RFQ 17A 250220-0182.pdf

State of Maine RFQ# 17A 250220*0182 Rev. 9/12/2024

STATE OF MAINE

DEPARTMENT OF ADMINISTRATIVE AND FINANCIAL SERVICES

OFFICE OF STATE PROCUREMENT SERVICES

RFQ # 17A 250220*0182

Foldable Traffic Cones

Quotations/Responses Due: Wednesday, March 5, 2025 not later than 4:00 p.m. local time

Questions Due Date: Monday, March 3, 2025

Note: All questions and responses must be provided via the State of Maine’s e-Procurement system: AdvantageME / Vendor Self Service (VSS).

General Instructions on Bidder Questions

It is the responsibility of each Bidder to examine the entire RFQ and to seek clarification by submitting questions through the Q & A List tab on the Solicitation page in the CGI Vendor Self Service (VSS). Any answers to questions will appear there as well. It is the vendor's responsibility to log in to view all questions and answers posted. Additional information obtained any other way will not be valid.

In the event that you must contact us for any other reasons than the Q & A previously mentioned, only the Buyer listed on the Solicitation page may be contacted from the time this RFQ is issued until award notification is made. No other person/State employee is empowered to make binding statements regarding this RFQ. Violation of this provision may lead to disqualification from the bidding process, at the State’s discretion.

Summary

For this competitive Request for Quotations (RFQ) process, the State of Maine Office of State Procurement Services (“OSPS”) is acting on behalf of the Department of Transportation (“Requesting Department”). OSPS and the Requesting Department seek quotations (also referred to as “bids” or “responses” herein) to provide the goods/services listed above. This document provides instructions and descriptions of requirements for this competitive process.

RFQ REQUIREMENTS

1. Description of Requirements

The following is a description of the goods and/or services sought by the State of Maine under this RFQ.

• Please see Appendix B

2. Bid Contents Requirements

In addition to the cost, delivery, and other information required in VSS, all bids should contain the following information as attachments, in the Appendices listed below:

• Appendix A: Bid Cover Page and Debarment Form

• Audit Report: If documents are electronically signed the bid must include an audit report from DocuSign or Adobe Sign.

• Appendix C: Cost Response

• Appendix D: Municipality Political Subdivision and School District Participation

Certification

• Appendix E: Master Agreement Vendor Information

• Quote on Company Letterhead – This document will be used to evaluate your bid, please make sure it covers all specified requirements for the requested items.

• Product Data/Information Sheets - This document will be used to evaluate your bid, please make sure it covers all specified requirements for the requested items.

• Warranty Information

3. Master Agreement Term

In addition to any mutually agreed upon delivery dates for purchases of goods, the contract resulting from this RFQ will have a term, or “Period of Performance”, during which the contract is considered to be in effect. The anticipated contract term is defined in the table below. Please note that the dates below are estimated and may be adjusted as necessary in order to comply with all procedural requirements associated with this RFQ and the contracting process. The actual contract start and end dates will be established by the completed and approved contract.

Contract Renewal: Following the initial term of the contract, OSPS, at their discretion, may opt to renew the contract for extension periods as defined below.

The term of the anticipated contract, resulting from this RFQ, is defined as follows:

Period Start Date End Date Initial Period of Performance April 1, 2025 March 31, 2027 Optional Extension Period #1 April 1, 2027 March 31, 2029 Optional Extension Period #2 April 1, 2029 March 31, 2030

4. Submitting a Quotation

• Quotations Due: Quotations must be received no later than 4:00 p.m. Eastern

Standard Time (EST), on the date listed in VSS. Quotations received after the 4:00 p.m. deadline will not be accepted.

• Submission Instructions: Bidders must submit their bids in the State of Maine’s electronic procurement system: Advantage “Vendor Self Service” (VSS). More information on this system can be found at the following internet link:

https://www.maine.gov/dafs/bbm/procurementservices/vendors/vendor-self-service-system

• Multiple Quotations: Unless specifically prohibited in Section 1 of this RFQ, Bidders are permitted to submit multiple quotations for this RFQ, offering alternative items or pricing for the State of Maine to consider in its best value determination.

• Withdrawal of a Quotation: Bidders are permitted to withdraw their own quotations up until the due date and time for receipt of quotations. To do so, a Bidder must enter the VSS system (as referenced above), identify and open their submitted quotation located in the Solicitation Responses tab, and click the “Withdraw” button found at the bottom of the screen. Quotations cannot be withdrawn after the due date and time for receipt of quotations.

• Attachments: Any attachments provided with the Advantage VSS bid submission must be in MS Word, MS Excel, or Adobe (.pdf) format, unless otherwise specified in Section 1 of this RFQ. Vendors are encouraged to submit supporting documentation that aid the requesting department in understanding how the bid conforms to the requirements. The VSS attachment file size limit is 2Mb. Please contact the buyer for this RFQ if you must submit attachment files larger than this.

• Vendor specifications: Unless otherwise stated in this RFQ document, limited specification information will be required upon submission of a bid in response to this RFQ. However, a Bidder’s response should include an affirmative statement that their bid complies with all requirements of this RFQ, unless the Bidder specifically addresses how its bid differs from the specifications, and why the differences should be deemed acceptable by the State.

