RFQ N6852024R0022.pdf

SEE ADDENDUM

(No Collect Calls)

N6852024R0022 09-Feb-2024

b. TELEPHONE NUMBER 8. OFFER DUE DATE/LOCAL TIME

12:00 PM 23 Feb 2024

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

N685209. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

PATRICK D GLYNN

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

0 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

1301121387

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED ORX

SMALL BUSINESS

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

COMFRC PROCUREMENT GROUP

47038 MCLEOD ROAD; BUILDING 448

PATUXENT RIVER MD 20670

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE 16. ADMINISTERED BY

SEE SCHEDULE

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

FAX:

TEL: SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

1,200

NAICS:

334517

X

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF48

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

N6852024R0022

Section SF 1449 - CONTINUATION SHEET

STATEMENT OF WORK (SOW)

1. SCOPE: Fleet Readiness Center South East (FRCSE) requires a Computed Tomography (CT) system. This new capability is necessary to support the inspection of flight components and future additive manufacturing (AM) fabricated aircraft parts and components at the FRCSE maintenance facility onboard Naval Air Station (NAS) Jacksonville in Florida. The required system shall be a complete, installed turnkey CT system as a shielded cabinet X-ray with ionizing radiation of 225 kV (kilovolt) and 450 kV potentials and have capabilities of advanced 2-D radiographic inspection, 2-D CT slice reconstruction, CT volume reconstruction for complete 3-D inspection, 3-D internal and external surface scanning, and complete tools for precision measurement and analysis. Upon completion of the upgrade, the contractor shall provide on-site training and phone support for Government Nondestructive Inspection (NDI) engineers.

2. APPLICABLE DOCUMENTS: All work performed by the contractor shall be accomplished in accordance with applicable original equipment manufacturer (OEM) of the provided equipment publications, technical directives, instructions, standards and procedures contained in pertinent manuals, utilizing blueprints, drawings or schematics.

2.1. “Attachment 1” – CT System Area Layout

2.2. “FRCSE Work Restrictions” – Base Restrictions and Contractor Access information

2.3. Code of Federal Regulations (CFR) Title 21-1020.40

2.4. ASTM E2737

3. REQUIREMENTS: The contractor shall provide and install the CT system complete in the designated space as shown on Attachment 1. It is the responsibility of the contractor to get the entire unit or assembled components to the prescribed space and meet all requirements as set below as a complete system.

3.1. System Capabilities: System shall be capable of all functions described below

3.1.1. Advanced 2-D X-ray inspection

3.1.2. 2-D CT slice reconstruction

3.1.3. CT volume reconstruction for 3-D inspection

3.1.4. 3-D internal and external surface scanning

3.1.5. Measurement and analysis tools

3.2. Designated Location: Designated location is in NAS-Jacksonville, B793, Materials Lab in the southeast corner of the NDI area as illustrated in Attachment 1.

3.3. Radiation Shielded Cabinet: Enclosure shall meet or exceed 21CFR 1020.40

3.3.1. Shielding Location and Performance

3.3.1.1. Radiation leakage shall not exceed 0.5 mr/hr (milliroentgen per hour) at any point 2 inches away from the outer surface of the enclosure. This applies to all enclosure outer surfaces.

3.3.1.2. Primary radiation shielding shall be capable of reducing energy of maximum kVp (Kilovolt Potential) constant potential attainable by system to leakage requirement in Section 3.3.1.1 or below for all surfaces capable of being exposed to the primary beam.

3.3.1.3. Secondary shielding for all other surfaces shall be capable of reducing back scatter and stray radiation to the leakage requirement in Section 3.3.1.1 under any operating conditions.

3.3.2. The supplied equipment and all ancillary items required to meet the requirements set in this document shall fit in the space prescribed in Attachment 1 and meet the following requirements:

3.3.2.1. Equipment shall be fully operational with all capability unimpeded.

3.3.2.2. Equipment shall be fully functional including:

3.3.2.2.1. All operations/functions shall be accessible and within reach of equipment operator without shifting from an initial position or having to bend or twist awkwardly.

3.3.2.2.2. Access shall not be restricted to any point below operational envelope/capability.

3.3.2.3. Equipment shall be fully maintainable. All maintenance points specified in the OEM

Maintenance Manual as specified in Section 3.12.1.2 below shall be accessible without safety hazards including, but not limited to pinch points, sharp edges, falls from height (greater than 4 feet), or clearances that create interference for the hand and/or tools/equipment required to perform the maintenance.

3.3.3. Equipment provided shall include interlocked baffles for cable access to working envelope/radiation space.

3.3.3.1. Equipment shall include as many baffles as necessary for full function without swapping cables.

3.3.3.2. Supplied baffles shall have minimum dimensions of 6” x 12”.

3.3.4. Equipment provided shall be equipped with an automated door to work space

3.3.4.1. Portal shall be fully accessible with and capable of handling a part the full size and weight of the work envelope/table/space provided.

3.3.4.2. Doors shall be equipped with primary and secondary safety interlocks with all supplied X-ray generation equipment.

