RFQ N4215821Q0062 Leslie Valves.pdf

PDF 937 KB Posted Aug 27, 2021

Attached to: Overhaul and Test Valve & Actuator 1RB-V4 & 2RB-V4 Leslie Valves
Solicitation number: N4215821Q0062
Issued by: Department of the Navy Naval Sea Systems Command

View the file

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

SEE ADDENDUM

(No Collect Calls)

N4215821Q0062 27-Aug-2021

b. TELEPHONE NUMBER

757-396-3508

8. OFFER DUE DATE/LOCAL TIME

09:00 AM 09 Sep 2021

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

N421589. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

KRISTOFFER P. SMITH

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

0 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

SEE SCHEDULE

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED ORX

SMALL BUSINESS

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

NORFOLK NAVAL SHIPYARD

ATTN: KRISTOFFER SMITH

NNSY CONTRACTING

C400, BLDG 65, 2ND FLOOR

PORTSMOUTH VA 23709-1022

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS AX

13b. RATING

DO-C9

CODE15. DELIVER TO CODE 16. ADMINISTERED BY

SEE SCHEDULE

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

FAX:

TEL: 757-396-3508 SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

NAICS:

332911

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF38

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

N4215821Q0062

Section SF 1449 - CONTINUATION SHEET

52.212-1 ADDENDUM INSTRUCTIONS

52.212-1 INSTRUCTIONS TO OFFERORS –COMMERCIAL ITEMS (JUN 2021)

ADDENDUM

Quotations shall be emailed to Kris Smith (email: kristoffer.p.smith2@navy.mil), Denise Lee (email:

denise.l.lee@navy.mil), Mrs. Ursula Adams (email: ursula.adams@navy.mil) and to USFF_NNSY_C431@NAVY.MIL by September 9, 2021 at 0900 AM Eastern.

*Required Documents:

Technical Acceptability will be evaluated to determine an overall rating of “acceptable” or “unacceptable.” This will be determined by evaluation the ability of the quote to provide a sound, compliant approach that meets all requirements and demonstrates a thorough knowledge and understating of the Statement of Work (SOW) requirements. As a sole source to Moody Marine Services, it is the contractor’s reasonability to ensure that their quotation clearly demonstrated their ability to perform these requirements.

Each quotation shall consist of the following documents, to include:

1. Completed SF 1449 with pricing for each line item being quoted in accordance with the Contract Line Item Numbers listed (CLIN);

2. Executed copies of an amendment (if applicable).

3. Completed FAR 52.212-3 Representations and Certification unless otherwise completed in SAM;

Award will be made on a sole source basis to Moody Marine Services.

Price:

The estimated amount for each line item will be added together to determine the total estimated price which will become the evaluate price.

The vendor’s proposed price will be evaluated on the basis of price reasonableness. All prices must be considered fair and reasonable as determined by the Government. Price quote shall be held firm and valid for sixty (60) days.

The completion and submission of the above items will constitute a quote and will be considered the vender’s unconditional assent to the terms and conditions of this Solicitation and any attachments and/or exhibits.

Failure to provide all of these documents by the required date and time may preclude a quotation from award consideration at the discretion of the Government.

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 1 Job

SERVICES TO OVERHAUL LESLIE VALVE 1RB-V4

FFP

SERVICES TO OVERHAUL LESLIE VALVE 1RB-V4

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

MILSTRIP: N4215821RC10904

PURCHASE REQUEST NUMBER: N4215821RC10904

PSC CD: L020

NET AMT

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0002 1 Job

SERVICES TO OVERHAUL LESLIE VALVE 2RB-V4

FFP

SERVICES TO OVERHAUL LESLIE VALVE 2RB-V4

FOB: Destination

MILSTRIP: N4215821RC10905

PURCHASE REQUEST NUMBER: N4215821RC10905

PSC CD: L020

NET AMT

SOW

Scope:

1.1 Title: Overhaul and test valve & actuator of (1 ea), 1.5 inch, 1RB-V4 & (1 ea), 1.5 inch, 2RB-V4 Leslie valves for USS Dwight D. Eisenhower (CVN-69)

2.0 Location of work:

2.1 Leslie Technical Representative facility in Chesapeake, Va.

3.0 References:

3.1 DWG 18501: DIAPHRAGM CONTROL VALVE CLASS DONS AND DDONS 85/85R

ACTUATOR

3.2 DWG 18356N: Diaphragm Control Valve Actuators Size 55, 55R, 85, and 85R. Assy Det and LM

3.3 APL: 88A050391X

3.4 UIPI 0505-908: Level II and III Cleanliness

3.5 UIPI 5050-450: Steam Plant Cleanliness for Piping Systems/Equipment

4.0 Requirements:

4.1 This service will be accomplished at Leslie Tech Rep’s repair facility. Leslie Tech Rep shall inspect/groom/repair the following valve IAW manufacturers drawing replacing software back to manufacturers drawing specifications. If during inspections, Leslie Tech Rep finds discrepant hardware requiring repair to meet manufacturers drawing specifications, an amendment to the contract will be required for additional parts or repairs. In addition to inspect/groom/repair vendor to supply services and material for repacking valve, replacing base and dome gaskets, diaphragms, seals, o-rings and any other consumable items that return valve back to drawing specifications. No modifications to valve authorized without prior approval from NNSY Engineer. Material for overhaul/repair provided by Leslie Tech Rep.

