RFQ 36C24525Q0816.docx

36C24525Q0816

RFQ 36C24525Q0816

This solicitation is for the purchase of Home Delivery of Peritoneal Dialysis Supplies. This shall be a one-year Firm-Fixed Priced Contract. The requirement will be at the following site:

Washington VA Medical Center 50 Irving St., NW Washington, DC 20422.

This solicitation closes on Thursday, September 11th, 2025, at 12:00 PM EST. Late submissions will not be accepted.

This solicitation is Unrestricted.

NAICS Code: 3339113 – Surgical Appliance & Supplies Manufacturing PSC Code: 6505 – Drugs & Biologicals

All quoters shall submit a completed SF1449 to the email address in the Combined Synopsis Solicitation.

The Government will formulate its offer from the information submitted. Quoters are allowed to submit more than one quote to the solicitation.

The evaluation will be comparative evaluation I.A.W. FAR 13.106-2 (b) (3) to come up with the best benefit for the Government.

Please fill out sections:

Section A Blocks: 11,12, and 17a: Company name, address, Code (cage code), Facility code (DUN’s #), Phone, and UEI.

Section B CONTRACT ADMINISTRATION DATA (Name of company, POC, Email, Phone number)

STATEMENT OF WORK

SALIENT CHARACTERISTICS

PRICE/COST SCHEDULE- ITEM INFORMATION

DELIVERY SCHEDULE- How long for delivery (i.e., Date, days, or ARO) Excel Spread sheet that is provided. The submission of the excel sheet “S02-36C24525Q0816 Line Items” is mandatory for this RFQ.

This solicitation has incorporated clause 52.247-34 F.O.B. Destination. Only quotes that are submitted FOB Destination will be considered; accordingly, any quote submitted FOB Origin or FOB Destination Prepaid and Ship will be considered noncompliant, and the vendor will be disqualified.

The Government reserves the right to one-on-one discussions with quoters to clarify any information given.

The Government reserves all rights to award all or none. This RFQ is for a single award.

The Government reserves the right to exchanges/ discussions with Best-Suited Contractor Once the Government determines the contractor that is best-suited (i.e., the apparent successful contractor), the Government reserves the right to communicate with only that contractor to address and remaining issues, if necessary, and finalize a task order with that contractor. These issues may include technical and price.

The submission of the excel sheet “S02-36C24525Q0816 Line Items” is mandatory for this RFQ.

*******************************IMPORATANT***************************************

If the quoter is a distributor and not the manufacturer, a letter of distribution/authorization from manufacturer is required for all quoters; accordingly, a failure to supply distribution/ authorization letter the quoter will be considered noncompliant and the vendor will be disqualified.

*******************************IMPORTANT***************************

This question is mandatory to be answered. Not answering this question will eliminate your quote(s) from the solicitation process for award. Your quote will be considered non-compliant.

What is the country of manufacture of the item(s) your company is offering to the Government?

(Answer here) If multiple countries, please list on another sheet of paper and submit with your packet by line-item number.

*******************************IMPORTANT***********************************

Fill out FAR 52.225-2 completely in the provisions or the response will not be accepted.

*******************************IMPORTANT***********************************

System updates may lag policy updates. The System for Award Management (SAM) may continue to require entities to complete representations based on provisions that are not included in agency solicitations, including 52.223-22, Public Disclosure of Greenhouse Gas Emissions and Reduction Goals—Representation, and paragraph (t) of 52.212-3, Offeror Representations and Certifications— Commercial Products and Commercial Services. Contracting officers will not consider these representations when making award decisions or enforce requirements. Entities are not required to, nor are they able to, update their entity registration to remove these representations in SAM.

PAGE 1 OF

1. REQUISITION NO.

2. CONTRACT NO.

3. AWARD/EFFECTIVE DATE

4. ORDER NO.

5. SOLICITATION NUMBER

6. SOLICITATION ISSUE DATE

a. NAME

b. TELEPHONE NO. (No Collect Calls)

8. OFFER DUE DATE/LOCAL

TIME

9. ISSUED BY

CODE

10. THIS ACQUISITION IS

UNRESTRICTED OR

SET ASIDE:

% FOR:

SMALL BUSINESS

HUBZONE SMALL

BUSINESS

SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

WOMEN-OWNED SMALL BUSINESS

(WOSB) ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

8(A)

NAICS:

SIZE STANDARD:

11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

12. DISCOUNT TERMS

13a. THIS CONTRACT IS A

RATED ORDER UNDER

DPAS (15 CFR 700)

13b. RATING

14. METHOD OF SOLICITATION

RFQ

IFB

RFP

15. DELIVER TO

CODE

16. ADMINISTERED BY

CODE

17a. CONTRACTOR/OFFEROR

CODE

FACILITY CODE

18a. PAYMENT WILL BE MADE BY

CODE

TELEPHONE NO.

UEI:

EFT:

PHONE:

FAX:

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN OFFER 18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK BELOW IS CHECKED

SEE ADDENDUM

19.

20.

21.

22.

23.

24.

ITEM NO.