3.3.5. Equipment shall be supplied with a warning lamp indicating x-rays are being generated.

3.3.5.1. Warning lamp shall illuminate when X-ray generation is initiated and remain on until X-rays have stopped.

3.3.5.2. Warning lamp shall include backlit lettering ‘X-RAY ON’.

3.3.5.3. Warning lamp shall be ‘fail-safe’ and not allow X-ray generation if the bulb is not illuminated for any reason.

3.3.6. Equipment shall include surveillance cameras.

3.3.6.1. Cameras shall be provided in sufficient number at field of view and resolution to observe process and diagnose any issues with operation of the unit.

3.4. Object Placement and Control

3.4.1. A flat, level surface shall be provided for placement of object to be inspected. Surface shall be provided with sufficient details to hold part fixtures securely in place during inspection – some examples would be tee slots or holes. These details shall be sub-flush to flat, level surface provided

– no permanent or semi-permanent detail shall be proud of the surface.

3.4.2. For purposes of describing motion control, components in this section shall be referred to as the ‘Part’ in the remainder of this document.

3.5. Motion Control

3.5.1. All motion control axes shall be independent and capable of variable speed.

3.5.1.1. The inspection envelope is defined as the volume required to physically fit a part for 2-D inspection. The inspection envelope of the supplied equipment shall have the following MINIMUM dimensions:

3.5.1.1.3. 30 inches diameter.

3.5.1.1.4. 30 inches in height.

3.5.1.1.5. 100 pounds weight.

3.5.1.2. The scan envelope is defined as the volume required to perform a complete CT scan. The scan envelope of the supplied equipment shall have the following MINIMUM dimensions:

3.5.1.2.6. 20 inches diameter.

3.5.1.2.7. 26 inches in height.

3.5.1.2.8. 100 pounds weight.

3.5.1.3. All motion axes shall have resolution as described below:

3.5.1.3.9. 0.001 inches for translational axes.

3.5.1.3.10. 0.001 degrees for rotational axes.

3.5.2. Devices Included in Motion Control

3.5.2.1. For purposes of describing motion control, components listed in this section shall be referred to as ‘Device’ or ‘Devices’ in the remainder of this document.

3.5.2.1.11. Digital Detector Array (DDA) as described in Section 3.7 below.

3.5.2.1.12. 225 kV open microfocus ionizing tube as described in Section 4.6.1 below.

3.5.2.1.13. 450 kV X-ray ionizing tube as described in Section 3.6.2 below.

3.5.3. Part Views

3.5.3.1. The base view shall be with the surface provided as described in Section 3.4 above parallel to the ground/floor. The part shall be capable of being viewed continuously through revolutions of 360 degrees about a vertical axis through the center of the part envelope.

3.5.3.2. The base view shall be able to be tilted on an axis transverse to the X-ray/detection path a minimum of 20 degrees in either direction. This view shall not inhibit the function in the base view in any way.

3.5.4. Motion Limits

3.5.4.1. Motion shall be provided to the devices, the part, or both meet the following requirements at a minimum:

3.5.4.1.14. Acquire an image of the edge/limit/boundary of a part that maximizes the envelope as described in Section 3.5.1.1 above. The system shall be capable of displaying the image of the edge/limit/boundary of the part with at least 1 inch visible outside/beyond the edge/limit/boundary in the field of view at all possible settings and combinations of settings as described below:

3.5.4.1.14.1. Tube settings

3.5.4.1.14.2. Distance from source to part

3.5.4.1.14.3. Distance from source to detector

3.5.4.1.14.3.1. In addition to axis/axes required to adjust distance from source to detector, system shall have capability of translating the detector transverse to the source-to-detector path in both horizontal and vertical directions with sufficient range to adjust effective pixel-pitch during image acquisition (Sub-Pixel).X-Ray Generation

