 27.68 30012 - Air Traffic Control Specialist Terminal (HFO) (see 2) 30.48 30021 - Archeological Technician I 17.39 30022 - Archeological Technician II 19.50 30023 - Archeological Technician III 23.87 30030 - Cartographic Technician 24.17 30040 - Civil Engineering Technician 24.00 30051 - Cryogenic Technician I 25.52 30052 - Cryogenic Technician II 28.18 30061 - Drafter/CAD Operator I 17.39 30062 - Drafter/CAD Operator II 19.50 30063 - Drafter/CAD Operator III 21.75 30064 - Drafter/CAD Operator IV 25.91 30081 - Engineering Technician I 16.06 30082 - Engineering Technician II 18.04 30083 - Engineering Technician III 20.18 30084 - Engineering Technician IV 24.99 30085 - Engineering Technician V 30.57 30086 - Engineering Technician VI 36.98 30090 - Environmental Technician 23.34

30095 - Evidence Control Specialist 23.03 30210 - Laboratory Technician 24.14 30221 - Latent Fingerprint Technician I 22.62 30222 - Latent Fingerprint Technician II 24.98 30240 - Mathematical Technician 24.17 30361 - Paralegal/Legal Assistant I 17.92 30362 - Paralegal/Legal Assistant II 22.19 30363 - Paralegal/Legal Assistant III 27.15 30364 - Paralegal/Legal Assistant IV 32.84 30375 - Petroleum Supply Specialist 28.18 30390 - Photo-Optics Technician 24.17 30395 - Radiation Control Technician 28.18 30461 - Technical Writer I 23.29 30462 - Technical Writer II 28.49 30463 - Technical Writer III 34.46 30491 - Unexploded Ordnance (UXO) Technician I 25.51 30492 - Unexploded Ordnance (UXO) Technician II 30.86 30493 - Unexploded Ordnance (UXO) Technician III 36.99 30494 - Unexploded (UXO) Safety Escort 25.51 30495 - Unexploded (UXO) Sweep Personnel 25.51 30501 - Weather Forecaster I 25.91 30502 - Weather Forecaster II 31.51 30620 - Weather Observer Combined Upper Air Or (see 2) 21.75 Surface Programs 30621 - Weather Observer Senior (see 2) 24.17 31000 - Transportation/Mobile Equipment Operation Occupations 31010 - Airplane Pilot 30.86 31020 - Bus Aide 10.73 31030 - Bus Driver 17.17 31043 - Driver Courier 14.38 31260 - Parking and Lot Attendant 11.09 31290 - Shuttle Bus Driver 16.05 31310 - Taxi Driver 12.68 31361 - Truckdriver Light 16.05 31362 - Truckdriver Medium 17.70 31363 - Truckdriver Heavy 20.15 31364 - Truckdriver Tractor-Trailer 20.15 99000 - Miscellaneous Occupations 99020 - Cabin Safety Specialist 15.05 99030 - Cashier 10.76 99050 - Desk Clerk 10.96 99095 - Embalmer 25.51 99130 - Flight Follower 25.51 99251 - Laboratory Animal Caretaker I 13.30 99252 - Laboratory Animal Caretaker II 14.84 99260 - Marketing Analyst 26.40 99310 - Mortician 25.51 99410 - Pest Controller 20.01 99510 - Photofinishing Worker 13.40 99710 - Recycling Laborer 19.37 99711 - Recycling Specialist 25.07 99730 - Refuse Collector 17.14 99810 - Sales Clerk 11.98 99820 - School Crossing Guard 13.63 99830 - Survey Party Chief 23.72 99831 - Surveying Aide 21.57 99832 - Surveying Technician 21.76 99840 - Vending Machine Attendant 13.02 99841 - Vending Machine Repairer 17.53 99842 - Vending Machine Repairer Helper 13.02

Note: Executive Order (EO) 13706 Establishing Paid Sick Leave for Federal Contractors applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1 2017. If this contract is covered by the EO the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work up to 56 hours of paid sick leave each year. Employees must be permitted to use paid sick leave for their own illness injury or other health-related needs including preventive care; to assist a family member (or person who is like family to the employee) who is ill injured or has other health-related needs including preventive care; or for reasons resulting from or to assist a family member (or person who is like family to the employee) who is the victim of domestic violence sexual assault or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: $4.54 per hour up to 40 hours per week or $181.60 per week or $786.93 per month

HEALTH & WELFARE EO 13706: $4.22 per hour up to 40 hours per week or $168.80 per week or $731.47 per month*

*This rate is to be used only when compensating employees for performance on an SCA-covered contract also covered by EO 13706 Establishing Paid Sick Leave for Federal Contractors. A contractor may not receive credit toward its SCA obligations for any paid sick leave provided pursuant to EO 13706.