SCHEDULE OF SUPPLIES/SERVICES

QUANTITY

UNIT

UNIT PRICE

AMOUNT

(Use Reverse and/or Attach Additional Sheets as Necessary)

25. ACCOUNTING AND APPROPRIATION DATA

26. TOTAL AWARD AMOUNT (For Govt. Use Only) 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1, 52.212-4. FAR 52.212-3 AND 52.212-5 ARE ATTACHED. ADDENDA

ARE

ARE NOT ATTACHED.

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA

ARE

ARE NOT ATTACHED

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN _______________

29. AWARD OF CONTRACT: REF. ___________________________________ OFFER

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

DATED ________________________________. YOUR OFFER ON SOLICITATION

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED

SET FORTH HEREIN IS ACCEPTED AS TO ITEMS:

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER) 30b. NAME AND TITLE OF SIGNER (TYPE OR PRINT) 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER (TYPE OR PRINT) 31c. DATE SIGNED

AUTHORIZED FOR LOCAL REPRODUCTION

(REV. NOV 2021)

PREVIOUS EDITION IS NOT USABLE

Prescribed by GSA - FAR (48 CFR) 53.212

7. FOR SOLICITATION

INFORMATION CALL:

STANDARD FORM 1449

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, & 30

09-05-2025 Phillip G Duba 304-263-0811 X7610 09-11-2025

12:00PM

EDT

19ACQ

Department of Veterans Affairs

VAMC (613)

VISN 5 Contract Satellite Office 510 Butler Avenue, Building 306A Martinsburg WV 25405

X

339113 800 Employees

N/A

Department of Veterans Affairs Washington, DC VA Medical Center (688)

50 Irving St., NW Washington DC 20422

Department of Veterans Affairs

VAMC (613)

VISN 5 Contract Satellite Office 510 Butler Avenue, Building 306A Martinsburg WV 25405

PAYMENT WILL BE MADE BY

FSC e-Invoice Payment Invoice must be submitted electronically http://www.fsc.va.gov/einvoice.asp http://www.fsc.va.gov/einvoice.asp

See CONTINUATION Page

HOME DELIVERY PERITONEAL DIALYSIS SUPPLIES

Period of Performance: October 1, 2025 - September 30, 2026

All final proposals are due no later than 12:00PM EST on Thursday, September 11, 2025, to Phillip.Duba@va.gov. Please submit Price Proposal, Technical Proposal, and ALL pertinent information. Late proposals will not be accepted.

See CONTINUATION Page

Phillip G Duba Contracting Officer

Table of Contents

SECTION B - CONTINUATION OF SF 1449 BLOCKS

B.1 CONTRACT ADMINISTRATION DATA

1. Contract Administration: All contract administration matters will be handled by the following individuals:

a. CONTRACTOR:

TBD

b. GOVERNMENT:

Contracting Officer 36C245 Phillip G Duba Department of Veterans Affairs

VAMC (613)

VISN 5 Contract Satellite Office 510 Butler Avenue, Building 306A Martinsburg WV 25405

2. CONTRACTOR REMITTANCE ADDRESS: All payments by the Government to the contractor will be made in accordance with:

3. INVOICES: Invoices shall be submitted in arrears:

4. GOVERNMENT INVOICE ADDRESS: All Invoices from the contractor shall be submitted electronically in accordance with VAAR Clause 852.232-72 Electronic Submission of Payment Requests.

Invoice must be submitted electronically http://www.fsc.va.gov/einvoice.asp

ACKNOWLEDGMENT OF AMENDMENTS: The offeror acknowledges receipt of amendments to the Solicitation numbered and dated as follows:

B.2 STATEMENT OF WORK

Home Delivery Peritoneal Dialysis Items

1. Introduction The Washington, DC VAMC requires a contractor to provide home delivery of peritoneal dialysis items and home dialysis supplies for veterans. The service should ensure timely, accurate, and reliable delivery of all necessary dialysis supplies to the patients' residences, ensuring continuity of care and adherence to prescribed treatment regimens.

2. Objectives The objective of this contract is to deliver peritoneal dialysis supplies directly to veterans' homes, ensuring they have the necessary items for their treatment. The contractor will be responsible for the coordination, packaging, shipment, and delivery of supplies, as well as managing any related customer service inquiries.

Description of Supplies/Services:

Provide Peritoneal Dialysis (PD) as the Medical Center’s Supply vendor to provide home dialysis supplies/DME. CAPD and CCPD supplies – Any type of solution usage and supplies in amount(s) based on prescriptions from physicians. This will include peritoneal dialysis solutions and specialized/ancillary supplies. This will include rentals for peritoneal dialysis cycler machines and assistance with managing the administrative and logistical functions of home dialysis, while allowing VA clinicians focus on clinical care and outcomes. Supplies will be delivered on a 28-day delivery cycle.

3. Scope of Work The contractor shall provide the following services:

3.1 Order Processing

· Process orders for peritoneal dialysis supplies as prescribed by VA healthcare providers.

· Maintain a secure system for tracking orders and delivery status.

3.2 Supply Management

· Ensure adequate inventory of prescribed peritoneal dialysis supplies.

· Provide supplies that meet or exceed FDA standards and VA specifications.

3.3 Packaging and Delivery

· Package supplies in a manner that ensures items remain sterile and are not damaged during transit.