3.5.5. 225 kV Open microfocus ionizing tube

3.5.5.1. Tube voltage 225 kV min

3.5.5.1.15. Max Power 350 W

3.5.5.2. Detail Recognition <4 microns

3.5.5.3. Min Focus-Object-Distance <6 mm

3.5.5.4. Closed Loop Liquid Cooling 100% duty cycle at 100% power

3.5.5.5. Oil-free vacuum system

3.5.5.6. High Tension Cable Length to support safety/100% motion

3.5.5.7. Complete Control Unit

3.5.5.7.16. Automatic tube warm-up routine including high voltage, filament current

3.5.5.7.17. Automatic focus, electron beam alignment, and target loading control

3.5.5.8. High Energy Copper Filter Kit

3.5.5.8.18. 0.125 inch

3.5.5.8.19. 0.250 inch

3.5.5.8.20. 0.500 inch

3.5.6. 450 kV x-ray ionizing tube

3.5.6.1. Tube voltage 450 kV min

3.5.6.1.21. 1800 W high stability generator

3.5.6.1.22. 5mm Be window

3.5.6.1.23. Target angle 11 degrees

3.5.6.1.24. Radiation coverage 40 degrees x 30 degrees

3.5.6.2. Multi focal spots

3.5.6.2.25. 50 microns – 50 W

3.5.6.2.26. 100 microns – 100 W

3.5.6.2.27. 250 microns – 250 W

3.5.6.2.28. 350 microns – 350 W

3.5.6.2.29. 450 microns – 450 W

3.5.6.3. Digital Controller with the following modes:

3.5.6.3.30. Warm up

3.5.6.3.31. Radiographic

3.5.6.3.32. Fluoroscopic or ‘Live-Mode’

3.5.6.3.33. Auto Watt

3.5.6.3.34. Manual

3.5.6.4. High tension cables of sufficient length to support full function safely

3.5.6.5. Oil-to-air cooling system to include the following interlocks:

3.5.6.5.35. Fluid flow

3.5.6.5.36. Working Fluid Temperature

3.5.7. Automated collimator

3.5.8. Automated shutter

3.5.8.1. 4-leaf

3.5.8.2. 2-axis

3.6. Digital Detector Array (DDA)

3.6.1. DDA shall be delivered with objective evidence that it meets or exceeds all qualifications for ASTM

E2597 with the following specifications:

3.6.1.1. Pixel Pitch 139 micron

3.6.1.2. Array size 3072 x 3072 pixel

3.6.1.3. Dynamic range 16-bit (65,536 level grey scale)

3.6.1.4. Acquisition speed of 6 frames per second (fps) at full resolution

3.6.1.5. Detector size 16.8 inches x 16.8 inches

3.6.1.6. Shielded housing capable of protecting the DDA from energy when the unit is run to full power

3.7. Workstation – A workstation shall be provided that fits in the prescribed area as indicated in Attachment 1.

It shall fit conveniently in the space complete with all peripheral hardware described below as a minimum:

3.7.1. Ergonomic control console

3.7.1.1. Human-Machine Interface (HMI)

3.7.1.2. Display

3.7.1.2.37. Monitor or monitors sufficient size to perform all operations equipment is capable of

3.7.1.2.37.4. Minimum nominal size 32 inches

3.7.1.2.37.5. Minimum contrast ratio 1300:1

3.7.1.2.37.6. Maximum pixel pitch shall be 0.1845mm

3.7.1.2.37.7. Display minimum of 256 shades of grey

3.7.1.2.38. Reconstruction system including any additional hardware that is required to acquire, view, and process images created by the system.

3.7.1.2.38.8. Processing System Requirements. Industrial Controller. The contractor shall provide an industrial Controller or Personnel Computer (PC). If a PC is provided,.

its sole purpose must be to control the machine and display system output and meet all of the requirements set forth in this document. The case shall be of a size that is capable of containing all of the hardware necessary to support the complete function of the machine. In addition, the case shall have adequate ventilation with filtered intake. Intake filter shall be replaceable by operating personnel with either no tools or basic hand tools. An electronic rack mounted PC is acceptable as long as the Controller and the rack have adequate ventilation capable of supporting running of the unit at full power for 100% duty cycle. Controller and all components including any processors supplied shall be of current manufacture and supported by the OEM with no known date of obsolescence published at the time of contract award. The Controller shall be equipped with the latest operating system (OS) provided by the developer of the Controller or third party that develops operating systems. The Controller shall be provided with the equipment and ready to run with all required software loaded onto it. All applications and/or software required for the use of the machine shall be provided loaded and tested on the Controller and provided separately on appropriate media complete with instructions to be loaded by DoD IT personnel in the event that the unit should fail or need to be updated. All testing of the performance of the software shall be performed during the Required Testing portion of the installation as prescribed in Section 4 below.

3.7.1.2.38.9. Operating System shall be Microsoft Windows 11 capable of running all operation, reconstruction, measurement, and reporting software for complete function of the system

3.7.1.2.38.9.2. Software Support. All proprietary software required for the complete functioning of the machine shall be provided. Software shall be provided with a license for the government to install and delete on at least the number of machines covered by this contract. The contractor shall disclose a price at the time of proposal for additional copies/licenses for the software in the event it would be to the advantage of the government to utilize the software on PC’s other than the ones that are dedicated to running the machine.

Support shall include updates and troubleshooting support. Updates shall be provided at any time that they are made available. The government shall be supplied with any updates by the time they are offered on the open market at the latest. If no software updates are issued within a calendar year, the contractor shall issue a letter on its company letter head addressed to the TPOC to serve as proof that the software is up to date. Support can include online support and/or telephone support during normal working hours. Support shall be sufficient for government IT professionals to troubleshoot and resolve any issues that may arise due to software performance or conflicts. Other services that are not covered in this section shall be made available as an option to the government. Prices for these additional services shall be disclosed at the time of proposal.

3.7.1.2.38.10. Processor shall be of manufacture by the company that was originally founded and formerly known as Advanced Micro Devices and now called only AMD. It shall be the model of nomenclature Threadripper 64 Core/128 Threads or unit of equivalent processing capability compatible with system.