5.0 Contractor Requirements:

5.1 Inspect all accessible portions of the valves for any damage or condition which would adversely affect operation.

5.2 Lap seats and discs to obtain SAT Blue-check. Valves must not leak more than 2.29 OZ/min IAW Mil-V-18030.

5.3 Repack valve.

5.4 Replace diaphragms, seals, o-rings, gaskets, and any other normal wear items required to overhaul valve.

5.5 Operate valves using hand operator and ensure proper operation with no binding, adjust stem and ensure that the disc hard seats, and ensure travel indicator is adjusted correctly.

5.6 Ensure proper spring preload is set.

5.7 Apply air pressure to diaphragm and ensure valve strokes correctly without binding, and ensure diaphragm does not leak

5.8 Perform any other checks to ensure valves operates correctly.

5.9 Contractor required to have invoice signed off when work is completed for payment. NNSY will provide point of contact for authorized personnel for validation.

5.10 Return ship overhauled & tested valves once completed back to NNSY, building 276.

6.0 Government Responsibility

6.1 Government shall package and ship 1 ea.1RB-V4 valve & 1 ea. 2RB-V4 valve to Leslie Technical

Representative for Overhaul.

SAFETY

"Per FAR 22.102-1(a) entitled "Safety", Contractors are hereby informed that their employees or representatives present on property under Norfolk Naval Shipyard cognizance must follow Federal and State OSHA requirements OSHE OSHECM Chapter Hazardous Energy Control (HEC) requirements or safety requirements for site specific location of the contract.

Contractors and Non-NNSY Government Agencies (NNGAs) are hereby informed that their employees or representatives present on property under Norfolk Naval Shipyard (NNSY) cognizance must adhere to Federal OSHA requirements for hazardous energy control IAW 29 CFR 1915.89 and must follow Hazardous Energy Control (HEC) procedures as identified in NAVSEA’s Occupational Safety, Health, and Environment Corporate Manual (OSHECM) Chapter 250 (latest revision), when performing work under NNSY contract. All HEC work to be performed by Contractors and NNGAs requires that NNSY Technical Points of Contact (TPOCs) and/or Contracting Officer’s Representatives (CORs) be notified of the HEC scope of work prior to starting work. Any changes or deviations in the initial scope of HEC work requires the NNSY TPOCs and/or CORs be informed of the change/deviation. Appendix 250.B-1 through B-3 of OSHECM Chapter 250 for multiple employer work identifies when Contractors and NNGAs are required to assign their Lockout/Tags-Plus Coordinator (LOTC) to coordinate HEC work with the cognizant NNSY LOTC. HEC locks shall be provided by the contractor or NNGA for their employees use. The HEC locks shall have red bodies with name labels or name tags affixed, identifying who installed the HEC lock(s) and a point of contact telephone number. HEC lock name labels and tags must be made of materials that will hold up to the environment to which they are exposed. HEC tags used for Tags-Plus HEC work shall be provided by the cognizant NNSY LOTC to the contractor or NNGA for their use if machinery, equipment, or systems (MES) cannot be locked out. OSHECM Chapter 250 Tags-Plus procedures will be strictly followed.

a. Contractors and NNGAs may obtain electronic copies of OSHECM Chapter 250 (latest revision) and access the OSHA 1915.89 web site by using the following link to NNSY’s public access web site:

http://www.navsea.navy.mil/shipyards/norfolk/default.aspx

b. Names and contact information for NNSY LOTCs and/or the Building Monitor will be provided by NNSY

TPOC and/or CORs set forth elsewhere in this award document.

Cleanliness Controls:

Maintain Level II cleanliness requirements for piping system/equipment on Control Air Piping. Maintain Steam Plant Cleanliness Controls IAW UIPI5050-450 NNSY SUPP-1 on Reboiler Drain System and valve internals. No grease, oil, preservative, or other foreign material may be present. For uncoated surfaces:

Adherent corrosion products typical on surfaces of the material being considered (e.g. light rust on carbon steel) are acceptable. No loose corrosion products may be present. All sealants or adhesives used in steam plant systems or components for both shipboard and in shop applications shall be QPL approved.

