RFQ 13464 Tower Climbing Safety Rescue and Rigging Training.pdf
PDF 518 KB Posted
- Solicitation number
- BPM013505
- Issued by
- San Diego County, California
About this file
This Request for Quotes (RFQ) 13464 is issued by the County of San Diego, Sheriff's Office, Wireless Services Division, seeking a qualified contractor to provide tower climbing safety, rescue, and competent rigging training for seven Sheriff's technicians. The training shall consist of a minimum of twenty-four instructional hours delivered over three consecutive business days (Tuesday through Thursday, 7:00 AM to 3:00 PM), with at least sixteen hours dedicated to tower climbing safety and rescue and eight hours to competent rigging instruction. The course will combine classroom instruction, practical hands-on exercises, written evaluation, and documented skills evaluation. Training will be conducted at the Sheriff's Technology and Information Center (STIC) tower located at 5577 Overland Avenue, San Diego, CA 92123, or another County-approved location within San Diego County. Offerors must submit questions by November 30, 2026, prior to 5:00 p.m., and quotes are due December 17, 2026, prior to 5:00 p.m. The contract term shall be for the period from award through completion and County acceptance of all deliverables, with Contractor required to provide training within ninety calendar days after award. The contracting officer is Patricia Arana, Assistant Procurement Specialist, with contact information provided in the RFQ.
The pricing shall be firm and fixed on a per-course basis for seven students, inclusive of all direct and indirect administration fees, travel, meals, accommodations, and all compensation for instruction and materials development. No additional charges are permitted. Offerors must provide detailed pricing through a completed Payment Schedule exhibit. The County reserves the right to award a contract, withhold information regarding the procurement until after negotiations are complete, separately procure similar services, and determine whether services can be provided more economically by an independent contractor. No set-asides are indicated in this solicitation. Contractor must maintain commercial general liability insurance with limits of $2,000,000 per occurrence, automobile liability of $1,000,000, workers' compensation as required by California, and professional liability of $2,000,000 per occurrence. Additional requirements include submission of required forms (PC600 Offeror's Cover Page, PC601 Representations and Certifications, PC610 Small-Local Business Self-Certification), compliance with County policies and applicable standards (OSHA, ANSI/ASSP, ASME, NATE), and submission of instructor resumes, course outlines, sample certificates, and equipment lists for County approval at least two weeks prior to training.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REQUEST FOR QUOTES (RFQ) 13464
COUNTY OF SAN DIEGO – SHERIFF’S OFFICE
TOWER CLIMBING, SAFETY, RESCUE AND RIGGING TRAINING
November 19, 2026
A. KEY INFORMATION
1. The County of San Diego is seeking quotes from firms interested in providing Tower Climbing, Safety, Rescue and Rigging Training (“Offerors”).
2. The County anticipates a contract term of three days.
3. The County has posted this solicitation on its official BuyNet website at https://sdbuynet.sandiegocounty.gov/ . To see all information related to this RFQ, to submit Questions, and to receive notifications of updates, Offerors must select “Participate in RFx” for this solicitation in BuyNet.
4. The Contracting Officer for this solicitation is Patricia Arana, Assistant Procurement Specialist, email patricia.arana@sdcounty.ca.gov
5. Schedule: This timeline is subject to change at any time, at the County’s sole discretion. The County will issue an addendum for changes to the Questions due date, or Quote due date.
Event Description Date and Time (San Diego Time) Questions due November 30, 2026 prior to 5:00 p.m.
Quotes due December 17, 2026 prior to 5:00 p.m.
6. Questions:
6.1. Offerors should submit all Questions, including requests for clarification related to definition or interpretation of this RFQ, in writing by the Date and Time specified in the Schedule. Offerors should submit Questions via BuyNet, by sending a message to the Contracting Officer through the “Discussions” functionality.
6.2. Non-Offerors should direct inquiries regarding this solicitation to the Contracting Officer.
7. Table of Contents:
A. Key Information B. RFQ Instructions and Rules C. Submittal Items D. Required Forms E. Statement of Work F. Payment Schedule G. Draft Agreement
B. RFQ INSTRUCTIONS AND RULES
1. INSTRUCTIONS FOR SUBMITTING A QUOTE
1.1. It is Offeror’s responsibility to submit a quote based on the most current RFQ, addenda thereto, County’s responses to
Questions, any other information posted on BuyNet, and any diligence material made available by the County. Offerors are advised to regularly check BuyNet for information. The County has no obligation to contact Offerors directly with any such RFQ-related information.
1.1.1. To see all information related to this RFQ, to submit Questions, and to receive notifications of updates, Offerors must select “Participate in RFx” for this solicitation in BuyNet.
MAGGIE RAMSBERGER
INTERIM DIRECTOR
DEPARTMENT OF PURCHASING AND CONTRACTING
5560 OVERLAND AVENUE, SUITE 270, SAN DIEGO, CALIFORNIA 92123-1204
PHONE (858) 505-6367 FAX (858) 715-6452
BRENDA G. MILLER
ASSISTANT DIRECTOR
https://sdbuynet.sandiegocounty.gov/ mailto:patricia.arana@sdcounty.ca.gov
COUNTY OF SAN DIEGO – REQUEST FOR QUOTATIONS (RFQ) 13464
TOWER CLIMBING, SAFETY, RESCUE SERVICES AND COMPETENT RIGGING TRAINING COURSE
1.1.2. If an Offeror is unable to download this document, an Offeror may request a hard copy from Department of
Purchasing and Contracting’s front desk or contact clerical support at (858) 505-6367.
1.2. Forms required to be submitted with Offerors response to this RFQ are included in this RFQ or posted on the County’s web site at: https://www.sandiegocounty.gov/content/sdc/purchasing/purchasing-forms.html.
1.2.1. The County may update posted forms from time to time. Unless otherwise specified, Offerors may submit the version of a form in place as of the date of the posting of this RFQ or any later version thereof.