3.7.1.2.38.11. Random Access Memory (RAM) supplied with unit shall be minimum of 1 Terabyte (TB) and system shall be capable of recognizing and utilizing all of it.

3.7.1.2.38.12. Operating System storage shall be 2 TB minimum and connected via non-volatile memory express (NVMe) or equivalent.

3.7.1.2.38.13. Internal data storage shall consist of a solid state drive (SSD) with a minimum of 16 TB capacity.

3.7.1.2.38.14. Graphics processing unit (GPU) or units as required shall be supplied in sufficient number to be capable of driving all graphics capabilities of the system seamlessly and shall be provided with a combined 96 GB (Gigabyte) memory at a minimum.

3.7.1.2.39. External Data Storage Hardware

3.7.1.2.39.15. Unit shall be supplied with a networked attached storage device with 8 diskless bays as a minimum.

3.7.1.2.39.16. Networked attached storage shall be supplied with a minimum of (8) x

8 TB SSD. Any additional hardware required for the system to recognize the full capacity of this external storage device shall be supplied and operating with the unit.

3.7.1.3. Office/Lab Standard Ergonomic Chair

3.7.1.3.40. Shall be of rolling type with at least (5) legs/castors

3.7.1.3.41. Ergonomically adjustable with minimum adjustments

3.7.1.3.41.17. Height

3.7.1.3.41.18. Tilt (entire chair)

3.7.1.3.41.19. Backrest angle

3.7.1.3.41.20.

3.7.1.4. The workstation shall not negatively affect or impede the operation, function, or maintainability of the unit.

3.8. Sufficient hardware to manage all machine functions continuously for CT scans that could run up to 8 hours in duration. Image Acquisition/Processing – The system shall include all software necessary to acquire images created by the system and process them completely to meet or exceed all capabilities listed in Section 3.1 of this document. The software should be capable at a minimum of the following functions:

3.8.1. Image Averaging

3.8.1.1. System shall include the below two modes of image averaging. Both shall be capable of averaging up to 256 image frames in either of two these two modes:

3.8.1.1.42. Weighted Summation Method

3.8.1.1.43. Rolling Average Method

3.8.2. Image Resolution

3.8.2.1. System shall be capable of mosaic imaging stitching capability

3.8.3. Image Storage

3.8.3.1. Storage in raw mode is adequate for data as acquired in real time.

3.8.3.2. Video shall be stored in the form of .avi files

3.8.3.3. Images shall be capable of being read and stored in all of the following formats:

3.8.3.3.44. TIFF 32-bit/16-bit/8-bit

3.8.3.3.45. .bmp

3.8.3.3.46. .jpg

3.8.3.3.47. DICONDE

3.8.4. Image Measurement and Analysis

3.8.4.1. The system shall be equipped with VGSTUDIO MAX image measurement and analysis software or equivalent.

3.9. Automatic Scan Geometry Corrections – System shall be capable of performing scan geometry corrections automatically.

3.10. Process Control Software – The system shall include Process Control Software and routines that are capable of verifying/validating the system checks prescribed in ASTM E2737.

3.11. Installation – Installation shall be performed and completed by personnel qualified for installation by the

OEM of the equipment installed.

3.11.1. Installation shall be accomplished in the space prescribed in Attachment 1.

3.11.2. Installation shall be complete including:

3.11.2.1. Transportation

3.11.2.2. Supervision

3.11.2.3. Preparation

3.11.2.4. Assembly

3.11.2.5. Testing

3.12. Tech Data – Placeholder for CDRL’s at this time

3.12.1. Operation & Maintenance (O&M) Manual

3.12.1.1. Operation Manual (CDRL A001). This manual or portion of a single O&M manual shall contain, at a minimum, instructions and procedures for proper operation of the equipment provided. This manual shall contain all resources necessary for a trained engineer, engineering technician, or production artisan to start up the machine from a cold start after being down for an extended period of time, operate the machine at capacity meeting all performance parameters as set forth in this document, properly shut down operations for short periods (e.g.

– 15-60 minute periods.), starting up after short periods as described above, continuing operations, and shutting equipment down for extended periods of time (e.g. – up to an extended period beyond 7 days). Instructions and procedures set forth shall allow continued operations as necessary and keep the equipment operating at capacity and meeting the performance prescribed in this document.