Additionally, the sealants and adhesives listed on the QPL are approved for use only when specified by component technical manual/drawing or as authorized by Engineering Division written instructions.

IAW NAVSEA 0989-064-3000:

Appendix F, 4.b - For complex parts or components in steam plant systems listed in Ch 1 that cannot be easily cleaned to satisfy the requirements of this manual at the shipyard before installation (e.g.

turbines, valves, etc), the requirements of Ref 4 (STR-4P37) should be invoked for procurement of new or replacement components or factory refurbishment.

Appendix F, 4.c - For procurement of new or replacement components or factory refurbishment of components which will be permanently installed in steam plant systems listed in Ch 1 and contain non-metallic parts in contact with steam plant fluid, the requirements of Ref 5 (STR-4P38) should be invoked. Ref 5 need not be invoked for non-metallic parts in temporary plugs or covers or in temporary support systems

CLAUSES INCORPORATED BY FULL TEXT

C-211-H018 APPROVAL BY THE GOVERNMENT (NAVSEA) (JAN 2019)

Approval by the Government as required under this contract and applicable specifications shall not relieve the Contractor of its obligation to comply with the specifications and with all other requirements of the contract, nor shall it impose upon the Government any liability it would not have had in the absence of such approval.

(End of text)

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

0001 POP 25-SEP-2021 TO

07-JUL-2022

N/A NORFOLK NAVAL SHIPYARD

SEE TECHNICAL POC

FOR DELIVERY AND CONTACT

INFORMATION

PORTSMOUTH VA 23709

TEL: WITHIN

FOB: Destination

N42158

0002 POP 25-SEP-2021 TO

07-JUL-2022

N/A NORFOLK NAVAL SHIPYARD

SEE TECHNICAL POINTS OF CONTACT

SEE STATEMENT OF WORK

PORTSMOUTH VA 23709-5000

FOB: Destination

N42158

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 Destination Government Destination Government 0002 Destination Government Destination Government

E-246-H016 INSPECTION AND ACCEPTANCE OF F.O.B. DESTINATION DELIVERIES (NAVSEA) (OCT 2018)

Item(s) 0001 and 0002 - Inspection and acceptance shall be made at destination by a representative of the Government.

G-232-H004 GOVERNMENT PURCHASE CARD METHOD OF PAY (NAVSEA) (OCT 2018)

(a) Payment will be made via the Government Purchase Card once evidence of material receipt or service completion and an invoice are received. At the time of shipment, or completion of services, but no later than two business days after shipment, contact the individual identified below to obtain the account number to be charged. The Government Purchase Card must not be charged without first obtaining final authorization from the appropriate Government Purchase Cardholder.

(b) To facilitate delivery, clearly mark all boxes, cartons, containers and packing slips with the order number referenced on the order. Include an itemized and serialized invoice. (NOTE: these numbers can be found on the face of the order or contract.)

(c) To expedite payment, please do not include your invoice with your shipment. Please mail invoice separately to the address below. Any invoice is required for payment to be authorized using the Government Purchase Card. Current DoD and Local policy does not allow the use of third party card processing companies such as Pay Pal, PayPro, etc.

(d) Mail invoices and bankcard authorizations to:

[Negotiator fill in appropriate contact information to reflect site specific Points of Contact and or mailing instructions]

G-232-H005 SUPPLEMENTAL INSTRUCTIONS REGARDING INVOICING (NAVSEA) (JAN 2019)

(a) For other than firm fixed priced contract line item numbers (CLINs), the Contractor agrees to segregate costs incurred under this contract/task order (TO), as applicable, at the lowest level of performance, either at the sub line item number (SLIN) or CLIN level, rather than at the total contract/TO level, and to submit invoices reflecting costs incurred at that level. Supporting documentation in Wide Area Workflow (WAWF) for invoices shall include summaries of work charged during the period covered as well as overall cumulative summaries by individual labor categories, rates, and hours (both straight time and overtime) invoiced; as well as, a cost breakdown of other direct costs (ODCs), materials, and travel, by technical instruction (TI), SLIN, or CLIN level. For other than firm fixed price subcontracts, subcontractors are also required to provide labor categories, rates, and hours (both straight time and overtime) invoiced; as well as, a cost breakdown of ODCs, materials, and travel invoiced. Supporting documentation may be encrypted before submission to the prime contractor for WAWF invoice submittal.

Subcontractors may email encryption code information directly to the Contracting Officer and Contracting Officer Representative (COR). Should the subcontractor lack encryption capability, the subcontractor may also email detailed supporting cost information directly to the Contracting Officer and COR; or other method as agreed to by the Contracting Officer.

(b) Contractors submitting payment requests and receiving reports to WAWF using either Electronic Data Interchange (EDI) or Secure File Transfer Protocol (SFTP) shall separately send an email notification to the COR and Contracting Officer on the same date they submit the invoice in WAWF. No payments shall be due if the contractor does not provide the COR and Contracting Officer email notification as required herein.