· Deliver supplies to veterans' homes within specified timelines.

· Provide delivery notifications to veterans, including tracking information.

3.4 Customer Service

· Provide a dedicated customer service team to handle inquiries, complaints, and support requests from veterans and VA personnel.

· Address and resolve delivery issues promptly.

3.5 Quality Control

· Implement quality control measures to ensure accuracy and reliability of deliveries.

· Report any discrepancies or issues to the VA Medical Center immediately.

4. Deliverables The contractor shall deliver the following:

4.1 Monthly Reports

· Provide monthly reports detailing order fulfillment, delivery times, and any incidents or issues encountered.

4.2 Customer Feedback

· Collect and report customer feedback to the VA Medical Center for continuous service improvement.

5. Performance Metrics The contractor's performance will be evaluated based on the following criteria:

5.1 Timeliness

· Deliver at least 95% of orders within the agreed-upon delivery window.

5.2 Accuracy

· Ensure 99% accuracy in order fulfillment and delivery.

5.3 Customer Satisfaction

· Achieve a customer satisfaction rate of at least 90% as measured by surveys and feedback.

6. Period of Performance The contract period will be 12 months from the award date.

7. Security and Confidentiality The contractor must comply with all relevant regulations and policies regarding the handling of veterans' personal health information (PHI) and personally identifiable information (PII). All data must be handled in accordance with HIPAA and VA privacy requirements.

8. Contractor Qualifications The contractor must demonstrate:

· Experience in managing and delivering medical supplies.

· Capability to handle large volumes of orders and deliveries.

· Adequate customer service infrastructure.

· Compliance with all federal, state, and local regulations.

9. Point of Contact The VA Medical Center will designate a Contracting Officer's Representative (COR) who will be the primary point of contact for contract administration and oversight.

10. Invoicing and Payment The contractor shall submit monthly invoices detailing the supplies delivered and orders fulfilled. Payment will be made upon verification and acceptance of delivered items by the VA Medical Center.

B.3 PRICE/COST SCHEDULE

ALL QUANTITIES ARE ESTIMATES

ORDERS TO BE PLACED IN ACCORDANCE WITH PHYSICIAN’S ORDERS AND SHIPPED DIRECTLY TO THE PATIENT’S RESIDENCE AS NEEDED.

ITEM INFORMATION

AMIA APD System , Rental

LOCAL STOCK NUMBER: 5C5479

COUTRY KIT + CELLULAR KIT MODEM AND POWER CONNECTIVITY FEE

LOCAL STOCK NUMBER: 5C5749

AMIA Automated PD System Carrying Case-Hard

LOCAL STOCK NUMBER: 5C9346

DIANEAL PD-2 Peritoneal Dialysis Solution 1.5% Dextrose, AMBUFLEX ll Container with yellow pull ring, 6000 mL

LOCAL STOCK NUMBER: L5B9710

DIANEAL Low Calcium Peritoneal Dialysis Solution 2.5% Dextrose, AMBU-FLEX ll Container with green pull ring, 6000 mL

LOCAL STOCK NUMBER: L5B9771

DIANEAL Low Calcium Peritoneal Dialysis Solution 4.25% Dextrose, AMBU-FLEX ll Container with red pull ring, 6000 mL

LOCAL STOCK NUMBER: L5B9772

DIANEAL PD-2 Peritoneal Dialysis Solution 1.5% Dextrose, ULTRABAG Container with yellow pull ring, 3000 mL

LOCAL STOCK NUMBER: 5B9857

DIANEAL Low Calcium Peritoneal Dialysis Solution 2.5% Dextrose, ULTRABAG Container with green pull ring, 2500 mL

LOCAL STOCK NUMBER: 5B9778P

DIANEAL PD-2 Peritoneal Dialysis Solution 1.5% Dextrose, ULTRABAG Container with yellow pull ring, 2500 mL

LOCAL STOCK NUMBER: 5B9868P

DIANEAL PD-2 Peritoneal Dialysis Solution 2.5% Dextrose, AMBUFLEX ll Container with green pull ring, 2000 mL

LOCAL STOCK NUMBER: L5B5177

DIANEAL PD-2 Peritoneal Dialysis Solution 4.25% Dextrose, ULTRABAG Container with red pull ring, 2000 mL

LOCAL STOCK NUMBER: 5B9896

EXTRANEAL (icodextrin) Peritoneal Dialysis Solution, AMBU-FLEX ll Container with purple pull ring, 2500 mL

LOCAL STOCK NUMBER: L5B4976

EXTRANEAL (icodextrin) Peritoneal Dialysis Solution, ULTRABAG Container with purple pull ring, 2000 mL

LOCAL STOCK NUMBER: 5B4984

15L Cycler Drainage Bag

LOCAL STOCK NUMBER: 5C4145NS

APD Drain Manifold

LOCAL STOCK NUMBER: 5C4512

MINICAPS DISCONNECT CAPS

LOCAL STOCK NUMBER: 5C4482

DIANEAL PD-2 Peritoneal Dialysis Solution 2.5% Dextrose, ULTRABAG Container with green pull ring, 3000 mL