3.12.1.2. Maintenance Manual (CDRL A002). This manual or portion of a single O&M manual shall contain, at a minimum, the theory of operation, detailed preventive/periodic maintenance procedure, list of required expendables, list of recommended spare parts, a section that covers corrective maintenance, and original equipment manufacturer literature. Theory of Operation shall include the basis of design including, but not limited to, the concepts from physics and chemistry that make the machine work properly. The contractor shall provide a single compiled section for Preventive Maintenance (PM). This portion of the manual shall include all recommended PM prescribed in parameters of both usage in units of displacement covered or hours of use and by absolute time as measured by a clock or calendar. PM tasks shall be listed in an orderly format that is intuitive with the sequence necessary to keep the equipment operating at capacity and meeting the performance prescribed in this document. The lists of expendable items and spare parts shall include manufacturer and specific identification (model number/part number/etc.) of each item sufficient to procure the exact item required at a later time from an authorized dealer. In addition, the contractor shall use this manual to identify any suitable substitutes should the original item be unavailable at the time it is required. It is understood that not all items will have a substitute, but every effort shall be made to locate alternative items that could be used to repair the machine. A section of Corrective Maintenance shall include a listing of the most severe and the most likely modes of failure along with the most likely causes of each failure (there may be more than one likely cause for each failure). Likely causes shall also be linked to alternative solutions to the failure. This portion of the guide shall be formatted so that it can be used by an operator of the system as a resource in the field when diagnosing issues on the machine.

3.13. Training – Training shall be performed at FRCSE utilizing the equipment and O&M manuals provided.

Onsite training by the supplier of the equipment shall be for up to six (6) Engineers and Engineering Technicians. It is understood that some training – notably for image analysis – may be beneficial to the government and convenient for the supplier to be performed by the company that developed the software supplied with the unit. Such arrangements shall be disclosed at the proposal stage of the project with a clear statement that at least two (2) seats shall be provided for that training will be provided at no additional cost to the government. Onsite training by the supplier shall include two parts:

3.13.1. Onsite Training

3.13.1.1. Definitions

3.13.1.2. Theory of Operation

3.13.1.3. Typical qualitative and quantitative values under normal conditions

3.13.1.4. Image analysis training

3.13.2. Hands-on Training

3.13.2.1. Start up after an extended period of non-use

3.13.2.2. Start up of system for normal/daily operation

3.13.2.3. Process Control monitoring and checks

3.13.2.4. Set up of part to be inspected

3.13.2.5. Inspection of part including all functions

3.13.2.6. Shut down of system for normal/daily operation

3.13.2.7. Shut down of system of an extended period of time

4. Required Testing: Required testing in this section shall be performed after final placement and/or assembly of equipment provided at FRCSE. All prescribed testing in this section shall be performed and passed or waived at the discretion of the government before equipment can be accepted.

4.1. Radiation Safety Testing

4.1.1. Each X-ray tube will be tested at max power. If tube can be moved, it will be moved to its limits while monitoring radiation leakage with a radiac monitor. Performance shall meet all parameters of CFR 21 1020.40 as prescribe in Section 3.3.1 of this document.

4.2. Motion Control Testing

4.2.1. Motion will be initiated and measured for accuracy for each axis provided. Motion limits shall meet or exceed the parameters prescribed in Section 3.4.1 of this document.

4.2.1.1. Each axis will be run to its limits and measured

4.2.1.2. Axes will be run independently to determine any conflicts

4.3. Operations Testing

4.3.1. Operation of the unit will be tested by running test parts provided by the Government

4.3.2. The parts provided will measure 20 inches diameter, 26 inches in height, 100 pounds weight.

4.3.2.1. At the discretion of the government, a part that matches the inspection envelope as indicated in Section 3.5.1.1 or multiple parts that represent the inspection envelope will be loaded into the system. System will demonstrate that all part views prescribed in Section 3.5.3 above are visible as described in the sub-sections. These points will be verified in the neutral part position as well as the maximum ‘tilted’ views as described in Section 3.5.3.2.

4.3.2.1.1. Upper left corner

4.3.2.1.2. Center at top

4.3.2.1.3. Upper right corner

4.3.2.1.4. Lower right corner

4.3.2.1.5. Center at bottom

4.3.2.1.6. Lower left corner

4.3.2.2. At the discretion of the government, an ASTM-E2737 Duplex Phantom will be loaded and tested for the following:

4.3.2.2.1. Achieve a minimum SNR of 250 over the 0.250” – 0.750” material thickness of the Duplex Phantom

4.3.2.2.2. Achieve a minimum CNR of 2.5 on using the 2T-hole of both plaque type penetrameters on the Duplex Phantom

4.3.2.2.3. Resolve 4 out of 4 sides and the 1T-hole of both plaque type penetrameters on the Duplex Phantom

4.3.2.3. At the discretion of the government, up to three parts will be loaded and compared to a previous scan of the same part. The frequency and level of false indications shall be the same or less than the original scan and the known discrepancies shall be present and at a level of intensity of the original scan or greater.

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 1 Each

COMPUTED TOMOGRAPHY INSPECTION SYSTEM

FFP

PROJECT DESC: Computer Tomography (CT) Cabinet CEB: 6DE4EL0789SE

CC: 81SHJ32K00 NWA: 200000028681 0010 SOF: FY24 NWCF CIP POP: 12

MONTHS AFTER CONTRACT AWARD OBLIGATION REQUIRED BY

9/30/2024.