WAWF INSTRUCTIONS

WIDE AREA WORKFLOW PURCHASE CARD INVOICING

INSTRUCTIONS

The invoicing instructions will assist contractors and vendors with preparing payment documentation and avoiding billing errors that could result in payment delays. Following the information provided in this section will increase the accuracy and timeliness of vendor payments.

(a) Wide Area Workflow (WAWF) training. The contractor/vendor shall follow the training instructions of the WAWF “Web-Based Training” section, and use the “PIEE Training Site” prior to submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based

Training” link via the WAWF home page at https://piee.eb.mil/. The contractor/vendor may contact the WAWF Help Desk at 866-618-5988 for assistance if needed.

(b) Vendor Commercial and Government Entity (CAGE) Code. The contractor/vendor shall ensure there is an active registration with System for Award Management (SAM), and shall enter the CAGE Code information located on the first page of the contract. The contractor/vendor name and address on the contract must match the information in WAWF.

(1) There is no fee to register, or maintain vendor registration, in SAM. If an email is received from a company claiming to represent SAM.gov, be cautious. If an email is received from a company offering to help vendor registration in SAM.gov, asking to contact them and pay them money, be cautious. These messages are not from the U.S. Government. It is free to register and to maintain vendor registration in SAM.gov.

(2) The contractor/vendor may contact the System for Award Management (SAM) Help Desk at www.fsd.gov for assistance or review the SAM website at www.sam.gov for further information.

(c) Contract number. The contractor/vendor shall ensure the “Contract Number” and “Delivery Order” in WAWF match the Contract Number and Order/Call Number (if applicable) in the contract.

Do not use the Bid or Solicitation number.

(d) Document type. The contractor/vendor shall enter the document type (i.e., Invoice Receiving Report) provided in the “252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS” section of the contract. Contact your Contract Administrator if you are unable to locate this information. Do not select “FAST PAY” unless specified within the terms of the contract.

(e) Document routing. The contractor/vendor shall use the information in the WAWF “Routing Data Table” section of the contract to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system. Contact your Contract Administrator if you are unable to locate this information.

(1) Pay Official DoDAAC. This DoDAAC will be pre-populated in WAWF from the Electronic Data Access (EDA) system if the contract number exists in the EDA system (i.e., CRCARD).

(2) Service Acceptor and LPO DoDAAC. These DoDAACs ensure the invoice is routed to the correct Command for payment.

(f) Final invoice. The contractor/vendor shall identify if the invoice is a final invoice. Do not mark “Y” for “Yes” if additional invoices will be submitted for the contract.

(g) Period of Performance (POP). The contractor/vendor shall enter the “Period of Performance From Date” and “Period of Performance To Date” information in WAWF for the date range the services were completed. These dates shall not fall outside of the POP specified in the terms of the contract.

(1) The contractor/vendor may specify a date range for multiple billed Line Items containing unique POPs in this field. Example: The POP for Line Item 0001 is 10/01/20-10/31/20, and the POP for Line Item 0002 is 11/01/20-11/30/20. The contractor/vendor would enter a POP of 10/01/20-11/30/20 in this field. The specific Line Item POP information would then be entered into the “Description” field.

(h) Line Item data. The contractor/vendor shall ensure the Line Item data is entered in accordance with the terms of the contract.

(1) Agency Accounting Identifier (AAI). The contractor/vendor shall ensure the “AAI” field in WAWF matches the Line of Accounting information in the “Accounting and Appropriation” section of the contract (i.e., 056521 or 068732). This information ensures the transactions are properly routed through the official financial system.

(2) Contract Line Item Number/Subline Item Number (CLIN/SLIN). The contractor/vendor shall ensure the “Item No.” in WAWF matches the “Item No.” in the contract for each billed CLIN/SLIN.

(3) Standard Document Number (SDN). The contractor/vendor shall ensure the “SDN” in WAWF matches the Military Standard Requisitioning and Issue Procedures (MILSTRIP) number in the contract for each billed CLIN/SLIN.

(4) Accounting Classification Reference No. (ACRN). The contractor/vendor shall ensure the “ACRN” in WAWF matches the “ACRN” in the contract for each billed CLIN/SLIN. The ACRN amounts in WAWF should balance the Line Item total in WAWF.

(5) Quantity Shipped. The contractor/vendor shall ensure the “Qty. Shipped” in WAWF matches the quantity for each CLIN/SLIN invoiced.