1.3. Offeror must submit a complete original quote in accordance with the format provided in this solicitation to the County of
San Diego, Department of Purchasing and Contracting, through electronic upload to BuyNet before the Date and Time listed in Schedule.
1.3.1. If Offeror is unable to submit via BuyNet for any reason, Offeror may submit its quote via email to the Contracting
Officer listed in this document or provide the Purchasing and Contracting front desk with either (i) electronic files on CD/DVD; or, (ii) a printed quote. Offeror must prominently mark such submissions with the RFQ number on the outside of the packaging. Please use this method only if unable to submit through BuyNet.
2. QUESTIONS
2.1. Offerors shall direct requests for explanation regarding the RFQ or related documents to the Contracting Officer, in writing, as a question (“Question”). Offerors may submit Questions by sending a message to the Contracting Officer through the “Discussions” functionality in BuyNet.
2.2. The County may choose not to respond to Questions received after the date and time stated in the Schedule for Question submission. Offeror is responsible for ensuring that Questions are received by the County.
3. QUOTE FORMAT
3.1. Submit electronic quotes as files in .pdf format, except where specified otherwise. For pages other than signature pages, converted and searchable formats are preferred.
3.2. All quotes shall be signed with a handwritten signature by an authorized officer or employee of Offeror.
4. QUOTE ORGANIZATION
4.1. Your quote should be organized in accordance with the Submittal Items in this RFQ.
4.1.1. Offerors shall organize content to correspond to the applicable exhibit and question or item within each exhibit.
4.1.2. Offerors shall separate each exhibit into one or more files, clearly named as to the exhibit and order.
4.1.3. Pages shall be consecutively numbered within each exhibit at the bottom or top margin of each page.
4.1.4. Cost/Price information:
4.1.4.1. Offerors must place all cost and pricing information within the Cost/Price exhibit. Price shall be inclusive of all proposed compensation.
4.2. Confidential/Proprietary information:
4.2.1. The County is a public agency subject to the California Public Records Act, Government Code § 7920.000, et seq. Some or all of the documents submitted in response to this RFQ may be subject to disclosure, and the County intends to publish any resulting contracts to its public website.
4.2.2. It is Offeror’s responsibility to identify and separate into a “CONFIDENTIAL/PROPRIETARY” exhibit and to provide a signed Nondisclosure Indemnification Agreement for:
4.2.2.1. All confidential information that Offeror represents, with legal basis, is exempt from disclosure pursuant to the California Public Records Act, including PI (Personal Information), PII (Personally Identifiable Information), or PHI (Protected Health Information);
4.2.2.2. Any proprietary or other information Offeror represents, with legal basis, is exempt from disclosure under the California Public Records Act and wishes to protect from disclosure.
4.2.3. The “CONFIDENTIAL/PROPRIETARY” exhibit must be clearly labeled with all pages marked as
“CONFIDENTIAL/PROPRIETARY.”
4.2.4. Offeror should reference material in the “CONFIDENTIAL/PROPRIETARY” exhibit where it is needed to respond to a Submittal Item through citation to the “CONFIDENTIAL/PROPRIETARY” exhibit (for example “See response 1 contained within the ‘CONFIDENTIAL/PROPRIETARY’ exhibit for staff Social Security numbers”).
4.2.5. If the County determines that a submission improperly designates information as confidential or proprietary, the County may, at its sole discretion: (i) deem the information releasable; (ii) declare the submission non-conforming/non-responsive; (iii) remove such information, or (iv) take any other appropriate action. (Note:
Pricing and Terms and Conditions are generally not confidential under the California Public Records Act).
https://www.sandiegocounty.gov/content/sdc/purchasing/purchasing-forms.html
TOWER CLIMBING, SAFETY, RESCUE SERVICES AND COMPETENT RIGGING TRAINING COURSE
5. QUOTE EVALUATION
5.1. Evaluations may consider factors such as technical merit, experience, capacity, history of Offeror compliance, availability, price, and more to determine the quote(s) that provide the best value to the County.
5.2. During evaluation, the County may appropriately consider the sustainability and social, human health, environmental, and economic impact of Offeror’s proposed products and/or approach to providing goods and/or services, in accordance with Board Policy B-67. Therefore, Offerors are encouraged to include relevant information in their quotes, to the degree related to the goods or services sought.
5.3. During evaluation, the County may appropriately evaluate the cultural competency of Offeror and Offeror’s proposed approach to providing goods and services. Therefore, Offerors are encouraged to include relevant information in their quotes, to the degree related to the goods or services sought.
5.4. When evaluating an Offeror’s cost or pricing, the County may also consider the effect of the quote on the overall total cost to the County.
6. COUNTY COMMITMENT
6.1. This RFQ does not commit the County to award a contract, nor does it commit the County to pay any of Offeror’s costs incurred in the preparation or submission of the quote. Further, Offeror shall not incur any reimbursable cost in anticipation of a contract award.
6.2. Neither Offeror nor any of its representatives shall have any claims whatsoever against the County or any of its respective officials, agents, or employees arising out of or relating to this RFQ or these procedures (other than those arising under a definitive contract with Offeror in accordance with the terms thereof).
6.3. The County reserves the right to separately procure the same or similar goods or services.
6.4. The County may withhold all information regarding this procurement until after negotiations are complete, including, but not limited to: the number of quotes received; the identity of Offeror(s); the content of quotes; the County’s evaluation and results thereof. Information releasable after the conclusion of negotiations is subject to the disclosure requirements and withholding exemptions of the California Public Records Act.
6.5. Pursuant to County Charter §§ 703.10 and 916, award of a contract resulting from this RFQ may be subject to the County’s requirement to determine that the services can be provided more economically and efficiently by an independent contractor than by persons employed in the Classified Service.
6.6. In the event that an Offeror is involved in a merger, acquisition, or other change in control, the County reserves the right to award a contract to a resulting entity.
