RFQ 1217 - Oil Distributor Trailer - General Information.docx

DOCX document 62 KB Posted

Attached to
Asphalt Distributor Trailer
Solicitation number
1217
Issued by
Minidoka County, Idaho

About this file

This is a Request for Quotation (RFQ) issued by the Idaho Transportation Department for the purchase and delivery of one new Asphalt Distributor Trailer. The solicitation was released on February 17, 2026, with a submission deadline of March 3, 2026. Vendors must submit quotes electronically through the IPRO system powered by LUMA or via email to the RFQ lead, Kevin Chambers, at Kevin.Chambers@itd.idaho.gov. Required submittals include a completed Price Sheet (Attachment 2), Signature Page (Attachment 3), and documentation demonstrating that the offered equipment meets all specifications. The trailer must be delivered FOB Destination freight prepaid to the Idaho Transportation Department District 4 facility in Shoshone, Idaho, within 180 calendar days after receipt of order. Delivery must occur Monday through Thursday between 8:00 a.m. and 3:00 p.m. local time, excluding state holidays. Award will be made to the responsive, responsible vendor with the lowest cost proposal.

The RFQ specifies comprehensive technical requirements for the Asphalt Distributor Trailer, including a 1,000-gallon double-walled aluminum tank with high-temperature insulation, a 13-horsepower Honda gasoline engine, a 350,000 BTU Beckett diesel burner heating system, a 14-foot spray bar with remote controls, and dual 7,000-pound axles with electric brakes and LED lighting systems compliant with Federal Motor Vehicle Safety Standards. The trailer must not exceed 14,000 Gross Axle Weight Rating. The manufacturer or authorized distributor must provide a minimum 18-month warranty covering all parts, labor, travel, and freight, with warranty work to be completed within 30 calendar days of notification. The contractor must also provide comprehensive manuals in PDF format, complete parts listings, electrical circuit diagrams, and on-site training by a manufacturer-authorized service representative for a minimum of four hours at no additional cost to ITD. No pricing information, award value, or set-asides are disclosed in this solicitation document.

View the file

Other files

File Type Posted
Solicitation_Instructions-July-2025.pdf PDF
Exhibit A - Deliverable Acceptance Form.docx DOCX document
Exhibit B - Contract Discrepancy Notice.docx DOCX document

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

IDAHO TRANSPORTATION DEPARTMENT

RFQ 1217

ASPHALT DISTRIBUTOR TRAILER

GENERAL INFORMATION

Purpose The Idaho Transportation Department (ITD) is requesting quotes from qualified vendors for the purchase and delivery of one (1) Asphalt Distributor Trailer, as further detailed below.

Solicitation Contact Name: Kevin Chambers Phone: (208)334-8768 Email: Kevin.Chambers@itd.idaho.gov (preferred method of contact) Restrictions on Communications From the issue date of this RFQ, until a contract/purchase order is awarded or the RFQ is cancelled, vendors and their representatives are prohibited from communications (written or verbal) regarding this RFQ with the ITD staff, other than the ITD RFQ Lead. Any communications (written or verbal) with ITD staff other than the RFQ Lead may result in the submitting vendor being found Non-Responsible and Non-Responsive.

Requirements and Specifications See Section 1 – Requirements & Specifications Quote Your Quote may be submitted electronically via IPRO Powered by LUMA or email (see below for additional details). ITD will not be accepting manual submissions for this solicitation. Your Quote must include the Required Submittals listed below and be received prior to the deadline established in IPRO Powered by LUMA.

Electronic Submission:

IPRO – Enter your pricing in IPRO (https://purchasing.idaho.gov/information-for-vendors/) and upload all Required Submittals.

Email:

Send an email to the Solicitation Contact (see Section 2) and attach all Required Submittals.

Required Submittals Attachment 2 – Price Sheet Attachment 3 – Signature Page Documentation, which demonstrates, to ITD’s satisfaction, that the offered item meets the requirements of the solicitation. Failure to provide satisfactory documentation may eliminate the Vendor from further consideration.

List of Attachments
Required Submittal Items

Attachment 1 - Requirements & Specifications Attachment 2 – Price Sheet Attachment 3 – Signature Page Attachment 4 – Insurance Requirement Attachment 2 – Price Sheet Attachment 3 – Signature Page

(See Attachment 2 – Requirements and Specifications)

Response Your Quote may be submitted electronically via Luma or email, (see below for additional details). Your Quote must include the Required Submittals listed above and be received prior to the deadline established in Luma.

Electronic Submission:

IPRO – Enter your pricing in IPRO (https://purchasing.idaho.gov/information-for-vendors/) and upload all Required Submittals.

Award Award will be made to the responsive responsible vendor with the lowest cost on Attachment 2 – Price Sheet.

The State reserves the right not to evaluate or make an award in the best interest of the State.

Though it is not mandatory to submit your Quotation electronically via IPRO, all vendors participating in a solicitation issued through IPRO must establish an account in the IPRO system (even if submitting a quote outside of IPRO). It is free to establish an account and only takes a few minutes of your time.

RFQ 1217

ATTACHMENT 1 – REQUIREMENTS & SPECIFICATIONS

ASPHALT DISTRIBUTOR TRAILER

SECTION 1 – REQUIREMENTS

1. Brand Name The brand names specified in this solicitation are intended to be descriptive, but not restrictive; indicative of the quality and characteristics of items that meet the minimum requirements. Vendors offering an “equal” must include documentation, which demonstrates, to ITD’s satisfaction, that the offered item(s) meets the requirement of the solicitation. In the event documentation is not satisfactory, ITD reserves the right to seek clarification from the Vendor. Failure to provide satisfactory documentation or a clarifying response to ITD may eliminate the Vendor from further consideration.

1. Authorized Distributor/Manufacturer Submitting vendors must be an authorized distributor or manufacturer of the Asphalt Distributor Trailer offered. An authorized distributor shall be defined as a company or organization that has a written agreement with the manufacturer to sell or service its products. Bids from Contractors who are not an authorized distributor by the manufacturer shall not be considered.

ITD reserves the right to request authorized distributor documentation from the submitting vendors. Failure to provide submitting documentation as requested will result in a non-responsive quote.

Manuals The Contractor must provide the following items at the time of delivery. Stated items must cover all systems including drawings, schematics, applicable technical information, and component parts;

One (1) service manual equipment – PDF format;

One (1) parts manual equipment – PDF format;

Make and Model of all installed components and applicable manuals;

Complete, fully illustrated parts listing for all Contractor installed components and;

All electrical accessory circuits must have their own circuit diagram, showing the complete power and ground sides, routing, wire color and gauge, pin numbers, switches, breaker or fuse location and/or number, and specific ground point locations.

Training The Contractor must provide, at delivery location, a manufacturer authorized service representative(s), knowledgeable of the installed equipment, to give instructions on the operations, maintenance, and safety of the equipment. The representative(s) must be versed in all aspects of the trailer. Training session will be at least four (4) hours.

No additional charges to ITD will be allowed for training.

Warranty Manufacturer standard warranty must cover the Asphalt Distributor Trailer for a minimum period of eighteen (18) months after Acceptance. Manufacturer standard warranty must cover paint defects, apart from normal wear and tear under normal working conditions.

Vendor must provide Warranty documentation at the time of delivery. The Asphalt Distributor Trailer will not be accepted without this information.

Warranty must include all tools, parts, equipment, labor, travel and freight to repair or replace a defective warranted item, which may also include the entire Asphalt Distributor Trailer. All warranty work must be completed within thirty (30) calendars days after receipt of written notice from ITD. If approved in writing by ITD, the Contractor may perform warranty work on-site, at the Delivery location identified in Section 8, in lieu of pick-up and return shipping. The Contractor shall be responsible for all travel costs and work-site clean-up associated with any necessary repairs. The timeframe for corrective action will still be as identified above. If the Contractor is unable to repair the Asphalt Distributor Trailer on-site within thirty (30) calendars days, or if the Asphalt Distributor Trailer continuously malfunctions and causes it to be out of service on multiple occasions, ITD reserves the right to require the Contractor to pick up, repair, and return the Asphalt Distributor Trailer at no additional cost to ITD.

Awarded vendor is responsible for all warranty requirements. No third-party warranties will be allowed.

Acceptance Upon receipt, the Asphalt Distributor Trailer will be inspected by the ITD Maintenance Services Manager or designee to ensure the minimum specifications are met. Acceptance will occur within fourteen (14) calendar days after delivery. If ITD determines that the Asphalt Distributor Trailer is not in accordance with the specifications, ITD will provide the Contractor with a written notification. The Contractor must pick up, correct any discrepancies, and re-deliver to ITD specified location at the Contractor's expense. The timeframe for completion of corrective action must not exceed thirty (30) calendar days.

In the event the specifications are not met, ITD reserves the right to reject the Asphalt Distributor Trailer via email notification.

With ITD approval, the Contractor may correct discrepancies on-site at ITD’s location in lieu of pick-up and return shipping. The Contractor will be responsible for providing all labor, travel, tools, parts, supplies, and worksite clean up to make any necessary corrections. The timeframe for corrective action will still be as identified above.

See Exhibit A&B.

Termination and Cure See section 1.4. State of Idaho Contract Terms and Conditions in the Attachment Tab in IPRO Powered by Luma.

Delivery The Contractor must deliver and unload the Asphalt Distributor Trailer FOB Destination freight prepaid and allowed to the location below, within one hundred and eighty (180) calendar days after receipt of order (ARO), or as coordinated with ITD's contact for delivery. ITD reserves the right to accept delivery dates outside of the desired delivery date if in the best interest of the State of Idaho.

The contractor will be responsible for the unloading of the Asphalt Distributor Trailer. Towing of the Trailer in lieu of flatbed delivery is acceptable. Please indicate your intended method of delivery in Attachment 2 – Price Sheet. If Contractor elects to tow the Trailer as their delivery method, Contractor must have insurance sufficient to cover any damage caused to the Asphalt Distributor Trailer during shipping, up to and including coverage to replace the entire Asphalt Distributor Trailer if needed.

Delivery must be made Monday through Thursday, 8:00 am to 3:00 pm local time excluding state of Idaho recognized holidays (https://idaho.gov/government/state-holidays/), unless otherwise approved in writing by ITD.

Delivery Location:

Idaho Transportation Department- District 4 63 W Hwy 26 Shoshone, 83352 Insurance See Attachment 4 – Insurance Requirement Invoicing The Contractor must submit its invoice within thirty (30) calendar days of acceptance to the billing contact identified on the Contract. Invoices submitted prior to acceptance, or without the required information listed below, will be returned to the Contractor for correction and resubmission. The following information must be included with each invoice:

ITD Purchase Order (PO) number Contract Name and Order Number Invoice Number and Date Contractor Contact Information Itemization of Property (description, quantity, unit of measure, unit price, and total price) Vehicle Identification Number (VIN) Invoices must be submitted electronically to:

HQFleet@ITD.IDAHO.GOV Payment Payment will be made in accordance with Idaho Code 67-2302 https://legislature.idaho.gov/statutes after receipt of the Contractor's itemized invoice and is accepted by ITD. Total payments under this Contract shall not exceed the Total Price provided on Attachment 2 - Price Sheet unless otherwise modified in an amendment to the resulting Contract.

SECTION 2 – SPECIFICATIONS

ASPHALT DISTRIBUTOR TRAILER

The Asphalt Distributor Trailer must meet the minimum specifications provided below and be the latest model of the manufacturer's current standard production, as offered to commercial trade. Asphalt Distributor Trailer must be new, not used. Though they are not specifically covered herein, all parts necessary to provide complete and functional Asphalt Distributor Trailer must be included. All parts must conform in design, strength, quality of materials, and workmanship to current engineering practices and accepted standards of the industry. All parts must be the manufacture’s standard unless otherwise specified in this RFQ.

Asphalt Distributor Trailer must be completely assembled when delivered to the ITD location listed in Attachment 1 - Section 1, 8. Delivery (above), with all accessories and equipment in place or furnished. All equipment and accessories must be installed as per the manufacturer’s specifications, and the Asphalt Distributor Trailer must be serviced and ready for continuous operation at the time of delivery.

1. Asphalt Distributor Trailer Trailer not to exceed fourteen thousand (14,000) Gross Axle Weight Rating (GWAR).

Tank Capacity – One thousand (1000) gallons;

Construction – Entire container must be double walled with aluminum jacket with a two (2) inch high temperature insulation. Must have interior baffles;

Manway – DOT approved, non-pressurized. Minimum twenty (20) inches with minimum ten (10) inches fill opening;

Valves – Must have breather/overflow, bottom discharge and cleanout valve and;

Gauge – Material level with mechanical indicator.

Power Unit Type – Thirteen (13) Horsepower (HP) Honda gasoline;

Controls – Electric start and;

Battery – Deep Cell enclosed in battery case with voltmeter.

Controls Material Temperature – Thermostatic controller with digital display;

Material Temperature Guage – Analog and;

Spray Bar – Remote controls for on and off. Must include all required equipment for a fully operational spray bar.

Heating System Type Forced air with spark ignition. Diesel burner to utilize flues with submerged heating tubes during operation;

Burner – Three hundred fifty thousand (350,000) BTU Beckett diesel burner;

Fuel Tank – Thirteen (13) gallons and;

Electric Heat – Must utilize on shore two hundred twenty (220) volt power for overnight heating;

Spray System Spray Bar – Fourteen (14) feet with six (6) inch cutoffs. Remote operated controls. Must include all required equipment for a fully functioning spray system;

Pump – Sixty (60) gallon per minute (GPM). Must include easy to remove cap and filter;

Fluid Flush Tank – Ten (10) gallons;

Spray Wand – Five (5) feet in length with a swivel handle that will not transfer heat from the wand and equipped with a dead man shut off valve to eliminate dripping and accidental spray and;

Hose Reel – Heavy duty fifty (50) foot hose on a retractable reel.

Trailer Axles – Seven thousand (7,000) pound each, dual axle;

Wheels/Tires – Sixteen (16) inch. Eight (8) lugs. ST235/80R16-E 10Ply. Must include spare tire mounted on the tongue or as close to the tongue as possible;

Brakes – Twelve (12) volt electric on all axles with electric breakaway;

Hitch – Adjustable, pintle type;

Jack – Heavy duty, adjustable;

Fenders – Heavy duty type, steel. Must cover both axles, curbside and roadside;

Lights – Compliant with all State of Idaho requirements and Federal Motor Vehicle Safety Standards (FMVSS). All lights must be rubber grommet mounted in weatherproof enclosures with watertight connections for quick and easy replacement;

Stop, Turn, and Taillights – Four (4), red Light Emitting Diode (LED) type, six (6) inch oval combination stop, turn and taillight heads Identification Bar – Three (3) red, LED type, 2 1/2 in. round lights;

Side Clearance Lights – Two (2) inch red with two (2) inch grommet;

Warning Light – Amber, LED type. Mounted has high as possible on rear of unit and;

Safety – Must be properly placarded in accordance with 49 CFR Part 172, Subpart F, based on the hazard class, quantity, and material classification. Must include all necessary and appropriate Safety Placards and Reflectivity mounted on unit.

4 | Page KC

RFQ 1217 ASPHALT DISTRIBUTOR TRAILER 02/2026

image1.png

File details come from the government source that posted it. Updated .