(6) Unit of Measure. The contractor/vendor shall ensure the “Unit of Measure” in WAWF matches the “Unit” terms in the contract for each billed CLIN/SLIN. a. Partial payment terminology must be included in the terms of the contract if billing outside of the “Unit of Measure”. The inclusion of the payment clause in the contract allows the contractor to be paid for accepted partial deliveries of supplies or partial performance of services that comply with all applicable contract requirements.

Example: The contract states the CLIN/SLIN is for “1 Job”. Partial payment terminology is needed for the vendor to submit multiple invoices instead of submitting one invoice at the completion of the work.

(7) Unit Price. The contractor/vendor shall ensure the “Unit Price” in WAWF matches the “Unit Price” terms in the contract for each billed CLIN/SLIN.

(8) Unique Identifier (UID). The contractor /vendor shall ensure the UID information is entered in accordance with the terms of the contract if applicable.

(9) Description. The contractor/vendor shall provide a complete description for the material or services for each billed CLIN/SLIN (i.e., Rental for 09/01/21 through 09/30/21 for Dry Dock X).

(i) Freight. The contractor/vendor shall submit freight charges as CLIN 9999 in WAWF unless otherwise directed by the contract.

(1) Should freight charges exceed the documented amount within the contract, the contractor/vendor shall contact the Contract Administrator to request a modification prior to submitting the invoice in

WAWF.

(2) Contractors/vendors will support the prepaid transportation freight charges with a copy of the carrier’s receipted freight bill or evidence of receipt from the carrier if greater than $100.00.

(3) If a receipted freight bill is not available, then the contractor/vendor can provide other support for the claim for reimbursement of freight charges. The contractor/vendor must furnish a copy of the transportation company’s pickup record or a copy of the contractor’s/vendor’s internal business document showing the contractor/vendor turned the material over to a particular shipper. The contractor/vendor then must support either of these documents with a copy of the transportation company’s invoice and a statement that the charges have been paid.

(j) WAWF attachments. The contractor/vendor shall attach the proof of shipment documentation in WAWF if applicable. This documentation will assist with “receipting” the material by the NNSY Receiving Department if needed. (1) All material should be shipped to NNSY Building 276 unless otherwise stated in the contract.

(2) Provide a legible contract number or lead JML number on the outside of all shipped boxes and packing slips to ensure the NNSY Receiving Department is able to receipt the material properly.

(k) Contractor/Vendor Point of Contact (POC). The contractor/vendor shall provide the title and telephone number of the person to notify in the event the invoice is deemed improper.

(l) Invoice rejection. The contractor/vendor shall review the comments section in WAWF for the rejection justification. Ensure the invoice is resubmitted with a different letter at the end of the invoice (i.e., A, B, C, etc.) once corrections have been made.

(m) WAWF and NNSY Accounts Payable Branch POCs.

(1) The contractor/vendor may contact the WAWF Help Desk at 866-618-5988 for assistance with submitting the invoice(s) into WAWF.

(2) The contractor/vendor may contact the NNSY Accounts Payable Branch at NNSY_PurchaseCard@navy.mil or (757) 396-2636 for invoice questions or for invoice status if payment has not been provided within 30 days of submission. The contractor/vendor shall provide the contract number and invoice number in the Subject line of the email correspondence.

CLAUSES INCORPORATED BY REFERENCE

52.204-19 Incorporation by Reference of Representations and

Certifications.

DEC 2014

52.222-11 Subcontracts (Labor Standards) MAY 2014 52.232-33 Payment by Electronic Funds Transfer--System for Award

Management

OCT 2018

52.232-39 Unenforceability of Unauthorized Obligations JUN 2013

52.232-40 Providing Accelerated Payments to Small Business Subcontractors

DEC 2013

52.245-1 Government Property JAN 2017 252.203-7000 Requirements Relating to Compensation of Former DoD

Officials

SEP 2011

252.203-7002 Requirement to Inform Employees of Whistleblower Rights SEP 2013 252.204-7003 Control Of Government Personnel Work Product APR 1992 252.204-7012 Safeguarding Covered Defense Information and Cyber

Incident Reporting

DEC 2019

252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support

MAY 2016

252.204-7016 Covered Defense Telecommunications Equipment or Services -- Representation

DEC 2019

252.204-7017 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services -- Representation

MAY 2021

252.211-7003 Item Unique Identification and Valuation MAR 2016 252.225-7048 Export-Controlled Items JUN 2013 252.232-7010 Levies on Contract Payments DEC 2006 252.232-7017 Accelerating Payments to Small Business Subcontractors--

Prohibition on Fees and Consideration

APR 2020

252.237-7010 Prohibition on Interrogation of Detainees by Contractor Personnel

JUN 2013

252.244-7000 Subcontracts for Commercial Items JAN 2021 252.247-7023 Transportation of Supplies by Sea FEB 2019

52.204-24 REPRESENTATION REGARDING CERTAIN TELECOMMUNICATIONS AND VIDEO

SURVEILLANCE SERVICES OR EQUIPMENT (OCT 2020)