7. DILIGENCE AND DUTY TO INQUIRE
7.1. Should Offeror find discrepancies in or omissions from, or be in doubt as to the meaning of, the RFQ or related documents, Offeror shall have a duty to submit a Question to the County.
7.2. Offerors are expected to perform reasonable due diligence with regard to this RFQ and the work required, including, but not limited to, information that is publicly or otherwise reasonably available and, if applicable, information that can be obtained during a site visit (including verification of measurements, conditions, and other attributes). Neither the selected Offeror(s), nor any Offerors, shall be entitled to any price adjustment or other relief based upon information that was discovered or should have been discovered through due diligence.
7.3. The County makes no representation or warranty, express or implied, as to the accuracy or completeness of any diligence material or other information provided by the County or any of its agents, representatives, contractors, or consultants. Such information may reflect good faith assumptions, estimates, or projections, which may or may not prove to be correct.
7.4. Offeror should not rely upon oral statements made or explanations given by the County, including any oral responses to Questions or other inquiries. No prior, current, or post award communication(s) with any officer, agent, or employee of the County shall affect or modify any terms or requirements of this RFQ, except as explicitly provided for in this RFQ.
8. OFFEROR COMMUNICATIONS
8.1. All communications from Offeror (including its employees, agents, and representatives) to the County or its officers and employees (including consultants working on or assisting with this procurement), related to this RFQ or Offeror’s quote, must be directed in writing exclusively to the Contracting Officer, unless otherwise authorized in writing by the Contracting Officer. Offerors shall not communicate with or attempt to contact any other County personnel about this solicitation, except as otherwise allowed for in this RFQ or by law. Any improper contact may, at the County’s sole discretion, cause Offeror to be removed from consideration for contract award.
8.2. If Offeror issues any public announcement or otherwise engages in communication that, in the County’s sole determination, compromises the integrity of this RFQ process or attempts to restrain competition, Offeror may be removed from consideration for award.
8.3. Audio and/or video recording of presentations, discussions, negotiations, or other communications with the County regarding this RFQ are prohibited, unless specifically authorized in writing by the Contracting Officer.
TOWER CLIMBING, SAFETY, RESCUE SERVICES AND COMPETENT RIGGING TRAINING COURSE
9. SOLICITING EMPLOYEES
9.1. Until contract award, Offerors shall not, directly or indirectly, solicit any employee of the County to leave the County’s employ in order to accept employment with Offeror, its affiliates, actual or prospective contractors, or any person acting in concert with Offeror without prior written approval of the County’s Contracting Officer. This paragraph does not prevent the employment by Offeror of a County employee who has initiated contact with Offeror.
10. PROHIBITED CONTRACTS AND SUBCONTRACTS
10.1. In accordance with Section 67 of the San Diego County Administrative Code, the County shall not contract with, and shall reject any quote submitted by, the person or entities specified below, unless the Board of Supervisors finds that special circumstances exist which justify the approval of such contract:
10.1.1. Persons employed by the County or of public agencies for which the Board of Supervisors is the governing body;
10.1.2. Profit-making firms or businesses in which employees described in subsection 11.1.1 serve as officers, principals, partners, or major shareholders;
10.1.3. Persons who, within the immediately preceding twelve (12) months, came within the provisions of subsection
11.1.1 and who (i) were employed in positions of substantial responsibility in the area of service to be performed by the contract; or, (ii) participated in any way in developing the contract or its service specifications; and
10.1.4. Profit-making firms or businesses in which the former employees described in subsection 11.1.3 serve as officers, principals, partners, or major shareholders.
10.2. Per Board Policy A-79, a successful Offeror that is a non-profit corporation shall not subcontract any work under the agreement with a related for-profit subcontractor where an interlocking directorate, management, or ownership relationship exists, unless specifically authorized by the Board of Supervisors.
10.3. Offeror certifies that, if awarded a contract under this RFQ, such contract will be in compliance with Sections 11.1 and
11.2 above. Offeror shall promptly notify the County of any change in circumstance affecting these provisions.
11. CALIFORNIA REVENUE & TAXATION CODE § 18662
11.1. In compliance with California Revenue and Taxation Code § 18662, if Offeror is a non-resident of California (out-of-state invoices) that receives California source income and has not completed Franchise Tax Board Form 590, there may be a backup withholding on all payments. Fifteen (15) business days prior to the first payment from the County, new suppliers or suppliers with expired forms or forms with incorrect information must submit new forms to the County (forms are available from the Franchise Tax Board website listed below).
11.2. Under certain circumstances, Offerors may be eligible for reduced or waived nonresident withholding. If Offeror has already received a waiver or a reduced withholding response from the State of California and the response remains valid, Offeror should submit the response to the County in lieu of the forms. Failure to submit the required forms will result in withholding of payments. Offerors should access the Franchise Tax Board websites, listed below, for tax forms and relevant information regarding non-resident withholding, including waivers or reductions. The County will not give Offerors any tax advice. It is recommended that Offerors speak with their tax advisers and/or the State of California for guidance.
Franchise Tax Board Websites:
https://www.ftb.ca.gov https://www.ftb.ca.gov/forms/search/
11.3. If selected for award, Offeror must submit applicable forms to the Auditor & Controller via fax, at (858) 694-2060, or mail originals to: County of San Diego, 5530 Overland Avenue, Suite 410, San Diego, CA 92123. The P.O. Number or Contract Number (if available) and “California Revenue and Taxation Code § 18662” must appear on fax cover sheet and/or the outside of the mailing envelope.
12. W-9 FORM
12.1. If selected for award, Offeror must complete and submit a W-9 form if a current form is not on file with the County.
13. PREVAILING WAGE
RESERVED
https://www.ftb.ca.gov/ https://www.ftb.ca.gov/forms/search/
TOWER CLIMBING, SAFETY, RESCUE SERVICES AND COMPETENT RIGGING TRAINING COURSE
C. SUBMITTAL ITEMS
Offeror’s response to these Submittal Items shall be no more than five (5) pages. The attachments are additional supportive documentation to the quotation narrative itself and not an extension of the quotation narrative.