5. General Instructions

• The Bidder must submit a cost quotation response that covers the goods and term of the contract, including any optional renewal.

• The cost quotation shall include the costs necessary for the Bidder to fully comply with the contract terms and conditions and RFQ requirements.

• Failure to provide the requested information may result in the exclusion of the quotation from consideration, at the discretion of OSPS.

• No costs related to the preparation of the quotation for this RFQ or to the negotiation of the contract with the Department may be included in the quotation.

• The State is exempt from the payment of Federal, State and local Taxes on articles not for resale. Please provide quotations that do not include these taxes. Upon application, an exemption certificate can be furnished by the State at the point of contract finalization.

https://www.maine.gov/dafs/bbm/procurementservices/vendors/vendor-self-service-system https://www.maine.gov/dafs/bbm/procurementservices/vendors/vendor-self-service-system

6. Quotation Evaluation and Selection

Evaluation of the submitted quotations shall be accomplished as detailed below:

• State of Maine RFQ documents are evaluated on a Best Value basis. The term

“Best Value” may take into consideration the qualities of the goods or services to be supplied, their conformity with the specifications listed in the RFQ, the purposes for which they are required, the date of delivery, and the best interest of the State.

Once the goods or services have been determined to conform to the specifications then OSPS will make its award decision based on the lowest price among the Bidders. Delivery days can be a factor in awarding.

• The State reserves the right to not make an award to the lowest price bidder when that bidder has had documented poor performance, and/or a contract terminated or not renewed within the last five years.

• At the discretion of OSPS, if a Bidder’s submission is deemed to not conform to the specifications listed in the RFQ, or otherwise not conform to the requirements of the RFQ, then that Bidder’s submission may not be considered for contract award.

• In the event that no Bidder submission conforms to the specifications of this RFQ, then OSPS may choose not to make any award. Alternatively, OSPS may make an award to the Best Value Bidder whose specifications most closely meet the specifications of this RFQ. For example, if there are five specification requirements, and two responses are received with one Bidder meeting four requirements, and one bidder meeting three requirements, then OSPS, at its discretion, may make a contract award to the Bidder meeting four requirements.

• If the specifications provided with this RFQ are of a technical nature, then OSPS’s RFQ Coordinator, at his or her discretion, may seek to use an evaluation team comprised of subject matter experts, end-users from the Requesting Department, or other State Department representatives. In such a case, the evaluation team will judge the merits of the quotations received in accordance with the best value criteria defined in the RFQ.

7. Negotiations

a. No Best and Final Offers: The State of Maine will not seek a best and final offer (BAFO) from any Bidder in this procurement process. All Bidders are expected to provide their Best Value pricing with the submission of their quotation.

b. OSPS reserves the right to negotiate with the successful Bidder to finalize a contract at the same rate or cost of goods and services as presented in the selected quotation. Such negotiations may not significantly vary the content, nature or requirements of the quotation or the RFQ to an extent that may affect the price of goods or services requested. OSPS reserves the right to terminate contract negotiations with a selected Bidder who submits a proposed contract significantly different from the quotation submitted in response to the RFQ.

c. In the event that an acceptable contract cannot be negotiated with the highest ranked Bidder, OSPS may withdraw its award and negotiate with the next-highest ranked Bidder, and so on, until an acceptable contract has been finalized.

Alternatively, OSPS may cancel the RFQ, at its sole discretion.

TERMS AND CONDITIONS FOR RFQ AND CONTRACT

PART I GENERAL INFORMATION ON RFQs

A. Purpose and Background

The State of Maine (“State”) Department of Administrative and Financial Services (“Department”), Office of State Procurement Services (“OSPS”) acts as the purchasing agent on behalf of all Executive Departments and other agencies within State Government. For this competitive Request for Quotations (RFQ) process, OSPS is acting on behalf of the Requesting Department listed on the cover page. OSPS and the Requesting Department seek quotations (also referred to as “bids” or “responses” herein) to provide the goods/services as defined above in Section 1 of this document. This document provides instructions for submitting quotations, the procedure and criteria by which the Bidder(s) will be selected, and the contractual terms which will govern the relationship between the State and the awarded Bidder(s). Following Bidder selection and upon reaching a mutual agreement, the State and the selected Bidder will enter into a contract – taking the form of a State of Maine Master Agreement or Buyer Purchase Order (all generally referred to as “contract” herein), as applicable.

B. General Provisions

1. Issuance of this RFQ does not commit OSPS or the Requesting Department to issue an award or to pay expenses incurred by a Bidder in the preparation of a response to this RFQ. This includes attendance at personal interviews or other meetings and software or system demonstrations, where applicable.

2. All responses to this RFQ should adhere to the instructions and format requirements outlined in this RFQ and all written supplements and amendments (such as OSPS’s answers to the Bidders’ questions submitted through the VSS), as issued by OSPS.

Responses are to follow the format and respond to all questions and instructions specified above in the “Submitting a Quotation” section of this RFQ.