The Offeror shall not complete the representation at paragraph (d)(1) of this provision if the Offeror has represented that it "does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument" in paragraph (c)(1) in the provision at 52.204-26, Covered Telecommunications Equipment or Services-- Representation, or in paragraph (v)(2)(i) of the provision at 52.212-3, Offeror Representations and Certifications- Commercial Items. The Offeror shall not complete the representation in paragraph (d)(2) of this provision if the Offeror has represented that it "does not use covered telecommunications equipment or services, or any equipment, system, or service that uses covered telecommunications equipment or services" in paragraph (c)(2) of the provision at 52.204-26, or in paragraph (v)(2)(ii) of the provision at 52.212-3.

(a) Definitions. As used in this provision-

Backhaul, covered telecommunications equipment or services, critical technology, interconnection arrangements, reasonable inquiry, roaming, and substantial or essential component have the meanings provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

(b) Prohibition.

(1) Section 889(a)(1)(A) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L.

115-232) prohibits the head of an executive agency on or after August 13, 2019, from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. Nothing in the prohibition shall be construed to--

(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(2) Section 889(a)(1)(B) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L.

115-232) prohibits the head of an executive agency on or after August 13, 2020, from entering into a contract or extending or renewing a contract with an entity that uses any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. This prohibition applies to the use of covered telecommunications equipment or services, regardless of whether that use is in performance of work under a Federal contract. Nothing in the prohibition shall be construed to--

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(c) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM) (https://www.sam.gov) for entities excluded from receiving federal awards for "covered telecommunications equipment or services."

(d) Representations. The Offeror represents that--

(1) It [] will, [] will not provide covered telecommunications equipment or services to the Government in the performance of any contract, subcontract or other contractual instrument resulting from this solicitation. The Offeror shall provide the additional disclosure information required at paragraph (e)(1) of this section if the Offeror responds "will" in paragraph (d)(1) of this section; and

(2) After conducting a reasonable inquiry, for purposes of this representation, the Offeror represents that--

It [] does, [] does not use covered telecommunications equipment or services, or use any equipment, system, or service that uses covered telecommunications equipment or services. The Offeror shall provide the additional disclosure information required at paragraph (e)(2) of this section if the Offeror responds "does" in paragraph (d)(2) of this section.

(e) Disclosures.

(1) Disclosure for the representation in paragraph (d)(1) of this provision. If the Offeror has responded "will" in the representation in paragraph (d)(1) of this provision, the Offeror shall provide the following information as part of the offer:

(i) For covered equipment--

(A) The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the original equipment manufacturer (OEM) or a distributor, if known);

(B) A description of all covered telecommunications equipment offered (include brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and

(C) Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision.

(ii) For covered services--

(A) If the service is related to item maintenance: A description of all covered telecommunications services offered (include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or

(B) If not associated with maintenance, the Product Service Code (PSC) of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision.

(2) Disclosure for the representation in paragraph (d)(2) of this provision. If the Offeror has responded "does" in the representation in paragraph (d)(2) of this provision, the Offeror shall provide the following information as part of the offer:

(i) For covered equipment--

(A) The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the OEM or a distributor, if known);

(ii) For covered services--

(B) If not associated with maintenance, the PSC of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision.

(End of provision)

52.204-26 COVERED TELECOMMUNICATIONS EQUIPMENT OR SERVICES--REPRESENTATION (OCT

2020)

(a) Definitions. As used in this provision, “covered telecommunications equipment or services” and "reasonable inquiry" have the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

(b) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM) (https://www.sam.gov) for entities excluded from receiving federal awards for “covered telecommunications equipment or services”.

(1) The Offeror represents that it [ ___ ] does, [ ___ ] does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument.

(2) After conducting a reasonable inquiry for purposes of this representation, the offeror represents that it [ ___ ] does, [ ___ ] does not use covered telecommunications equipment or services, or any equipment, system, or service that uses covered telecommunications equipment or services.

(End of provision)

52.212-4 CONTRACT TERMS AND CONDITIONS-- COMMERCIAL ITEMS (OCT 2018)

(a) Inspection/Acceptance. The Contractor shall only tender for acceptance those items that conform to the requirements of this contract. The Government reserves the right to inspect or test any supplies or services that have been tendered for acceptance. The Government may require repair or replacement of nonconforming supplies or reperformance of nonconforming services at no increase in contract price. If repair/replacement or reperformance will not correct the defects or is not possible, the Government may seek an equitable price reduction or adequate consideration for acceptance of nonconforming supplies or services. The Government must exercise its post-acceptance rights (1) within a reasonable time after the defect was discovered or should have been discovered; and

(2) before any substantial change occurs in the condition of the item, unless the change is due to the defect in the item.

