RFQ 1284LL22Q0044.pdf

SEE ADDENDUMIS CHECKED

CODE 18a. PAYMENT WILL BE MADE BY

CODE

FACILITYCODE

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN OFFER

OFFEROR

84LL

COEUR DALENE ID 83815

3232 WEST NURSERY ROAD

IDAHO PANHANDLE NATIONAL FORESTS

USDA-FS CSA INTERMOUNTAIN 1

0281 CODE 16. ADMINISTERED BYCODE

X

X

X

811213

SIZE STANDARD:

100.00 % FOR:SET ASIDE:UNRESTRICTED OR84LL

RFPIFB

10. THIS ACQUISITION ISCODE

RFQ

14. METHOD OF SOLICITATION

13b. RATING

NAICS:

SMALL BUSINESS

06/21/2022 1600 PT

06/07/2022

208-921-7318JEAN KEITHLEY

(No collect calls)

INFORMATION CALL:

FOR SOLICITATION 8. OFFER DUE DATE/LOCAL TIMEb. TELEPHONE NUMBER a. NAME

4. ORDER NUMBER3. AWARD/ 6. SOLICITATION

1284LL22Q0044

5. SOLICITATION NUMBER

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS 1. REQUISITION NUMBER PAGE OF

1 27 1065967OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, & 30

TELEPHONE NO.

17a. CONTRACTOR/

COEUR DALENE ID 83815

3232 WEST NURSERY ROAD

SUPERVISORS OFFICE

IDAHO PANHANDLE NATIONAL FORESTS

15. DELIVER TO

COEUR DALENE ID 83815

3232 WEST NURSERY ROAD

IDAHO PANHANDLE NATIONAL FORESTS

9. ISSUED BY

7.

2. CONTRACT NO.

EFFECTIVE DATE

$12.00

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK BELOW

ISSUE DATE

DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

11.

SEE SCHEDULEX

12. DISCOUNT TERMS

THIS CONTRACT IS A

RATED ORDER UNDER

DPAS (15 CFR 700)

13a.

SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

HUBZONE SMALL

BUSINESS

8(A)

USDA-FS CSA INTERMOUNTAIN 1

WOMEN-OWNED SMALL BUSINESS

(WOSB) ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

24.

AMOUNT

23.

UNIT PRICE

22.

UNIT

21.

QUANTITY

20.

SCHEDULE OF SUPPLIES/SERVICES

19.

ITEM NO.

Law Enforcement Vehicle Build Packages Four (4) Vehicles EN 1023, 1025, 1046, and 2737 Idaho Panhandle National Forests

Period of Performance: 06/27/2022 to 10/01/2022

0001 0104 IPNF Law Enforcement Vehicle build package

EN 1023 VIN 1FT7W2B64NED61686

Continued ...

(Use Reverse and/or Attach Additional Sheets as Necessary)

HEREIN, IS ACCEPTED AS TO ITEMS:

X

XX

DATED

JEAN A. KEITHLEY

. YOUR OFFER ON SOLICITATION (BLOCK 5),

INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE SET FORTH

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND DELIVER

ARE

ARE

31c. DATE SIGNED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA

31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER (Type or print)

ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY ADDITIONAL

SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1, 52.212-4. FAR 52.212-3 AND 52.212-5 ARE ATTACHED. ADDENDA

26. TOTAL AWARD AMOUNT (For Govt. Use Only)

OFFER

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA - FAR (48 CFR) 53.212

ARE NOT ATTACHED.

ARE NOT ATTACHED.

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

30b. NAME AND TITLE OF SIGNER (Type or print)

30a. SIGNATURE OF OFFEROR/CONTRACTOR

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

25. ACCOUNTING AND APPROPRIATION DATA

29. AWARD OF CONTRACT:

REF.

jkeithley Highlight jkeithley Highlight jkeithley Highlight jkeithley Highlight

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE

32c. DATE 32b. SIGNATURE OF AUTHORIZED GOVERNMENT REPRESENTATIVE

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED:

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

40. PAID BY39. S/R VOUCHER NUMBER38. S/R ACCOUNT NUMBER

37. CHECK NUMBER

FINALPARTIAL

36. PAYMENT

FINALPARTIAL

35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER33. SHIP NUMBER

COMPLETE

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

42d. TOTAL CONTAINERS42c. DATE REC'D (YY/MM/DD)

42b. RECEIVED AT (Location)

42a. RECEIVED BY (Print)

41c. DATE41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

STANDARD FORM 1449 (REV. 2/2012) BACK

24.

AMOUNT

23.

UNIT PRICE

22.

UNIT

21.

QUANTITY

20.

SCHEDULE OF SUPPLIES/SERVICES

19.

ITEM NO.