LOCAL STOCK NUMBER: 5B9858

FLEXICAP Disconnect Cap with Povidone-Iodine Solution

LOCAL STOCK NUMBER: 5C4456

ULTRACLAMP Clamp

LOCAL STOCK NUMBER: 5C4957

MEDLINE Post-Op Gauze Sponges, 4" X 3", Non-Sterile

LOCAL STOCK NUMBER: 5K7525M

AVANT GAUZE Drain Sponges, 2" X 2", Non-Woven, Sterile

LOCAL STOCK NUMBER: 5K7458MM

MEDLINE Isolation Face Masks with Earloops

LOCAL STOCK NUMBER: 5K8070M

Liquid Soap Antimicrobial, 16 oz with pump

LOCAL STOCK NUMBER: 5K4070M

EXSEPT PLUS Skin Antiseptic, 500 mL

LOCAL STOCK NUMBER: 5K4066

Heating Pad-King Size, 3 Heat Setting

LOCAL STOCK NUMBER: 5K3961Z

I/V Pole Double Hook

LOCAL STOCK NUMBER: 5Q3810P

Spring Scale (5000 gm x 100 gm)

LOCAL STOCK NUMBER: 5K3582Z

DIGITAL BP UNIT WMED/LRG CUFF

LOCAL STOCK NUMBER: 5K3971Z

Scale-Adult with 1 1/2" Digital Display

LOCAL STOCK NUMBER: 5K3575Z

THERMOMETER DIGITAL

LOCAL STOCK NUMBER: 5K3572Z

FREE TRAINING PACKING TO UNIT ULTRA BAG OR AMBU FLUX

MINICAP DISCONNECT CAP

LOCAL STOCK NUMBER: EZPC4466

BETA-CAP Clamp

LOCAL STOCK NUMBER: 5K4500

ONE TIME OUTBOUND FRIEGHT FOR AMIA LEASE

COTTON TIP APPLICATOR

12 FT DRAIN EXTENSION SET

LOCAL STOCK NUMBER: 5C4480P

BULK ORDER NEW PATIENT

AMIA AUTOMATED PD SET WITH CASSETTE

LOCAL STOCK NUMBER: 5C5479

TEGADERM

LOCAL STOCK NUMBER: 201178

CURAD NITRILE GLOVES

LOCAL STOCK NUMBER: 5K7779M

Page 1 of Page 1 of

SECTION C - CONTRACT CLAUSES

C.1 52.212-4 CONTRACT TERMS AND CONDITIONS—COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (NOV 2023)

(a) Inspection/Acceptance. The Contractor shall only tender for acceptance those items that conform to the requirements of this contract. The Government reserves the right to inspect or test any supplies or services that have been tendered for acceptance. The Government may require repair or replacement of nonconforming supplies or reperformance of nonconforming services at no increase in contract price. If repair/replacement or reperformance will not correct the defects or is not possible, the Government may seek an equitable price reduction or adequate consideration for acceptance of nonconforming supplies or services. The Government must exercise its post-acceptance rights—

(1) Within a reasonable time after the defect was discovered or should have been discovered; and

(2) Before any substantial change occurs in the condition of the item, unless the change is due to the defect in the item.

(b) Assignment. The Contractor or its assignee may assign its rights to receive payment due as a result of performance of this contract to a bank, trust company, or other financing institution, including any Federal lending agency in accordance with the Assignment of Claims Act (31 U.S.C. 3727). However, when a third party makes payment (e.g., use of the Governmentwide commercial purchase card), the Contractor may not assign its rights to receive payment under this contract.

(c) Changes. Changes in the terms and conditions of this contract may be made only by written agreement of the parties.

(d) Disputes. This contract is subject to 41 U.S.C. chapter 71, Contract Disputes. Failure of the parties to this contract to reach agreement on any request for equitable adjustment, claim, appeal or action arising under or relating to this contract shall be a dispute to be resolved in accordance with the clause at Federal Acquisition Regulation (FAR) 52.233-1, Disputes, which is incorporated herein by reference. The Contractor shall proceed diligently with performance of this contract, pending final resolution of any dispute arising under the contract.

(e) Definitions. The clause at FAR 52.202-1, Definitions, is incorporated herein by reference.

(f) Excusable delays. The Contractor shall be liable for default unless nonperformance is caused by an occurrence beyond the reasonable control of the Contractor and without its fault or negligence such as, acts of God or the public enemy, acts of the Government in either its sovereign or contractual capacity, fires, floods, epidemics, quarantine restrictions, strikes, unusually severe weather, and delays of common carriers. The Contractor shall notify the Contracting Officer in writing as soon as it is reasonably possible after the commencement of any excusable delay, setting forth the full particulars in connection therewith, shall remedy such occurrence with all reasonable dispatch, and shall promptly give written notice to the Contracting Officer of the cessation of such occurrence.

(g) Invoice.

(1) The Contractor shall submit an original invoice and three copies (or electronic invoice, if authorized) to the address designated in the contract to receive invoices. An invoice must include—

(i) Name and address of the Contractor;

(ii) Invoice date and number;

(iii) Contract number, line item number and, if applicable, the order number;

(iv) Description, quantity, unit of measure, unit price and extended price of the items delivered;

(v) Shipping number and date of shipment, including the bill of lading number and weight of shipment if shipped on Government bill of lading;

(vi) Terms of any discount for prompt payment offered;

(vii) Name and address of official to whom payment is to be sent;

(viii) Name, title, and phone number of person to notify in event of defective invoice; and

(ix) Taxpayer Identification Number (TIN). The Contractor shall include its TIN on the invoice only if required elsewhere in this contract.