FOB: Destination

NSN: 66351023000639

PURCHASE REQUEST NUMBER: 1301121387

PSC CD: 6635

NET AMT

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 N/A N/A N/A Government

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

0001 30-SEP-2024 1 N/A

FOB: Destination

CLAUSES INCORPORATED BY REFERENCE

52.203-6 Alt I Restrictions On Subcontractor Sales To The Government

(JUN 2020) -- Alternate I

NOV 2021

52.203-11 Certification And Disclosure Regarding Payments To Influence Certain Federal Transactions

SEP 2007

52.203-12 Limitation On Payments To Influence Certain Federal Transactions

JUN 2020

52.203-16 Preventing Personal Conflicts of Interest JUN 2020 52.203-19 Prohibition on Requiring Certain Internal Confidentiality

Agreements or Statements

JAN 2017

52.204-7 System for Award Management OCT 2018 52.204-9 Personal Identity Verification of Contractor Personnel JAN 2011 52.204-10 Reporting Executive Compensation and First-Tier

Subcontract Awards

JUN 2020

52.204-13 System for Award Management Maintenance OCT 2018 52.204-16 Commercial and Government Entity Code Reporting AUG 2020 52.204-17 Ownership or Control of Offeror AUG 2020 52.204-18 Commercial and Government Entity Code Maintenance AUG 2020 52.204-25 Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment

NOV 2021

52.209-6 Protecting the Government's Interest When Subcontracting With Contractors Debarred, Suspended, or Proposed for Debarment

NOV 2021

52.209-7 Information Regarding Responsibility Matters OCT 2018 52.209-9 Updates of Publicly Available Information Regarding

Responsibility Matters

OCT 2018

52.209-10 Prohibition on Contracting With Inverted Domestic Corporations

NOV 2015

52.211-15 Defense Priority And Allocation Requirements APR 2008 52.215-8 Order of Precedence--Uniform Contract Format OCT 1997 52.219-6 Notice Of Total Small Business Set-Aside NOV 2020 52.219-9 Small Business Subcontracting Plan SEP 2023 52.219-13 Notice of Set-Aside of Orders MAR 2020 52.219-14 Limitations On Subcontracting OCT 2022 52.219-16 Liquidated Damages-Subcontracting Plan SEP 2021 52.219-33 Nonmanufacturer Rule SEP 2021 52.222-3 Convict Labor JUN 2003 52.222-19 Child Labor -- Cooperation with Authorities and Remedies NOV 2023 52.222-50 Combating Trafficking in Persons NOV 2021 52.223-11 Ozone-Depleting Substances and High Global Warming

Potential Hydrofluorocarbons.

JUN 2016

52.223-12 Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners.

JUN 2016

52.223-18 Encouraging Contractor Policies To Ban Text Messaging While Driving

JUN 2020

52.223-20 Aerosols JUN 2016 52.223-21 Foams JUN 2016 52.225-1 Buy American--Supplies OCT 2022 52.225-13 Restrictions on Certain Foreign Purchases FEB 2021 52.228-5 Insurance - Work On A Government Installation JAN 1997 52.232-25 Prompt Payment JAN 2017 52.232-33 Payment by Electronic Funds Transfer--System for Award

Management

OCT 2018

52.232-39 Unenforceability of Unauthorized Obligations JUN 2013 52.232-40 Providing Accelerated Payments to Small Business

Subcontractors

MAR 2023

52.233-1 Disputes MAY 2014 52.233-3 Protest After Award AUG 1996 52.233-4 Applicable Law for Breach of Contract Claim OCT 2004 52.242-5 Payments to Small Business Subcontractors JAN 2017 52.242-5 Payments to Small Business Subcontractors JAN 2017 52.242-13 Bankruptcy JUL 1995 52.242-15 Stop-Work Order AUG 1989 52.242-17 Government Delay Of Work APR 1984 52.246-2 Inspection Of Supplies--Fixed Price AUG 1996 52.247-34 F.O.B. Destination NOV 1991 52.247-60 Guaranteed Shipping Characteristics JAN 2017 52.253-1 Computer Generated Forms JAN 1991 252.203-7000 Requirements Relating to Compensation of Former DoD

Officials

SEP 2011

252.203-7002 Requirement to Inform Employees of Whistleblower Rights DEC 2022 252.203-7003 Agency Office of the Inspector General AUG 2019 252.203-7005 Representation Relating to Compensation of Former DoD

Officials

SEP 2022

252.204-7003 Control Of Government Personnel Work Product APR 1992 252.204-7012 Safeguarding Covered Defense Information and Cyber

Incident Reporting

JAN 2023

252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support

JAN 2023

252.204-7016 Covered Defense Telecommunications Equipment or Services -- Representation

DEC 2019

252.204-7017 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services -- Representation

MAY 2021

252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services

JAN 2023

252.204-7019 Notice of NIST SP 800-171 DoD Assessment Requirements NOV 2023 252.204-7020 NIST SP 800-171 DoD Assessment Requirements NOV 2023 252.204-7022 Expediting Contract Closeout MAY 2021 252.204-7024 Notice on the Use of the Supplier Performance Risk System MAR 2023 252.205-7000 Provision Of Information To Cooperative Agreement Holders JUN 2023 252.209-7004 Subcontracting With Firms That Are Owned or Controlled By

The Government of a Country that is a State Sponsor of Terrorism

MAY 2019

252.211-7003 Item Unique Identification and Valuation JAN 2023 252.225-7052 Restriction on the Acquisition of Certain Magnets, Tantalum, and Tungsten.

