RFQ 1-8779.docx

DOCX document 100 KB Posted

Attached to
Rooftop Cooling Unit Replacement in the Laboratory Building.
Solicitation number
148340
Issued by
Lucas County, Ohio

About this file

Summary of RFQ 1-8779

This Request for Quotation (RFQ) is issued by the City of Toledo, Department of Public Utilities, Division of Water Reclamation, for the replacement of a rooftop cooling unit at the Bay View Water Reclamation Facility's Laboratory Building located at 3900 North Summit Street, Building #1, Toledo, Ohio. The project involves the removal of an existing Lennox Model KCA180S4BN1G 15-ton packaged rooftop cooling unit and the furnishing and installation of a new replacement unit manufactured by Lennox or an approved equivalent. The replacement unit must match or exceed the existing unit's cooling capacity, electrical characteristics (460V, 3-phase power), airflow requirements, and operational performance. Qualified HVAC contractors must demonstrate a minimum of five years of experience with commercial or industrial HVAC installation and replacement projects of similar size and complexity, supported by detailed project references. The bid submission deadline is Tuesday, December 8, 2026, at 1:30 PM EST, with bid opening at 2:00 PM EST via PlanetBids portal. A pre-bid meeting is scheduled for Thursday, November 24, 2026, at 10:00 AM at the Division of Water Reclamation facility. The contractor shall provide all labor, materials, equipment, crane services, supervision, startup, testing, commissioning, and documentation for the complete replacement, with no specific contract term renewal options mentioned in the document.

The scope of work includes site verification, removal and proper disposal of the existing unit, installation of the new cooling-only unit with factory-installed economizer, reconnection of ductwork and electrical systems, roof protection and damage repair, and comprehensive startup and commissioning services. The selected contractor must comply with prevailing wage requirements and enter into a Project Labor Agreement with the Northwest Ohio Building and Construction Trades Council for this public improvement project. A 24-month warranty on labor and materials is required following installation. Performance and payment bonds are required, as the project expenditure exceeds $40,000. All bids must include Construction Project Paperwork, Line Items, a Bid Guaranty (bid bond or certified/cashier's check), a signed contract, and a Tax Exemption Certificate. Bidders must comply with all applicable OSHA regulations, National Electrical Code standards, and local electrical codes. The City of Toledo applies local preference in accordance with Toledo Municipal Code Section 187.34, and proposers must identify any pricing subject to tariff fluctuations.

View the file

Other files

Show all 15

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

City of Toledo One Government Center 640 Jackson Street Toledo, Ohio 43604

REQUEST FOR QUOTATION

Construction & Maintenance

Rooftop Cooling Unit Replacement in the Laboratory Building Purchase Requisition Number 10008779 Issued By Department of Public Utilities, Division of Water Reclamation

Date Issued Monday, November 16, 2026

Response Submission Date and Time: Tuesday, December 08, 2026, at 1:30 PM EST. Bids will be read at 2:00 PM EST

Submit online through PlanetBids:

https://pbsystem.planetbids.com/portal/22576/portal-home

SCOPE AND SPECIFICATIONS

PROJECT OVERVIEW

Project Title: Rooftop Cooling Unit Replacement in the Laboratory Building

Location: Bay View Water Reclamation Facility, 3900 North Summit St., Building #1, Toledo, OH 43611.

The City of Toledo/Division of Water Reclamation is requesting proposals from qualified HVAC contractors to remove the existing rooftop cooling unit and furnish and install a new replacement rooftop cooling unit serving the Laboratory Building at the Bay View Water Reclamation Facility.

The existing unit is a Lennox Model KCA180S4BN1G, a15-ton packaged rooftop cooling unit, operating on 460V, 3-phase power. The unit has reached the end of its useful service life and shall be replaced with a new rooftop cooling unit manufactured by Lennox or an approved equal. The replacement unit shall match or exceed the existing unit’s cooling capacity, electrical characteristics, airflow requirements, configuration, and operational performance.

The Contractor shall provide all labor, materials, equipment, crane services, supervision, startup, testing, commissioning, and documentation for the complete replacement.