1. EXHIBIT 1 - REQUIRED FORMS
1.1 Submit a completed and signed Offeror’s Cover Page (PC600) form
• Required for all Offerors
• located at:
https://www.sandiegocounty.gov/content/dam/sdc/purchasing/docs/PC600_dpc_Offerors_Cover_Page.pdf
1.2 Submit a completed and signed Representations and Certifications form (PC601)
• Required for all Offerors
• located at:
https://www.sandiegocounty.gov/content/dam/sdc/purchasing/docs/PC601_dpc_Reps_and_Certs.pdf
1.3 Submit a completed and signed Small-Local Business Self-Certification Form (PC610)
• All Offerors are encouraged to complete this form to support County data collection.
• located at:
https://www.sandiegocounty.gov/content/dam/sdc/purchasing/docs/PC610_dpc_Small_Local_Self_Cert.pdf
1.4 Submit a completed and signed Nondisclosure Indemnification Agreement (PC620) (if applicable).
• Required if submitting Confidential/Proprietary Information (see RFQ Instructions and Rules section 4.2)
• located at:
https://www.sandiegocounty.gov/content/dam/sdc/purchasing/docs/PC620_dpc_Nondisclosure_Indemnity.pdf
2. EXHIBIT 2 - PROGRAM/TECHNICAL EXHIBIT
2.1 Confirm (YES/NO) your agreement to Exhibit A – Statement of Work (SOW). If “NO,” using the Statement of Work Word document (attached), provide the alternate language (deletions and insertions) that would make the SOW acceptable to the Offeror’s organization.
Yes ☐ No ☐
2.2 Describe your technical approach to meet the requirements outlined in the SOW. Include in the description:
2.2.1 Details of the activities to be performed and to fulfill each required training component (tower climbing safety, fall protection, rescue methods, competent rigging instruction, hands-on practical evaluations)
2.2.2 The applicable personnel who will be assigned to perform services for each task outlined in the SOW, identifying whether the stated service will be performed by your firm or one of your subcontractors.
2.2.3 Description of your approach to delivering a vendor‑neutral, standards‑aligned training program meeting OSHA, ANSI/ASSP, ASME, and industry best practices
2.2.4 Explanation of how your proposed training approach ensures safe, effective tower climbing, rescue readiness, and rigging competency for County technicians.
3. OFFEROR AND OFFEROR’S PERSONNEL EXPERIENCE AND CAPACITY
3.1 Offeror’s Experience:
3.1.1 Provide a list of tower‑safety, fall‑protection, rescue, and/or competent‑rigging training service contracts that your firm has conducted in the past five (5) years that are of similar scope to the County’s requirements. For each contract, include:
3.1.1.1 Customer (business) name
3.1.1.2 Project name and brief description of services provided (e.g., tower climbing safety training, rescue training, rigging instruction, hands-on practical skills evaluation)
3.1.2 Provide at least three (3) references for customers your firm has provided same/similar tower climbing or technical‑rescue training services to within the past five (5) years and of similar scope to the County’s requirements. Please do NOT use County of San Diego staff as a reference. In no more than one (1) page per reference, provide the following:
https://www.sandiegocounty.gov/content/dam/sdc/purchasing/docs/PC600_dpc_Offerors_Cover_Page.pdf https://www.sandiegocounty.gov/content/dam/sdc/purchasing/docs/PC601_dpc_Reps_and_Certs.pdf https://www.sandiegocounty.gov/content/dam/sdc/purchasing/docs/PC610_dpc_Small_Local_Self_Cert.pdf https://www.sandiegocounty.gov/content/dam/sdc/purchasing/docs/PC620_dpc_Nondisclosure_Indemnity.pdf
TOWER CLIMBING, SAFETY, RESCUE SERVICES AND COMPETENT RIGGING TRAINING COURSE
3.1.2.1 Name and title of reference
3.1.2.2 Reference contact information (address, phone number & email)
3.1.2.3 Reference company/organization name & purpose
3.1.2.4 A summary narrative of the applicable work provided, including the contract objectives and results; fee and contract term, any problems encountered, and resolutions reached. Explain how any experience gained could be beneficially applied to the County’s current needs for tower climbing safety, rescue, and competent rigging training
4. TECHNICAL APPROACH
4.1 Confirm (YES/NO) your agreement to Exhibit A – Statement of Work (SOW). If “NO,” using the Statement of Work Word document (attached), provide the alternate language (deletions and insertions) that would make the SOW acceptable to the Offeror’s organization.
4.2 Describe your technical approach to meet the requirements outlined in the SOW. Include in the description:
4.2.1 Details of the activities to be performed and to fulfill each required training component (tower climbing safety, fall protection, rescue methods, competent rigging instruction, hands-on practical evaluations)
4.2.2 The applicable personnel who will be assigned to perform services for each task outlined in the SOW, identifying whether the stated service will be performed by your firm or one of your subcontractors.
4.2.3 Description of your approach to delivering a vendor‑neutral, standards‑aligned training program meeting OSHA, ANSI/ASSP, ASME, and industry best practices
4.2.4 Explanation of how your proposed training approach ensures safe, effective tower climbing, rescue readiness, and rigging competency for County technicians.
4.3 Equivalent curricula will be accepted when the Contractor demonstrates compliance with the performance, content, standards, and evaluation requirements stated in this Statement of Work.
4.4 Contractor shall submit with quotation: course compliance statement/crosswalk, proposed outline and schedule, instructor qualifications, class-size and site requirements, equipment list, and sample certificate.
4.4.1 Contractor shall submit with its quotation instructor resumes or biographies, relevant instructor credentials, a proposed course outline, sample certificate, proposed class schedule, instructor-to-student ratio, and a statement identifying how the proposed course meets each requirement of this Statement of Work.