JAN 2023

252.225-7053 Representation Regarding Prohibition on Use of Certain Energy Sourced from Inside the Russian Federation

AUG 2021

252.225-7054 Prohibition on Use of Certain Energy Sourced from Inside the Russian Federation

JAN 2023

252.225-7055 Representation Regarding Business Operations with the Maduro Regime

MAY 2022

252.225-7056 Prohibition Regarding Business Operations with the Maduro Regime

JAN 2023

252.225-7059 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region - Representation

JUN 2023

252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region

JUN 2023

252.226-7001 Utilization of Indian Organizations, Indian-Owned Economic Enterprises, and Native Hawaiian Small Business Concerns

JAN 2023

252.232-7003 Electronic Submission of Payment Requests and Receiving Reports

DEC 2018

252.232-7010 Levies on Contract Payments DEC 2006 252.237-7010 Prohibition on Interrogation of Detainees by Contractor

Personnel

JAN 2023

252.243-7001 Pricing Of Contract Modifications DEC 1991 252.243-7002 Requests for Equitable Adjustment DEC 2022 252.244-7000 Subcontracts for Commercial Products or Commercial

Services

NOV 2023

252.246-7003 Notification of Potential Safety Issues JAN 2023 252.247-7023 Transportation of Supplies by Sea JAN 2023

CLAUSES INCORPORATED BY FULL TEXT

52.204-24 REPRESENTATION REGARDING CERTAIN TELECOMMUNICATIONS AND VIDEO

SURVEILLANCE SERVICES OR EQUIPMENT (NOV 2021)

The Offeror shall not complete the representation at paragraph (d)(1) of this provision if the Offeror has represented that it "does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument" in paragraph (c)(1) in the provision at 52.204-26, Covered Telecommunications Equipment or Services-- Representation, or in paragraph (v)(2)(i) of the provision at 52.212-3, Offeror Representations and Certifications- Commercial Products and Commercial Services. The Offeror shall not complete the representation in paragraph (d)(2) of this provision if the Offeror has represented that it "does not use covered telecommunications equipment or services, or any equipment, system, or service that uses covered telecommunications equipment or services" in paragraph (c)(2) of the provision at 52.204-26, or in paragraph (v)(2)(ii) of the provision at 52.212-3.

(a) Definitions. As used in this provision-

Backhaul, covered telecommunications equipment or services, critical technology, interconnection arrangements, reasonable inquiry, roaming, and substantial or essential component have the meanings provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

(b) Prohibition.

(1) Section 889(a)(1)(A) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L.

115-232) prohibits the head of an executive agency on or after August 13, 2019, from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. Nothing in the prohibition shall be construed to--

(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(2) Section 889(a)(1)(B) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L.

115-232) prohibits the head of an executive agency on or after August 13, 2020, from entering into a contract or extending or renewing a contract with an entity that uses any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. This prohibition applies to the use of covered telecommunications equipment or services, regardless of whether that use is in performance of work under a Federal contract. Nothing in the prohibition shall be construed to--

(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(c) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM) (https://www.sam.gov) for entities excluded from receiving federal awards for "covered telecommunications equipment or services."

(d) Representations. The Offeror represents that--

(1) It [ ___ ] will, [ ___ ] will not provide covered telecommunications equipment or services to the Government in the performance of any contract, subcontract or other contractual instrument resulting from this solicitation. The Offeror shall provide the additional disclosure information required at paragraph (e)(1) of this section if the Offeror responds "will" in paragraph (d)(1) of this section; and

(2) After conducting a reasonable inquiry, for purposes of this representation, the Offeror represents that--

It [ ___ ] does, [ ___ ] does not use covered telecommunications equipment or services, or use any equipment, system, or service that uses covered telecommunications equipment or services. The Offeror shall provide the additional disclosure information required at paragraph (e)(2) of this section if the Offeror responds "does" in paragraph (d)(2) of this section.

(e) Disclosures.

(1) Disclosure for the representation in paragraph (d)(1) of this provision. If the Offeror has responded "will" in the representation in paragraph (d)(1) of this provision, the Offeror shall provide the following information as part of the offer:

(i) For covered equipment--

(A) The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the original equipment manufacturer (OEM) or a distributor, if known);

(B) A description of all covered telecommunications equipment offered (include brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and

(C) Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision.

(ii) For covered services--

(A) If the service is related to item maintenance: A description of all covered telecommunications services offered (include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or

(B) If not associated with maintenance, the Product Service Code (PSC) of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision.

