RFQ 9177 Statement of Work.pdf

PDF 190 KB Posted

Attached to
Prequalification for Professional Engineering Services
Solicitation number
9177
Issued by
Denton County, Texas

About this file

This Statement of Work is issued by the City of Denton, Texas, for RFQ 9177 seeking prequalification of professional engineering firms to provide design, project management, and construction-phase assistance services for City public works infrastructure projects. The City intends to establish a prequalified eligibility list of at least one firm per work category, with the ability to award an unspecified number of professional service contracts over a two-year period with an option to renew for a third year. Major work categories include Project/Program Management; Design of Roadways, Sidewalks, Bike Lanes, Intersections and Bridges; Design of Traffic Signals and Street Lights; Design of Wastewater, Water, and Drainage Infrastructure; and Design of Structural items. Basic services encompass project scope development, stakeholder coordination, public engagement, monthly reporting, right-of-way assistance, risk management, budget management, adherence to City standards, and assessment of alternative delivery methods. Design services include data acquisition, preliminary engineering, environmental assessment, traffic studies, design in compliance with City criteria, construction plan and specification preparation, permit acquisition, construction-phase assistance, as-built drawings, and public engagement support. All engineering services must be performed under the direct supervision of a Texas-licensed Professional Engineer. Interested firms must submit a maximum 20-page response per category that includes a two-page narrative of qualifications and local experience, three to five similar projects completed within the last ten years with detailed documentation, and resumes of key personnel with relevant experience from the last five years.

Pricing is not a factor in the prequalification evaluation process, and fees will be negotiated on a project-specific basis following award. The City does not guarantee work to any prequalified firm, and individual projects will be awarded through re-evaluation of each firm's qualifications, availability, expertise, and workload relative to the specific project requirements. Evaluation will be based on weighted scoring criteria: Experience and Qualifications of the Respondent (30 percent), Past Performance and Project Experience (30 percent), and Proposed Staff Members (40 percent). The top ten highest-scoring firms achieving a minimum score of 80 points and meeting all requirements will be placed on the eligibility list for their qualified categories. Payment for services will be made within 30 days of receipt of monthly invoices according to the firm's negotiated rate schedule. Travel reimbursement at cost only is available for distances exceeding 75 miles from the City of Denton and requires advance City approval, with mileage calculated using GSA.gov rates. All submissions must include current Texas State Registration copies and licenses or certifications of the lead engineer and any staff signing or sealing official documents.

View the file

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

City of Denton Statement of Work

RFQ 9177 – Prequalification for Professional Engineering Services

The City of Denton is seeking Professional Engineering Services. The City intends to award to qualified respondent(s) list and to have the ability to award an unspecified number of professional service contracts per work category over the next three years before re-advertising another RFQ for these services.

A: INTRODUCTION

The City of Denton (City), a home-rule city of the State of Texas, is requesting submissions of qualifications to select at least one firm per category with demonstrated experience in providing professional services for the delivery of projects AND consulting services to provide staffing support for the Capital Projects/Engineering Department. Firms may submit proposals for any or all individual categories of work related to design, project management, and construction-phase assistance for City public works infrastructure, as outlined in this solicitation. The responses shall be submitted to the City of Denton in a sealed submission.

Awarded firm(s) shall have the ability to accomplish all aspects of the services requested.

B: SCOPE OF WORK

Description of Work The City of Denton is seeking to pre-qualify at least one respondent per category for a period of two years and the option to renew for a third year. Interested firms may be qualified for one or more of the following work categories:

Major work categories:

• Project/Program Management

• Design of Roadways, Sidewalks, Bike Lanes, Intersections and Bridges

• Design of Traffic Signals and Street Lights

• Design of Wastewater, Water, Drainage Infrastructure

• Design of Structural items (Pavilions, Pedestrian Bridges, Foundations, etc.)

Basic services for project management include, but are not limited to the following:

• Development of a complete project scope, schedule, and budget

• Coordination with internal and external stakeholders

• Public engagement through public meetings, notices, etc.

• Provide timely project updates and reports through all phases of the project on a, at minimum, monthly basis

• Assistance in acquiring right of way and easements necessary to construct the project

• Assistance in acquiring geotechnical testing necessary for project construction

• Management project risks, challenges, and opportunities

• Managing the project budget and recommending invoices for approval

• Regular project coordination meetings with appropriate stakeholders

• Reports to the City Engineer or approved designee to deliver projects assigned

• Adherence to the City’s established Project Management Methodology

• Adherence to and use of the City’s Standard Specifications, Criteria Manuals and

Standard Details

• Ability to assess and make recommendations on the use of Alternative Delivery

Methods for specific projects and/or programs

Basic Services for design categories include, but are not limited to the following:

• Acquisition of data required to complete the project design

• Preliminary engineering

• Environmental assessment

• Traffic studies/counts

• Engineering design in adherence to City of Denton Criteria Manuals, Specifications and

Standards

• Preparation of construction plans

• Preparation of Specifications, and contract bid documents

• Application for and receipt of all required permits

• Attending project status, pre-bid, and preconstruction meetings

• Construction phase assistance and close-out

• Assistance in public engagement

• Assistance in coordinating with internal and external stakeholders

• Providing sealed project “As-Built” drawings upon completion of each project

• Ability to assess and make recommendations on the use of Alternative Delivery

Methods for specific projects and/or programs

Additional services, not included in basic services, may be requested by the City in writing and would be executed only upon acceptance by both parties of the scope and costs of each additional service.

C: EXPECTATIONS OF THE CITY DURING AND AFTER THE CONCLUSION OF THE RFQ AWARD

The City wants to establish a pre-qualified eligibility list of Professional Engineering firm(s) who have demonstrated competence and qualifications to perform the work required for the awarded category and as outlined in this document.