(b) Assignment. The Contractor or its assignee may assign its rights to receive payment due as a result of performance of this contract to a bank, trust company, or other financing institution, including any Federal lending agency in accordance with the Assignment of Claims Act (31 U.S.C. 3727). However, when a third party makes payment (e.g., use of the Governmentwide commercial purchase card), the Contractor may not assign its rights to receive payment under this contract.

(d) Disputes. This contract is subject to 41 U.S.C. chapter 71, Contract Disputes'', as amended (41 U.S.C. 601-613).

Failure of the parties to this contract to reach agreement on any request for equitable adjustment, claim, appeal or action arising under or relating to this contract shall be a dispute to be resolved in accordance with the clause at FAR 52.233-1, Disputes, which is incorporated herein by reference. The Contractor shall proceed diligently with performance of this contract, pending final resolution of any dispute arising under the contract.

(e) Definitions. The clause at FAR 52.202-1, Definitions, is incorporated herein by reference.

(f) Excusable delays. The Contractor shall be liable for default unless nonperformance is caused by an occurrence beyond the reasonable control of the Contractor and without its fault or negligence such as, acts of God or the public enemy, acts of the Government in either its sovereign or contractual capacity, fires, floods, epidemics, quarantine restrictions, strikes, unusually severe weather, and delays of common carriers. The Contractor shall notify the Contracting Officer in writing as soon as it is reasonably possible after the commencement or any excusable delay, setting forth the full particulars in connection therewith, shall remedy such occurrence with all reasonable dispatch and shall promptly give written notice to the Contracting Officer of the cessation of such occurrence.

(g) Invoice.

(1) The Contractor shall submit an original invoice and three copies (or electronic invoice, if authorized) to the address designated in the contract to receive invoices. An invoice must include--

(i) Name and address of the Contractor;

(ii) Invoice date and number;

(iii) Contract number, line item number and, if applicable, the order number;

(iv) Description, quantity, unit of measure, unit price and extended price of the items delivered;

(v) Shipping number and date of shipment, including the bill of lading number and weight of shipment if shipped on Government bill of lading;

(vi) Terms of any discount for prompt payment offered;

(vii) Name and address of official to whom payment is to be sent;

(viii) Name, title, and phone number of person to notify in event of defective invoice; and

(ix) Taxpayer Identification Number (TIN). The Contractor shall include its TIN on the invoice only if required elsewhere in this contract.

(x) Electronic funds transfer (EFT) banking information.

(A) The Contractor shall include EFT banking information on the invoice only if required elsewhere in this contract.

(B) If EFT banking information is not required to be on the invoice, in order for the invoice to be a proper invoice, the Contractor shall have submitted correct EFT banking information in accordance with the applicable solicitation provision, contract clause (e.g., 52.232-33, Payment by Electronic Funds Transfer—System for Award Management, or 52.232-34, Payment by Electronic Funds Transfer--Other Than System for Award Management), or applicable agency procedures.

(2) Invoices will be handled in accordance with the Prompt Payment Act (31 U.S.C. 3903) and Office of Management and Budget (OMB) prompt payment regulations at 5 CFR part 1315.

(h) Patent indemnity. The Contractor shall indemnify the Government and its officers, employees and agents against liability, including costs, for actual or alleged direct or contributory infringement of, or inducement to infringe, any United States or foreign patent, trademark or copyright, arising out of the performance of this contract, provided the Contractor is reasonably notified of such claims and proceedings.

(i) Payment.--

(1) Items accepted. Payment shall be made for items accepted by the Government that have been delivered to the delivery destinations set forth in this contract.

(2) Prompt payment. The Government will make payment in accordance with the Prompt Payment Act (31 U.S.C.

3903) and prompt payment regulations at 5 CFR part 1315.

(3) Electronic Funds Transfer (EFT). If the Government makes payment by EFT, see 52.212-5(b) for the appropriate EFT clause.

(4) Discount. In connection with any discount offered for early payment, time shall be computed from the date of the invoice. For the purpose of computing the discount earned, payment shall be considered to have been made on the date which appears on the payment check or the specified payment date if an electronic funds transfer payment is made.

(5) Overpayments. If the Contractor becomes aware of a duplicate contract financing or invoice payment or that the Government has otherwise overpaid on a contract financing or invoice payment, the Contractor shall--

(i) Remit the overpayment amount to the payment office cited in the contract along with a description of the overpayment including the--

(A) Circumstances of the overpayment (e.g., duplicate payment, erroneous payment, liquidation errors, date(s) of overpayment);

(B) Affected contract number and delivery order number, if applicable;

(D) Contractor point of contact.

(ii) Provide a copy of the remittance and supporting documentation to the Contracting Officer.

(6) Interest.