(2) Disclosure for the representation in paragraph (d)(2) of this provision. If the Offeror has responded "does" in the representation in paragraph (d)(2) of this provision, the Offeror shall provide the following information as part of the offer:

(i) For covered equipment--

(A) The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the OEM or a distributor, if known);

(B) A description of all covered telecommunications equipment offered (include brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and

(C) Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision.

(ii) For covered services--

(A) If the service is related to item maintenance: A description of all covered telecommunications services offered (include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or

(B) If not associated with maintenance, the PSC of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision.

(End of provision)

52.204-26 COVERED TELECOMMUNICATIONS EQUIPMENT OR SERVICES--REPRESENTATION (OCT

2020)

(a) Definitions. As used in this provision, “covered telecommunications equipment or services” and "reasonable inquiry" have the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

(b) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM) (https://www.sam.gov) for entities excluded from receiving federal awards for “covered telecommunications equipment or services”.

(c) Representations.

(1) The Offeror represents that it [ ___ ] does, [ ___ ] does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument.

(2) After conducting a reasonable inquiry for purposes of this representation, the offeror represents that it [ ___ ] does, [ ___ ] does not use covered telecommunications equipment or services, or any equipment, system, or service that uses covered telecommunications equipment or services.

52.209-11 REPRESENTATION BY CORPORATIONS REGARDING DELINQUENT TAX

LIABILITY OR A FELONY CONVICTION UNDER ANY FEDERAL LAW (FEB 2016)

(a) As required by sections 744 and 745 of Division E of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub.L. 113-235), and similar provisions, if contained in subsequent appropriations acts, the Government will not enter into a contract with any corporation that --

(1) Has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, where the awarding agency is aware of the unpaid tax liability, unless an agency has considered suspension or debarment of the corporation and made a determination that suspension or debarment is not necessary to protect the interests of the Government; or

(2) Was convicted of a felony criminal violation under any Federal law within the preceding 24 months, where the awarding agency is aware of the conviction, unless an agency has considered suspension or debarment of the corporation and made a determination that this action is not necessary to protect the interests of the Government.

(b) The Offeror represents that --

(1) It is [ ] is not [ ] a corporation that has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability; and

(2) It is [ ] is not [ ] a corporation that was convicted of a felony criminal violation under any Federal law within the preceding 24 months, 52.212-1 INSTRUCTIONS TO OFFERORS--COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES

(SEP 2023)

(a) North American Industry Classification System (NAICS) code and small business size standard. The NAICS code(s) and small business size standard(s) for this acquisition appear elsewhere in the solicitation. However, the small business size standard for a concern that submits an offer, other than on a construction or service acquisition, but proposes to furnish an end item that it did not itself manufacture, process, or produce is 500 employees, or 150 employees for information technology value-added resellers under NAICS code 541519, if the acquisition--

(1) Is set aside for small business and has a value above the simplified acquisition threshold;

(2) Uses the HUBZone price evaluation preference regardless of dollar value, unless the offeror waives the price evaluation preference; or

(3) Is an 8(a), HUBZone, service-disabled veteran-owned, economically disadvantaged women-owned, or women-owned small business set-aside or sole-source award regardless of dollar value.

(b) Submission of offers. Submit signed and dated offers to the office specified in this solicitation at or before the exact time specified in this solicitation. Offers may be submitted on the SF 1449, letterhead stationery, or as otherwise specified in the solicitation. As a minimum, offers must show--

(1) The solicitation number;

(2) The time specified in the solicitation for receipt of offers;

(3) The name, address, and telephone number of the offeror;

(4) A technical description of the items being offered in sufficient detail to evaluate compliance with the requirements in the solicitation. This may include product literature, or other documents, if necessary;

(5) Terms of any express warranty;

(6) Price and any discount terms;

(7) "Remit to" address, if different than mailing address;

(8) A completed copy of the representations and certifications at Federal Acquisition Regulation (FAR) 52.212-3 (see FAR 52.212-3(b) for those representations and certifications that the offeror shall complete electronically);

(9) Acknowledgment of Solicitation Amendments;

(10) Past performance information, when included as an evaluation factor, to include recent and relevant contracts for the same or similar items and other references (including contract numbers, points of contact with telephone numbers and other relevant information); and

(11) If the offer is not submitted on the SF 1449, include a statement specifying the extent of agreement with all terms, conditions, and provisions included in the solicitation. Offers that fail to furnish required representations or information, or reject the terms and conditions of the solicitation may be excluded from consideration.

(c) Period for acceptance of offers. The offeror agrees to hold the prices in its offer firm for 30 calendar days from the date specified for receipt of offers, unless another time period is specified in an addendum to the solicitation.

(d) Product samples. When required by the solicitation, product samples shall be submitted at or prior to the time specified for receipt of offers. Unless otherwise specified in this solicitation, these samples shall be submitted at no expense to the Government, and returned at the sender's request and expense, unless they are destroyed during preaward testing.

(e) Multiple offers. Offerors are encouraged to submit multiple offers presenting alternative terms and conditions, including alternative line items (provided that the alternative line items are consistent with FAR subpart 4.10), or alternative…