To be placed on the eligibility list for one or more categories, engineering firm(s) must be able to meet our expectations as outlined in this solicitation, including services listed in Section B - Scope of Work, and meet minimum score requirements as outlined in Section J – Selection Criteria.

The City will collaborate with the successful firm(s) for seamless start-to-finish project completion.

RFQ submissions and subsequent documentation will comply with all Federal, State, County, and City laws, regulations, and licensing. The successful firm(s) will provide a contract administration liaison that is competent and experienced to work with the City and any selected contractor(s).

Project deliverables and specific scopes will be determined in writing for each project awarded under this PREQUALIFIED LIST RFQ.

D: OBJECTIVES

To provide qualified Professional Engineering Services to accomplish the needs of the City of Denton’s Capital Improvement Plan. The established pre-qualified list of eligible engineering firms does not guarantee the use of these specific engineering firms; the City reserves the right to select and use individual engineers with indefinite quantity, as stated with solicitation upfront and in the contract that no work is guaranteed. The number of projected individual contracts and total value over the next two to three years is presently unknown. As work becomes available, firms will be reviewed and scored for each project. To award work, the City intends to re-evaluate each firm’s Statement of Qualifications and experience as it relates to each new project. Firms on the eligibility list will be reevaluated based on selection criteria relevant to each project. Selection criteria after the award may consist of the firm’s qualifications and experience as it relates to the specific project, availability, expertise, workload, and any other relevant factors. The City intends to use the information provided during the pre-qualification process to re-evaluate for award.

Deliverables and specific project scopes will be determined in writing for each project awarded under this RFQ. At the sole discretion of the City, we may request additional information during the selection process.

E: PROFESSIONAL SERVICES REQUESTED

All engineering services will be performed under the direct supervision of a Registered Professional Engineer licensed to practice in the State of Texas. The Engineer will seal all documents requiring the seal of a Professional Engineer. The services will meet or exceed the minimum standards of practice established by the Texas Board of Professional Engineers.

Interested firms must be registered by the State of Texas to provide services in the State. All fees and taxes are the responsibility of the offeror.

With each submittal, firms will be required to include copies of current licenses or certifications of the lead Engineer and any other firm employee who will be signing and/or sealing official documents. The firm(s) lead engineer, or any other major staff involved in this contract shall not be substituted or replaced without written acceptance by the City of Denton.

F: FIRM RESPONSIBILITIES

The successful firm(s) shall perform all necessary actions as defined by each awarded contract that results from this RFQ. Due to the uniqueness and variability of projects subject to this RFQ, the Firm’s responsibilities, project scopes, schedules, and budgets shall be negotiated and agreed upon in writing at the time services are required.

G: CITY RESPONSIBILITIES

The City shall perform all necessary actions as defined by each awarded contract resulting from this RFQ. Due to the uniqueness and variability of projects subject to this RFQ, the City’s responsibilities shall be negotiated and agreed upon in writing at the time services are required.

H: PRICING

Pricing will not be a factor in evaluating and awarding for this RFQ. Any, and all, pricing references will apply if selected and once a specific project is awarded.

Fees for each contract shall be negotiated on a project-specific basis. Payment will be made within 30 days of receipt of the Firm’s monthly invoice to be paid according to the Firm’s rate schedule attached to each contract resulting from this RFQ.

Any travel will be reimbursed at cost ONLY after receipts are received, verified, and approved.

Travel reimbursement would only be applicable if the Engineer travels outside a 75-mile radius of the City of Denton and must use the Gsa.gov website for mileage reimbursement. Travel outside the 75-mile radius must be approved in advance by the City.

I: SUMMARY OF QUALIFICATIONS

Interested firms must submit a summary of qualifications for each desired work category as outlined in this section and throughout the scope of work. Each firm(s) must possess a State of Texas Registration as a minimum requirement (copy required with submission). Firms will be limited to a maximum of 20 pages total per category submission. Submissions should be tailored to the specific category being submitted on. Please include at a minimum the following:

• Maximum two (2) page narrative providing firm’s interests, abilities, and qualifications.

Provide firm’s most local locations that have relevant experience in engineering services for a governmental entity on local, state, or federally funded projects.

• Include services your firm can provide in-house.

• Submit 3-5 projects that are similar per category and have been completed within the last ten (10) years. Documentation should include the following for each project submitted:

• Project name

• Owner Name, Contact Name, Phone number, and Email Address

• Project time and actual completion time

• Project Detailed Summary with an emphasis on design

• Team members and roles

• Challenges & Solutions

• Experience with alternative delivery methods should be highlighted.

• Provide Resumes of Available, Proposed, Experienced Key Personnel who will be assigned to the City of Denton projects. Please include at a minimum the following:

• Description of the individuals directly responsible for servicing the City, including their qualifications and length of service in their current positions.

• Relevant experience in the work categories, specifically within the last five (5) years.

Identify if projects were completed with current firm or previous firm.

J: SELECTION CRITERIA

All firm(s) will be evaluated and scored for each submitted work category as outlined in the evaluation procedures of this solicitation. The total possible score for each submission shall be calculated using the weighted scoring indicated below. Based on the outcome of the computations performed, each submission will be assigned a raw score. The assigned weight will then be applied to these scores to calculate an overall score for each submission for completion of the final scoring process. The top up to 10 highest-scoring firms with a score of 80 and above that meet and follow all the requirements as outlined in this specification will be placed on the eligibility list for the qualified categories.

All firm(s) will be evaluated using the following criteria.

a) Experience and qualifications of the Respondent - (FACTOR: 30%).

b) Past Performance and experience on projects - (FACTOR: 30%).

c) Proposed Staff Members - (FACTOR: 40%).

File details come from the government source that posted it. Updated .