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor 3 weeks after 10 years and 4 weeks after 15 years. Length of service includes the whole span of continuous service with the present contractor or successor wherever employed and with the predecessor contractors in the performance of similar work at the same Federal facility. (See 29 CFR 4.173)

HOLIDAYS: A minimum of ten paid holidays per year: New Year's Day Martin Luther King Jr.'s Birthday Washington's Birthday Memorial Day Independence Day Labor Day Columbus Day Veterans' Day Thanksgiving Day and Christmas Day. (A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.) (See 29 CFR 4.174)

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE FOLLOWING:

1) COMPUTER EMPLOYEES: Under the SCA at section 8(b) this wage determination does not apply to any employee who individually qualifies as a bona fide executive administrative or professional employee as defined in 29 C.F.R. Part 541. Because most Computer System Analysts and Computer Programmers who are compensated at a rate not less than $27.63 (or on a salary or fee basis at a rate not less than $455 per week) an hour would likely qualify as exempt computer professionals (29 C.F.R. 541.

400) wage rates may not be listed on this wage determination for all occupations within those job families. In addition because this wage determination may not list a wage rate for some or all occupations within those job families if the survey data indicates that the prevailing wage rate for the occupation equals or exceeds $27.63 per hour conformances may be necessary for certain nonexempt employees. For example if an individual employee is nonexempt but nevertheless performs duties within the scope of one of the Computer Systems Analyst or Computer Programmer occupations for which this wage determination does not specify an SCA wage rate then the wage rate for that employee must be conformed in accordance with the conformance procedures described in the conformance note included on this wage determination.

Additionally because job titles vary widely and change quickly in the computer industry job titles are not determinative of the application of the computer professional exemption. Therefore the exemption applies only to computer employees who satisfy the compensation requirements and whose primary duty consists of:

(1) The application of systems analysis techniques and procedures including consulting with users to determine hardware software or system functional specifications;

(2) The design development documentation analysis creation testing or modification of computer systems or programs including prototypes based on and related to user or system design specifications;

(3) The design documentation testing creation or modification of computer programs related to machine operating systems; or

(4) A combination of the aforementioned duties the performance of which requires the same level of skills. (29 C.F.R. 541.400).

2) AIR TRAFFIC CONTROLLERS AND WEATHER OBSERVERS - NIGHT PAY & SUNDAY PAY: If you work at night as part of a regular tour of duty you will earn a night differential and receive an additional 10% of basic pay for any hours worked between 6pm and 6am.

If you are a full-time employed (40 hours a week) and Sunday is part of your regularly scheduled workweek you are paid at your rate of basic pay plus a Sunday premium of 25% of your basic rate for each hour of Sunday work which is not overtime (i.e. occasional work on Sunday outside the normal tour of duty is considered overtime work).

** HAZARDOUS PAY DIFFERENTIAL **

An 8 percent differential is applicable to employees employed in a position that represents a high degree of hazard when working with or in close proximity to ordnance explosives and incendiary materials. This includes work such as screening blending dying mixing and pressing of sensitive ordnance explosives and pyrotechnic compositions such as lead azide black powder and photoflash powder.

All dry-house activities involving propellants or explosives. Demilitarization modification renovation demolition and maintenance operations on sensitive ordnance explosives and incendiary materials. All operations involving re-grading and cleaning of artillery ranges.

A 4 percent differential is applicable to employees employed in a position that represents a low degree of hazard when working with or in close proximity to ordnance (or employees possibly adjacent to) explosives and incendiary materials which involves potential injury such as laceration of hands face or arms of the employee engaged in the operation irritation of the skin minor burns and the like;

minimal damage to immediate or adjacent work area or equipment being used. All operations involving unloading storage and hauling of ordnance explosive and incendiary ordnance material other than small arms ammunition. These differentials are only applicable to work that has been specifically designated by the agency for ordnance explosives and incendiary material differential pay.

** UNIFORM ALLOWANCE **

If employees are required to wear uniforms in the performance of this contract (either by the terms of the Government…