0002 0104 IPNF Law Enforcement Vehicle build package

EN 1025 VIN 1FT7W2B68NED61688

0003 0104 IPNF Law Enforcement Vehicle build package

EN 1046 VIN 1FT7W2B6XNED61689

0004 0104 IPNF Law Enforcement Vehicle build package

EN 2737 VIN 1FT7W2B66NED61690

32f. TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT REPRESENTATIVE

27 2 of

RFQ No. 1284LL22Q0044/LE Builds/IPNF

SECTION B – CONTINUATION OF SF-1449

Schedule of Items/Price Schedule

Item Supplies/Services Qty Unit of Issue

Total Amount

01 Law Enforcement Vehicle Build Package EN 1023

VIN 1FT7W2B64NED61686

1 Lump-Sum $

02 Law Enforcement Vehicle Build Package EN 1025

VIN 1FT7W2B68NED61688

1 Lump-Sum $

03 Law Enforcement Vehicle Build Package EN 1046

VIN 1FT7W2B6XNED61689

1 Lump-Sum $

04 Law Enforcement Vehicle Build Package EN 2737

VIN 1FT7W2B66NED61690

1 Lump-Sum $

Description of Requirement

The Idaho Panhandle National Forests has a requirement for a complete aftermarket alteration of four (4) Law Enforcement trucks. The Contractor shall provide and install after-market components, accessories, and vehicle decals on the government-furnished vehicles. These vehicles will be newly manufactured cab and chassis pickup trucks: 2022 Ford F250 SRW 4X4 Crew Cab, Super Duty, 6.2L Engine, with an 80” bed length.

The final products shall be complete, fully operational, and certified vehicles. In the event of any dimensional inconsistencies with the vehicles as manufactured, specifications, standards, etc., the Contractor shall be responsible to assure proper fit and operation of the completed product.

Contractors are encouraged to utilize bio-based products and non-ozone-depleting chemicals in production.

Use of recycled items or products made from recycled materials (or content)is subject to approval by the Contracting Officer. Contractor shall identify such products at least 10days before items are purchased by the Contractor to allow the Government time to determine if items are acceptable.

See Attachment for additional specification (Pages 13-20)

Delivery Date and Delivery Location

The Government will deliver and pick up the vehicle within a 4-hour drive of Coeur d’Alene, Idaho, to be completed by October 01, 2022.

Coordinate with Dave King at least 48 hours prior for delivery and pickup at (208) 446-4529 or david.c.king@usda.gov.

mailto:david.c.king@usda.gov

SECTION C - CONTRACT CLAUSES

52.252-2 Clauses Incorporated by Reference (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

Federal Acquisition Regulation (FAR) Clauses:

https://www.acquisition.gov/browse/index/far (FAR clauses begin with 52) Department of Agriculture Acquisition Regulation (AGAR) Clauses:

https://www.acquisition.gov/agar (AGAR clauses begin with 452) Deviations to clauses may be viewed at:

https://www.dm.usda.gov/procurement/policy/FARClassDeviations.htm

52.204-13 System for Award Management Maintenance (OCT 2018)

52.204-18 Commercial and Government Entity Code Maintenance (AUG 2020)

52.212-4 Contract Terms and Conditions – Commercial Products and Commercial Services

(NOV 2021)

Addenda to 52.212-4:

Replace paragraph (r) of clause 52.212-4 with the following as specified in

DEVIATION 2017-1 (AUG 2017):

(r) Compliance with laws unique to Government contracts. The Contractor agrees to comply with 31 U.S.C. 1352 relating to limitations on the use of appropriated funds to influence certain Federal contracts; 18 U.S.C 431 relating to officials not to benefit; 40 U.S.C. chapter 37, Contract Work Hours and Safety Standards; 41 U.S.C. chapter 87, Kickbacks; 41 U.S.C 4712 and 10 U.S.C 2409 10 U.S.C. 2409 relating to whistleblower protections; 49 U.S.C. 40118, Fly American; and 41 U.S.C chapter 21 relating to procurement integrity.

(a) Invoice. The Contractor shall invoice through the Invoice Processing Platform (IPP) system.

Contractor shall submit all invoices electronically via IPP. Payment will be made from the Contractor’s invoice and shall be in accordance with FAR clause 52.212-4(g) Invoice.

(b) IPP. The Forest Service is utilizing IPP for the electronic submission and tracking of contracts/purchase orders, invoices, and payment information. IPP is a web-based system that provides one integrated, secure system to simplify the management of vendor invoices. It is offered at no charge to federal agencies and their vendors. Visit https://www.ipp.gov/ to learn more.

After contract award, enrollment in IPP shall be completed by the USDA Forest Service based on the Contractor’s System for Award Management (SAM) account. Once enrolled by the agency, https://www.acquisition.gov/browse/index/far https://www.acquisition.gov/agar https://www.ipp.gov/ the Contractor shall receive two (2) emails: 1) one with an IPP login ID; and 2) one with a temporary password. The Contractor must ensure that the Point of Contact’s email address is up to date in the Contractor’s SAM account at www.sam.gov and that any recent update(s) have been allowed time to process resulting in an “Active” status on the SAM account.

52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders – Commercial Products and Commercial Services (JAN 2022) (DEVIATION JUL 2020)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (Nov 2021) (Section 1634 of Pub. L.

115-91).

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Nov 2021) (Section 889(a)(1)(A) of Pub. L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015)

(5) 52.233-3, Protest After Award (Aug 1996) (31 U.S.C. 3553).

(6) 52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004) (Public Laws 108-77 and 108-78 (19 U.S.C. 3805note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

[Contracting Officer check as appropriate.] ☐ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (June 2020), with

Alternate I (Oct 1995) (41 U.S.C. 4704 and 10 U.S.C. 2402).

☐ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Nov 2021) (41 U.S.C.

3509)).

☐ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment

Act of 2009 (Jun 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

☒ (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Jun 2020) (Pub. L. 109-282) (31 U.S.C. 6101 note).

☐ (5) [Reserved].

☐ (6) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

☐ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts

(Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

https://gcc02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.sam.gov%2F&data=02%7C01%7C%7C67254edf35364ac1d4e108d7c13f3cd8%7Ced5b36e701ee4ebc867ee03cfa0d4697%7C0%7C0%7C637190349652942438&sdata=yutMLav4CMcu5vE%2FrA4QvQmmed%2FX0LM9UibH8ziX3LQ%3D&reserved=0

☒ (8) 52.209-6, Protecting the Government’s Interest When Subcontracting with

Contractors Debarred, Suspended, or Proposed for Debarment. (Nov 2021) (31 U.S.C.

6101note).

☐ (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Oct 2018) (41 U.S.C. 2313).

☐ (10) [Reserved].

☐ (11) (i) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (Sep 2021) (15

U.S.C.657a).

☐ (12) (i) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business

Concerns (Sep 2021) 15 U.S.C. 657a).

☐ (13) [Reserved] ☒ (14) (i) 52.219-6, Notice of Total Small Business Set-Aside (Nov 2020) (15 U.S.C.644).

☐ (ii) Alternate I (Mar 2020) of 52.219-6.

☐ (15) (i) 52.219-7, Notice of Partial Small Business Set-Aside (Nov 2020) (15 U.S.C. 644).

☐ (ii) Alternate I (Mar 2020) of 52.219-7.

☐ (16) 52.219-8, Utilization of Small Business Concerns (Oct 2018) (15 U.S.C. 637(d)(2) and

(3)).

☐ (17) (i) 52.219-9, Small Business Subcontracting Plan (Nov 2021) (15 U.S.C. 637(d)(4)).

☐ (ii) Alternate I (Nov 2016) of 52.219-9.

☐ (iii) Alternate II (Nov 2016) of 52.219-9.

☐ (iv) Alternate III (Jun 2020) of 52.219-9.

☐ (v) Alternate IV (Sep 2021) of 52.219-9.

☐ (18) (i) 52.219-13, Notice of Set-Aside of Orders (Mar 2020) (15 U.S.C. 644(r)).

☐ (ii) Alternate I (MAR 2020) of 52.219-13

☐ (19) 52.219-14, Limitations on Subcontracting (Sep 2021) (15 U.S.C.637s) [Contracting Officer check as appropriate.]

☐ By the end of the base term of the contract and then by the end of each subsequent option period; or ☐ By the end of the performance period for each order issued under the contract.

☐ (20) 52.219-16, Liquidated Damages-Subcontracting Plan (Sep 2021) (15 U.S.C.

637(d)(4)(F)(i)).

☐ (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (Sep 2021) (15 U.S.C. 657f).

☒ (22) (i) 52.219-28, Post Award Small Business Program Rerepresentation (Sep 2021) (15 U.S.C. 632(a)(2)).

☐ (ii) Alternate I (MAR 2020) of 52.219-28.

☐ (23) 52.219-29, Notice of Set-Aside for, or Sole Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns (Sep 2021) (15 U.S.C. 637(m)).

☐ (24) 52.219-30, Notice of Set-Aside for, or Sole Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (Sep 2021) (15 U.S.C. 637(m)).

☐ (25) 52.219-32, Orders Issued Directly Under Small Business Reserves (Mar 2020) (15 U.S.C. 644(r)).

☐ (26) 52.219-33, Nonmanufacturer Rule (Sep 2021) (15 U.S.C. 637(a)(17)).

☒ (27) 52.222-3, Convict Labor (Jun 2003) (E.O.11755).

☒ (28) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (Jan 2022)

(DEVIATION JUL 2020) (E.O.13126).

☒ (29) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

☒ (30) (i) 52.222-26, Equal Opportunity (Sep 2016) (E.O.11246).

☐ (ii) Alternate I (Feb 1999) of 52.222-26.

☐ (31) (i) 52.222-35, Equal Opportunity for Veterans (Jun 2020) (38 U.S.C. 4212).

☐ (ii) Alternate I (Jul 2014) of 52.222-35.

☒ (32) (i) 52.222-36, Equal Opportunity for Workers with Disabilities (Jun 2020) (29

U.S.C.793).

☐ (ii) Alternate I (Jul 2014) of 52.222-36.

☐ (33) 52.222-37, Employment Reports on Veterans (Jun 2020) (38 U.S.C. 4212).

☐ (34) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act

(Dec 2010) (E.O. 13496).

☒ (35) (i) 52.222-50, Combating Trafficking in Persons (Nov 2021) (22 U.S.C. chapter 78 and E.O. 13627).

☐ (ii) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter78 and E.O. 13627).

☐ (36) 52.222-54, Employment Eligibility Verification (Nov 2021). (Executive Order 12989).

(Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial products or commercial services as prescribed in 22.1803.)

☐ (37) (i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA–Designated Items (May 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

☐ (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

☐ (38) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (Jun 2016) (E.O. 13693).

☐ (39) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (Jun 2016) (E.O. 13693).

☐ (40) (i) 52.223-13, Acquisition of EPEAT®-Registered Imaging Equipment (Jun 2014) (E.O.s 13423 and 13514).

☐ (ii) Alternate I (Oct 2015) of 52.223-13.

☐ (41) (i) 52.223-14, Acquisition of EPEAT®-Registered Televisions (Jun 2014) (E.O.s 13423 and 13514).

☐ (ii) Alternate I (Jun 2014) of 52.223-14.

☐ (42) 52.223-15, Energy Efficiency in Energy-Consuming Products (May 2020) (42 U.S.C.

8259b).

☐ (43) (i) 52.223-16, Acquisition of EPEAT®-Registered Personal Computer Products (Oct 2015) (E.O.s 13423 and 13514).

☐ (ii) Alternate I (Jun 2014) of 52.223-16.

☒ (44) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (Jun 2020) (E.O. 13513).

☐ (45) 52.223-20, Aerosols (Jun 2016) (E.O. 13693).

☐ (46) 52.223-21, Foams (Jun 2016) (E.O. 13693).

☐ (47) (i) 52.224-3 Privacy Training (Jan 2017) (5 U.S.C. 552 a).

☐ (ii) Alternate I (Jan 2017) of 52.224-3.

☐ (48) 52.225-1, Buy American-Supplies (Nov 2021) (41 U.S.C. chapter 83).

☒ (49) (i) 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act (Nov 2021)

(DEVIATION JUL 2020) (41 U.S.C. chapter 83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, 19 U.S.C. chapter 29 (sections 4501- 4732), Pub. L. 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110- 138, 112-41, 112-42, and 112-43.

__ (ii) Alternate I (May 2014) of 52.225-3.

☒ (iii) (ii) Alternate II (Jan 2021) (DEVIATION JUL 2020) of 52.225-3.

☐ (iv) (iii) Alternate III (Jan 2021) (DEVIATION JUL 2020) of 52.225-3.

☐ (50) 52.225-5, Trade Agreements (Oct 2019) (DEVIATION JUL 2020) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

☒ (51) 52.225-13, Restrictions on Certain Foreign Purchases (FEB 2021) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

☐ (52) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

☐ (53) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C.

5150).

☐ (54) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C. 5150).

☐ (55) 52.229-12, Tax on Certain Foreign Procurements (Feb 2021).

☐ (56) 52.232-29, Terms for Financing of Purchases of Commercial Products and Commercial

Services (Nov 2021) (41 U.S.C.4505, 10 U.S.C.2307(f)).

☐ (57) 52.232-30, Installment Payments for Commercial Products and Commercial Services

(Nov 2021) (41 U.S.C.4505, 10 U.S.C.2307(f)).

☒ (58) 52.232-33, Payment by Electronic Funds Transfer-System for Award Management

(Oct 2018) (31 U.S.C. 3332).

☐ (59) 52.232-34, Payment by Electronic Funds Transfer-Other than System for Award

Management (Jul 2013) (31 U.S.C.3332).

☐ (60) 52.232-36, Payment by Third Party (May 2014) (31 U.S.C.3332).

☐ (61) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a).

☐ (62) 52.242-5, Payments to Small Business Subcontractors (Jan 2017) (15 U.S.C. 637(d)(13)).

☐ (63) (i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Nov

2021) (46 U.S.C. 55305 and 10 U.S.C. 2631).

☐ (ii) Alternate I (Apr 2003) of 52.247-64.

☐ (iii) Alternate II (Nov 2021) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

Contracting Officer check as appropriate.] ☐ (1) 52.222-41, Service Contract Labor Standards (Aug 2018) (41 U.S.C. chapter 67).

☐ (2) 52.222-42, Statement of Equivalent Rates for Federal Hires (May 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

In compliance with the Service Contract Labor Standards statute and the regulations of the Secretary of Labor (29 CFR Part 4), this clause identifies the classes of service employees expected to be employed under the contract and states the wages and fringe benefits payable to each if they were employed by the contracting agency subject to the provisions of 5 U.S.C.5341 or 5 332.

☐ (3) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (Multiple Year and Option Contracts) (Aug 2018) (29 U.S.C. 206 and 41 U.S.C.

chapter 67).

☐ (4) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (May 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

☐ (5) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (May 2014) (41 U.S.C. chapter 67).

☐ (6) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (May 2014) (41 U.S.C. chapter 67).

☐ (7) 52.222-55, Minimum Wages for Contractor Workers Under Executive Order 14026 (Jan 2022).

☐ (8) 52.222-62, Paid Sick Leave Under Executive Order 13706 (Jan 2022) (E.O. 13706).

☐ (9) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Jun 2020) (42

U.S.C. 1792).

(d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, as defined in FAR 2.101, on the date of award of this contract, and does not contain the clause at 52.215-2, Audit and Records-Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor’s directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3

Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(e) (1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1) in a subcontract for commercial products or commercial services. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause-

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (Nov 2021) (41 U.S.C.

3509).

(ii) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(iii) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (Nov 2021) (Section 1634 of Pub. L. 115-91).

(iv) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Nov 2021) (Section 889(a)(1)(A) of Pub. L. 115-232).

(v) 52.219-8, Utilization of Small Business Concerns (Oct 2018) (15 U.S.C.637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds the applicable threshold specified in FAR 19.702(a) on the date of subcontract award, the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(vi) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

(vii) 52.222-26, Equal Opportunity (Sep 2015) (E.O.11246).

(viii) 52.222-35, Equal Opportunity for Veterans (Jun 2020) (38 U.S.C.4212).

(ix) 52.222-36, Equal Opportunity for Workers with Disabilities (Jun 2020) (29

U.S.C.793).

(x) 52.222-37, Employment Reports on Veterans (Jun 2020) (38 U.S.C.4212).

(xi) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act

(Dec 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.

(xii) 52.222-41, Service Contract Labor Standards (Aug 2018) (41 U.S.C. chapter 67).

(xiii) (A) 52.222-50, Combating Trafficking in Persons (Nov 2021) (22 U.S.C. chapter 78 and E.O 13627).

(B) Alternate I (Mar 2015) of 52.222-50(22 U.S.C. chapter 78 and E.O 13627).

(xiv) 52.222-51, Exemption from Application of the Service Contract Labor Standards to

Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (May 2014) (41 U.S.C. chapter 67).

(xv) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (May 2014) (41 U.S.C. chapter 67).

(xvi) 52.222-54, Employment Eligibility Verification (Nov 2021) (E.O. 12989).

(xvii) 52.222-55, Minimum Wages for Contractor Workers Under Executive Order 14026

(Jan 2022).

(xviii) 52.222-62, Paid Sick Leave Under Executive Order 13706 (Jan 2022) (E.O.

13706).

(xix) (A) 52.224-3, Privacy Training (Jan 2017) (5 U.S.C. 552a).

(B) Alternate I (Jan 2017) of 52.224-3.

(xx) 52.225-26, Contractors Performing Private Security Functions Outside the United

States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

(xxi) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Jun 2020) (42 U.S.C. 1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.

(xxii) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Nov 2021) (46 U.S.C. 55305 and 10 U.S.C.2631). Flow down required in accordance with paragraph

(d) of FAR clause 52.247-64.

(2) While not required, the Contractor may include in its subcontracts for commercial products and commercial services a minimal number of additional clauses necessary to satisfy its contractual obligations.

52.232-40 Providing Accelerated Payments to Small Business Subcontractors (NOV 2021) (DEVIATION APR 2020) (31 USC 3903 and 10 USC 2307)

52.252-6 Authorized Deviations in Clauses (NOV 2020)

(a) The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter 1) clause with an authorized deviation is indicated by the addition of “(DEVIATION)” after the date of the clause.

(b) The use in this solicitation or contract of any Agriculture Acquisition Regulation (48 CFR __4_) clause with an authorized deviation is indicated by the addition of “(DEVIATION)” after the name of the regulation.

452.204-70 Modification for Contract Closeout (OCT 2021)

Upon contract closeout for contracts utilizing Simplified Acquisition Procedures (SAP) according to FAR 13:

(a) If unobligated funds in the amount of $1000 or less remain on the contract, the Contracting Officer (CO) shall issue a unilateral modification for deobligation. The contractor will receive a copy of the modification but will not be required to provide a signature. The CO shall immediately proceed with contract closeout upon completion of the period of performance, receipt and acceptance of supplies or services, and final payment.

(b) If unobligated funds of more than $1000 remain on the contract, the CO shall issue a bilateral modification for deobligation. The contractor will receive a copy of the modification and will be required to provide a signature. (The CO may also request a Release of Claims be completed by the contractor, although not required for contract and orders using SAP procedures.) If the bilateral modification and Release of Claims are not returned to the CO within 60 days, the CO shall release the modification as unilateral and proceed with contract closeout upon completion of the period of performance, receipt and acceptance of supplies or services, and final payment.

SECTION D – CONTRACT DOCUMENTS, EXHIBITS, OR ATTACHMENTS

1. TECHNICAL SPECIFICATIONS (PAGES 13-20)

2. EXAMPLE PICTURE OF LAW ENFORCEMENT TRUCK (PAGE 27)

TECHNICAL SPECIFICATIONS

MARKED TRUCKS

• 2022 Ford F250 SRW 4X4 Crew Cab

• Super Duty

• 6.2L Engine

• 80” bed length

General Requirements

Contractor shall disconnect all internal lights and door chimes so they do not automatically activate when the door is opened. The operator should still be able to manually activate the internal lights at will. All lighting will be installed to achieve the maximum visibility possible.

Cut Out Switches

Contractor shall install a cut out for the rear tail lights and back up lights to one push button of the siren light control.

Wiring Specifications:

Wire shall be of SXL (Cross Linked Polyolefin Insulated) XLP type and meet the following specifications:

Ford (M1L-85A) & Chrysler (MS-5919) wire specifications, or similar to.

Heat resistance rates according to SAE-J-1128

Abrasion Resistance rating to meet or exceed MIL T-5438

The wiring harness/fuse panel shall be modular in design. It shall include all power wires & any trigger or activation wires so that no extra wires are outside the harness. This harness is to include all wiring, LED CORNER LIGHTS, rear light-kill wires, gunlock, scanner, etc.

Additional labeled power wires shall be wired into the harness to facilitate future equipment upgrades. Future use power wires shall have fuse terminal locations pre-existing in the modular fuse panel. All fuse terminal connectors shall be crimped with a Molex connector and wired to run without interruption to the hardware it controls. No butt connectors or crimp caps shall be used in the harness. No push on terminals of any type, specifically Scotch-Lock, or T-Tap connectors are to be used within the harness, or the completed vehicle. Additionally, no “Fuse Taps” of any type are permissible, as these add an additional amp load on the factory electrical wiring which was not intended by the vehicle manufacturer.

Each component’s wiring must be sized to handle at least 125% of that circuit capacity. All wire runs are to be within factory wiring channels and secured every 6 inches at a minimum. Extra wiring is to be cut short; still allowing a service loop, but no bundles of wire under the carpet, dash, or trunk will be acceptable.

A single 4-gauge power wire shall be wired directly to the battery positive terminal to the fuse block. The 4 gauge main power wire shall first run directly into a manually reset able circuit breaker. All terminal ends for any 4 gauge wire must be crimped and soldered, and covered with red, temperature activated adhesive, heat shrink. The master ground is to be an 8-gauge wire, grounded to vehicle chassis and run into the console, terminating with a common ground bolt in the console near the fuse block. All grounds not wired to the common ground shall use star type lock washers at the ground end, i.e. Headlight flasher, and strobe power supply. No barrier strip grounding is permitted.

ALL WIRING IS TO BE HIDDEN. THE FRONT OF THE CONSOLE SHOULD NOT BE

SHOWING ANY WIRING. WRAP WIRES IN A PROTECTIVE LOOM AND POSITION

INSIDE THE CONSOLE.

Master fuse:

A manually resettable circuit breaker shall be installed in the engine compartment as close to the battery as possible, sized appropriately for the load connected, i.e. two radios, siren /light controller, 2 DC cigarette outlets, gun locks, and a portable radio/battery charger.

Fuse block:

Inside the console, an ATO/ATC spade style fuse block shall be installed. This fuse block will be the only fuse connection for any and all equipment. No in-line fuses will be utilized within the instrument console.

Master cut off switch:

Master cut-off switch shall cut OFF all power to aftermarket police equipment installed in the console and be mounted and easily accessible by the driver under the driver’s seat.

Radio antenna:

On marked LE vehicles, the contractor shall provide 2 permanent roof-mounted antenna bases (MAXRAD model BMP-NC, 3/4inch mount with a minimum12 foot RG58U stranded cable or equivalent). Antenna cable connector provided and installed by Contractor will be determined by make/model of radios furnished. Make/model of radio will be Make: BK, Model: DMH.

Multiple antennae should be separated by approximately 4 feet when possible.

Secondary antenna:

On marked LE vehicles, the contractor shall provide and install MAXRAD antenna model MWB-1320 (1/4 wave antenna with spring). Contractor shall ensure minimum of 100-watt radio output. An additional antenna mount and coax shall be installed and capped. The government may use this additional antenna mount for citizen band, scanner, cellular booster kit, or an additional two-way radio.

Portable Radio Trickle Charger:

The vehicle shall contain a portable Motorola APX 7000 charger, Motorola NNTN7624 IMPRES 12volt DC Vehicular charger, or equivalent. Charger should be mounted in the rear seat area at the floorboard and attached to the center console. Charger mounting should not interfere with rear-seated passengers.

https://www.magnumelectronics.com/Mototorola-APX-Vehicle-Charger-p/nntn7624.htm https://www.magnumelectronics.com/Mototorola-APX-Vehicle-Charger-p/nntn7624.htm

Forest Service Radio Installation:

Contractor shall prepare console for installation of Forest Service radio. The government will provide make and model of radio, console layout schematic. Contractor shall furnish protected wiring and slot in console. Contractor will provide connection for “radio rebroadcast” through the grill speaker on specified vehicles. When “Radio” is selected on PA unit, FS radio will be heard outside the vehicle through the grill speaker. A one-inch conduit is to run from the console interior to the driver-side rear seat to be used for two-part radio systems. Mounting of the radios in the console shall be done with radio specific mounting faceplates. Make/model of radio will be Make: BK, Model: DMH.

Fire Extinguishers:

A 5-pound UL rating 3A40BC multi-purpose dry chemical fire extinguisher shall be mounted in the rear storage area left side behind the driver seat in pickups.

Laptop computer console mount:

The Government requests computer mounts and associated printers be installed. Prior to installation, the vendor shall contact the local patrol captain receiving the vehicle and verify the specific location of the printer. The make and model will be provided at time of order and price negotiated. Laptop mounting console will be provided by the government at the time of the build. Vehicle-specific base plate from mobile mounts will be provided by the Contractor. Local Patrol Captain: Martin Bedertscher (208) 660-8674 or martin.badertscher@usda.gov.

Map light:

A flexible LED map light will be installed at the left front of the console. Light will have a blue/UV lens. The map light will be mounted on the side of the center console in a manner that is easily accessible to the driver.

https://www.fedsig.com/product/littlite

Spotlight:

Shall be a Unity spotlight or comparable; 6-inch, 200,000 candlepower LED spotlight. Installed on driver side, “A” frame post mount, and install to manufacturer’s specifications.

Secure Idle / Anti-Theft device

All marked vehicles shall have an anti-theft device installed pursuant to manufacturer specifications which allows the vehicle to continue running with the ignition key removed from the vehicle. The device shall be a SecureIdle or SafeStop device or comparable and specific to the vehicle make and model. The device shall be installed in a manner where the button to activate the system is installed in a visible manner on the dash within reach of the driver sitting in the driver’s seat.

https://www.secure-idle.com/index.html http://safestopinc.com/ mailto:martin.badertscher@usda.gov https://www.fedsig.com/product/littlite https://www.secure-idle.com/index.html http://safestopinc.com/

4 DOOR Crew Cab Trucks

Contractor shall furnish and install the following aftermarket components and accessories in all marked Law Enforcement Vehicles:

All crew cab trucks will be outfitted with a dual prisoner transportation partition like or similar to Setina’s model, https://setina.com/partitions/30047-2/ , mounted in the rear seat/ passenger area.

Rear Security Partition shall be a Setina 12-VS- or comparable for SUV and a Lexan partition securely mounted for the prisoner seat partition.

Weapons lock, timer, wall bracket for guns, and butt plates shall be a Setina Double Vertical Weapons System Retro-kit, https://setina.com/part/d-t-rail-mount-1-small-1-universal-xl-whandcuff-key-2/ , or comparable, for Colt AR 15 rifle and Remington 870 shotgun. Shotgun and rifle handcuff style locking system shall be vertically mounted on security partition with one switch to operate both locks and key opening ability using a standard handcuff key. Locks shall be solidly mounted on partition in order to ensure easy access to firearms. Switch shall be wired directly to the fuse box (WIRE HOT). Switch shall be hidden and located on the top far left side of console. Firearms switch shall have a 10 second momentary switch. Shotgun mounted on driver side, rifle mounted on passenger side. Specifics on weapons locks will be determined at the time of build by the specific Officer and Supervisor. Weapons lock Santa Cruz Style gun lock and rack.

Flashlight:

Flashlight shall be rechargeable, with a minimum of 40,000 candlepower, a fast recharge (90 seconds) and 12v DC cord. Contractor shall mount on driver side of console as close to the seat as possible to be readily available but not to interfere with the Officer’s leg.

https://www.streamlight.com/en/products/detail/index/ultrastinger-led

Crew Cab truck Bed Gun Vault Storage

Waterproof secure dual drawer bed storage for securing field gear. Minimum 2,000 lb payload with 200 lb payload per drawer. Length will be determined by make and model of truck, however storage unit will be 3 to 6 inches shorter than bed length. Storage unit will be approximately 12 inches tall.

https://decked.com/products/decked-drawers

LAW ENFORCEMENT APPLICATION – MARKED VEHICLES

Instrument Console

Shall be a Troy Products CC –MC-18 or equivalent (if there is a vehicle specific model available, that shall be used), metal construction with floor mounts and universal face-plates for make and model of vehicle. Length shall maximize amount of slots without interfering with rapid weapon removal from gun mount. The forward portion, passenger side is to be left clear for computer mounting.

https://setina.com/partitions/30047-2/ https://setina.com/part/d-t-rail-mount-1-small-1-universal-xl-whandcuff-key-2/ https://setina.com/part/d-t-rail-mount-1-small-1-universal-xl-whandcuff-key-2/ https://www.streamlight.com/en/products/detail/index/ultrastinger-led https://decked.com/products/decked-drawers

Components required to be installed in slots or on console include:

• AC-LL-12 Map Light mounted on the driver’s side forward

• BK (KNG) Radio Face Plate (first slot)

• Siren/Light Controller Face Plate (second slot)

• Motorola O5 APX 7500 Face Plate (third slot)

• AC-AP2 DC Outlet (2-4 each) MOUNTED NEAR THE DASH IF POSSIBLE

• Magnetic Microphone mounts for each microphone, to be mounted to the side of radio slot or PA slot

• USB inputs (2 each) mounted on the console so as not to interfere with other operations

• Cup holder at the console rear to not interfere with long gun deployment

• Lockable storage box (if space available) in console

• Vendor shall remount factory installed (dash or center console) USB/ 2.5 mm audio jack onto troy console

Contractor shall furnish and install the following electronics in Law Enforcement SUV and 4-door crew cab trucks:

Light bar:

Shall be a Soundoff Signal nForce (ENFLB) dual color LEDs or equivalent. The full width light bar with graphite or similar color top cover and reasonably visible to the rear will consist of the following minimum: (2) 3x2 LED Red, (2) 3x2 LED Blue, (5) 5 inch LED Red, (5) 5 inch LED blue, (2) Take Downs, (2) Alley, (6) Directional ambers on rear light bar, integrated user programmable directional amber light arrows, and clear outer lenses, and ability to turn entire light bar white for scene illumination. Corner modules shall illuminate Red on one side and blue on the other. Light bar shall be mounted in accordance with manufacturer’s specifications.

https://www.soundoffsignal.com/products/nforce-led-lightbar/

PA/Siren Speaker:

Speaker shall be a Soundoff Signal 100N Series Composite Speaker or equivalent, be mounted underneath the hood in the front portion of the engine compartment out of sight and protected from dirt/mud in compliance with manufacturer specifications. Police radio shall be wired to allow radio broadcast to be received from speaker at officer’s option. PA system shall be operated by remote handheld siren/light control and wired for operation through siren speaker.

https://www.soundoffsignal.com/products/100n-series-composite-speaker/

Radio Speaker:

Speaker shall be mounted inside the console with speaker holes provided. Location of speaker, will be installed behind head of driver.

https://www.soundoffsignal.com/products/nforce-led-lightbar/ https://www.soundoffsignal.com/products/100n-series-composite-speaker/

WIG-WAG Flasher:

Mounted LED or equivalent “wig-wag”, clear in color, mounted in headlight housing, separate from actual headlights in lieu of traditional “wig-wag”. Switch will be mounted in accordance with manufacturer’s specifications.

Similar to https://www.soundoffsignal.com/products/universal-undercover-led-insert/

LED Corner Lightheads, Rear Lighting, Grill Lighting

LED CORNER LIGHTS for specific make and model of vehicle shall be mounted in accordance with manufacturer’s specifications. Typically these lights shall be mounted in the front turn signal lenses and the rear back up lenses when space allows. Power supply shall be mounted in a protected area and shielded from gear. LED lights shall be blue in color.

Similar to https://www.soundoffsignal.com/products/universal-undercover-led-insert/

REAR & GRILL LIGHTING for Trucks

Two (2) Soundoff Signal mPower Facia 4” 12 LED Dual , or similar to. Color Red/Blue in color shall be mounted on the rear tailgate so at to not interfere with the tailgate operation.

Two (2) Lights shall be mounted in the front grill of pickup and tailgate of vehicle

Lights must be waterproof and designed for mounting and operation on the outside of the vehicle. Should it be necessary to mount lights with screws or bolts that penetrate the paint or protective coating of the vehicle, silicone or other waterproof sealant shall be used to ensure water impingement to the body of the vehicle does not occur. Enough extra wiring shall be provided in a service loop to allow the remounting of the lights on an aftermarket bumper or brush guard should one be installed at a later date.

https://www.soundoffsignal.com/products/mpower-led-fascia-light/

Controller

PA/Siren/Lights shall be nEnergy 400 Series Remote Siren with Knob Control or equivalent, 100W, PA/volume control, four position slide switch, (8) selectable backlit relay push-buttons with high contrast daytime lighting when turned on, internal programmable switching and wired as follows:

https://www.soundoffsignal.com/products/nergy-400-series-remote-knob-siren/

Three stage slide type light control for light bar, CORNER LEDs, wig wags and siren operation shall be programmed:

• Position 1 –Rear flashers of light bar and rear corner LEDs.

• Position 2 –Entire light bar, four corner LEDs

• Position 3 –Entire light bar, four corner LEDs, and wig-wags.

https://www.soundoffsignal.com/products/universal-undercover-led-insert/ https://www.soundoffsignal.com/products/universal-undercover-led-insert/ https://www.soundoffsignal.com/products/mpower-led-fascia-light/ https://www.soundoffsignal.com/products/nergy-400-series-remote-knob-siren/

Eight push button style control switches

• Number one – Left Alley

• Number two – Right Alley

• Number three – Take-downs/

• Number four – Right to Left Arrow (amber arrow with red/blue corners)

• Number five –Center Directional Arrow

• Number six – Left to Right Arrow (amber arrow with red/blue corners)

• Number Seven – Back up lights and Brake lights cutout Ensure vehicle will still shift from P to other gears with this engaged

• Number Eight -- Full white front scene illumination

Contractor shall install a master switch that will turn OFF all aftermarket equipment installed within the console. This switch shall be mounted on the drivers side, easily accessible, and in a manner that does not interfere with the safe operation of the vehicle or the driver.

STRIPING/DECALS

Forest Service marked law enforcement vehicles display the following markings:

A 11.25” x 15” LE badge centered vertically and horizontally on both the driver and forward passenger doors. Minor vertical and horizontal adjustments can be made to accommodate external vehicle markings or impediments, but every effort should be made to center the badge on the door.

A green 2” stripe and gold 1” stripe below and touching the green stripe originating from the side of the grill area and extending down the entire side length of the vehicle, terminating at the tail light assembly or tailgate seam. Position the stripes just above the door handles and below the bottom edge of the window frames applied horizontally to match the lines of the vehicle. The striping will not be placed below the top edge of the door handles.

A green 6” x 42” “LAW ENFORCEMENT” decal centered vertically to the LE badge and centered horizontally between the edge LE badge and the rear fender well or bed seam of the vehicle.

Two 3.5” x 6.65” American flags, one on each side of the front fender of the vehicle, star fields forward. The flags should be placed approximately 1” in front of the fender seam and approximately 1”-3” below the bottom of the gold stripe. The American flags will be the same height on both sides of the vehicle.

A brown 6” traditional Forest Service shield on the passenger side rear quarter of the vehicle approximately 1”-3” forward of the rear taillight assembly and approximately 1”- 3” below the bottom of the gold stripe, aligned vertically with the American flag.

A full color 4.75” x 6.65” USDA logo on the driver side rear quarter of the vehicle approximately 1”-3” forward of the rear taillight assembly and approximately 1”-3” below the bottom of the gold stripe, aligned vertically with the American flag.

A reflective 8.25” x 11” LE badge on the left side rear lift gate or tailgate of the vehicle, centered approximately vertically between the top and bottom painted edges of the rear lift gate or tailgate and centered approximately horizontally between the left edge of the rear lift gate or tailgate and license plate recess of lift gate or center of tailgate.

A reflective green 7” x 15” “LAW ENFORCEMENT” stacked layout on the right side rear lift gate or tailgate of the vehicle, centered approximately vertically between the top and bottom painted edges of the rear hatch or tailgate and centered approximately horizontally between the left edge of the rear lift gate or tailgate and license plate recess of lift gate or center of tailgate.

A 1.5” brown Working Capital Fund equipment number will be placed on the lower right most portion of the tailgate or lift gate.

USDA Forest Service Law Enforcement and Investigations Marked Vehicle Decal Order Sheet

Decal Details, Kim Wood 2856 Cedar Dr. Fruitland, ID 83619

(208) 452-5164 kim@decaldetails.com

Sport Utility Vehicle, Truck, and Sedan: Standard Kit Qty Description 2 11.25” x 15” LE badge 1 2" x 50' green stripe 1 1" x 50' gold stripe 2 3.5” x 6.65” American flags (1 of the 2 a reverse flag) 2 6" x 42" LAW ENFORCEMENT (horizontal layout) (green) 1 4.75” x 6.65” USDA logo 1 6” Forest Service shield 1 8.25” x 11” LE badge (reflective) 1 7” x 15” LAW ENFORCEMENT (stacked layout) (green) (reflective) mailto:kim@decaldetails.com

SECTION E - SOLICITATION PROVISIONS

52.252-1 Solicitation Provisions Incorporated by Reference (FEB 1998) This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es):

Federal Acquisition Regulation (FAR) Clauses:

https://www.acquisition.gov…