3. Bidders shall take careful note that in evaluating a quotation submitted in response to this RFQ, the Department may consider materials provided in the quotation, information obtained through interviews/presentations (if any), and internal information of previous contract history between OSPS and the Bidder (if any). OSPS also reserves the right to consider other reliable references and publicly available information available in evaluating a Bidder’s experience and capabilities, if needed. All responses to this RFQ shall be considered to be authorized to legally bind the Bidder, and if selected for award, shall contain or be considered to contain a statement that the quotation and the pricing contained therein will remain valid and binding for a period of at least 180 days from the date and time of the bid opening.

4. The RFQ and the selected Bidder’s quotation, including all appendices or attachments, may be incorporated in the final contract.

5. Following announcement of an award decision, all submissions in response to this RFQ will be considered public records available for public inspection pursuant to the State of Maine Freedom of Access Act (FOAA) (1 M.R.S. §§ 401 et seq.).

http://www.mainelegislature.org/legis/statutes/1/title1sec401.html

6. OSPS, at its sole discretion, reserves the right to recognize and waive minor informalities and irregularities found in quotations received in response to this RFQ.

7. OSPS reserves the right to authorize other State Departments to use the contract(s) resulting from this RFQ, if it is deemed to be beneficial for the State to do so.

8. All applicable laws, whether or not herein contained, shall be included by this reference.

It shall be Bidder’s responsibility to determine the applicability and requirements of any such laws and to abide by them.

C. Eligibility to Submit Bids

Public agencies, private for-profit companies, and non-profit companies and institutions are invited to submit bids in response to State of Maine Requests for Quotations.

D. Delivery Terms

For the purchase of goods, OSPS and selected Bidder will decide upon a delivery date in accordance with the State’s requirements and the terms offered in the Bidder’s quotation.

Unless stated otherwise in Section 1 of this RFQ, all deliveries are expected with shipping terms of “Free on Board (FOB) – Destination”. The State intends for this to mean that all goods shall be priced in the bid response to include shipping charges, if any, to the State’s desired location. The “FOB – Destination” shipping term is also intended to mean that the State shall not bear any responsibility for the goods in question until the State takes possession of them at the destination point of delivery.

E. Alternate Bids and Approved Equals

When, in bid forms and specifications, an article or material is identified by using a trade name and catalog number of a manufacturer or vendor, the term “or approved equal,” if not inserted with the identification, is implied. Any Bidder that seeks to propose an alternate item from what is specified in this RFQ should refer to State of Maine Statute 5 MRSA §1825-B, for “Bids, awards and contracts”, found here:

http://www.mainelegislature.org/legis/statutes/5/title5sec1825-B.html

F. Appeal of Contract Awards

Any person aggrieved by the award decision that results from this RFQ may appeal the decision to the Director of the Bureau of General Services in the manner prescribed in 5 MRSA § 1825-E and 18-554 Code of Maine Rules, Chapter 120 (found here: Chapter 120). The appeal must be in writing and filed with the Director of the Bureau of General Services, 9 State House Station, Augusta, Maine, 04333-0009 within 15 calendar days of receipt of notification of contract award.

If this RFQ results in the creation of a pre-qualified or pre-approved list of vendors, then the appeal procedures mentioned above are available upon the original determination of that vendor list, but not during subsequent competitive procedures involving only the pre-qualified or pre-approved list participants.

http://www.mainelegislature.org/legis/statutes/1/title1sec401.html http://www.mainelegislature.org/legis/statutes/5/title5sec1825-B.html https://www.maine.gov/dafs/bbm/procurementservices/policies-procedures/chapter-120 https://www.maine.gov/dafs/bbm/procurementservices/policies-procedures/chapter-120

PART II CONTRACT ADMINISTRATION AND CONDITIONS

A. Contract Document

The successful Bidder will be required to execute a contract in the form of a State of Maine Buyer Purchase Order, Contract Agreement to Purchase Services or State of Maine Master Agreement.

The Terms and Conditions used with the aforementioned contract types may be found on the Office of State Procurement Services’ website at the following links:

BPO and MA Terms and Conditions

In the event that the State of Maine’s Standard Terms and Conditions or RFQ provisions do not otherwise cover contractual scenarios that are specific to the goods or services being purchased under this RFQ, then the State is willing to consider a Bidder’s standard terms and conditions. Consideration or use of a Bidder’s standard terms and conditions shall only occur under the general agreement that in the event of a conflict, the State of Maine’s Standard Terms and Conditions and RFQ provisions shall take precedence.

Other forms and contract documents commonly used by the State can be found on the Office of State Procurement Services’ website at the following link:

https://www.maine.gov/dafs/bbm/procurementservices/forms

B. Independent Capacity

In providing services and performing under the contract, the successful Bidder shall act independently and not as an agent of the State of Maine.

C. Payments and Other Provisions

The State anticipates paying the selected Bidder for goods and services received, on the basis of net 30 payment terms, upon the receipt of an accurate and acceptable invoice. An invoice will be considered accurate and acceptable if it contains a reference to the State of Maine contract number, contains correct pricing information relative to the contract, and provides any required supporting documents, as applicable, and any other specific and agreed-upon requirements listed within the contract that results from this RFQ.

