RFQ 47QSSC-26-R-0027.pdf

REQUEST FOR QUOTATION

NSN: 5120-00-180-0798

PLEASE COMPLETE ALL SECTIONS IN YELLOW:

1. Offeror Information:

2. Requirement Details

NSN: 5120-00-180-0798

SCREWDRIVER, OFFSET:

NSN Description:

Four-way offset screwdriver with flat tips at each end.

Design: One piece construction or blades securely fastened into the ends. The tips shall be arranged in such a manner that eight positions in 360 degrees are available to engage screw slots.

There shall be four blades, two at each end, protruding in opposite directions with one blade being in line with the longitudinal axis of the body and the other blade at right angles to the axis. The two blades at the other end of the body shall be parallel to each other and set at 90 degrees to longitudinal axis of the body.

Tip Size: 1/4 inch Tip Thickness: .037 inch Overall Length: 5-1/4 inches Torsion Moment: 40 inch-pounds Material: Steel

Legal Business Name Contact Name and Title

Address Email

Phone UEI

Business Type Manufacturer Dealer Business Size Large Small

NSN/Part Number 5120-00-180-0798 QTY Multiple Orders

Requested

DARO

30 days

Small Business Set-Aside

Yes No Requirement Type

Generic Brand Name Brand Name or Equal

Delivery Zip Code Various

NAICS 332510

RFQ 47QSSC-26-R-0027

KEY FIELDS:

TECHNICAL DOCUMENT

Standard incorporates the following standards into one. B107.600

Standard Use Key Field Code:

B107.15 Flat Tip Screwdrivers 1B107.15 B107.26 Screwdriver Bits, Hand Drive n 1B107.26 B107.30 Cross Tip Screwdrivers 1B107.30 B107.31Screwdrivers, Cross Tip Gaging 1B107.31

In accordance with ASME B107.600-2016, Screwdrivers Incorporating ASME B107.15, ASME B 107.26, ASME B107.30, and ASME B107.31

ITEM MARKING

Each item Shall Be Marked in a Permanent and Legible Manner with:

1) Manufacturer's Part Number

2) Manufacturer's Name or Identifying Symbol, and

3) Country of Origin

Each Package including the unit, single, intermediate, and exterior container mu st be labeled with the requisition number or Transportation Control Number (TCN). Requisition Number and TCN are found on the Purchase Order.

PACKAGING

One (1) set shall be preserved and packaged in a unit package designed to protect the item against damage during shipment, handling and storage.

MARKING

In general, unless otherwise specified by the contracting officer, marking of shipments shall be in accordance with the GSAM provision/ Clause 552.211-73, marking. In more detail: Marking of supplies for deliveries to domestic civilian activities shall comply with the latest edition of Federal Standard 123. That is, unit, intermediate, and transport packages shall be marked directly on the side surface of the package or on a label affixed to the package, with the identification marking as specified in the standard. Transport packages shall also have, in addition to the identification marking, a shipping label that includes the purchase order, contract, or the requisition numbers; as applicable, including the consignor and consignee names (i.e. ship from/ to), gross weight, cube and piece number.

Marking of supplies for deliveries to civilian activities, export locations, including commercial freight forwarders and third party logistics providers, and excluding freight entering the Defense Transportation System, shall be the same as deliveries to domestic locations except that the shipping label shall show on the same label, or another label affixed next to the shipping label, the ultimate consignee (i.e. Mark for AAC).

Marking of supplies f or deliveries to domestic military activities shall comply with the latest edition of Military Standard 129. That is, unit, intermediate, and exterior or shipping containers shall be marked directly on the side surfaces of the package or on a label affixed to the package, with the identification marking as specified in the standard. Exterior or shipping containers shall also have in addition to the identification marking, a Military Shipping Label (MSL) per the standard.

Marking of supplies for deliveries to military activities, export locations, including forwarding and container consolidation points (CCPs) shall be the same as deliveries to domestic locations except that the MSL must also show the ultimate consignee (Mark for DoDAAC) and the Transportation Control Number (TCN).

"Latest version" is defined as the version in effect on the date of bid submittal. Federal Standards and Military Standards can be accessed on-line via the Defense Logistics Agency's "Assist" Quicksearch web site: http://qu icksearch.dla.mil/

PACKAGING/ PACKING

Unless packaging in accordance with MIL-STD-2073-1 Standard Practice for Military Packaging is specified in the solicitation, contract or order, packaging/ packing of supplies, exclusive of hazardous material, f or domestic and export shipments to civilian and military activities shall comply with GSAM Provision/ Clause 552.211-75 Preservation, Packaging and Packing which references the National Motor Classification Standard (NMFC) and/ or the latest requirements of ASTM D-3951, Standard Practice for Commercial Packaging . Until the commercial packaging/ packing requirement in GSAM Clause 552.211-75 is revised, compliance to either the GSAM clause or the ASTM D-3951, Standard Practice for Commercial Packaging will be acceptable; however, compliance to the ASTM requirements is mandatory for GSS contracts and is preferred for all other contracts. In case of conflict between the GSAM clause and the revision of ASTM D-3951, the ASTM requirement shall govern.

Packaging of hazardous material (HM) supplies for shipments shall comply with the GSAM provision/ Clause 552.223-73, Preservation, Packaging, Packing, Marking and Labeling of Hazardous Materials (HAZMAT) for Shipments. That is, packing of HM for domestic shipments shall comply with the latest versions of DOT HMR in 49 CFR, parts 171-180, and OSHA HCS in 29 CFR, part 1910.1200.

Packing of HM for export shipments (includes forwarding and container consolidation points, commercial freight forwarders and third party logistics providers) shall comply with the latest versions of DOT HMR in 49 CFR, parts 171-180, and OSHA HCS in 29 CFR, part 1910.1200, and the applicable IMDG, IATA, ICAO, AFMAN-24 standard for the mode of transportation.

WOOD PACKAING MATERIAL

Packaging and packing of supplies using Wood Packaging Material (WPM) on a pallet or skid for export shipments (includes forwarding and container and consolidation points, commercial freight forwarders and third party logistics providers) shall comply with the requirements in provision/ Clause GSAM 552.211.89, Manufactured Wood Packaging Material for Export or the applicable requirements in ASTM D-3951 relative to the WPM. That is, all wood shall be treated and stamped appropriately for export, including the actual pallet or skid, if made of wood.

PALLETIZATION AND PREPARATION FOR DELIVERY

The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wood pallet or skid is used for shipping, the requirements of GSAM 552.211.89, Non-Manufactured Wood Packaging Material for Export, shall apply.

ITEMS REQUIRING SAFETY DATA SHEETS (SDSs) Items requiring Safety Data Sheets (SDSs) shall be provided by the contractor as specified in IPD and the FAR Provision/Clause 48 CFR 52.223 3 Hazardous Material Identification and Material Safety Data, and the latest version of Federal Standard 313. One copy of the SDS shall be included inside or affixed to the outside of each transport package. If affixed outside the SDS must be placed in a weather resistant envelope.

Data in all 16 sections of the OSHA HazCom/ GHS standards will be required. HM shall be labeled with an OSHA/ GHS compliant label to include the following data: (1) Product identifier, (2) Signal Word, (3) Hazard Statements, (4) Pictograms, (5) Precautionary Statements, and (6) Chemical Manufacturer, Importer, or Other

Responsible Party information.

NOTE: Delivery addresses will either be disclosed at time PO is issued, or the vendor may be required to contact the GSA Transportation Department at dodtransportationrequest@gsa.gov.

3. Offeror’s Quote and Terms

Manufacturer

Part Number

Type of item quoted Brand Name ‘or Equal’ N/A Country of Origin

Price - EA (Discount Requested) Price - Total

Price valid through date Delivery lead time (in days)

FOB – Please Quote Origin Prepay & Add (will issue official RFQ as FOB Destination if sources are identified)

Reason if quoted lead time exceeds the request

4. Offeror Checklist:

Registered with OMS Vendor Portal or EDI to receive orders electronically.

Representations and Certifications are current in SAM.gov.

Signed MIL-STD-129R form is attached to this RFQ submission OR is on file with the InstaQuote Program.

Technical and other relevant specification documents are attached to this RFQ submission.

SELF CERTIFICATION:

By signing below, the Offeror certifies that all submitted information is accurate and that all offered items fully comply with the specifications of the RFQ. The Offeror agrees that any item delivered that does not meet these requirements shall be replaced with a fully compliant item or refunded in full, at the Government’s discretion, and that the Offeror is responsible for any related costs incurred by the Government.

Signature: ______________________________________________________ Date:__________________________

A foreign corporation that is selected for the award must have an agent who resides in the United States and a physical address (not a P.O. Box) in the United States prior to award of this order. If you are a foreign corporation, please indicate that you understand this requirement and that you have an agent and a physical address (not a P.O. Box) in the United States. Not providing this assurance in your quote or not having these resources located in the United States will lead to finding your quote noncompliant and it will no longer be considered for award.

Signature: ______________________________________________________ Date:__________________________

5. APPLICABLE TERMS AND CONDITIONS:

This is a combined synopsis/solicitation for commercial items, prepared in accordance with FAR Part 12. This announcement constitutes the only solicitation, and no separate written solicitation will be issued.

● Any order resulting from this RFQ will be issued under the authority of FAR Part 12. Offerors must be registered and active in SAM.gov prior to award.

● Quoted prices must reflect the Offeror’s best terms, inclusive of all applicable discounts. The Government reserves the right to reject any offer that is non-responsive or fails to comply with this RFQ.

6. BASIS OF AWARD:

To be considered for award, offerors must:

● Submit a complete, accurate, and fully compliant quote with all required documentation and completed fields.

● Submit a quote via email with all required documentation by the closing date and time stated in the solicitation.

Note: Offers received after the time specified in the solicitation will be deemed “late”. Acceptance of incomplete or late submissions is solely at the discretion of the Contracting Officer.

APPLICABLE PROVISIONS INCORPORATED BY REFERENCE

52.204-7: System for Award Management—Registration 52.204-7 with Alt I: System for Award Management—Registration, with Alternate I

Name: _____________________

TIN: _______________________

(d)

Owner type CAGE code Legal business name Immediate owner Highest-level owner Predecessor*

52.212-1: Instructions to Offerors—Commercial Products and Commercial Services.

52.212-2: Evaluation—Commercial Products and Commercial Services.

(a) The following factor will be used to evaluate: Lowest Price Technically Acceptable

52.222-18: Certification Regarding Knowledge of Child Labor for Listed End Products

(a) Definition.

Forced or indentured child labor means all work or service-

(1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or

(2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties.

(b) Listed end products. The following end product(s) being acquired under this solicitation is (are) included in the List of Products Requiring Contractor Certification as to Forced or Indentured Child Labor, identified by their country of origin. There is a reasonable basis to believe that listed end products from the listed countries of origin may have been mined, produced, or manufactured by forced or indentured child labor.

Listed end product Listed countries of origin

(c) Certification. The Government will not make award to an offeror unless the offeror, by checking the appropriate block, certifies to either paragraph (c)(1) or paragraph (c)(2) of this provision

(1) ☐ The offeror will not supply any end product listed in paragraph (b) of this provision that was mined, produced, or manufactured in a corresponding country as listed for that end product.

(2) ☐ The offeror may supply an end product listed in paragraph (b) of this provision that was mined, produced, or manufactured in the corresponding country as listed for that product. The offeror certifies that it has made a good faith effort to determine whether forced or indentured child labor was used to mine, produce, or manufacture such end product. On the basis of those efforts, the offeror certifies that it is not aware of any such use of child labor.

52.225-1: Buy American-Supplies 52.225-2: Buy American Certificate (a)(1) The Offeror certifies that each end product, except those listed in paragraph (b) of this provision, is a domestic end product and that each domestic end product listed in paragraph (c) of this provision contains a critical component.

(2) The Offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products. For those foreign end products that do not consist wholly or predominantly of iron or steel or a combination of both, the Offeror shall also indicate whether these foreign end products exceed 55 percent domestic content, except for those that are COTS items. If the percentage of the domestic content is unknown, select “no”.

(3) The Offeror shall separately list the line item numbers of domestic end products that contain a critical component (see FAR 25.105).

(4) The terms “commercially available off-the-shelf (COTS) item,” “critical component,” "domestic end product," "end product," and "foreign end product" are defined in the clause of this solicitation entitled "Buy American-Supplies."

(b) Foreign End Products:

Line item no.

Country of origin

Exceeds 55% domestic content?

(yes/no)

52.240-90: Security Prohibitions and Exclusions Representations and Certifications

(End of provisions)

APPLICABLE CLAUSES INCORPORATED BY REFERENCE

52.203-17: Contractor Employee Whistleblower Rights 52.203-19: Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements 52.204-13: System for Award Management—Maintenance 52.209-10: Prohibition on Contracting with Inverted Domestic Corporations 52.212-4: Terms and Conditions—Commercial Products and Commercial Services.

52.212-4 with Alt I: Contract Terms and Conditions—Commercial Products and Commercial Services.

52.219-4: Notice of Price Evaluation Preference for HUBZone Small Business Concerns

52.219-6: Notice of Total Small Business Set-Aside 52.219-6 with Alt I: Notice of Total Small Business Set-Aside, with Alternate I 52.222-3: Convict Labor 52.222-19: Child Labor—Cooperation with Authorities and Remedies 52.222-36: Equal Opportunity for Workers with Disabilities

Employee class Monetary wage – fringe benefits

52.222-50: Combating Trafficking in Persons 52.223-23: Sustainable Products 52.225-1: Buy American-Supplies 52.226-8: Encouraging Contractor Policies to Ban Text Messaging While Driving 52.232-29: Terms for Financing of Commercial Products and Commercial Services 52.232-30: Installment Payments of Commercial Products and Commercial Services 52.232-33: Payment by Electronic Funds Transfer—System for Award Management 52.232-40: Providing Accelerated Payments to Small Business Subcontractors 52.233-3: Protest After Award 52.233-4: Applicable Law for Breach of Contract Claim 52.240-91: Security Prohibitions and Exclusions 52.240-93: Basic Safeguarding of Covered Contractor Information Systems 52.244-6: Subcontracts for Commercial Products and Commercial Services

(End of clauses)