4.5 Offeror’s Personnel Experience:
4.5.1 Provide names and titles for all personnel who will be assigned to perform the required tower climbing safety, fall protection, rescue, and rigging training services, outlining their roles and responsibilities during classroom and hands-on components.
4.5.2 Provide resumes for the personnel assigned to perform the training services, outlining the pertinent years of experience conducting tower climbing, rescue, and rigging training; field experience in telecommunications towers or comparable at-height environments; Instructor credentials, certifications, and relevant technical qualifications
4.5.3 The intent is to obtain a vendor-neutral, industry-recognized course. Course names and credential titles may vary by Contractor.
4.5.4 Contractor shall submit site, structure, anchor, equipment, and weather requirements with its quotation. Final practical exercises shall be adjusted, as necessary, to the County-approved training structure without reducing the required learning objectives.
4.6 Confirm (Yes/No) if your organization proposes utilizing subcontractors to perform any portion of the training services listed in the Statement of Work.
4.6.1 If “Yes,” for each subcontractor proposed, provide the following:
4.6.1.1 Subcontract business name
4.6.1.2 The subcontractor’s portion of the SOW services (e.g., rescue instruction, rigging instruction, hands-on tower practicals) that will be performed
TOWER CLIMBING, SAFETY, RESCUE SERVICES AND COMPETENT RIGGING TRAINING COURSE
4.6.1.3 A summary narrative of the previous applicable work related to tower climbing safety, rescue, and rigging training requirements
4.7 Subcontractor’s Experience:
4.7.1 Provide a list of same/similar training contracts that your subcontractor has conducted in the past 5 years.
For each contract, list the following details:
4.7.1.1 Customer (business) name
4.7.1.2 Project name and brief description of services provided
4.7.2 Provide at least one (1) reference for customers that your subcontractor has provided same/similar tower climbing or technical‑rescue training services to within the past five (5) years and of similar scope to the County’s requirements. Please do NOT use County of San Diego staff as a reference. In no more than one (1) page per reference, provide the following:
4.7.2.1 Name and title of reference
4.7.2.2 Reference contact information (address, phone number & email)
4.7.2.3 Reference company/organization name & purpose
4.7.2.4 A summary narrative of the applicable work provided, including the contract objectives and results; fee and contract term, any problems encountered, and resolutions reached. Explain how any experience gained could be beneficially applied to the County’s current needs for tower climbing safety, rescue, and competent rigging training.
5. EXHIBIT 3 - COST/PRICE EXHIBIT
5.1 Submit a completed Payment Schedule
6. EXHIBIT 4 – ACCEPTANCE OF TERMS AND CONDITIONS
6.1 Confirm acceptance “YES/NO” of the County of San Diego’s Draft Agreement (including insurance requirements):
YES ☐ NO ☐
5.1.1 If “NO,” provide a detailed list of exceptions to the terms and conditions, the nature of its concern, and what terms the Offeror is willing to accept. Do not provide a copy of the Offeror’s standard contract to the County. The County will use its draft agreement in any negotiations with the Offeror. The Offeror will be deemed to have accepted any terms and conditions to which it does not take exception in its proposal, and such accepted terms and conditions will not be subject to further negotiation.
7. EXHIBIT 5 – CONFIDENTIAL PROPRIETARY
6.1 Include any Confidential/Proprietary Information in this exhibit, in accordance with RFQ Instructions and Rules section 4.2
D. REQUIRED FORMS
(RESERVED)
TOWER CLIMBING, SAFETY, RESCUE SERVICES AND COMPETENT RIGGING TRAINING COURSE
E. STATEMENT OF WORK
1. Overview
1.1 The County of San Diego (County), Sheriff's Office, Wireless Services Division (WSD), has a requirement for seven (7) Sheriff’s technicians to attend an instructor-led training course covering tower climbing safety, fall protection, tower rescue, and competent rigging for telecommunications structures. The Contractor shall provide training that combines classroom instruction, practical hands-on exercises, written evaluation, and documented skills evaluation.
1.2 The complete course shall consist of a minimum of twenty-four (24) instructional hours delivered over three (3) days. The tower climbing safety and rescue portion shall include a minimum of sixteen (16) hours, and the competent rigging portion shall include a minimum of eight (8) hours. The Contractor may recommend an equivalent sequencing of classroom and field activities, subject to prior approval by the Contracting Officer’s Representative (COR), provided all minimum hours, learning objectives, and practical evaluations are satisfied.
2. General Requirements
2.1 The Contractor shall provide classroom training before or in conjunction with practical hands-on training. Training shall be instructor-led and conducted in person.
2.2 The County shall provide a training room for classroom instruction at 5575 Overland Ave., San Diego, CA 92123.
2.2.1 Contractor shall provide all proposed training materials, course outlines, written examinations, skills-evaluation criteria, and equipment lists to the COR for review and approval no later than two (2) weeks prior to training.
2.2.2 Training materials provided shall be retained by the Sheriff.
2.2.3 Contractor shall provide each student with course materials in printed or electronic format suitable for future reference.
2.3 Practical hands-on training shall be conducted at the Sheriff’s Technology and Information Center (STIC) tower (150ft tall with 2 Climbing Ladders and Safety Climbs) located at 5577 Overland Ave., San Diego, CA 92123, or at another County-approved location within San Diego County.
2.3.1 Contractor shall provide all rescue and rigging equipment, training loads, ropes, slings, blocks, pulleys, connectors, hoisting devices, tag lines, and other specialized equipment needed to safely conduct the hands-on training and evaluations. All Contractor-provided equipment shall be suitable for the intended use, inspected before use, and compliant with applicable manufacturer requirements and industry standards.
2.3.2 The climbing equipment and personal protective equipment (PPE) for all students will be provided by the Sheriff.
Contractor shall review the student equipment before use and shall identify any equipment that is incompatible with the training or visibly unsuitable for service.