(x) Electronic funds transfer (EFT) banking information.

(A) The Contractor shall include EFT banking information on the invoice only if required elsewhere in this contract.

(B) If EFT banking information is not required to be on the invoice, in order for the invoice to be a proper invoice, the Contractor shall have submitted correct EFT banking information in accordance with the applicable solicitation provision, contract clause (e.g., 52.232-33, Payment by Electronic Funds Transfer—System for Award Management, or 52.232-34, Payment by Electronic Funds Transfer—Other Than System for Award Management), or applicable agency procedures.

(C) EFT banking information is not required if the Government waived the requirement to pay by EFT.

(2) Invoices will be handled in accordance with the Prompt Payment Act (31 U.S.C. 3903) and Office of Management and Budget (OMB) prompt payment regulations at 5 CFR part 1315.

(h) Patent indemnity. The Contractor shall indemnify the Government and its officers, employees and agents against liability, including costs, for actual or alleged direct or contributory infringement of, or inducement to infringe, any United States or foreign patent, trademark or copyright, arising out of the performance of this contract, provided the Contractor is reasonably notified of such claims and proceedings.

(i) Payment.—

(1) Items accepted. Payment shall be made for items accepted by the Government that have been delivered to the delivery destinations set forth in this contract.

(2) Prompt payment. The Government will make payment in accordance with the Prompt Payment Act (31 U.S.C. 3903) and prompt payment regulations at 5 CFR part 1315.

(3) Electronic Funds Transfer (EFT). If the Government makes payment by EFT, see 52.212-5(b) for the appropriate EFT clause.

(4) Discount. In connection with any discount offered for early payment, time shall be computed from the date of the invoice. For the purpose of computing the discount earned, payment shall be considered to have been made on the date which appears on the payment check or the specified payment date if an electronic funds transfer payment is made.

(5) Overpayments. If the Contractor becomes aware of a duplicate contract financing or invoice payment or that the Government has otherwise overpaid on a contract financing or invoice payment, the Contractor shall—

(i) Remit the overpayment amount to the payment office cited in the contract along with a description of the overpayment including the—

(A) Circumstances of the overpayment (e.g., duplicate payment, erroneous payment, liquidation errors, date(s) of overpayment);

(B) Affected contract number and delivery order number, if applicable;

(C) Affected line item or subline item, if applicable; and

(D) Contractor point of contact.

(ii) Provide a copy of the remittance and supporting documentation to the Contracting Officer.

(6) Interest.

(i) All amounts that become payable by the Contractor to the Government under this contract shall bear simple interest from the date due until paid unless paid within 30 days of becoming due. The interest rate shall be the interest rate established by the Secretary of the Treasury as provided in 41 U.S.C. 7109, which is applicable to the period in which the amount becomes due, as provided in (i)(6)(v) of this clause, and then at the rate applicable for each six-month period as fixed by the Secretary until the amount is paid.

(ii) The Government may issue a demand for payment to the Contractor upon finding a debt is due under the contract.

(iii) Final decisions. The Contracting Officer will issue a final decision as required by 33.211 if—

(A) The Contracting Officer and the Contractor are unable to reach agreement on the existence or amount of a debt within 30 days;

(B) The Contractor fails to liquidate a debt previously demanded by the Contracting Officer within the timeline specified in the demand for payment unless the amounts were not repaid because the Contractor has requested an installment payment agreement; or

(C) The Contractor requests a deferment of collection on a debt previously demanded by the Contracting Officer (see 32.607-2).

(iv) If a demand for payment was previously issued for the debt, the demand for payment included in the final decision shall identify the same due date as the original demand for payment.

(v) Amounts shall be due at the earliest of the following dates:

(A) The date fixed under this contract.

(B) The date of the first written demand for payment, including any demand for payment resulting from a default termination.

(vi) The interest charge shall be computed for the actual number of calendar days involved beginning on the due date and ending on—

(A) The date on which the designated office receives payment from the Contractor;

(B) The date of issuance of a Government check to the Contractor from which an amount otherwise payable has been withheld as a credit against the contract debt; or

(C) The date on which an amount withheld and applied to the contract debt would otherwise have become payable to the Contractor.

(vii) The interest charge made under this clause may be reduced under the procedures prescribed in FAR 32.608-2 in effect on the date of this contract.

(j) Risk of loss. Unless the contract specifically provides otherwise, risk of loss or damage to the supplies provided under this contract shall remain with the Contractor until, and shall pass to the Government upon:

(1) Delivery of the supplies to a carrier, if transportation is f.o.b. origin; or

(2) Delivery of the supplies to the Government at the destination specified in the contract, if transportation is f.o.b. destination.

(k) Taxes. The contract price includes all applicable Federal, State, and local taxes and duties.