(i) All amounts that become payable by the Contractor to the Government under this contract shall bear simple interest from the date due until paid unless paid within 30 days of becoming due. The interest rate shall be the interest rate established by the Secretary of the Treasury as provided in 41 U.S.C.

7109, which is applicable to the period in which the amount becomes due, as provided in (i)(6)(v) of this clause, and then at the rate applicable for each six-month period as fixed by the Secretary until the amount is paid.

(ii) The Government may issue a demand for payment to the Contractor upon finding a debt is due under the contract.

(iii) Final decisions. The Contracting Officer will issue a final decision as required by 33.211 if--

(A) The Contracting Officer and the Contractor are unable to reach agreement on the existence or amount of a debt within 30 days;

(B) The Contractor fails to liquidate a debt previously demanded by the Contracting Officer within the timeline specified in the demand for payment unless the amounts were not repaid because the Contractor has requested an installment payment agreement; or

(C) The Contractor requests a deferment of collection on a debt previously demanded by the Contracting Officer (see 32.607-2).

(iv) If a demand for payment was previously issued for the debt, the demand for payment included in the final decision shall identify the same due date as the original demand for payment.

(v) Amounts shall be due at the earliest of the following dates:

(A) The date fixed under this contract.

(B) The date of the first written demand for payment, including any demand for payment resulting from a default termination.

(vi) The interest charge shall be computed for the actual number of calendar days involved beginning on the due date and ending on--

(A) The date on which the designated office receives payment from the Contractor;

(B) The date of issuance of a Government check to the Contractor from which an amount otherwise payable has been withheld as a credit against the contract debt; or

(C) The date on which an amount withheld and applied to the contract debt would otherwise have become payable to the Contractor.

(vii) The interest charge made under this clause may be reduced under the procedures prescribed in 32.608-2 of the Federal Acquisition Regulation in effect on the date of this contract.

(j) Risk of loss. Unless the contract specifically provides otherwise, risk of loss or damage to the supplies provided under this contract shall remain with the Contractor until, and shall pass to the Government upon:

(1) Delivery of the supplies to a carrier, if transportation is f.o.b. origin; or

(2) Delivery of the supplies to the Government at the destination specified in the contract, if transportation is f.o.b.

destination.

(k) Taxes. The contract price includes all applicable Federal, State, and local taxes and duties.

(l) Termination for the Government's convenience. The Government reserves the right to terminate this contract, or any part hereof, for its sole convenience. In the event of such termination, the Contractor shall immediately stop all work hereunder and shall immediately cause any and all of its suppliers and subcontractors to cease work. Subject to the terms of this contract, the Contractor shall be paid a percentage of the contract price reflecting the percentage of the work performed prior to the notice of termination, plus reasonable charges the Contractor can demonstrate to the satisfaction of the Government using its standard record keeping system, have resulted from the termination. The Contractor shall not be required to comply with the cost accounting standards or contract cost principles for this purpose. This paragraph does not give the Government any right to audit the Contractor's records. The Contractor shall not be paid for any work performed or costs incurred which reasonably could have been avoided.

(m) Termination for cause. The Government may terminate this contract, or any part hereof, for cause in the event of any default by the Contractor, or if the Contractor fails to comply with any contract terms and conditions, or fails to provide the Government, upon request, with adequate assurances of future performance. In the event of termination for cause, the Government shall not be liable to the Contractor for any amount for supplies or services not accepted, and the Contractor shall be liable to the Government for any and all rights and remedies provided by law. If it is determined that the Government improperly terminated this contract for default, such termination shall be deemed a termination for convenience.

(n) Title. Unless specified elsewhere in this contract, title to items furnished under this contract shall pass to the Government upon acceptance, regardless of when or where the Government takes physical possession.

(o) Warranty. The Contractor warrants and implies that the items delivered hereunder are merchantable and fit for use for the particular purpose described in this contract.

(p) Limitation of liability. Except as otherwise provided by an express warranty, the Contractor will not be liable to the Government for consequential damages resulting from any defect or deficiencies in accepted items.

(q) Other compliances. The Contractor shall comply with all applicable Federal, State and local laws, executive orders, rules and regulations applicable to its performance under this contract.

(r) Compliance with laws unique to Government contracts. The Contractor agrees to comply with 31 U.S.C. 1352 relating to limitations on the use of appropriated funds to influence certain Federal contracts; 18 U.S.C. 431 relating to officials not to benefit; 40 U.S.C. chapter 37, Contract Work Hours and Safety Standards; 41 U.S.C.

chapter 87, Kickbacks; 41 U.S.C. 4712 and 10 U.S.C. 2409 relating to whistleblower protections; 49 U.S.C. 40118, Fly American; and 41 U.S.C. chapter 21 relating to procurement integrity.

(s) Order of precedence.

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated Aug 27, 2021.