2.4 The training shall be exclusive only to Sheriff's employees. Contractor shall not bring students/participants outside the Sheriff.
2.5 The training shall be conducted Tuesday through Thursday, 7:00 AM to 3:00 PM San Diego time, excluding County observed holidays.
2.6 Contractor shall be escorted by a County employee at all times while on County premises.
2.7 Contractor shall maintain an instructor-to-student ratio appropriate for safe supervision of all elevated, rescue, and rigging exercises. The ratio shall not exceed eight (8) students per instructor during practical training unless the Contractor provides additional qualified instructors and the COR approves the proposed ratio.
2.8 Contractor shall stop or modify practical training when weather, site conditions, equipment condition, student performance, or another hazard makes continuation unsafe. Any postponed practical activity shall be rescheduled and completed at no additional cost to the County unless otherwise approved in writing by the County.
3. Specific Requirements
3.1 Tower Climbing Safety and Rescue Training
3.1.1 The tower climbing safety and rescue portion shall include classroom instruction and practical hands-on tower climbing and rescue exercises totaling a minimum of sixteen (16) instructional hours.
3.1.2 Classroom instruction shall include, at a minimum:
3.1.2.1 Applicable federal regulations, consensus standards, industry guidance, roles, responsibilities, and terminology for authorized and competent climbers/rescuers
3.1.2.2 Fall-protection hierarchy, managed fall-protection programs, and 100% attachment requirements
3.1.2.3 Pre-climb planning, job hazard analysis/job safety analysis, site-specific rescue planning, and emergency response coordination
3.1.2.4 Recognition and mitigation of common telecommunications-tower hazards, including environmental, structural, electrical, radio-frequency, dropped-object, and work-positioning hazards
TOWER CLIMBING, SAFETY, RESCUE SERVICES AND COMPETENT RIGGING TRAINING COURSE
3.1.2.5 Selection, inspection, care, maintenance, compatibility, and limitations of harnesses, connectors, lanyards, vertical and horizontal lifelines, ladder safety systems, self-retracting devices, work-positioning systems, descent devices, ropes, pulleys, and rescue equipment
3.1.2.6 Anchorage selection, anchorage connectors, fall clearance, swing-fall hazards, arresting forces, and equipment load ratings
3.1.2.7 Ropes, knots, hitches, mechanical advantage, progress capture, load sharing/equalization, and off-weighting techniques used for rescue
3.1.2.8 Suspension intolerance/trauma recognition, prompt rescue considerations, and post-rescue emergency actions
3.1.2.9 Selection and development of rescue methods for foreseeable tower configurations and work locations
3.1.3 Practical instruction and evaluation shall require each student, to the extent safely applicable to the training structure, to demonstrate:
3.1.3.1 Pre-use inspection, donning, adjustment, and proper use of fall-protection and rescue equipment
3.1.3.2 Safe ascent, descent, transition, work positioning, and maintenance of continuous fall protection
3.1.3.3 Selection and installation of appropriate anchorages and anchorage connectors
3.1.3.4 Controlled descent and self-rescue techniques
3.1.3.5 At least two (2) companion-rescue methods or scenarios, which may include lower-from-above, ground-based rescue, pick-off rescue, cross-haul, skate-block, raising/hauling, or other techniques appropriate to the County’s tower
3.1.3.6 Use of knots, descent devices, pulley systems, mechanical advantage, progress capture, and load equalization
3.1.3.7 Execution of a documented rescue plan, including communications, scene control, equipment selection, casualty management, and transfer to emergency medical services
3.2 Competent Rigging Training
3.2.1 The competent rigging portion shall include a minimum of eight (8) instructional hours and shall include both classroom instruction and practical hands-on rigging and hoisting exercises applicable to telecommunications towers and appurtenances.
3.2.2 Rigging instruction shall include, at a minimum:
3.2.2.1 Applicable Occupational Safety and Health Administration (OSHA) Occupational Safety and Health Administration requirements and current industry standards for construction, alteration, maintenance, and rigging of communications structures
3.2.2.2 Roles and responsibilities of authorized riggers, competent riggers, qualified persons, lift directors, hoist operators, and other affected personnel, as applicable to the work
3.2.2.3 Rigging plans, construction plans, job hazard analysis/job safety analysis, lift classifications, critical lifts, emergency planning, and required documentation
3.2.2.4 Inspection, selection, compatibility, use, care, storage, removal-from-service criteria, and capacity markings for synthetic and wire-rope slings, shackles, hooks, blocks, pulleys, ropes, connectors, hoists, capstans, winches, tag lines, anchors, and related hardware
3.2.2.5 Capstan-hoist types and configurations; manufacturer instructions; rated capacity and duty limitations; pre-use inspection; mount and anchorage selection; rope type, diameter, condition, compatibility, and number of wraps; block selection; rigging configuration; operator and tailer positioning; load control; safe starting, stopping, raising, and lowering; communications; emergency actions; and hazards associated with capstan-hoist operation
3.2.2.6 Working load limit, minimum breaking strength, design factor, center of gravity, load control, dynamic loading, shock loading, and effects of sling, block, bridle, and guy angles
3.2.2.7 Basic load, force, mechanical-advantage, vector-force, and rigging-capacity calculations
3.2.2.8 Hoisting-system setup; anchor and attachment selection; load-path verification; edge protection; tag-line use; exclusion/drop zones; and prevention of uncontrolled movement
3.2.2.9 Communication methods, standard hand signals, radio communication, stop-work authority, and coordination among personnel
3.2.2.10 Recognition of conditions that require review or direction by a qualified person or qualified engineer
3.2.2.11 Safe raising, positioning, and lowering of representative telecommunications loads such as antennas, dishes, transmission lines, tool bags, mounts, or structural components
3.2.3 Capstan-hoist instruction shall include practical hands-on setup and operation. Each student shall demonstrate or actively participate in inspection of the hoist, rope, mount, anchorage, blocks, and associated rigging; selection of a compatible rope and rigging arrangement; secure mounting and anchoring; establishment of communications and exclusion controls; correct application and management of rope wraps; safe operator and tailer positioning;
controlled raising, holding, stopping, and lowering of a representative load; and response to foreseeable abnormal or
TOWER CLIMBING, SAFETY, RESCUE SERVICES AND COMPETENT RIGGING TRAINING COURSE
emergency conditions. Training shall address the types of capstan hoists used at communications sites and shall not be limited to one manufacturer or model.