(l) Termination for the Government's convenience. The Government reserves the right to terminate this contract, or any part hereof, for its sole convenience. In the event of such termination, the Contractor shall immediately stop all work hereunder and shall immediately cause any and all of its suppliers and subcontractors to cease work. Subject to the terms of this contract, the Contractor shall be paid a percentage of the contract price reflecting the percentage of the work performed prior to the notice of termination, plus reasonable charges the Contractor can demonstrate to the satisfaction of the Government using its standard record keeping system, have resulted from the termination. The Contractor shall not be required to comply with the cost accounting standards or contract cost principles for this purpose. This paragraph does not give the Government any right to audit the Contractor's records. The Contractor shall not be paid for any work performed or costs incurred which reasonably could have been avoided.

(m) Termination for cause. The Government may terminate this contract, or any part hereof, for cause in the event of any default by the Contractor, or if the Contractor fails to comply with any contract terms and conditions, or fails to provide the Government, upon request, with adequate assurances of future performance. In the event of termination for cause, the Government shall not be liable to the Contractor for any amount for supplies or services not accepted, and the Contractor shall be liable to the Government for any and all rights and remedies provided by law. If it is determined that the Government improperly terminated this contract for default, such termination shall be deemed a termination for convenience.

(n) Title. Unless specified elsewhere in this contract, title to items furnished under this contract shall pass to the Government upon acceptance, regardless of when or where the Government takes physical possession.

(o) Warranty. The Contractor warrants and implies that the items delivered hereunder are merchantable and fit for use for the particular purpose described in this contract.

(p) Limitation of liability. Except as otherwise provided by an express warranty, the Contractor will not be liable to the Government for consequential damages resulting from any defect or deficiencies in accepted items.

(q) Other compliances. The Contractor shall comply with all applicable Federal, State and local laws, executive orders, rules and regulations applicable to its performance under this contract.

(r) Compliance with laws unique to Government contracts. The Contractor agrees to comply with 31 U.S.C. 1352 relating to limitations on the use of appropriated funds to influence certain Federal contracts; 18 U.S.C. 431 relating to officials not to benefit; 40 U.S.C. chapter 37, Contract Work Hours and Safety Standards; 41 U.S.C. chapter 87, Kickbacks; 49 U.S.C. 40118, Fly American; and 41 U.S.C. chapter 21 relating to procurement integrity.

(s) Order of precedence. Any inconsistencies in this solicitation or contract shall be resolved by giving precedence in the following order:

(1) The schedule of supplies/services.

(2) The Assignments, Disputes, Payments, Invoice, Other Compliances, Compliance with Laws Unique to Government Contracts, and Unauthorized Obligations paragraphs of this clause;

(3) The clause at 52.212-5.

(4) Addenda to this solicitation or contract, including any license agreements for computer software.

(5) Solicitation provisions if this is a solicitation.

(6) Other paragraphs of this clause.

(7) The Standard Form 1449.

(8) Other documents, exhibits, and attachments

(9) The specification.

(t) [Reserved]

(u) Unauthorized Obligations.

(1) Except as stated in paragraph (u)(2) of this clause, when any supply or service acquired under this contract is subject to any End User License Agreement (EULA), Terms of Service (TOS), or similar legal instrument or agreement, that includes any clause requiring the Government to indemnify the Contractor or any person or entity for damages, costs, fees, or any other loss or liability that would create an Anti-Deficiency Act violation (31 U.S.C. 1341), the following shall govern:

(i) Any such clause is unenforceable against the Government.

(ii) Neither the Government nor any Government authorized end user shall be deemed to have agreed to such clause by virtue of it appearing in the EULA, TOS, or similar legal instrument or agreement. If the EULA, TOS, or similar legal instrument or agreement is invoked through an “I agree” click box or other comparable mechanism (e.g., “click-wrap” or “browse-wrap” agreements), execution does not bind the Government or any Government authorized end user to such clause.

(iii) Any such clause is deemed to be stricken from the EULA, TOS, or similar legal instrument or agreement.

(2) Paragraph (u)(1) of this clause does not apply to indemnification by the Government that is expressly authorized by statute and specifically authorized under applicable agency regulations and procedures.

(v) Incorporation by reference. The Contractor’s representations and certifications, including those completed electronically via the System for Award Management (SAM), are incorporated by reference into the contract.

(End of Clause) ADDENDUM to FAR 52.212-4 CONTRACT TERMS AND CONDITIONS—COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES Clauses that are incorporated by reference (by Citation Number, Title, and Date), have the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available.

The following clauses are incorporated into 52.212-4 as an addendum to this contract:

(End of Addendum to 52.212-4)

C.2 52.225-1 BUY AMERICAN—SUPPLIES (OCT 2022)

(a) Definitions. As used in this clause— Commercially available off-the-shelf (COTS) item—(1) Means any item of supply (including construction material) that is—

(i) A commercial product (as defined in paragraph (1) of the definition of ‘‘commercial product’’ at Federal Acquisition Regulation (FAR) 2.101;

(ii) Sold in substantial quantities in the commercial marketplace; and

(iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and

(2) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products.

Component means an article, material, or supply incorporated directly into an end product.

Cost of components means—

(1) For components purchased by the Contractor, the acquisition cost, including transportation costs to the place of incorporation into the end product (whether or not such costs are paid to a domestic firm), and any applicable duty (whether or not a duty-free entry certificate is issued); or

(2) For components manufactured by the Contractor, all costs associated with the manufacture of the component, including transportation costs as described in paragraph (1) of this definition, plus allocable overhead costs, but excluding profit. Cost of components does not include any costs associated with the manufacture of the end product.

Critical component means a component that is mined, produced, or manufactured in the United States and deemed critical to the U.S. supply chain. The list of critical components is at FAR 25.105.

Domestic end product means—

(1) For an end product that does not consist wholly or predominantly of iron or steel or a combination of both—

(i) An unmanufactured end product mined or produced in the United States;

(ii) An end product manufactured in the United States, if—

(A) The cost of its components mined, produced, or manufactured in the United States exceeds 60 percent of the cost of all its components, except that the percentage will be 65 percent for items delivered in calendar years 2024 through 2028 and 75 percent for items delivered starting in calendar year 2029. Components of foreign origin of the same class or kind as those that the agency determines are not mined, produced, or manufactured in sufficient and reasonably available commercial quantities of a satisfactory quality are treated as domestic. Components of unknown origin are treated as foreign. Scrap generated, collected, and prepared for processing in the United States is considered domestic; or

(B) The end product is a COTS item; or

(2) For an end product that consists wholly or predominantly of iron or steel or a combination of both, an end product manufactured in the United States, if the cost of foreign iron and steel constitutes less than 5 percent of the cost of all the components used in the end product. The cost of foreign iron and steel includes but is not limited to the cost of foreign iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the end product and a good faith estimate of the cost of all foreign iron or steel components excluding COTS fasteners. Iron or steel components of unknown origin are treated as foreign. If the end product contains multiple components, the cost of all the materials used in such end product is calculated in accordance with the definition of ‘‘cost of components’’.

End product means those articles, materials, and supplies to be acquired under the contract for public use.

Fastener means a hardware device that mechanically joins or affixes two or more objects together. Examples of fasteners are nuts, bolts, pins, rivets, nails, clips, and screws.

Foreign end product means an end product other than a domestic end product.

Foreign iron and steel means iron or steel products not produced in the United States. Produced in the United States means that all manufacturing processes of the iron or steel must take place in the United States, from the initial melting stage through the application of coatings, except metallurgical processes involving refinement of steel additives. The origin of the elements of the iron or steel is not relevant to the determination of whether it is domestic or foreign.

Predominantly of iron or steel or a combination of both means that the cost of the iron and steel content exceeds 50 percent of the total cost of all its components. The cost of iron and steel is the cost of the iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the product and a good faith estimate of the cost of iron or steel components excluding COTS fasteners.

Steel means an alloy that includes at least 50 percent iron, between 0.02 and 2 percent carbon, and may include other elements.

United States means the 50 States, the District of Columbia, and outlying areas.

(b) 41 U.S.C. chapter 83, Buy American, provides a preference for domestic end products for supplies acquired for use in the United States. In accordance with 41 U.S.C. 1907, the domestic content test of the Buy American statute is waived for an end product that is a COTS item (see 12.505(a)(1)), except that for an end product that consists wholly or predominantly of iron or steel or a combination of both, the domestic content test is applied only to the iron and steel content of the end product, excluding COTS fasteners.

(c) Offerors may obtain from the Contracting Officer a list of foreign articles that the Contracting Officer will treat as domestic for this contract.

(d) The Contractor shall deliver only domestic end products except to the extent that it specified delivery of foreign end products in the provision of the solicitation entitled "Buy American Certificate."

Alternate I (OCT 2022). As prescribed in 25.1101(a)(1)(ii) substitute the following sentence for the first sentence of paragraph (1)(ii)(A) of the definition of ‘‘domestic end product’’ in paragraph (a): (A) The cost of its components mined, produced, or manufactured in the United States exceeds ___ percent of the cost of all its components. [Contracting officer to insert the percentage.] (End of Clause) C.3 VAAR 852.211-76 LIQUIDATED DAMAGES – REIMBURSEMENT FOR DATA BREACH COSTS (FEB 2023) ALTERNATE I (FEB 2023)

(a) Definition. As used in this clause, ‘‘contract’’ means any contract, agreement, order or other instrument and encompasses the definition set forth in FAR 2.101.

(b) Non-disclosure requirements. As a condition of performance under a contract, order, agreement, or other instrument that requires access to sensitive personal information as defined in VAAR 802.101, the following is expressly required—

(1) The Contractor, subcontractor, their employees or business associates shall not, directly or through an affiliate or employee of the Contractor, subcontractor, or business associate, disclose sensitive personal information to any other person unless the disclosure is lawful and is expressly permitted under the contract; and

(2) The Contractor, subcontractor, their employees or business associates shall immediately notify the Contracting Officer and the Contracting Officer’s Representative (COR) of any security incident that occurs involving sensitive personal information.

(c) Liquidated damages. If the Contractor or any of its agents fails to protect VA sensitive personal information or otherwise engages in conduct which results in a data breach, the Contractor shall, in place of actual damages, pay to the Government liquidated damages of [$37.50] per affected individual in order to cover costs related to the notification, data breach analysis and credit monitoring. In the event the Contractor provides payment of actual damages in an amount determined to be adequate by the Contracting Officer, the Contracting Officer may forgo collection of liquidated damages.

(d) Purpose of liquidated damages. Based on the results from VA’s determination that there was a data breach caused by Contractor’s or any of its agents’ failure to protect or otherwise engaging in conduct to cause a data breach of VA sensitive personal information, and as directed by the Contracting Officer, the Contractor shall be responsible for paying to the VA liquidated damages in the amount of [$37.50] per affected individual to cover the cost of the following:

(1) Notification related costs.

(2) Credit monitoring reports.

(3) Data breach analysis and impact.

(4) Fraud alerts.

(5) Identity theft insurance.

(e) Relationship to termination clause, if applicable. If the Government terminates this contract in whole or in part under the Termination for cause paragraph, FAR 52.212–4(m), Contract Terms and Conditions—Commercial Products and Commercial Services, the Contractor is liable for damages accruing until the Government reasonably obtains delivery or performance of similar supplies or services. These damages are in addition to costs of repurchase as may be required under the Termination clause.

(End of Clause)

C.4 VAAR 852.232-72 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS (NOV 2018)

(a) Definitions. As used in this clause—

(1) Contract financing payment has the meaning given in FAR 32.001;

(2) Designated agency office means the office designated by the purchase order, agreement, or contract to first receive and review invoices. This office can be contractually designated as the receiving entity. This office may be different from the office issuing the payment;

(3) Electronic form means an automated system transmitting information electronically according to the accepted electronic data transmission methods and formats identified in paragraph (c) of this clause. Facsimile, email, and scanned documents are not acceptable electronic forms for submission of payment requests;

(4) Invoice payment has the meaning given in FAR 32.001; and

(5) Payment request means any request for contract financing payment or invoice payment submitted by the contractor under this contract.

(b) Electronic payment requests. Except as provided in paragraph (e) of this clause, the contractor shall submit payment requests in electronic form. Purchases paid with a Government-wide commercial purchase card are considered to be an electronic transaction for purposes of this rule, and therefore no additional electronic invoice submission is required.

(c) Data transmission. A contractor must ensure that the data transmission method and format are through one of the following:

(1) VA’s Electronic Invoice Presentment and Payment System at the current website address provided in the contract.

(2) Any system that conforms to the X12 electronic data interchange (EDI) formats established by the Accredited Standards Center (ASC) and chartered by the American National Standards Institute (ANSI).

(d) Invoice requirements. Invoices shall comply with FAR 32.905.

(e) Exceptions. If, based on one of the circumstances in this paragraph (e), the Contracting Officer directs that payment requests be made by mail, the Contractor shall submit payment requests by mail through the United States Postal Service to the designated agency office. Submission of payment requests by mail may be required for—

(1) Awards made to foreign vendors for work performed outside the United States;

(2) Classified contracts or purchases when electronic submission and processing of payment requests could compromise the safeguarding of classified or privacy information;

(3) Contracts awarded by contracting officers in the conduct of emergency operations, such as responses to national emergencies;

(4) Solicitations or contracts in which the designated agency office is a VA entity other than the VA Financial Services Center in Austin, Texas; or

(5) Solicitations or contracts in which the VA designated agency office does not have electronic invoicing capability as described above.

(End of Clause)

C.5 VAAR 852.242-71 ADMINISTRATIVE CONTRACTING OFFICER (OCT 2020)

The Contracting Officer reserves the right to designate an Administrative Contracting Officer (ACO) for the purpose of performing certain tasks/duties in the administration of the contract. Such designation will be in writing through an ACO Letter of Delegation and will identify the responsibilities and limitations of the ACO. A copy of the ACO Letter of Delegation will be furnished to the Contractor.

(End of Clause)

C.6 52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

https://www.acquisition.gov/browse/index/far https://www.va.gov/oal/library/vaar/

(End of Clause)

Page 1 of

Page 1 of

SECTION D - CONTRACT DOCUMENTS, EXHIBITS, OR ATTACHMENTS

See attached document: 36C24525Q0816 LineItems.

Page 1 of

Page 1 of

SECTION E - SOLICITATION PROVISIONS

E.1 52.204-24 REPRESENTATION REGARDING CERTAIN TELECOMMUNICATIONS AND VIDEO SURVEILLANCE SERVICES OR EQUIPMENT (NOV 2021) The Offeror shall not complete the representation at paragraph (d)(1) of this provision if the Offeror has represented that it ‘‘does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument’’ in paragraph (c)(1) in the provision at 52.204–26, Covered Telecommunications Equipment or Services—Representation, or in paragraph (v)(2)(i) of the provision at 52.212–3, Offeror Representations and Certifications–Commercial Products and Commercial Services. The Offeror shall not complete the representation in paragraph (d)(2) of this provision if the Offeror has represented that it ‘‘does not use covered telecommunications equipment or services, or any equipment, system, or service that uses covered telecommunications equipment or services’’ in paragraph (c)(2) of the provision at 52.204–26, or in paragraph (v)(2)(ii) of the provision at 52.212–3.

(a) Definitions. As used in this provision— Backhaul, covered telecommunications equipment or services, critical technology,…