OBJECTIVES

· Replace the existing rooftop cooling unit serving the Laboratory Building. Provide a new cooling unit that is equivalent to the existing unit’s cooling capacity, airflow requirements, and configuration.

· Provide startup, testing, commissioning, and operational verification services for the new rooftop cooling unit to the satisfaction of the Water Reclamation staff.

· Improve the reliability, efficiency, and maintainability of the Laboratory cooling system. Maintain compatibility with the existing ductwork, roof curb, electrical service, and control system.

VENDOR QUALIFICATIONS

Interested vendors shall demonstrate the following qualifications:

· A minimum of five (5) years of experience performing commercial or industrial HVAC installation and replacement projects, including rooftop packaged HVAC units of similar size and complexity, supported by a detailed list of completed projects with work descriptions, completion dates, and references (contact names, email addresses and phone numbers).

· The Contractor shall be responsible for providing all labor, materials, equipment, rigging, crane services, startup, testing, and commissioning necessary to complete the replacement project.

· The contractor shall possess all HVAC licenses, certifications, and insurance required to perform this type of work in the State of Ohio.

· The contractor shall maintain compliance with all applicable federal, state, and local regulations, including OSHA standards.

SCOPE OF WORK

The selected contractor shall be responsible for the following:

· Conduct a site visit and verify all existing field conditions prior to ordering equipment.

· Remove the existing rooftop cooling unit serving the Laboratory Building and properly dispose of all removed equipment and materials.

· Furnish and install one new rooftop cooling unit manufactured by Lennox or an approved equal.

· The replacement unit shall match or exceed the existing system's cooling capacity, electrical characteristics, airflow configuration, duct configuration, and overall operational performance.

· The replacement unit shall be a cooling-only unit rated at 15 tons nominal cooling capacity and 460V/3-phase/60Hz power, and shall include a factory-installed economizer.

· Coordinate delivery, rigging, crane operations, and rooftop access required for the removal and replacement of the rooftop unit.

· Reconnect all existing ductwork, condensate piping, electrical systems, controls, and related accessories to ensure proper operation.

· Replace any defective or damaged electrical conduit, fittings, disconnects, or accessories required for proper operation.

· Protect the existing roof and surrounding equipment during all construction activities, and repair any damage resulting from the work.

· Provide startup, testing, balancing adjustments, and commissioning services for the new rooftop cooling unit.

· Verify proper operation of all unit controls, safety devices, and economizer functions.

· Demonstrate proper operation of the new unit to Division of Water Reclamation personnel.

· Submit all required documentation, including equipment submittals, startup reports, operation and maintenance manuals, warranty information, and any applicable as-built documents.

EQUIPMENT REQUIREMENTS

The replacement rooftop cooling unit shall meet the following minimum requirements:

· Packaged rooftop cooling configuration.

· Nominal cooling capacity of 15 tons.

· Outdoor rooftop installation

· 460 Volt / 3 Phase / 60 Hertz electrical service

· Factory-assembled and factory-tested unit.

· Factory-installed evaporator and condenser sections

· Direct-drive or belt-drive supply fan sized to meet existing airflow requirements.

· Weatherproof, corrosion-resistant cabinet construction suitable for outdoor installation.

· Unit dimensions and configuration shall be compatible with the existing roof curb and duct connections, or include all required adapters and transitions.

· Unit efficiency shall meet or exceed all applicable federal, state, and local energy efficiency requirements.

ELECTRICAL REQUIREMENTS

· Verify all electrical requirements and field conditions prior to equipment procurement and installation.

· Disconnect and reconnect all existing power and control wiring, along with associated electrical components, required for the proper operation of the new rooftop cooling unit.

· Provide and install all required electrical conduit, fittings, disconnects, conductors, supports, and accessories necessary for a complete and operational installation.

· Coordinate all electrical work, shutdowns, and startup activities with Plant Operations and the Project Manager.

· Verify proper voltage, phase, rotation, control operation, and equipment safety prior to startup and commissioning.

· Ensure all electrical work complies with:

- National Electrical Code (NEC)

- Local electrical codes

- Manufacturer’s recommendations

STARTUP AND COMMISSIONING

The Contractor shall:

· Perform startup and commissioning of the new rooftop cooling unit in accordance with the manufacturer's recommendations. This action shall be witnessed by the manufacturer's local authorized representative.

· Verify proper airflow, cooling capacity, and overall system performance.

· Verify proper electrical operation, control functionality, and operation of all safety devices.

· Verify refrigerant type, cooling capacity, and pressure to ensure proper operation.

· Provide the City with startup, testing, and commissioning documentation upon completion.

· Demonstrate proper operation of the new rooftop cooling unit for Water Reclamation personnel

SAFETY REQUIREMENTS

· The Contractor shall comply with all applicable OSHA regulations and the Bay View Water Reclamation Facility's safety requirements.

· All lockout/tagout procedures, rooftop access activities, equipment shutdowns, and crane operations shall be coordinated with Plant Operations and the Project Manager.

· The Contractor shall be responsible for providing all required safety equipment, including fall protection, barricades, warning signage, and personal protective equipment necessary to perform the work safely.

· The Contractor shall protect facility personnel, equipment, and property from damage or injury during construction.

· Any incident, injury, property damage, or safety concern must be reported immediately to the Project Manager and Plant Operations.

WARRANTY

The Contractor shall provide a warranty on labor and materials used for 24 months from installation. Warranty documentation shall be submitted to the City upon project completion.

PRE-BID MEETING

There will be a pre-bid meeting held on Thursday, November 24, 2026, at 10:00 p.m. The meeting will be held in the Administration Building at the Division of Water Reclamation, located at 3900 N. Summit Street, Building #1, Toledo, OH 43611. Attendance is strongly encouraged. Failure to attend may result in the likelihood that your bid may not be scored lowest and best.

LOCAL PREFERENCE

The description of and procedure to apply local preference to complainant bids received by the City of Toledo can be found under Toledo Municipal Code section 187.34.

The Toledo Municipal Code can be found by searching for the City of Toledo webpage toledo.oh.gov and clicking the “Government” link, then clicking the “City Code” link.

TARIFFS

Proposers must clearly identify any portion of their pricing that may be subject to fluctuation due to current or future tariffs, duties, or trade restrictions imposed by the United States or other governing bodies.

If any materials, products, or components included in the proposal are subject to tariffs or similar trade measures, the proposer should identify these items and specify the associated cost impact within the pricing section of their proposal. The awarded contractor shall not adjust pricing after contract execution unless such adjustment is directly attributable to a documented and material change in tariff costs that could not have been reasonably anticipated at the time of the proposal.

Any request for price adjustment due to tariff changes must include detailed supporting documentation and will be subject to review and approval by the City.

PREVAILING WAGE

This is a prevailing wage project. The latest prevailing wage rates at the time this bid was posted are available on the “Documents” tab of this bid in PlanetBids. The successful bidder shall submit certified payrolls to the City for all labor performed on the project 2 weeks after start dates and weekly thereafter. Please Note; Pre-Construction meeting w/ Compliance is required prior to work starting.

CONTRACT AWARDS CRITERIA FOR CONSTRUCTION, ALTERATION, AND/OR RENOVATION PROJECTS Please find the criteria to identify the lowest and best bidder for construction, alteration, and/or renovation projects in excess of one hundred thousand dollars ($100,000), under the Toledo Municipal Code section 187.12.

PROJECT LABOR AGREEMENT (PLA)

Toledo Municipal Code Section 187.12(d) requires the successful bidder of a public improvement contract of $100,000 or greater, which is funded by the City of Toledo or other sources that do not exclude Project Labor Agreements (“PLA”), to enter into a PLA with the Northwest Ohio Building and Construction Trades Council (“NWOBTC”).

Once the successful bidder is notified of bid award, a pre-job conference shall be held within fifteen (15) days of the award notification between the Bidder and the Northwest Ohio Building and Construction Trades Council (“NWOBTC”). An executed Project Labor Agreement must be delivered to the Division of Purchases and Supplies within fifteen (15) working days from pre-job conference with NWOBTC. An executed Project Labor Agreement must have the signature of the lead contractor and the Executive Secretary of the Northwest Ohio Building and Construction Trades Council at a minimum to be deemed valid. A template PLA is attached to this bid for your review.

The successful bidder, and all of the bidder’s contractors and subcontractors, must comply with and adhere to all of the provisions of the PLA executed with the NWOBTC.

PERFORMANCE BOND & PAYMENT BOND (may be applicable per TMC 187.28) Every contract involving an expenditure of the amount of forty thousand dollars ($40,000) or more for the performance of work and labor and for the installation of equipment upon any street, highway, bridge, building or other public improvement in which both labor and material are involved, shall be accompanied by a bond in the Ohio statutory form, in an amount not less than the bid price, of the contractor to the City, guaranteeing the performance of the contract according to its provisions and payment of all lawful claims of subcontractors, material suppliers and laborers for work performed or materials furnished in performing the contract, and indemnifying the City against damages suffered by failure to perform the contract. Such bond shall be for the benefit of any subcontractor, material supplier or laborer having a just claim as well as the City.

QUESTIONS

All questions regarding the plans and specifications must be in writing submitted through the PlanetBids website Q&A tab. The City’s responses will be posted through PlanetBids.

BID SUBMISSION

Bids for this project can be accepted via e-bid only through the City of Toledo’s PlanetBids portal. Bid submittals or other transmissions of information have not been completed until an email confirmation of the transmission has been issued by PlanetBids. Bids prices shall be to two (2) decimal places (i.e. $0.00). Only one (1) price per line item will be accepted with this bid.

In order to be awarded a contract, the City requires all of the following documents must be submitted with each bid your company submits in 2026 in PlanetBids:

· Construction Project Paperwork*

· Line Items

· Bid Guaranty (bid bond or certified check / cashier’s check on a solvent bank) – see instructions below

· Signed Contract by the Vendor*

· Tax Exemption Certificate*

*Located on “Documents” tab in PlanetBids

Bid Guaranty requirements are located on the “Bid Information” tab on PlanetBids. The bid guaranty shall be in the form of a cashier’s check/official check on a solvent bank or a bid bond. If using a check as the bid guaranty, the check must be scanned and uploaded with your bid. In addition, the check must be received by the Division of Purchases and Supplies no later than the due date and time to be deemed responsive. No Company / No Personal checks will be accepted. Checks shall be made payable to “City of Toledo.” If your company is using a bid bond, scan and upload with bid; the original does not need to be received by the City of Toledo. If your company does not provide a bid guaranty, your bid submittal will be deemed non-responsive. (TMC 187.09)

City of Toledo Division of Purchases and Supplies One Government Center, Suite 2000 640 Jackson Street Toledo, OH 43604

Beginning with bids advertised on or after March 13, 2026 the following documents will only need to be submitted once for your company for the duration of all contracts with the City. If any information changes, it is the company’s responsibility to notify the city and update the applicable documentation.

City Paperwork:

· Vendor Registration Form, if your company is new to doing business with the city

· Business Tax Registration Form, if your company is new to doing business with the city

· Child Support Affidavit, notarized

· Vendor Utility

Beginning with bids advertised on or after March 13, 2026 the following documents will only need to be submitted once for all bids your company submits in 2026. If any information changes, it is the company’s responsibility to notify the City and update the applicable paperwork.

Annual Paperwork:

· W-9

· Certificate of Insurance, naming the City of Toledo as an additionally insured – requirements available on the “Documents” tab of PlanetBids

· Worker’s Compensation Certificate

· EEO Compliance

· Debarment Certification

· Living Wage Affidavit, updated no later than February 1st

BID OPENING MEETING

Bids will be open at 2 PM EST on the due date of this bid via Zoom Meeting at:

https://link.edgepilot.com/s/72026a0a/vScHndadGUqgTn8jHzPYJQ?u=https://toledo-oh-gov.zoom.us/j/96570601158

Preliminary Bid results will be available within 1-2 business days on the PlanetBids website after bid opening. Bid results will be published to the PlanetBids website once awarded.

image1.jpeg

File details come from the government source that posted it. Updated .