3.2.4 Practical rigging instruction and evaluation shall require students, individually or in small teams, to inspect equipment, select appropriate components, calculate or verify anticipated loads, develop or interpret a rigging plan, establish communications and exclusion controls, assemble a mechanical hoisting system that includes a capstan hoist, and safely raise, control, position, and lower a representative load.
3.2.5 The practical exercise shall include identification and correction of foreseeable rigging hazards or improper configurations. Contractor shall evaluate each student’s ability to recognize when a planned operation exceeds the student’s training, authority, equipment limitations, manufacturer instructions, or available engineering information.
3.3 Standards and Regulatory Alignment
3.3.1 Training shall be based on the current editions of applicable federal and California occupational-safety requirements and nationally recognized consensus standards in effect on the date of training, including, as applicable:
3.3.1.1 Recognition 29 CFR Parts 1910 and 1926 requirements applicable to telecommunications work, fall protection, training, rescue, material handling, and rigging, including 29 CFR 1910.268, 1910.140, 1926.21, 1926.251, and 1926.500 through 1926.503
3.3.1.2 American National Standards Institute (ANSI) / American Society of Safety Professionals (ASSP) Z359 Fall Protection and Fall Restraint standards applicable to the course content
3.3.1.3 ANSI/ASSP Z490.1 criteria for accepted practices in safety, health, and environmental training
3.3.1.4 ANSI/ASSP A10.48, Safety Requirements for Construction, Demolition, Modification and Maintenance of Communication Structures
3.3.1.5 Applicable American Society of Mechanical Engineers (ASME) B30 rigging and hoisting standards
3.3.1.6 Current recognized communications-industry climber training and safety practices, including applicable National Association of Tower Erectors (NATE) guidance or an equivalent industry standard
3.3.2 If a cited standard is superseded, renumbered, or replaced before the training date, Contractor shall train to the current applicable requirement and identify the change in the course materials. References to standards establish minimum subject matter and performance requirements and do not require affiliation with, endorsement by, or certification from any specific trade association or training provider.
3.4 Contractor and Instructor Qualifications
3.4.1 Contractor shall have demonstrated experience providing tower climbing, fall-protection, rescue, and rigging training to telecommunications, utility, public-safety, or comparable at-height workforces.
3.4.2 Each instructor shall possess documented knowledge, training, and practical experience sufficient to teach and evaluate the assigned subjects. At least one on-site instructor shall have a minimum of three (3) years of relevant field experience in telecommunications tower climbing/rescue and rigging, or equivalent experience acceptable to the County.
3.5 Evaluation, Records, and Certification
3.5.1 Successful completion shall require attendance for all instructional hours, a passing score on a written knowledge evaluation, and satisfactory demonstration of required practical skills. Contractor shall state its passing criteria in the submitted training materials.
3.5.2. Contractor shall document each student’s practical skills evaluation and shall identify any student who does not successfully demonstrate a required skill. Contractor shall provide nopportunity for corrective coaching and one re-evaluation during the scheduled course when it can be accomplished safely and without reducing required instruction.
3.5.3. Upon successful completion, each Sheriff’s technician shall receive certificates and/or wallet cards documenting completion of the tower climbing safety/rescue and competent rigging training. Credentials shall be valid for a minimum of twenty-four (24) months unless a shorter period is required by a controlling law or standard.
3.5.4. Certificates shall identify the student, Contractor, course title(s), training dates, expiration date or recommended retraining date, instructor, and standards addressed. Contractor shall provide the COR with an electronic roster, copies of certificates, written examination results, and practical skills-evaluation records within ten (10) business days after course completion.
TOWER CLIMBING, SAFETY, RESCUE SERVICES AND COMPETENT RIGGING TRAINING COURSE
3.5.5. Training completion documentation does not, by itself, constitute the County’s designation of an employee as a competent person or qualified person. Such designation remains the responsibility of the employer based on training, knowledge, experience, demonstrated ability, and assigned authority.
3.6 Schedule and Coordination
3.6.1 Contractor shall provide the complete training within ninety (90) calendar days after award, unless another schedule is approved in writing by the COR.
3.6.2 Contractor shall coordinate training dates, daily agenda, site access, equipment needs, and practical exercises with the COR. The Contractor shall provide at least two (2) proposed date options when requested by the COR.
3.6.3 Training should be conducted on three (3) consecutive business days. The COR may approve nonconsecutive dates when needed for operational scheduling, instructor availability, weather, or safe completion of practical exercises.
4. Contractor Deliverables
4.1 Contractor shall submit at least two (2) weeks before training: final course materials, examinations, skills-evaluation criteria, daily agenda, instructor roster, equipment list, and site requirements for COR approval
4.2 Contractor shall provide during training: all instructors, specialized rescue and rigging equipment, student materials, examinations, practical exercises, supervision, and skills evaluations required by this Statement of Work.
4.3 Contractor shall provide within ten (10) business days after training: completion roster, certificates/wallet cards, examination results, practical skills-evaluation records, and identification of any incomplete or unsuccessful student requirements.
Invoicing/Payment
San Diego County Sheriff’s Office Wireless Services Division 5595 Overland Ave, Suite 101 San Diego, CA. 92123
TOWER CLIMBING, SAFETY, RESCUE SERVICES AND COMPETENT RIGGING TRAINING COURSE
F. PAYMENT SCHEDULE
ITEM
# DESCRIPTION ESTIMATED
QUANTITY
UNIT OF
MEASURE UNIT PRICE EXTENDED
PRICE
3 Day Tower Climbing Safety, Rescue and Competent Rigging Training Course (Includes classroom and practical hands-on training)
7 EACH $ $
TOTAL PRICE: $
ALL PRICING SHALL BE FIRM AND FIXED.