The State of Maine reserves the right to pay for goods purchased through this solicitation by any of several available means, which include but may not be limited to check, EFT, and/or procurement card. Bidders are advised that state statute precludes sellers from imposing a surcharge on credit or debit card purchases (text follows):

“9-A MRSA §8-509 (1): A seller in a sales transaction may not impose a surcharge on a cardholder who elects to use a credit card or debit card in lieu of payment by cash, check or similar means.”

Appendix A

STATE OF MAINE

DEPARTMENT OF ADMINISTRATIVE AND FINANCIAL SERVICES

OFFICE OF STATE PROCUREMENT SERVICES

RFQ # 17A 250220*0182

Foldable Traffic Cones

BID COVER PAGE and DEBARMENT FORM

Bidder’s Organization Name:

Chief Executive - Name/Title:

Tel: Cell: E-mail:

Headquarters Street Address:

Headquarters City/State/Zip:

(provide information requested below if different from above) Lead Point of Contact for Bid - Name/Title:

Tel: Cell: E-mail:

Street Address:

City/State/Zip:

By signing below Bidder affirms:

• Their bid complies with all requirements of this RFQ;

• This bid and the pricing structure contained herein will remain firm for a period of 180 days from the date and time of the bid opening;

• That no personnel currently employed by the Department or any other State agency participated, either directly or indirectly, in any activities relating to the preparation of the Bidder’s proposal;

• That no attempt has been made or will be made by the Bidder to induce any other person or firm to submit or not to submit a proposal; and

• The undersigned is authorized to enter into contractual obligations on behalf of the above-named organization.

Name: Title:

To have your bid accepted, this Appendix MUST have an actual wet signature or utilize Docu Sign or Adobe Sign forms of electronic signature.

Authorized Signature: Date:

Debarment, Performance, and Non-Collusion Certification

By signing this document, I certify to the best of my knowledge and belief that the aforementioned organization, its principals, and any subcontractors named in this proposal:

a. Are not presently debarred, suspended, proposed for debarment, and declared ineligible or voluntarily excluded from bidding or working on contracts issued by any governmental agency.

b. Have not within three years of submitting the proposal for this contract been convicted of or had a civil judgment rendered against them for:

i. fraud or a criminal offense in connection with obtaining, attempting to obtain, or performing a federal, state or local government transaction or contract.

ii. violating Federal or State antitrust statutes or committing embezzlement, theft, forgery, bribery, falsification or destruction of records, making false statements, or receiving stolen property;

iii. are not presently indicted for or otherwise criminally or civilly charged by a governmental entity (Federal, State or Local) with commission of any of the offenses enumerated in paragraph (b) of this certification; and

iv. have not within a three (3) year period preceding this proposal had one or more federal, state or local government transactions terminated for cause or default.

c. Have not entered into a prior understanding, agreement, or connection with any corporation, firm, or person submitting a response for the same materials, supplies, equipment, or services and this proposal is in all respects fair and without collusion or fraud. The above-mentioned entities understand and agree that collusive bidding is a violation of state and federal law and can result in fines, prison sentences, and civil damage awards.

• Failure to provide this certification may result in the disqualification of the

Bidder’s proposal, at the discretion of the Department.

To the best of my knowledge all information provided in the enclosed proposal, both programmatic and financial, is complete and accurate at the time of submission.

Name: Title:

To have your bid accepted, this Appendix MUST have an actual wet signature or utilize Docu Sign or Adobe Sign forms of electronic signature.

Authorized Signature: Date:

Appendix B

DETAILED SPECIFICATIONS

The State reserves the right to not make an award to the low-cost bidder when the bidder has had documented poor performance and/or a contract terminated or not renewed within the last five years.

Equivalent Bid Items: Equivalent items may be bid; however all equivalent item bids MUST include documentation to prove equivalency. The final decision on equivalency will be determined by the requesting Department.

Required Documents: All bids must include the following documents. Bids received without them may be rejected.

• Appendix A: Bid Cover Page and Debarment Form

• Audit Report: If documents are electronically signed the bid must include an audit report from DocuSign or Adobe Sign.

• Appendix C: Cost Response

• Appendix D: Municipality Political Subdivision and School District Participation

Certification

• Appendix E: Master Agreement Vendor Information

• Quote on Company Letterhead – This document will be used to evaluate your bid, please make sure it covers all specified requirements for the requested items.

• Product Data/Information Sheets - This document will be used to evaluate your bid, please make sure it covers all specified requirements for the requested items.

• Warranty Information

Prices: Bid Price must be with shipping terms of “Free on Board (FOB) – Destination”. The State intends for this to mean that all goods shall be priced in the bid response to include shipping charges, if any, to the State’s desired location. The “FOB – Destination” shipping term is also intended to mean that the State shall not bear any responsibility for the goods in question until the State takes possession of them at the destination point of delivery.

Price and Rate Guarantee Period: All quoted prices and rates must be guaranteed for and must remain firm for minimally one year of the initial contract period. The State of Maine can request a price reduction at any time after the first twelve-month period of the contract period.

Price adjustment requests must be made by the vendor(s) at least sixty (60) days prior to the effective date. Requests for price increases must include sufficient documentation from the manufacture documenting the request is based on the vendor’s actual cost increases. Any approved price or rate adjustments must be held firm for minimally one year or the remainder of the contract period if there is less than one year remaining. The price adjustment will not go into effect until the contract amendment has been fully approved by the State of Maine.

Samples may be requested during bid evaluation for equivalent bid items. If samples are requested the bidder must provide the samples at no cost and they may not be returned. A specification sheet comparing the items bid to the items requested for equivalent bid items MUST be attached to the submitted bid in the VSS, if the specification sheet is not included the bid will be rejected. The final decision of equivalency will be determined by the requesting Department.

Deliveries: Most MaineDOT deliveries will be made to Augusta, Maine, the exact address will be provided to the selected vendor. Orders from other departments and agencies may be required to be shipped to any State of Maine facility.

The expected results of this bid process will be the creation of a single Master Agreement Contract (MA) to one vendor that will allow all State of Maine Departments and Agencies to purchase the listed items as needed. There is no guaranteed award.

The State reserves the right to add other similar items or commodities to the MA if it’s in the State’s best interest but does not obligate the State to purchase similar noncontracted items or commodities from the selected bidder.

Invoices and Payments The Contractor shall submit an itemized bill to the Department for materials following delivery for approval and payment. Invoices shall include the following minimum information:

Contractor name, address & Contract Number

Invoice Date & Number Dates of Delivery

The Department will pay based upon prices bid and the invoices provided and accepted.

No such payment will be made if, in the judgment of the Department, the Materials are not in accordance with the provisions of the Contract.

The Acceptance by the Contractor of the final payment, as evidenced by cashing of the final payment check, constitutes a release to the Department from all claims and liability under the Contract. Upon Final Acceptance, the Contractor is released from further obligation, except for warranty obligations provided for in this Contract.

Payments to the Contractor shall be full compensation for furnishing all labor, equipment, materials, services, and incidentals used to supply the materials under the Contract in a complete and acceptable manner, and for all risk, loss, damage, or expense of any kind arising from the nature or prosecution of the Work.

No payments due the Contractor will be adjusted for inflation. No interest shall be due and payable on any payment due the Contractor.

Dispute Resolution If, in the performance of this Agreement, there arises a dispute between the Contractor and MaineDOT that cannot be resolved by the parties to the Contract, the parties may agree to submit the dispute to non-binding Alternate Dispute Resolution. All disputes shall be governed by Maine law, and all actions shall be filed in the Kennebec Superior Court, in Augusta Maine.

Specifications

Conformity with Standards Unless otherwise provided in the contract, all materials shall conform to the following standards, as applicable.

A. MDOT

B. AASHTO

C. ASTM

D. AREMA

E. Standard conditions and special conditions contained in any permit F. Manual on Uniform Traffic Control Devices (MUTCD) G. American with Disabilities Act (ADA)

Material Quality Materials and manufactured products shall be new unless otherwise specified, free from defect, and in conformity with the contract. If there is no applicable standard set forth in this Contract for a particular item, then the item shall be in accordance with industry standards prevailing at the time of bid. The Department has the authority to inspect all Materials and every detail of the Work.

When material is fabricated or treated with another material or where any combination of materials is assembled to form a finished product, any or all of which are covered by specifications, the Department may reject the finished product if any of the components do not comply with the specifications. The Department may reject materials not con-forming to the Specifications at any time.

Material Specifications The Contractor shall provide and deliver High Density Polyethylene Foldable Cones per the below specifications:

High Density Polyethylene Foldable Cones (Set of 5)

• Lightweight - Each unit weighs 4 lbs.

• 28.5 Inches high

• Base at widest is 29 inches to provide stability (without added sandbags or other weighted devices)

• Hinges to fold

• Folds to just 1.5” wide

• Made of high-density polyethylene

• Rubber feet

• Replaceable connecting hinge

• Molded-in handles

• Reflective engineer-grade sheeting

• Dual white reflective stripes on each leg

• Installed retention band

• Sold in bags of 5

• Bags are included in the price.

• Metal disc at top to receive flashing lights with Magnetic bases (such as Pi-Lit and Road Commanders)

Self Certifying letter for meeting NCHRP 350 Category 1 device.

645.08 Method of Measurement

The High Density Polyethylene Foldable Cones will be measured by a Set which is comprised of five foldable cones and carrying case, complete and delivered to address above.

645.09 Basis of Payment

High Density Polyethylene Foldable Cones will be paid for at the contract unit price per set which payment shall be full compensation for furnishing and delivering all materials necessary including Five (5) High Density Polyethylene Foldable Cones and carrying cases.

Payment will be made under the following:

Description Pay Unit

High Density Polyethylene Foldable Cones Sets

Appendix C

COST RESPONSE

All responses to this RFQ will require a cost quotation response, in a format selected by the State of Maine. That format is described below.

Bid Prices will be with shipping terms of “Free on Board (FOB) – Destination”. The State intends for this to mean that all goods shall be priced in the bid response to include shipping charges, if any, to the State’s desired location. The “FOB – Destination” shipping term is also intended to mean that the State shall not bear any responsibility for the goods in question until the State takes possession of them at the destination point of delivery.

Description of Materials, Supplies, Equipment and Bid Price

Contractor _______________________________________

SCHEDULE OF ITEMS

The Department will reject bids if any one of the following occurs:

a) the Bid is not Delivered to the precise location and by the precise time set forth in the Notice to Contractors or any applicable Bid Amendment,

b) the Bid is not signed, or

c) the unit price for any item is not provided or is unreadable.

Do not make handwritten changes to the bid documents. The Bidder will have no opportunity to cure the above Non-curable Bid Defects. For clarification, questions, comments/recommendations use the “Request for Information” form as directed in the Bid Book instructions. For a related provision see Standard Specification, Section 102.11 – Bid Responsiveness.

Item Description Units Unit Price $/Per Set

High Density Polyethylene Foldable Cones Sets $

(Print Respondent’s Name and Title) Signature

All bids must be entered in the Vendor Self Service (VSS).

All bids must have a bid price (Unit Price). The price must be filled in using numbers and a decimal point only. For this bid process enter the total price for one (1) of each item.

Example: If you bid is for one dollar you would enter 1.00

All bid must have the estimated days from award of contract to receipt of unit (Delivery Days). This will be entered as CALENDAR DAYS. Only numbers can be entered.

Example: If you expect to be able to deliver the unit in two weeks you would enter 14

If you have any details you want us to know about your bid or the item you are bidding write them in the Comments section.

Appendix D

MUNICIPALITY POLITICAL SUBDIVISION and SCHOOL DISTRICT PARTICIPATION

CERTIFICATION

The Office of State Procurement Services is committed to providing purchasing opportunities for municipalities, political subdivisions and school districts in Maine by allowing them access, through our vendors, to our contract pricing. A bidder's willingness to extend contract pricing to these entities will be taken into consideration in making awards.

Orders from Municipality, Political Subdivisions and School Districts (Appendix D): If the bidder elects to permit Municipality, Political Subdivisions and School Districts to utilize the resulting Master Agreement Contract, The State of Maine will not be responsible for any order placed by these groups. All orders will originate from these groups and they will be liable for all payments.

Will you accept orders from political subdivisions and school districts in Maine at the prices quoted?

_____ Yes

_____ Yes, with conditions as follows:

______ No

Name of Company: __________________________________________________________

Address: ___________________________________________________________________

Signature: __________________________________________________________________

Printed Name: ______________________________________________________________

Date: ___________________________

Appendix E

MASTER AGREEMENT CONTRACT DOCUMENT VENDOR CONTACT INFORMATION

and MASTER AGREEMENT CONTACT DOCUMENT VENDOR SIGNER INFORMATION

This bid process will result in the creation of a Master Agreement Contract (MA) which will permit users to order contracted items as needed.

Ordering Procedures: Delivery Orders (DO) will be created in AdvantageME for all orders over $5000.00. If a DO is used, the DO will be emailed to the email address referenced on the MA as a .pdf file. Orders less than $5000.00 can be placed using a State of Maine issued P-Card (credit card).

Please provide the following information for the primary person users can contact to place orders less than $5000.00, follow up on orders and invoices:

Contact Person Name: _________________________________________________

Telephone: ______________________________________________

Email Address: ___________________________________________

The MA Documents will be emailed via DocuSign to be reviewed and signed, please provide the following information for the person who will sign the MA contract documents:

Contract Signer Name: ___________________________________________________

Title: _____________________________________________________

Email Address: _____________________________________________

August 05, 2022 Supersedes January 07, 2016

Page A - 1

APPENDIX A TO DIVISION 100

SECTION 1 - BIDDING PROVISIONS

A. Federally Required Certifications By signing and delivering a Bid, the Bidder certifies as provided in all certifications set forth in this Appendix A - Federal Contract Provisions Supplement including:

• Certification Regarding No Kickbacks to Procure Contract as provided on this page 1 below.

• Certification Regarding Non-collusion as provided on page 1 below.

• Certification Regarding Non-segregated Facilities as provided by FHWA Form 1273, section

III set forth on page 21 below.

• "Certification Regarding Debarment, Suspension, Ineligibility and Voluntary Exclusion" as provided by FHWA Form 1273, section XI set forth on page 32 below.

• "Certification Regarding Use of Contract Funds for Lobbying" as provided by FHWA Form

1273, section XII set forth on page 35 below.

Unless otherwise provided below, the term "Bidder”, for the purposes of these certifications, includes the Bidder, its principals, and the person(s) signing the Bid. Upon execution of the Contract, the Bidder (then called the Contractor) will again make all the certifications indicated in this paragraph above.

CERTIFICATION REGARDING NO KICKBACKS TO PROCURE CONTRACT Except expressly stated by the Bidder on sheets submitted with the Bid (if any), the Bidder hereby certifies, to the best of its knowledge and belief, that it has not:

(A) employed or retained for a commission, percentage, brokerage, contingent fee, or other consideration, any firm or person (other then a bona fide employee working solely for

me) to solicit or secure this contract;

(B) agreed, as an express or implied condition for obtaining this contract, to employ or retain the services of any firm or person in connection with carrying out the contract, or;

C) paid, or agreed to pay, to any firm, organization, or person (other than a bona fide employee working solely for me) any fee, contribution, donation, or consideration of any kind for, or in connection with, procuring or carrying out the contract;

By signing and submitting a Bid, the Bidder acknowledges that this certification is to be furnished to the Maine Department of Transportation and the Federal Highway Administration, U.S. Department of Transportation in connection with this contract in anticipation of federal aid highway funds and is subject to applicable state and federal laws, both criminal and civil.

CERTIFICATION REGARDING NONCOLLUSION Under penalty of perjury as provided by federal law (28 U.S.C. §1746), the Bidder hereby certifies, to the best of its knowledge and belief, that:

Page A - 2 the Bidder has not, either directly or indirectly, entered into any agreement, participated in any collusion, or otherwise taken any action in restraint of competitive bidding in connection with the Contract.

For a related provisions, see Section 102.7.2 (C) of the Standard Specifications - "Effects of Signing and Delivery of Bids" - "Certifications", Section 3 of this Appendix A entitled "Other Federal Requirements" including section XI - "Certification Regarding Debarment, Suspension, Ineligibility, and Voluntary Exclusion" and section XII. - "Certification Regarding Use of Contract Funds for Lobbying."

B. Bid Rigging Hotline To report bid rigging activities call: 1-800-424-9071

The U.S. Department of Transportation (DOT) operates the above toll-free “hotline” Monday through Friday, 8:00 a.m. to 5:00 p.m., eastern time. Anyone with knowledge of possible bid rigging, bidder collusion, or other fraudulent activities should use the “hotline” to report such activities.

The “hotline” is part of the DOT’s continuing effort to identify and investigate highway construction contract fraud and abuse and is operated under the direction of the DOT Inspector General. All information will be treated confidentially and caller anonymity will be respected.

SECTION 2 - FEDERAL EEO AND CIVIL RIGHTS REQUIREMENTS

Unless expressly otherwise provided in the Bid Documents, the provisions contained in this Section 2 of this "Federal Contract Provisions Supplement" are hereby incorporated into the Bid Documents and Contract.

A. Nondiscrimination & Civil Rights - Title VI The Contractor and its subcontractors shall not discriminate on the basis of race, color, national origin, or sex in the performance of this Contract. The Contractor shall carry out applicable requirements of 49 CFR Part 26 in the award and administration of DOT assisted contracts. Failure by the Contractor to carry out these requirements is a material breach of this contract, which may result in the termination of this contract or such other remedy as the Department deems appropriate. The Contractor and subcontractors shall comply with Title VI of the Civil Rights Act of 1964, as amended, and with all State of Maine and other Federal Civil Rights laws.

For related provisions, see Subsection B - "Nondiscrimination and Affirmative Action - Executive Order 11246" of this Section 2 and Section 3 - Other Federal Requirements of this "Federal Contract Provisions Supplement" including section II - "Nondiscrimination" of the “Required Contract Provisions, Federal Aid Construction Contracts”, FHWA-1273.

B. Nondiscrimination and Affirmative Action - Executive Order 11246 Pursuant to Executive Order 11246, which was issued by President Johnson in 1965 and amended in 1967 and 1978, this Contract provides as follows.

The Contractor shall take specific affirmative actions to ensure equal employment opportunity. The evaluation of the Contractor’s compliance with these specifications shall be

Page A - 3 based upon its efforts to achieve maximum results from its actions. The Contractor shall document these efforts fully, and shall implement affirmative action steps at least as extensive as the following:

Ensure and maintain a working environment free of harassment, intimidations, and coercion at all sites, and in all facilities at which the Contractor’s employees are assigned to work.

The Contractor, where possible, will assign two or more women to each construction project. The Contractor shall specifically ensure that all forepersons, superintendents, and other on-site supervisory personnel are aware of and carry out the Contractor’s obligation to maintain such a working environment, with specific attention to minority or female individuals working at such sites or in such facilities.

Establish and maintain a current list of minority and female recruitment sources, provide written notification to minority and female recruitment sources and to community organizations when the Contractor or its union have employment opportunities available, and to maintain a record of the organization’s responses.

Maintain a current file of the names, addresses and telephone numbers of each minority and female off-the-street applicant and minority or female referral from a union, a recruitment source or community organization and of what action was taken with respect to each such individual. If such individual was sent to the union hiring hall for referral and was not referred back to the Contractor by the union or, if referred, not employed by the Contractor, this shall be documented in the file with the reason therefore, along with whatever additional actions the Contractor may have taken.

Provide immediate written notification to the Department’s Civil Rights Office when the union or unions with which the Contractor has a collective bargaining agreement has not referred to the Contractor a minority person or woman sent by the Contractor, or when the Contractor has other information that the union referral process has impeded the Design-Builder’s efforts to meet its obligations.

Develop on-the-job training opportunities and/or participate in training programs for the area which expressly include minorities and women, including upgrading programs and apprenticeship and trainee programs relevant to the Contractor’s employment needs, especially those programs funded or approved by the Department of Labor. The Contractor shall provide notice of these programs to the sources compiled under B above.

Disseminate the Contractor’s EEO policy by providing notice of the policy to unions and training programs and requesting their cooperation in assisting the Contractor in meeting its EEO obligation; by including it in any policy manual and collective bargaining agreement; by publicizing it in the company newspaper, annual report, etc.; by specific review of the policy with all management personnel and with all minority and female employees at least once a year; and by posting the company EEO policy on bulletin boards accessible to all employees at each location where construction work is performed.

Review, at least annually, the company’s EEO policy and affirmative action obligations under these specifications with all employees having any responsibility for hiring, Page A - 4 assignment, layoff, termination, or other employment decisions including specific review of these items with on-site supervisory personnel such as Superintendents, General Forepersons, etc., prior to the initiation of construction work at any job site. A written record shall be made and maintained identifying the time and place of these meetings, persons attending, subject matter discussed, and disposition of the subject matter.

Disseminate the Contractor’s EEO policy externally by including it in any advertising in the news media, specifically including minority and female news media, and providing written notification to and discussing the Contractor’s EEO policy with other Contractor’s and Subcontractors with whom the Contractor does or anticipates doing business.

Direct its recruitment efforts, both orally and written to minority, female and community organizations, to schools with minority and female students and to minority and female recruitment and training organizations serving the Contractor’s recruitment area and employment needs. Not later that one month prior to the date for the acceptance of applications for apprenticeship or other training by any recruitment source, the Contractor shall send written notification to organizations such as the above describing the openings, screenings, procedures, and test to be used in the selection process.

Encourage present minority and female employees to recruit other minority persons and women and, where reasonable, provide after school, summer and vacation employment to minority and female youth, both on the site and in other areas of a Contractor’s workforce.

Validate all tests and other selection requirements.

Conduct, at least annually, an inventory and evaluation at least of all minority and female personnel for promotional opportunities and encourage these employees to seek or to prepare for, through appropriate training, etc., such opportunities.

Ensure that seniority practices, job classifications, work assignments and other personnel practices, do not have a discriminatory effect by continually monitoring all personnel and employment related activities to ensure that the EEO policy and the Contractor’s obligations under these specifications are being carried out.

Ensure that all facilities and company activities are non segregated except that separate or single-user toilet and necessary changing facilities shall be provided to assure privacy between the sexes.

Document and maintain a record of all solicitations of offers for subcontracts from minority and female construction Contractor’s and suppliers, including circulation of solicitations to minority and female Contractor associations and other business associations.

Conduct a review, at least annually, of all supervisors’ adherence to and performance under the Contractor’s EEO policies and affirmative action obligations.

Page A - 5

C. Goals for Employment of Women and Minorities Per Executive Order 11246, craft tradesperson goals are 6.9% women and .5% minorities employed. However, goals may be adjusted upward at the mutual agreement of the Contractor and the Department. Calculation of these percentages shall not include On-the-Job Training Program trainees, and shall not include clerical or field clerk position employees.

For a more complete presentation of requirements for such Goals, see the federally required document “Goals for Employment of Females and Minorities” set forth in the next 6 pages below.

Start of GOALS FOR EMPLOYMENT OF FEMALES AND MINORITIES Federally Required Contract Document

§60-4.2 Solicitations

(d) The following notice shall be included in, and shall be part of, all solicitations for offers and bids on all Federal and federally assisted construction contracts or subcontracts in excess of $10,000 to be performed in geographical areas designated by the Director pursuant to §60-4.6 of this part (see 41 CFR 60-4.2(a)):

Notice of Requirement for Affirmative Action to Ensure Equal Opportunity (Executive Order

11246)

1. The Offeror's or bidder's attention is called to the "Equal Opportunity Clause" and the "Standard Federal Equal Employment Specifications" set forth herein.

2. The goals and timetables for minority and female participation, expressed in percentage terms for the Contractor's aggregate work force in each trade on all construction work in the covered area, are as follows:

Goals for female participation in each trade 6.9%

Goals for minority participation for each trade Maine 001 Bangor, ME 0.8% Non-SMSA Counties (Aroostook, Hancock, Penobscot, Piscataquis, Waldo, Washington)

002 Portland-Lewiston, ME SMSA Counties: 4243 Lewiston-Auburn, ME 0.5% (Androscoggin)

6403 Portland, ME 0.6% (Cumberland, Sagadahoc)

Non-SMSA Counties: 0.5% (Franklin, Kennebec, Knox, Lincoln, Oxford, Somerset, York)

Page A - 6

These goals are applicable to all the Contractor's construction work (whether or not it is Federal or federally assisted) performed in the covered area. If the contractor performs construction work in a geographical area located outside of the covered area, it shall apply the goals established for such geographical area where the work is actually performed. With regard to this second area, the contractor also is subject to the goals for both its federally involved and non federally involved construction.

The contractor's compliance with the Executive Order and the regulations in 41 CFR Part

60-4 shall be based on its implementation of the Equal Opportunity Clause, specific affirmative action obligations required by the specifications set forth in 41 CFR 60-4.3(a), and its efforts to meet the goals. The hours of minority and female employment and training must be substantially uniform throughout the length of the contract, and in each trade, and the contractor shall make a good faith effort to employ minorities and women evenly on each of its projects.