THE COST SHALL COVER AND INCLUDE COST FOR ALL CONSULTANT EXPENSES, WHICH INCLUDE
DIRECT AND INDIRECT ADMINISTRATION FEES, AS WELL AS TRAVEL, MEALS, ACCOMMODATIONS AND
ALL RELATED COMPENSATION FOR INSTRUCTION, MATERIALS AND DEVELOPMENT.
NO ADDITIONAL CHARGES SHALL BE ALLOWED.
LEAD TIME (DAYS):____________________________________________________________
COMPANY: ____________________________________________________________________
CONTACT: ____________________________________________________________________
TITLE: ________________________________________________________________________
PHONE NUMBER: ______________________________________________________________
G. DRAFT AGREEMENT
The County’s contract with the successful Offeror(s) will be based upon the following Draft Agreement, structured as follows:
Draft Agreement
Exhibit A – Statement of Work Exhibit B – Insurance Requirements Exhibit C – Payment Schedule
Exhibits A (Statement of Work) and C (Payment Schedule) will be added during contract finalization. Offerors will be deemed to have accepted the Draft Agreement and Statement of Work, except where Offeror has taken clear exception in its quote in accordance with and when provided for in the Submittal Items.
The County’s contract with the successful Offeror(s) will be based upon the County’s Standard Purchase Order Terms and Conditions, located at https://www.sandiegocounty.gov/content/dam/sdc/purchasing/docs/dpc_terms_and_conditions.pdf https://www.sandiegocounty.gov/content/dam/sdc/purchasing/docs/dpc_terms_and_conditions.pdf
TOWER CLIMBING, SAFETY, RESCUE SERVICES AND COMPETENT RIGGING TRAINING COURSE
This agreement (“Agreement”) is made and entered into effective as of the date of the last signature on the signature page by and between the County of San Diego, a political subdivision of the State of California (“County”) and [# enter full title of legal entity, type of entity and location (e.g. “a Delaware corporation,” “a California limited liability company”), located at (complete address)] (“Contractor”). For valuable consideration, the receipt and sufficiency of which are hereby acknowledged, the parties agree as follows:
1. Agreement. The Agreement shall consist of:
• This document,
• Exhibit A Statement of Work,
• Exhibit B Insurance Requirements, and
• Exhibit C Payment Schedule.
In the event of a conflict between any provisions of this Agreement, the following order of precedence shall govern: First (1st) this document; Second (2nd) Exhibit B; Third (3rd) Exhibit A; Fourth (4th) Exhibit C.
2. Contractor:
3. Services: Tower Climbing, Safety, Rescue Services and Competent Rigging Training Course.
4. Agreement Term. This Agreement shall begin on the date of the last signature below and end upon completion and County acceptance of all deliverables under this Agreement.
5. Standard of Performance. Contractor shall, in good and workmanlike manner and in accordance with the highest professional standards, at its own cost and expense, furnish all of the labor, technical, administrative, professional and all other personnel, all supplies and materials, equipment, printing, transportation, training, facilities, and all other means whatsoever, except as herein otherwise expressly specified to be furnished by County, necessary or proper to perform and complete the work and provide the services required of Contractor by this Agreement.
6. Payment. Pursuant to Exhibit C, and other applicable provisions of this Agreement, County agrees to pay Contractor a sum not to exceed [# write out amount] ($######) (“Maximum Agreement Amount”).
Payment terms are, unless otherwise specified by County, thirty (30) days from the later of: (i) performance of work under the Agreement entitling Contractor to payment, or (ii) County receipt of a correct and substantiated invoice. Payment shall be deemed to have been made on the date that County submits electronic payment or mails a warrant or check.
7. Sales and Use Tax. On invoices, Contractor shall show any sales or use tax as separate items, giving permit number authorizing collection of use tax. Contractor shall deduct any cash discount before computing sales or use Tax.
8. Contracting Officer. The Director of the Department of Purchasing and Contracting or designated Department of Purchasing and
Contracting official is the contracting officer for this Agreement (“Contracting Officer”).
9. Notices. Notice to either party shall be in writing and personally delivered; sent by certified mail, postage prepaid, return receipt requested; or emailed to the County’s or Contractor’s representative designated below (or such party’s authorized representative).
Any such notice shall be deemed received by the party (or such party’s authorized representative) on the earliest of the date of personal delivery, three (3) business days after deposit in the U.S. Mail, or upon sending of an email from which an acknowledgement of receipt has been received other than an out of office, unavailable, or undeliverable reply.
FOR COUNTY: FOR CONTRACTOR:
#Name and Title #Address #Address #Phone and email
Above contact is designated as the Contracting Officer’s
Representative for this Agreement (“COR”).
#Name and Title #Address #Address #Phone and email
10. Compliance with Laws. Contractor shall at all times perform its obligations hereunder in compliance with all applicable federal, State, and local laws, rules, and regulations, current and hereinafter enacted, including facility and professional licensing and/or
TOWER CLIMBING, SAFETY, RESCUE SERVICES AND COMPETENT RIGGING TRAINING COURSE
certification laws, and keep in effect any and all licenses, permits, notices and certificates as are required. Contractor shall further comply with all laws applicable to wages and hours of employment, occupational safety, and to fire safety, health and sanitation.
11. County Policies and Requirements. Without limiting section 10 above, Contractor shall specifically comply with the following, as applicable:
a. Board of Supervisors Policy A-79, Interlocking Directorates
b. Board of Supervisors Policy A-120, Zero Tolerance for Fraudulent Conduct in County Services
c. Board of Supervisors Policy B-67,…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .