F10261983-CMS HGCAL - COOLING PLATE.pdf
PDF 6 MB Posted
- Attached to
- Cooling plate machining
- Solicitation number
- RFP382985
About this file
CMS HGCAL Cooling Plate Machining Drawing – Fermi National Accelerator Laboratory
This is a technical engineering drawing specification for CMS HGCAL (Compact Muon Solenoid Hadron Calorimeter EndCap) cooling plate machining, prepared for the Fermi National Accelerator Laboratory (a U.S. Department of Energy facility). The drawing (F10261983) specifies master file parameters for layers 1-20 of an electrolytic tough pitch copper cooling plate assembly and provides comprehensive machining instructions, tolerances, and dimensional requirements for manufacturing.
The specification defines nine hole types (labeled A through P) with corresponding specifications for threaded holes (M2, M3, M4, and M6), counterbore features for screw clearance, precision alignment holes, and inspection points. Key manufacturing requirements include: flatness and thickness tolerance maintenance throughout the machining process, prohibition of surface machining on top surfaces of specific hole types, burst edge breaking to a maximum 0.5 mm, and surface finish specifications of Ra 3.2 maximum on all machined surfaces. All features are controlled by a 3D STEP file with ASME Y14.5M-2009 dimensioning standards applied. Critical inspection requirements mandate formal inspection of all inspection points and precision alignment holes (Type H and L). The cooling plate must be handled with fixtures to prevent bending, remain free of cutting oil, grease, burrs, and chips, and maintain consistent flatness before and after machining operations. The drawing includes detailed sections, cross-sections, and scale views illustrating complex internal cooling passages and feature configurations across seventeen sheets.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| RFP 382985 - CMS Cooling plate machining batch 2.zip | ZIP file |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV REVISION CONTROL DOCUMENT DATES SIGNATURES
- F10261983---RCD
DRAWN
APPROVED
DESCRIPTION: CMS HGCAL, COOLING PLATE MACHINING, MASTER FILE, LAYERS 1-20
PROJECT: CMS-HGCAL
CATEGORY:
TEMPLATE VERSION: 2021.08.02
HOLES DESCRIPTION BASED ON LABELS
LABEL HOLE TYPE HOLE SIZE TOLERANCE DIAMETER
TOLERANCE NOTES
A Threaded M2 X 0.4 - Through 0.2 A B C - Mounting holes
B Threaded M3 X 0.5 - Through 0.2 A B C - Mounitng holes
C Threaded M3 X 0.5 - Through
8mm 3.35 0.2 A B C -0.25/+0.25 Mounting holes
D Threaded M4 X 0.7 - Through 0.2 A B C - Mounting holes
E Threaded M6 X 1 - Through 0.2 A B C - The pattern of these holes is the same on all designs
F Counter bore 2.4mm - Through 4.6mm 3.5mm 0.2 A B C -0.1/+0.1 Screw clearance hole for M2 low head socket head cap screw
G Counter bore 4.3mm - Through 8mm 4mm 0.2 A B C -0.1/+0.1 Screw clearance hole for M4 low head socket head cap screw
H Through 2.5mm 0.1 A B C H7 (0.000/+0.010) Precision alignment hole
J Through 6mm 0.2 A B C H9(0.000/+0.030) Fit hole
K Through 6.5mm 0.2 A B C H11(0.000/+0.090) The pattern of these holes is the same on all designs
L Through 10mm 0.1 A B C H7(0.000/+0.015) Precision alignment hole
M Through 12.1mm 0.2 A B C 0.0/+0.1 Clearance hole
P Inspection point - 0.5 A B C - These are points that need formal inspection to meet the profile tolerance
NOTES:
1. ALL FEATURES ARE CONTROLLED BY 3D STEP FILE. TOLERANCES ARE SPECIFIED ON THE DRAWING. DIMENSIONS SHOWN ON THE DRAWING FOR CLARITY ONLY.
2. REVIEW SPECIFATION DOCUMENT ED0047723 FOR DETAILS OF THE DRAWING.
3. COPPER PLATE MUST BE HANDLED WITH FIXTURES TO AVOID BENDING. FLATNESS SHOULD BE THE SAME BEFORE AND AFTER MACHINING.
4. FLATNESS AND THICKNESS TOLERANCES OF THE COPPER PLATE ARE FOR REFERENCE ONLY, NO SURFACE MACHINING IS REQUIRED.
5. NO CHAMFER ALLOWED ON THE TOP SURFACE OF HOLES TYPE "A", "D", "H".
6. TOLERANCE ON COUNTERBORE DEPTH IS ±0.50 WHEN MEASURED FROM THE NOMINAL PLATE SURFACE.
7. INSPECTION REPORT TO INCLUDE ALL "INSPECTION POINTS" AND THE "H" & "L" TYPES OF "PRECISION ALIGNMENT HOLES".
8. PART TO BE FREE FROM OF ALL CUTTING OIL AND GREASE.
9. PART TO BE FREE OF BURRS AND CHIPS.
UNLESS OTHERWISE SPECIFIED
±X ±X.X ±X.XX ±X/X ±X°
N/A N/A N/A N/A 1°
BREAK ALL SHARP EDGES, MAX: 0.5
DO NOT SCALE DRAWING
DIMENSIONS BASED ON: ASME Y14.5M-2009
MAX MACHINE ALL SURFACES, Ra: 3.2
DRAWING UNITS: MM
THIRD ANGLE PROJECTION
DRAWN K.BOGACZ DATE 04-Jun-2026 CHECKED H K.GUTTI DATE 04-Jun-2026 APPROVED M.ALYARI DATE 04-Jun-2026
USED ON
MATERIAL
ELECTROLYTIC TOUGH PITCH COPPER
GROUP: Particle Physics Mechanical Support CAGE CODE: OU5R6
FERMI NATIONAL ACCELERATOR LABORATORY
UNITED STATES DEPARTMENT OF ENERGY
NAME
CMS HGCAL, COOLING PLATE MACHINING, MASTER
FILE, LAYERS 1-20
SCALE SIZE DRAWING NUMBER SHEET REV
N/A A1 F10261983 1 OF 17 -
REV REVISION CONTROL DOCUMENT DATES SIGNATURES
- F10261983---RCD
DRAWN
APPROVED
DESCRIPTION: CMS HGCAL, COOLING PLATE MACHINING, MASTER FILE, LAYERS 1-20
PROJECT: CMS-HGCAL
A
A
B
B
C
C
D
D
E
E
F
F
DRAWN
APPROVED
DESCRIPTION: CMS HGCAL, COOLING PLATE MACHINING, MASTER FILE, LAYERS 1-20
PROJECT: CMS-HGCAL
DETAIL A
SCALE 5:1
2.20 ±0.25
9.00
8.00 ±0.25
4R A
A
SECTION A-A
SCALE 5:1
3.00 ±0.50
DETAIL B
SCALE 5:1
B
B
SECTION B-B
SCALE 5:1
4.00 ±0.50
13.00 ±0.25
9.25
5.00 ±0.25
X2 2R
DETAIL C
SCALE 2:1
PRECISION ALIGNMENT
FEATURE
16.10 ±0.05
8.05R
PRECISION ALIGNMENT
FEATURE
16.10 ±0.05
8.05R
DETAIL D
SCALE 2:1
DETAIL E
SCALE 2:1
EB
EB
SECTION EB-EB
SCALE 5:1
3.65 ±0.50
4.50 ±0.20
2.25 ±0.10R
5.50 ±0.20
0.50 ±0.10
0.50 ±0.10
3.63 ±0.50
3X 2.25 ±0.10R
MACHINE WITH
BALL END MILL
EA
EA
SECTION EA-EA
SCALE 5:1
MACHINE WITH
BALL END MILL
UNLESS OTHERWISE SPECIFIED
±X ±X.X ±X.XX ±X/X ±X°
N/A N/A N/A N/A 1°
BREAK ALL SHARP EDGES, MAX: 0.5
DO NOT SCALE DRAWING
DIMENSIONS BASED ON: ASME Y14.5M-2009
MAX MACHINE ALL SURFACES, Ra: 3.2
DRAWING UNITS: MM
THIRD ANGLE PROJECTION
DRAWN K.BOGACZ DATE 04-Jun-2026 CHECKED H K.GUTTI DATE 04-Jun-2026 APPROVED M.ALYARI DATE 04-Jun-2026
USED ON
MATERIAL
ELECTROLYTIC TOUGH PITCH COPPER
GROUP: Particle Physics Mechanical Support CAGE CODE: OU5R6
FERMI NATIONAL ACCELERATOR LABORATORY
UNITED STATES DEPARTMENT OF ENERGY
NAME
CMS HGCAL, COOLING PLATE MACHINING, MASTER
FILE, LAYERS 1-20
SCALE SIZE DRAWING NUMBER SHEET REV
N/A A1 F10261983 2 OF 17 -
REV REVISION CONTROL DOCUMENT DATES SIGNATURES
- F10261983---RCD
DRAWN
APPROVED
DESCRIPTION: CMS HGCAL, COOLING PLATE MACHINING, MASTER FILE, LAYERS 1-20
PROJECT: CMS-HGCAL
A
B
B
C
C
D
D
E
E
F
F
15.8R 16.3R 16.8R
UNLESS OTHERWISE SPECIFIED
±X ±X.X ±X.XX ±X/X ±X°
N/A N/A N/A N/A 1°
BREAK ALL SHARP EDGES, MAX: 0.5
DO NOT SCALE DRAWING
DIMENSIONS BASED ON: ASME Y14.5M-2009
MAX MACHINE ALL SURFACES, Ra: 3.2
DRAWING UNITS: MM
THIRD ANGLE PROJECTION
FERMI NATIONAL ACCELERATOR LABORATORY
UNITED STATES DEPARTMENT OF ENERGY
NAME
CMS HGCAL, COOLING PLATE MACHINING, MASTER
FILE, LAYERS 1-20
SCALE SIZE DRAWING NUMBER SHEET REV
N/A A1 F10261983 3 OF 17 -
DRAWN K.BOGACZ DATE 04-Jun-2026 CHECKED H K.GUTTI DATE 04-Jun-2026 APPROVED M.ALYARI DATE 04-Jun-2026
USED ON
MATERIAL
ELECTROLYTIC TOUGH PITCH COPPER
GROUP: Particle Physics Mechanical Support CAGE CODE: OU5R6
REV REVISION CONTROL DOCUMENT DATES SIGNATURES
- F10261983---RCD
DRAWN
APPROVED
DESCRIPTION: CMS HGCAL, COOLING PLATE MACHINING, MASTER FILE, LAYERS 1-20
PROJECT: CMS-HGCAL
DETAIL BH
SCALE 1:1
UNLESS OTHERWISE SPECIFIED
±X ±X.X ±X.XX ±X/X ±X°
N/A N/A N/A N/A 1°
BREAK ALL SHARP EDGES, MAX: 0.5
DO NOT SCALE DRAWING
DIMENSIONS BASED ON: ASME Y14.5M-2009
MAX MACHINE ALL SURFACES, Ra: 3.2
DRAWING UNITS: MM
THIRD ANGLE PROJECTION
FERMI NATIONAL ACCELERATOR LABORATORY
UNITED STATES DEPARTMENT OF ENERGY
NAME
CMS HGCAL, COOLING PLATE MACHINING, MASTER
FILE, LAYERS 1-20
SCALE SIZE DRAWING NUMBER SHEET REV
N/A A1 F10261983 3 OF 17 -
DRAWN K.BOGACZ DATE 04-Jun-2026 CHECKED H K.GUTTI DATE 04-Jun-2026 APPROVED M.ALYARI DATE 04-Jun-2026
USED ON
MATERIAL
ELECTROLYTIC TOUGH PITCH COPPER
GROUP: Particle Physics Mechanical Support CAGE CODE: OU5R6
REV REVISION CONTROL DOCUMENT DATES SIGNATURES
- F10261983---RCD
DRAWN
APPROVED
DESCRIPTION: CMS HGCAL, COOLING PLATE MACHINING, MASTER FILE, LAYERS 1-20
PROJECT: CMS-HGCAL
DETAIL BJ
SCALE 2:1
DETAIL BJ
BK BK
SECTION BK-BK
DETAIL BL
SCALE 2:1
DETAIL BL
BMBM
SECTION BM-BM
DETAIL BN
SCALE 2:1
DETAIL BN
DETAIL BR
SCALE 2:1
DETAIL BR
DETAIL BU
SCALE 2:1
DETAIL BU
BV BV
SECTION BV-BV
BP BP
SECTION BP-BP
BTBT
SECTION BT-BT
2X 5.00
0.50 A B C
0.50 A B C
0.50 A B C
F
A
1.70 ±0.50
BYBY
SECTION BY-BY
SCALE 2:1
A
1.70 ±0.50
3.80 ±0.50
0.50 A B C
A
1.70 ±0.50
0.50 A B C
0.50 A B C
A4.00 ±0.50
0.50 A B C
A
3.80 ±0.50
0.50 A B C
0.50 A B C
A
3.80 ±0.50
1.70 ±0.50
.0
.0
0.00 0.000.00
.0
B
C
15.42
.7
17.82
.3
75.02
.8
78.52
.8
105.65
.0
114.02
.8
123.24
.8
111.38
.4
159.48
.2
205.03
-3 .4
207.43
-3 .0
264.02
.8
172.02
.8
REV REVISION CONTROL DOCUMENT DATES SIGNATURES
- F10261983---RCD
DRAWN
APPROVED
DESCRIPTION: CMS HGCAL, COOLING PLATE MACHINING, MASTER FILE, LAYERS 1-20
PROJECT: CMS-HGCAL
A
B
B
C
C
D
D
E
E
F
0.50 A B C
3.80 ±0.50
N/A N/A N/A N/A 1°
BREAK ALL SHARP EDGES, MAX: 0.5
DO NOT SCALE DRAWING
DIMENSIONS BASED ON: ASME Y14.5M-2009
MAX MACHINE ALL SURFACES, Ra: 3.2
DRAWING UNITS: MM
THIRD ANGLE PROJECTION
FERMI NATIONAL ACCELERATOR LABORATORY
UNITED STATES DEPARTMENT OF ENERGY
NAME
CMS HGCAL, COOLING PLATE MACHINING, MASTER
FILE, LAYERS 1-20
SCALE SIZE DRAWING NUMBER SHEET REV
N/A A1 F10261983 4 OF 17 -
DRAWN K.BOGACZ DATE 04-Jun-2026 CHECKED H K.GUTTI DATE 04-Jun-2026 APPROVED M.ALYARI DATE 04-Jun-2026
USED ON
MATERIAL
ELECTROLYTIC TOUGH PITCH COPPER
GROUP: Particle Physics Mechanical Support CAGE CODE: OU5R6
REV REVISION CONTROL DOCUMENT DATES SIGNATURES
- F10261983---RCD
DRAWN
APPROVED
DESCRIPTION: CMS HGCAL, COOLING PLATE MACHINING, MASTER FILE, LAYERS 1-20
PROJECT: CMS-HGCAL
DETAIL FH
FERMI NATIONAL ACCELERATOR LABORATORY
UNITED STATES DEPARTMENT OF ENERGY
NAME
CMS HGCAL, COOLING PLATE MACHINING, MASTER
FILE, LAYERS 1-20
SCALE SIZE DRAWING NUMBER SHEET REV
N/A A1 F10261983 4 OF 17 -
UNLESS OTHERWISE SPECIFIED
±X ±X.X ±X.XX ±X/X ±X°
N/A N/A N/A N/A 1°
BREAK ALL SHARP EDGES, MAX: 0.5
DO NOT SCALE DRAWING
DIMENSIONS BASED ON: ASME Y14.5M-2009
MAX MACHINE ALL SURFACES, Ra: 3.2
DRAWING UNITS: MM
THIRD ANGLE PROJECTION
DRAWN K.BOGACZ DATE 04-Jun-2026 CHECKED H K.GUTTI DATE 04-Jun-2026 APPROVED M.ALYARI DATE 04-Jun-2026
USED ON
MATERIAL
ELECTROLYTIC TOUGH PITCH COPPER
GROUP: Particle Physics Mechanical Support CAGE CODE: OU5R6
REV REVISION CONTROL DOCUMENT DATES SIGNATURES
- F10261983---RCD
DRAWN
APPROVED
DESCRIPTION: CMS HGCAL, COOLING PLATE MACHINING, MASTER FILE, LAYERS 1-20
PROJECT: CMS-HGCAL
DETAIL DT
SCALE 2:1
DETAIL DT
DETAIL DM
SCALE 2:1
DETAIL DM
DETAIL DY
SCALE 2:1
DETAIL DY
DETAIL DP
SCALE 2:1
DETAIL DP
2X 5.00
0.50 A B C
0.50 A B C
0.50 A B C
F
0.50 A B C
0.50 A B C
0.50 A B C
0.50 A B C
0.50 A B C
0.50 A B C
DNDN
SECTION DN-DN
DUDU
SECTION DU-DU
DV DV
SECTION DV-DV
DW DW
SECTION DW-DW
DETAIL EC
SCALE 2:1
DETAIL EC
ED ED
SECTION ED-ED
EEEE
SECTION EE-EE
.0
.0
0.00 0.000.00
.0
-6.25
.5
-9.88
.4
2.12
.4
11.34
.4
60.12
.4
92.18
.7
150.70
.9
153.10
.5
194.87
.4
192.87
.4
47.58
.8
-0.52
.0
A
1.70 ±0.50
3.80 ±0.50
A
1.70 ±0.50
A
3.80 ±0.50
1.70 ±0.50
A
3.80 ±0.50
A
1.70 ±0.50
A
4.00 ±0.50
149.58
-3 .6
147.18
-3 .2
REV REVISION CONTROL DOCUMENT DATES SIGNATURES
- F10261983---RCD
DRAWN
APPROVED
DESCRIPTION: CMS HGCAL, COOLING PLATE MACHINING, MASTER FILE, LAYERS 1-20
PROJECT: CMS-HGCAL
A
B
B
C
C
D
D
E
E
F
0.50 A B C
3.80 ±0.50
C
B
FERMI NATIONAL ACCELERATOR LABORATORY
UNITED STATES DEPARTMENT OF ENERGY
NAME
CMS HGCAL, COOLING PLATE MACHINING, MASTER
FILE, LAYERS 1-20
SCALE SIZE DRAWING NUMBER SHEET REV
N/A A1 F10261983 5 OF 17 -
UNLESS OTHERWISE SPECIFIED
±X ±X.X ±X.XX ±X/X ±X°
N/A N/A N/A N/A 1°
BREAK ALL SHARP EDGES, MAX: 0.5
DO NOT SCALE DRAWING
DIMENSIONS BASED ON: ASME Y14.5M-2009
MAX MACHINE ALL SURFACES, Ra: 3.2
DRAWING UNITS: MM
THIRD ANGLE PROJECTION
DRAWN K.BOGACZ DATE 04-Jun-2026 CHECKED H K.GUTTI DATE 04-Jun-2026 APPROVED M.ALYARI DATE 04-Jun-2026
USED ON
MATERIAL
ELECTROLYTIC TOUGH PITCH COPPER
GROUP: Particle Physics Mechanical Support CAGE CODE: OU5R6
REV REVISION CONTROL DOCUMENT DATES SIGNATURES
- F10261983---RCD
DRAWN
APPROVED
DESCRIPTION: CMS HGCAL, COOLING PLATE MACHINING, MASTER FILE, LAYERS 1-20
PROJECT: CMS-HGCAL
N/A N/A N/A N/A 1°
BREAK ALL SHARP EDGES, MAX: 0.5
DO NOT SCALE DRAWING
DIMENSIONS BASED ON: ASME Y14.5M-2009
MAX MACHINE ALL SURFACES, Ra: 3.2
DRAWING UNITS: MM
THIRD ANGLE PROJECTION
DRAWN K.BOGACZ DATE 04-Jun-2026 CHECKED H K.GUTTI DATE 04-Jun-2026 APPROVED M.ALYARI DATE 04-Jun-2026
USED ON
MATERIAL
ELECTROLYTIC TOUGH PITCH COPPER
GROUP: Particle Physics Mechanical Support CAGE CODE: OU5R6
FERMI NATIONAL ACCELERATOR LABORATORY
UNITED STATES DEPARTMENT OF ENERGY
NAME
CMS HGCAL, COOLING PLATE MACHINING, MASTER
FILE, LAYERS 1-20
SCALE SIZE DRAWING NUMBER SHEET REV
N/A A1 F10261983 5 OF 17 -
REV REVISION CONTROL DOCUMENT DATES SIGNATURES
- F10261983---RCD
DRAWN
APPROVED
DESCRIPTION: CMS HGCAL, COOLING PLATE MACHINING, MASTER FILE, LAYERS 1-20
PROJECT: CMS-HGCAL
DETAIL B12
.0
.0
0.00 0.000.00
.0
104.88
.2
84.10
.1
100.68
.8
39.31
.1
37.91
.0
47.73
.9
99.03
.1
96.66
.1
36.57
.5
35.29
.3
92.81
.9
34.06
.7
89.12
.1
85.60
.9
32.88
.6
9.60
.1
26.31
.1
59.60
.3
91.88
.2
87.68
.8
24.91
.0
23.94
.9
23.57
.5
36.55
.4
83.66
.1
22.29
.3
79.81
.9
76.12
.1
21.06
.7
19.88
.6
72.60
.9
.8
B B
C
C
TYPE A
SCALE 2:1
TYPE A
AAAA
SECTION AA
TYPE ATYPE ATYPE A
TYPE ATYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A TYPE A TYPE A TYPE A
TYPE ATYPE ATYPE A
TYPE ATYPE A
A
4.25 ±0.50
0.50 A B C2.00R
TYPE A TYPE A TYPE A TYPE A
TYPE B
SCALE 2:1
TYPE B
2.50 ±0.50
2.00R
0.50 A B C
ABAB
SECTION AB
A
TYPE B
TYPE D
TYPE C
SCALE 2:1
TYPE C
ACAC
SECTION AC
A
3.35 ±0.50
0.50 A B C
2.00R TYPE D
SCALE 2:1
TYPE D
AD AD
SECTION AD
A
2.00 ±0.50
0.50 A B C
2.00R
TYPE C
TYPE C
DETAIL B11
SCALE 1:1
.0
.0
0.00 0.000.00
.0
104.88
.2
84.10
.1
100.68
.8
99.03
.1
96.66
.1
92.81
.9
89.12
.1
59.83
.3
39.31
.1
37.91
.0
47.73
.9
36.57
.5
35.29
.3
34.06
.7
26.31
.1
9.60
.1
24.91
.0
23.94
.9
23.57
.5
59.60
.3
91.88
.2
87.68
.8
83.66
.1
36.55
.4
79.81
.9
22.29
.3
76.12
.1
21.06
.7
46.83
.3
TYPE ATYPE A
TYPE A
TYPE A
TYPE A
TYPE ATYPE A
TYPE A TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A TYPE A TYPE A
TYPE A
TYPE ATYPE A
TYPE A
TYPE A TYPE A
TYPE D
TYPE D
TYPE B
TYPE B
TYPE C
TYPE C
TYPE C
REV REVISION CONTROL DOCUMENT DATES SIGNATURES
- F10261983---RCD
DRAWN
APPROVED
DESCRIPTION: CMS HGCAL, COOLING PLATE MACHINING, MASTER FILE, LAYERS 1-20
PROJECT: CMS-HGCAL
A
B
B
C
C
D
D
E
E
F
F
NAME
CMS HGCAL, COOLING PLATE MACHINING, MASTER
FILE, LAYERS 1-20
SCALE SIZE DRAWING NUMBER SHEET REV
N/A A1 F10261983 6 OF 17 -
UNLESS OTHERWISE SPECIFIED
±X ±X.X ±X.XX ±X/X ±X°
N/A N/A N/A N/A 1°
BREAK ALL SHARP EDGES, MAX: 0.5
DO NOT SCALE DRAWING
DIMENSIONS BASED ON: ASME Y14.5M-2009
MAX MACHINE ALL SURFACES, Ra: 3.2
DRAWING UNITS: MM
THIRD ANGLE PROJECTION
DRAWN K.BOGACZ DATE 04-Jun-2026 CHECKED H K.GUTTI DATE 04-Jun-2026 APPROVED M.ALYARI DATE 04-Jun-2026
USED ON
MATERIAL
ELECTROLYTIC TOUGH PITCH COPPER
GROUP: Particle Physics Mechanical Support CAGE CODE: OU5R6
REV REVISION CONTROL DOCUMENT DATES SIGNATURES
- F10261983---RCD
DRAWN
APPROVED
DESCRIPTION: CMS HGCAL, COOLING PLATE MACHINING, MASTER FILE, LAYERS 1-20
PROJECT: CMS-HGCAL
NAME
CMS HGCAL, COOLING PLATE MACHINING, MASTER
FILE, LAYERS 1-20
SCALE SIZE DRAWING NUMBER SHEET REV
N/A A1 F10261983 6 OF 17 -
DRAWN K.BOGACZ DATE 04-Jun-2026 CHECKED H K.GUTTI DATE 04-Jun-2026 APPROVED M.ALYARI DATE 04-Jun-2026
USED ON
MATERIAL
ELECTROLYTIC TOUGH PITCH COPPER
GROUP: Particle Physics Mechanical Support CAGE CODE: OU5R6
UNLESS OTHERWISE SPECIFIED
±X ±X.X ±X.XX ±X/X ±X°
N/A N/A N/A N/A 1°
BREAK ALL SHARP EDGES, MAX: 0.5
DO NOT SCALE DRAWING
DIMENSIONS BASED ON: ASME Y14.5M-2009
MAX MACHINE ALL SURFACES, Ra: 3.2
DRAWING UNITS: MM
THIRD ANGLE PROJECTION
REV REVISION CONTROL DOCUMENT DATES SIGNATURES
- F10261983---RCD
DRAWN
APPROVED
DESCRIPTION: CMS HGCAL, COOLING PLATE MACHINING, MASTER FILE, LAYERS 1-20
PROJECT: CMS-HGCAL
DETAIL D8
DETAIL A6
SCALE 1:1
DETAIL E8
SCALE 1:1
DETAIL A5
SCALE 1:1
.0
.0
0.00 0.000.00
.0
82.22
.4
31.76
.2
73.42 78.99
.3
62.57
.0
30.68
.1
3.70
.5
20.13
.2
17.68
.1
34.23
.0
75.89
.5
69.22
.0
65.99
.3
62.89
.5
0.00
.7
C B .0
.0
0.00 0.000.00
.0
32.57
.0
10.00
.5
30.90
.3
43.90
.3
45.57
.0
91.40
.2
123.64
.6
75.00
.5
106.60
134.60
118.64
.6
42.31
.5
40.78
.6
109.27
.6
113.85
.7
110.64
.6
100.50
.8
105.64
.6
100.85
.7
29.31
.5
96.27
.6
27.78
.6
.7
B C
B
C
.0
.0
0.00 0.000.00
.0
69.22
.0
65.99
.3
62.98
.7
34.23 .0
20.13
.2
17.68
.1
3.70
.5
31.76
.2
30.68
.1
62.57
.0
77.98
.7
78.99
.3
73.42
.5
82.22
.4
.2
TYPE D
TYPE D
TYPE D
TYPE D
TYPE D
TYPE D
C
B
.0
.0
0.00 0.000.00
.0
145.98
.9
53.02
.9
81.51
.0
128.50
.0
140.03
.9
102.45
.0
51.04
.0
49.14
.2
134.33
.9
122.37
.1
128.87
.1
47.32
.6
34.32
.6
36.14
.2
38.04
.0
13.01
.0
40.02
.9
132.98
.9
119.83
.8
127.03
.9
121.33
.9
115.87
.1
.6
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE D
TYPE C
TYPE C
TYPE D
TYPE A
TYPE A
TYPE B
TYPE A
TYPE A
TYPE A
TYPE ATYPE A
TYPE A
TYPE A TYPE A TYPE A
TYPE A TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE C
TYPE A
TYPE A
TYPE A
TYPE C
TYPE C
TYPE A
TYPE B
TYPE A
TYPE A
TYPE A
TYPE C
TYPE B
TYPE C
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE C
TYPE B
TYPE A
TYPE A
TYPE C
TYPE A
TYPE C
TYPE C
REV REVISION CONTROL DOCUMENT DATES SIGNATURES
- F10261983---RCD
DRAWN
APPROVED
DESCRIPTION: CMS HGCAL, COOLING PLATE MACHINING, MASTER FILE, LAYERS 1-20
PROJECT: CMS-HGCAL
A
B
B
C
C
D
D
E
E
F
DRAWN K.BOGACZ DATE 04-Jun-2026 CHECKED H K.GUTTI DATE 04-Jun-2026 APPROVED M.ALYARI DATE 04-Jun-2026
USED ON
MATERIAL
ELECTROLYTIC TOUGH PITCH COPPER
GROUP: Particle Physics Mechanical Support CAGE CODE: OU5R6
UNLESS OTHERWISE SPECIFIED
±X ±X.X ±X.XX ±X/X ±X°
N/A N/A N/A N/A 1°
BREAK ALL SHARP EDGES, MAX: 0.5
DO NOT SCALE DRAWING
DIMENSIONS BASED ON: ASME Y14.5M-2009
MAX MACHINE ALL SURFACES, Ra: 3.2
DRAWING UNITS: MM
THIRD ANGLE PROJECTION
FERMI NATIONAL ACCELERATOR LABORATORY
UNITED STATES DEPARTMENT OF ENERGY
NAME
CMS HGCAL, COOLING PLATE MACHINING, MASTER
FILE, LAYERS 1-20
SCALE SIZE DRAWING NUMBER SHEET REV
N/A A1 F10261983 7 OF 17 -
REV REVISION CONTROL DOCUMENT DATES SIGNATURES
- F10261983---RCD
DRAWN
APPROVED
DESCRIPTION: CMS HGCAL, COOLING PLATE MACHINING, MASTER FILE, LAYERS 1-20
PROJECT: CMS-HGCAL
N/A N/A N/A N/A 1°
BREAK ALL SHARP EDGES, MAX: 0.5
DO NOT SCALE DRAWING
DIMENSIONS BASED ON: ASME Y14.5M-2009
MAX MACHINE ALL SURFACES, Ra: 3.2
DRAWING UNITS: MM
THIRD ANGLE PROJECTION
DRAWN K.BOGACZ DATE 04-Jun-2026 CHECKED H K.GUTTI DATE 04-Jun-2026 APPROVED M.ALYARI DATE 04-Jun-2026
USED ON
MATERIAL
ELECTROLYTIC TOUGH PITCH COPPER
GROUP: Particle Physics Mechanical Support CAGE CODE: OU5R6
FERMI NATIONAL ACCELERATOR LABORATORY
UNITED STATES DEPARTMENT OF ENERGY
NAME
CMS HGCAL, COOLING PLATE MACHINING, MASTER
FILE, LAYERS 1-20
SCALE SIZE DRAWING NUMBER SHEET REV
N/A A1 F10261983 7 OF 17 -
REV REVISION CONTROL DOCUMENT DATES SIGNATURES
- F10261983---RCD
DRAWN
APPROVED
DESCRIPTION: CMS HGCAL, COOLING PLATE MACHINING, MASTER FILE, LAYERS 1-20
PROJECT: CMS-HGCAL
.0
.0
0.00 0.000.00
.0
172.58
.0
61.90
.9
59.53
.5
165.49
.1
48.90
.9
46.53
.5
44.27
.2
158.70
.7
135.40
.5
82.16
.5
152.21
.8
55.10
.6
17.18
.4
42.10
.6
139.21
.8
145.70
.7
152.49
.1
159.58
.0
88.10
.5
13.66
.5
57.27
.2
.2
B
C
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A TYPE A
TYPE A
TYPE A
TYPE ATYPE A
TYPE A
TYPE A
TYPE A
TYPE A
.0
.0
0.00 0.000.00
.0
144.93
.7
61.90
.9
59.53
.5
165.49
.1
158.70
.7
57.27
.2
82.16
.5
135.40
.5
152.21
.8
55.10
.6
17.18
.4
13.66
.5
42.10
.6
88.10
.5
44.27
.2
46.53
.5
48.90
.9
159.58
.0
152.49
.1
145.70
.7
139.21
.8
.2
.0
.0
0.00 0.000.00
.0
172.58
.0
61.90
.9
59.53
.5
165.49
.1
57.27
.2
158.70
.7
135.40
.5
82.16
.5
48.90
.9
46.53
.5
44.27
.2
131.93
.7
152.49
.1
145.70
.7
88.10
.5
13.66
.5
152.21
.8
55.10
.6
17.18
.4
42.10
.6
139.21
.8
0.00
.2
C
CB
B
DETAIL G8L
SCALE 1:2
DETAIL G8R
SCALE 1:2
DETAIL G8
SCALE 1:2
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE ATYPE A
TYPE A
TYPE D
TYPE D
TYPE D
TYPE D
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE DTYPE C
TYPE A
TYPE D
TYPE C
TYPE B
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE B
TYPE C
TYPE C
TYPE C
TYPE B
TYPE C
REV REVISION CONTROL DOCUMENT DATES SIGNATURES
- F10261983---RCD
DRAWN
APPROVED
DESCRIPTION: CMS HGCAL, COOLING PLATE MACHINING, MASTER FILE, LAYERS 1-20
PROJECT: CMS-HGCAL
A
B
B
C
C
D
D
E
E
F
DRAWN
APPROVED
DESCRIPTION: CMS HGCAL, COOLING PLATE MACHINING, MASTER FILE, LAYERS 1-20
PROJECT: CMS-HGCAL
TYPE A
DETAIL G3
SCALE 1:1
DETAIL G3L
SCALE 1:1
DETAIL G3R
SCALE 1:1
DETAIL C5
SCALE 1:1
.0
.0
0.00 0.000.00
.0
104.88
.2
39.31
.1
74.10
.1
100.68
.8
49.50
.0
37.91
.0
67.94
.4
26.31
.1
24.91
.0
5.05
.6
91.88
.2
87.68
.8
54.94
.4
.6
.0
.0
0.00 0.000.00
.0
135.40
.4
106.90
.4
152.21
.8
82.16
.4
55.10
.6
17.18
.4
13.66
.4
93.90
.4
88.10
.4
111.50
.2
42.10
.6
.5
B
B B
C C
C
.0
.0
0.00 0.000.00
.0
106.90
.4
135.40
152.21
.8
55.10
.6
82.16
.4
17.18
.4
13.66
.4
42.10
.6
88.10
.4
93.90
.4
139.21
.8
.5
.0
.0
0.00 0.000.00
.0
135.40
106.90
.4
82.16
.4
116.50
.5
55.10
.6
17.18
.4
13.66
.4
42.10
.6
88.10
.4
93.90
.4
139.21
.8
.5
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE C
TYPE D
TYPE B
TYPE C
TYPE D
TYPE C
TYPE D
TYPE B
TYPE C
TYPE D
TYPE ATYPE B
TYPE A
TYPE A
TYPE D
TYPE C
TYPE C
TYPE A
TYPE D
TYPE A
TYPE A
TYPE A
TYPE DTYPE A
TYPE A
TYPE C
TYPE D
TYPE A
TYPE C
TYPE A
TYPE B
TYPE A
UNLESS OTHERWISE SPECIFIED
±X ±X.X ±X.XX ±X/X ±X°
N/A N/A N/A N/A 1°
BREAK ALL SHARP EDGES, MAX: 0.5
DO NOT SCALE DRAWING
DIMENSIONS BASED ON: ASME Y14.5M-2009
MAX MACHINE ALL SURFACES, Ra: 3.2
DRAWING UNITS: MM
THIRD ANGLE PROJECTION
DRAWN K.BOGACZ DATE 04-Jun-2026 CHECKED H K.GUTTI DATE 04-Jun-2026 APPROVED M.ALYARI DATE 04-Jun-2026
USED ON
MATERIAL
ELECTROLYTIC TOUGH PITCH COPPER
GROUP: Particle Physics Mechanical Support CAGE CODE: OU5R6
FERMI NATIONAL ACCELERATOR LABORATORY
UNITED STATES DEPARTMENT OF ENERGY
NAME
CMS HGCAL, COOLING PLATE MACHINING, MASTER
FILE, LAYERS 1-20
SCALE SIZE DRAWING NUMBER SHEET REV
N/A A1 F10261983 8 OF 17 -
REV REVISION CONTROL DOCUMENT DATES SIGNATURES
- F10261983---RCD
DRAWN
APPROVED
DESCRIPTION: CMS HGCAL, COOLING PLATE MACHINING, MASTER FILE, LAYERS 1-20
PROJECT: CMS-HGCAL
A
B
B
C
C
D
D
E
E
F
DRAWN
APPROVED
DESCRIPTION: CMS HGCAL, COOLING PLATE MACHINING, MASTER FILE, LAYERS 1-20
PROJECT: CMS-HGCAL
DETAIL K8
DETAIL K8R
SCALE 1:1DETAIL K8L
SCALE 1:1
.0
.0
0.00 0.000.00
.0
94.91
.2
112.93
65.93
.1
35.98
.9
35.13
.1
92.37
.7
88.93
.6
89.89
.5
105.35
.8
143.43
.9
141.45
.0
87.52
.9
34.30
.9
33.91
.1
22.98
.9
33.93
.1
22.13
.1
17.43
.6
21.30
.9
31.66
.8
20.51
.3
74.52
.9
76.89
.5
79.37
.7
81.91
.2
140.76
.8
136.54
.1
132.66
.3
128.45
.0
B
C
C
B
.0
.0
0.00 0.000.00
.0
153.76
.8
149.54
.1
145.66
.3
141.45
.0
105.35
.8
112.93
.1
94.91
.2
92.37
.7
88.93
.6
89.89
.5
87.52
.9
65.93
.1
35.98
.9
35.13
.1
34.30
.9
33.91
.1
22.98
.9
33.93
.1
22.13
.1
17.43
.6
21.30
.9
31.66
.8
20.51
.3
81.91
.2
79.37
.7
76.89
.5
74.52
.9
130.43
.9
128.45
.0
TYPE A TYPE A TYPE A
TYPE A
TYPE A
TYPE D
TYPE A
TYPE A
TYPE A
TYPE CTYPE A
TYPE A
TYPE C
TYPE A
TYPE A
TYPE A
TYPE B
TYPE A
TYPE A TYPE C TYPE A
TYPE A
TYPE D
TYPE A
TYPE A
TYPE A
TYPE A
TYPE B
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A TYPE C TYPE A
TYPE D
TYPE A
TYPE ATYPE A
TYPE C
TYPE A
TYPE B
TYPE A
TYPE D
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE B
TYPE A
TYPE A
TYPE A
TYPE B
TYPE A
TYPE A
TYPE B
TYPE A
TYPE A TYPE C
TYPE A
TYPE A
TYPE D
TYPE A
TYPE A
TYPE A
TYPE A
TYPE D
TYPE ATYPE A TYPE C
TYPE A
TYPE A
TYPE A
TYPE A
TYPE ATYPE A
TYPE C
TYPE A
TYPE A
.0
.0
0.00 0.000.00
.0
153.76
.8
94.91
.2
112.93
65.93
.1
35.98
.9
35.13
.1
92.37
.7
88.93
.6
149.54
.1
145.66
.3
89.89
.5
105.35
.8
141.45
.0
87.52
.9
34.30
.9
33.91
.1
22.98
.9
81.91
.2
33.93
.1
22.13
.1
17.43
.6
79.37
.7
76.89
.5
21.30
.9
20.51
.3
31.66
.8
74.52
.9
140.76
.8
136.54 .1
132.66
.3
128.45
.0
.2
TYPE C
UNLESS OTHERWISE SPECIFIED
±X ±X.X ±X.XX ±X/X ±X°
N/A N/A N/A N/A 1°
BREAK ALL SHARP EDGES, MAX: 0.5
DO NOT SCALE DRAWING
DIMENSIONS BASED ON: ASME Y14.5M-2009
MAX MACHINE ALL SURFACES, Ra: 3.2
DRAWING UNITS: MM
THIRD ANGLE PROJECTION
DRAWN K.BOGACZ DATE 04-Jun-2026 CHECKED H K.GUTTI DATE 04-Jun-2026 APPROVED M.ALYARI DATE 04-Jun-2026
USED ON
MATERIAL
ELECTROLYTIC TOUGH PITCH COPPER
GROUP: Particle Physics Mechanical Support CAGE CODE: OU5R6
FERMI NATIONAL ACCELERATOR LABORATORY
UNITED STATES DEPARTMENT OF ENERGY
NAME
CMS HGCAL, COOLING PLATE MACHINING, MASTER
FILE, LAYERS 1-20
SCALE SIZE DRAWING NUMBER SHEET REV
N/A A1 F10261983 9 OF 17 -
REV REVISION CONTROL DOCUMENT DATES SIGNATURES
- F10261983---RCD
DRAWN
APPROVED
DESCRIPTION: CMS HGCAL, COOLING PLATE MACHINING, MASTER FILE, LAYERS 1-20
PROJECT: CMS-HGCAL
A
B
B
C
C
D
D
E
E
F
NAME
CMS HGCAL, COOLING PLATE MACHINING, MASTER
FILE, LAYERS 1-20
SCALE SIZE DRAWING NUMBER SHEET REV
N/A A1 F10261983 10 OF 17 -
UNLESS OTHERWISE SPECIFIED
±X ±X.X ±X.XX ±X/X ±X°
N/A N/A N/A N/A 1°
BREAK ALL SHARP EDGES, MAX: 0.5
DO NOT SCALE DRAWING
DIMENSIONS BASED ON: ASME Y14.5M-2009
MAX MACHINE ALL SURFACES, Ra: 3.2
DRAWING UNITS: MM
THIRD ANGLE PROJECTION
DRAWN K.BOGACZ DATE 04-Jun-2026 CHECKED H K.GUTTI DATE 04-Jun-2026 APPROVED M.ALYARI DATE 04-Jun-2026
USED ON
MATERIAL
ELECTROLYTIC TOUGH PITCH COPPER
GROUP: Particle Physics Mechanical Support CAGE CODE: OU5R6
REV REVISION CONTROL DOCUMENT DATES SIGNATURES
- F10261983---RCD
DRAWN
APPROVED
DESCRIPTION: CMS HGCAL, COOLING PLATE MACHINING, MASTER FILE, LAYERS 1-20
PROJECT: CMS-HGCAL
DETAIL G7
DETAIL G7L
SCALE 1:1
C
.0
.0
0.00 0.000.00
.0
116.06
.8
138.30
.3
158.70
.3
59.53
.1
57.27
.8
82.16
.1
135.40
152.21
.4
55.10
.2
17.18
.0
13.66
.1
42.10
.2
44.27
.8
46.53
.1
103.06
.8
125.31 .2
145.70
.3
88.10
.1
139.21
.4
.8
B
B
C
.0
.0
0.00 0.000.00
.0
116.06
.8
138.3
.3
59.53
.1
46.53
.1
158.7
.3
135.4
.1
152.21
.4
82.16
.1
57.27
.8
55.1
.2
44.27
.8
13.66
.1
42.1
.2
90.1
.1
139.21
.4
145.7
.3
125.31
.2
103.06
.8
.8
17.18
.0
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE B
TYPE A
TYPE C
TYPE A
TYPE D
TYPE C
TYPE A
TYPE A
TYPE D
TYPE A
TYPE ATYPE A
TYPE A
TYPE A TYPE A
TYPE A
TYPE A
TYPE A TYPE A TYPE C
TYPE A
TYPE D
TYPE C
TYPE A
TYPE A
TYPE D
TYPE A
TYPE A
TYPE B
TYPE A
TYPE A
TYPE A
TYPE A
REV REVISION CONTROL DOCUMENT DATES SIGNATURES
- F10261983---RCD
DRAWN
APPROVED
DESCRIPTION: CMS HGCAL, COOLING PLATE MACHINING, MASTER FILE, LAYERS 1-20
PROJECT: CMS-HGCAL
A
B
B
C
C
D
D
E
E
F
DRAWN
APPROVED
DESCRIPTION: CMS HGCAL, COOLING PLATE MACHINING, MASTER FILE, LAYERS 1-20
PROJECT: CMS-HGCAL
B
C
DETAIL K6
SCALE 1:1
DETAIL G7R
SCALE 1:1
.0
.0
0.00 0.000.00
.0
112.13
.7
149.54
.3
110.48
.7
88.93
.2
89.89
.1
145.66
.9
105.35
.4
87.52
.5
141.45
.6
33.91
.7
34.30
.5
35.13
.2
22.13
.2
17.43
.2
21.30
.5
31.66
.4
20.51
.9
74.52
.5
76.89
.1
79.37
.6
136.54
.3
132.66
.9
128.45
.6
.0
.0
.0
0.00 0.000.00
.0
116.06
.8
138.30
.3
158.70
.3
59.53
.1
57.27
.8
46.53
.1
44.27
.8
135.40
.1
82.16
.1
55.10
.2
152.21
.4
17.18
.0
13.66
.1
42.10
.2
88.10
.1
125.31 .2
103.06
.8
145.70
.3
139.21
.4
.8
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE D
TYPE A
TYPE A
TYPE C
TYPE D
TYPE A
TYPE CTYPE A
TYPE B
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE B
TYPE C
TYPE A
TYPE A TYPE A
TYPE A
TYPE D
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE D
TYPE A
TYPE A
TYPE A
TYPE C
TYPE A
TYPE A TYPE A
UNLESS OTHERWISE SPECIFIED
±X ±X.X ±X.XX ±X/X ±X°
N/A N/A N/A N/A 1°
BREAK ALL SHARP EDGES, MAX: 0.5
DO NOT SCALE DRAWING
DIMENSIONS BASED ON: ASME Y14.5M-2009
MAX MACHINE ALL SURFACES, Ra: 3.2
DRAWING UNITS: MM
THIRD ANGLE PROJECTION
DRAWN K.BOGACZ DATE 04-Jun-2026 CHECKED H K.GUTTI DATE 04-Jun-2026 APPROVED M.ALYARI DATE 04-Jun-2026
USED ON
MATERIAL
ELECTROLYTIC TOUGH PITCH COPPER
GROUP: Particle Physics Mechanical Support CAGE CODE: OU5R6
FERMI NATIONAL ACCELERATOR LABORATORY
UNITED STATES DEPARTMENT OF ENERGY
NAME
CMS HGCAL, COOLING PLATE MACHINING, MASTER
FILE, LAYERS 1-20
SCALE SIZE DRAWING NUMBER SHEET REV
N/A A1 F10261983 11 OF 17 -
REV REVISION CONTROL DOCUMENT DATES SIGNATURES
- F10261983---RCD
DRAWN
APPROVED
DESCRIPTION: CMS HGCAL, COOLING PLATE MACHINING, MASTER FILE, LAYERS 1-20
PROJECT: CMS-HGCAL
A
B
B
C
C
D
D
E
E
F
N/A N/A N/A N/A 1°
BREAK ALL SHARP EDGES, MAX: 0.5
DO NOT SCALE DRAWING
DIMENSIONS BASED ON: ASME Y14.5M-2009
MAX MACHINE ALL SURFACES, Ra: 3.2
DRAWING UNITS: MM
THIRD ANGLE PROJECTION
FERMI NATIONAL ACCELERATOR LABORATORY
UNITED STATES DEPARTMENT OF ENERGY
NAME
CMS HGCAL, COOLING PLATE MACHINING, MASTER
FILE, LAYERS 1-20
SCALE SIZE DRAWING NUMBER SHEET REV
N/A A1 F10261983 12 OF 17 -
DRAWN K.BOGACZ DATE 04-Jun-2026 CHECKED H K.GUTTI DATE 04-Jun-2026 APPROVED M.ALYARI DATE 04-Jun-2026
USED ON
MATERIAL
ELECTROLYTIC TOUGH PITCH COPPER
GROUP: Particle Physics Mechanical Support CAGE CODE: OU5R6
REV REVISION CONTROL DOCUMENT DATES SIGNATURES
- F10261983---RCD
DRAWN
APPROVED
DESCRIPTION: CMS HGCAL, COOLING PLATE MACHINING, MASTER FILE, LAYERS 1-20
PROJECT: CMS-HGCAL
B C
DETAIL K6R
SCALE 1:1
DETAIL K6L
SCALE 1:1
DETAIL G5
SCALE 1:1
C
B
.0
.0
0.00 0.000.00
.0
112.13
.7
149.54
.3
145.66
.9
110.48
.7
88.93
.2
89.89
.1
105.35
.4
141.45
.6
87.52
.5
33.91
.7
34.30
.5
35.13
.2
22.13
.2
17.43
.2
21.30
.5
31.66
.4
20.51
.9
74.52
.5
76.89
.1
79.37
.6
101.50
.9
.0
.0
.0
0.00 0.000.00
.0
112.13
.7
110.48
.7
88.93
.2
89.89
.1
105.35
114.50
.9
87.52
.5
33.91
.7
34.30
.5
35.13
.2
22.13
.2
17.43
.2
21.30
.5
31.66
.4
20.51
.9
79.37
.6
76.89
.1
74.52
.5
128.45
.6
132.66
.9
136.54
.3
.0
.0
.0
0.00 0.000.00
.0
111.38
.7
132.67
.4
135.40
57.27
.8
82.16
.0
152.22
.4
55.10
.1
17.18
.9
13.66
.0
98.38
.7
44.27
.8
119.67
.4
88.10
.1
42.10
.1
139.21
.4
.7
TYPE A TYPE A
TYPE A
TYPE A
TYPE C
TYPE A
TYPE A
TYPE D
TYPE A
TYPE ATYPE A
TYPE A
TYPE C
TYPE A
TYPE A
TYPE D
TYPE A
TYPE A
TYPE B
TYPE A TYPE A
TYPE A
TYPE B
TYPE A
TYPE A
TYPE A
TYPE D
TYPE A
TYPE A
TYPE A
TYPE A TYPE A
TYPE C
TYPE A
TYPE A
TYPE C
TYPE A
TYPE D
TYPE A
TYPE A
TYPE A TYPE A
TYPE A
TYPE A
TYPE A TYPE C
TYPE A
TYPE D
TYPE D
TYPE A
TYPE A
TYPE A TYPE C
TYPE B
TYPE A
TYPE A
TYPE A
REV REVISION CONTROL DOCUMENT DATES SIGNATURES
- F10261983---RCD
DRAWN
APPROVED
DESCRIPTION: CMS HGCAL, COOLING PLATE MACHINING, MASTER FILE, LAYERS 1-20
PROJECT: CMS-HGCAL
A
B
B
C
C
D
D
E
E
F
N/A N/A N/A N/A 1°
BREAK ALL SHARP EDGES, MAX: 0.5
DO NOT SCALE DRAWING
DIMENSIONS BASED ON: ASME Y14.5M-2009
MAX MACHINE ALL SURFACES, Ra: 3.2
DRAWING UNITS: MM
THIRD ANGLE PROJECTION
FERMI NATIONAL ACCELERATOR LABORATORY
UNITED STATES DEPARTMENT OF ENERGY
NAME
CMS HGCAL, COOLING PLATE MACHINING, MASTER
FILE, LAYERS 1-20
SCALE SIZE DRAWING NUMBER SHEET REV
N/A A1 F10261983 13 OF 17 -
DRAWN K.BOGACZ DATE 04-Jun-2026 CHECKED H K.GUTTI DATE 04-Jun-2026 APPROVED M.ALYARI DATE 04-Jun-2026
USED ON
MATERIAL
ELECTROLYTIC TOUGH PITCH COPPER
GROUP: Particle Physics Mechanical Support CAGE CODE: OU5R6
REV REVISION CONTROL DOCUMENT DATES SIGNATURES
- F10261983---RCD
DRAWN
APPROVED
DESCRIPTION: CMS HGCAL, COOLING PLATE MACHINING, MASTER FILE, LAYERS 1-20
PROJECT: CMS-HGCAL
DETAIL G5L
SCALE 1:1 DETAIL G5R
SCALE 1:1
B B
C C
.0
.0
0.00 0.000.00
.0
111.38
.7
132.67
.4
135.40
152.22
.4
57.27
.8
82.16
.0
55.10
.1
17.18
.9
13.66
.0
44.27
.8
98.38
.7
88.10
.1
119.67
.4
42.10
.1
139.21
.4
.7
.0
.0
0.00 0.000.00
.0
111.38
.7
132.67
.4
135.40
152.22
.4
82.16
.0
57.27
.8
55.10
.1
17.18
.9
13.66
44.27
.8
42.10
.1
98.38
.7
119.67
.4
88.10
.1
139.21
.4
.7
TYPE A
TYPE A
TYPE A TYPE D
TYPE A
TYPE A
TYPE D
TYPE C
TYPE ATYPE A
TYPE A
TYPE B
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE C
TYPE A
TYPE D
TYPE DTYPE A
TYPE A
TYPE A
TYPE A
TYPE B
TYPE A
TYPE C
TYPE C
REV REVISION CONTROL DOCUMENT DATES SIGNATURES
- F10261983---RCD
DRAWN
APPROVED
DESCRIPTION: CMS HGCAL, COOLING PLATE MACHINING, MASTER FILE, LAYERS 1-20
PROJECT: CMS-HGCAL
A
B
B
C
C
D
D
E
E
F
N/A N/A N/A N/A 1°
BREAK ALL SHARP EDGES, MAX: 0.5
DO NOT SCALE DRAWING
DIMENSIONS BASED ON: ASME Y14.5M-2009
MAX MACHINE ALL SURFACES, Ra: 3.2
DRAWING UNITS: MM
THIRD ANGLE PROJECTION
FERMI NATIONAL ACCELERATOR LABORATORY
UNITED STATES DEPARTMENT OF ENERGY
NAME
CMS HGCAL, COOLING PLATE MACHINING, MASTER
FILE, LAYERS 1-20
SCALE SIZE DRAWING NUMBER SHEET REV
N/A A1 F10261983 14 OF 17 -
DRAWN K.BOGACZ DATE 04-Jun-2026 CHECKED H K.GUTTI DATE 04-Jun-2026 APPROVED M.ALYARI DATE 04-Jun-2026
USED ON
MATERIAL
ELECTROLYTIC TOUGH PITCH COPPER
GROUP: Particle Physics Mechanical Support CAGE CODE: OU5R6
REV REVISION CONTROL DOCUMENT DATES SIGNATURES
- F10261983---RCD
DRAWN
APPROVED
DESCRIPTION: CMS HGCAL, COOLING PLATE MACHINING, MASTER FILE, LAYERS 1-20
PROJECT: CMS-HGCAL
DETAIL J12
DETAIL K12
SCALE 1:1
.0
.0
0.00 0.000.00
.0
137.58
.8
133.80
.8
82.92
.8
90.23
.1
130.39
.9
129.82
.6
126.34
.5
107.70
78.68
80.75
.9
123.16
.1
76.54
.4
74.54
.1
119.84
.7
50.70
.4
30.55
.3
31.25
.2
31.98
.3
41.81
.1
29.83
.4
29.19
.7
16.19
.7
16.83
.4
17.39
.4
17.55 .3
18.25
.2
18.98
.3
17.73
.1
61.54
.1
63.54
.4
65.62
.7
67.75 .9
69.92
.8
87.97
.0
122.76
.8
120.80
.8
117.39
.8
113.63
.5
110.16
.1
106.84
.7
.0
.0
0.00 0.000.00
.0
162.58
.8
100.20
.4
37.74
.3
36.84
.2
97.50
.5
158.07
.9
153.76
.2
122.93
94.91
.8
65.93
.9
35.98
.0
35.13
.2
92.37
.8
88.93
.7
149.54
.1
145.66
.4
89.89
.6
105.35
.9
87.52
.0
141.45
.1
33.91
.2
34.30
.0
20.51
.4
31.66
.9
21.30
.0
17.43
.7
22.13
.2
22.98
.0
33.93
.9
23.84
.2
24.74
.3
87.20
.4
84.50
.5
81.91
.8
79.37
.8
76.89
.6
74.52
.0
128.45
.1
132.66
.4
136.54
.1
140.76
.2
145.07
.9
149.58
.8
.3
B C
CB
TYPE A
TYPE A TYPE A TYPE D TYPE A
TYPE A
TYPE A
TYPE B
TYPE A
TYPE A
TYPE C
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE B
TYPE A
TYPE A
TYPE A
TYPE A
TYPE C
TYPE A
TYPE A TYPE A
TYPE C
TYPE A
TYPE A
TYPE D
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A TYPE A
TYPE A
TYPE A
TYPE A TYPE A
TYPE A
TYPE A TYPE A
TYPE A
TYPE A TYPE A
TYPE B
TYPE B
TYPE A
TYPE A
TYPE A
TYPE A
TYPE D
TYPE A
TYPE A
TYPE A
TYPE C
TYPE A
TYPE ATYPE A
TYPE A
TYPE A
TYPE ATYPE A
TYPE A TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE C
TYPE A
TYPE C TYPE A
TYPE A TYPE A
TYPE D
TYPE A
TYPE A
TYPE ATYPE A
REV REVISION CONTROL DOCUMENT DATES SIGNATURES
- F10261983---RCD
DRAWN
APPROVED
DESCRIPTION: CMS HGCAL, COOLING PLATE MACHINING, MASTER FILE, LAYERS 1-20
PROJECT: CMS-HGCAL
A
B
B
C
C
D
D
E
E
F
DRAWN
APPROVED
DESCRIPTION: CMS HGCAL, COOLING PLATE MACHINING, MASTER FILE, LAYERS 1-20
PROJECT: CMS-HGCAL
DETAIL K11
DETAIL K11L
SCALE 1:1
C
C
B
B
.0
.0
0.00 0.000.00
.0
130.47
.9
158.07
.9
153.76
.2
112.93
.9
94.91
.8
97.50
.5
149.54
.1
145.66
.4
141.45
.1
105.35
.9
89.89
.6
88.93
.7
92.37
.8
87.52
.0
65.93
.9
35.98
.0
35.13
.2
34.30
.0
33.91
.2
36.84
.2
6.50
.5
23.84
.2
22.98
.0
33.93
.9
22.13
.2
17.43
.7
21.30
.0
79.37
.8
81.91
.8
84.50
.5
76.89
.6
31.66
.9
20.51
.4
74.52
.0
128.45
.1
132.66
.4
136.54
.1
140.76
.2
145.07
.9
117.47
.9
.3
.0
.0
0.00 0.000.00
.0
99.50
.4
97.50
.5
94.91
.8
36.84
.2
35.98
.0
65.93
.9
112.93
.9
149.54
.1
92.37
.8
35.13
.2
88.93
.7
145.66
.4
89.89
.6
105.35
.9
87.52
.0
141.45
.1
34.30
.0
33.91
.2
23.84
.2
84.50
.5
117.47
.9
81.91
.8
22.98
.0
33.93
.9
79.37
.8
22.13
.2
17.43
.7
21.30
.0
76.89
.6
31.66
.9
20.51
.4
74.52
.0
145.07
.9
140.76
.2
136.54
.1
132.66
.4
128.45
.1
.3
TYPE A
TYPE A TYPE A
TYPE A
TYPE C
TYPE A
TYPE A
TYPE A
TYPE A TYPE A
TYPE A
TYPE A
TYPE A
TYPE C
TYPE A TYPE A
TYPE D
TYPE ATYPE A
TYPE A TYPE A
TYPE B
TYPE ATYPE A
TYPE A
TYPE A
TYPE A
TYPE B
TYPE A
TYPE A
TYPE C
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE D
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE C
TYPE A TYPE A TYPE A
TYPE C TYPE A
TYPE D
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A TYPE A
TYPE B
TYPE A
TYPE A TYPE A
TYPE A
TYPE B
TYPE A TYPE A
TYPE A
TYPE C
TYPE A
TYPE D
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
6.50
.5
UNLESS OTHERWISE SPECIFIED
±X ±X.X ±X.XX ±X/X ±X°
N/A N/A N/A N/A 1°
BREAK ALL SHARP EDGES, MAX: 0.5
DO NOT SCALE DRAWING
DIMENSIONS BASED ON: ASME Y14.5M-2009
MAX MACHINE ALL SURFACES, Ra: 3.2
DRAWING UNITS: MM
THIRD ANGLE PROJECTION
DRAWN K.BOGACZ DATE 04-Jun-2026 CHECKED H K.GUTTI DATE 04-Jun-2026 APPROVED M.ALYARI DATE 04-Jun-2026
USED ON
MATERIAL
ELECTROLYTIC TOUGH PITCH COPPER
GROUP: Particle Physics Mechanical Support CAGE CODE: OU5R6
FERMI NATIONAL ACCELERATOR LABORATORY
UNITED STATES DEPARTMENT OF ENERGY
NAME
CMS HGCAL, COOLING PLATE MACHINING, MASTER
FILE, LAYERS 1-20
SCALE SIZE DRAWING NUMBER SHEET REV
N/A A1 F10261983 15 OF 17 -
REV REVISION CONTROL DOCUMENT DATES SIGNATURES
- F10261983---RCD
DRAWN
APPROVED
DESCRIPTION: CMS HGCAL, COOLING PLATE MACHINING, MASTER FILE, LAYERS 1-20
PROJECT: CMS-HGCAL
A
B
B
C
C
D
D
E
E
F
DRAWN
APPROVED
DESCRIPTION: CMS HGCAL, COOLING PLATE MACHINING, MASTER FILE, LAYERS 1-20
PROJECT: CMS-HGCAL
DETAIL K11R
DETAIL K12L
SCALE 1:1
B B
C
C
.0
.0
0.00 0.000.00
.0
130.47
.9
158.07
.9
97.50
.5
36.84
.2
35.98
.0
94.91
.8
153.76
.2
65.93
.9
112.93
149.54
.1
92.37
.8
35.13
.2
88.93
.7
89.89
.6
34.30
.0
145.66
.4
105.35
.9
141.45
.1
87.52
.0
33.91
.2
20.51
.4
31.66
.9
6.50
.5
23.84
.2
22.98
.0
33.93
.9
22.13
.2
17.43
.7
21.30
.0
74.52
.0
76.89
.6
86.50
.4
84.50
.5
81.91
.8
79.37
.8
136.54
.1
132.66
.4
128.45
.1
.3
.0
.0
0.00 0.000.00
.0
100.20
.4
37.74
.3
36.84
.2
97.50
.5
156.99
.8
153.76
.2
122.93
94.91
.8
65.93
.9
35.98
.0
92.37
.8
149.54
.1
35.13
.2
88.93
.7
145.66
.4
89.89
.6
34.30
.0
105.35
.9
33.91
.2
87.52
.0
141.45
.1
24.74
.3
23.84
.2
22.98
.0
33.93
.9
22.13
.2
17.43
.7
21.30
.0
31.66
.9
20.51
.4
87.20
.4
84.50
.5
81.91
.8
79.37
.8
76.89
.6
74.52
.0
128.45
.1
132.66
.4
136.54
.1
140.76
.2
145.07
.9
149.58
.8
.3
TYPE A
TYPE A
TYPE A
TYPE C
TYPE ATYPE A
TYPE A TYPE A
TYPE A
TYPE C TYPE A
TYPE A
TYPE D
TYPE A
TYPE A
TYPE A TYPE A
TYPE A
TYPE A TYPE A
TYPE B
TYPE A
TYPE A
TYPE B
TYPE A
TYPE C TYPE A
TYPE A
TYPE D
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A TYPE A
TYPE A
TYPE A
TYPE A
TYPE A TYPE A
TYPE A
TYPE A
TYPE A
TYPE ATYPE A TYPE A
TYPE B
TYPE B
TYPE A
TYPE A
TYPE C TYPE A
TYPE A
TYPE D
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A TYPE A
TYPE C
TYPE A TYPE A TYPE A
TYPE A
TYPE C TYPE A
TYPE D
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
UNLESS OTHERWISE SPECIFIED
±X ±X.X ±X.XX ±X/X ±X°
N/A N/A N/A N/A 1°
BREAK ALL SHARP EDGES, MAX: 0.5
DO NOT SCALE DRAWING
DIMENSIONS BASED ON: ASME Y14.5M-2009
MAX MACHINE ALL SURFACES, Ra: 3.2
DRAWING UNITS: MM
THIRD ANGLE PROJECTION
DRAWN K.BOGACZ DATE 04-Jun-2026 CHECKED H K.GUTTI DATE 04-Jun-2026 APPROVED M.ALYARI DATE 04-Jun-2026
USED ON
MATERIAL
ELECTROLYTIC TOUGH PITCH COPPER
GROUP: Particle Physics Mechanical Support CAGE CODE: OU5R6
FERMI NATIONAL ACCELERATOR LABORATORY
UNITED STATES DEPARTMENT OF ENERGY
NAME
CMS HGCAL, COOLING PLATE MACHINING, MASTER
FILE, LAYERS 1-20
SCALE SIZE DRAWING NUMBER SHEET REV
N/A A1 F10261983 16 OF 17 -
REV REVISION CONTROL DOCUMENT DATES SIGNATURES
- F10261983---RCD
DRAWN
APPROVED
DESCRIPTION: CMS HGCAL, COOLING PLATE MACHINING, MASTER FILE, LAYERS 1-20
PROJECT: CMS-HGCAL
A
B
B
C
C
D
D
E
E
F
DRAWN
APPROVED
DESCRIPTION: CMS HGCAL, COOLING PLATE MACHINING, MASTER FILE, LAYERS 1-20
PROJECT: CMS-HGCAL
DETAIL K12R
.0
.0
0.00 0.000.00
.0
162.58
.8
100.20
.4
97.50
.5
158.07
.9
37.74
.3
36.84
.2
35.98
.0
65.93 .9
94.91
.8
153.76
.2
149.54
.1
122.93
.9
92.37
.8
145.66
.4
88.93
.7
35.13
.2
34.30
.0
89.89
.6
105.35
.9
141.45
.1
87.52
.0
33.91
.2
24.74
.3
23.84
.2
87.20
.4
84.50
.5
22.98
.0
81.91
.8
33.93
.9
22.13
.2
17.43
.7
21.30
.0
31.66
.9
20.51
.4
79.37
.8
76.89
.6
74.52
.0
128.45
.1
132.66
.4
136.54
.1
140.76
.2
143.99
.8
.3
CB
TYPE A
TYPE A
TYPE A
TYPE A TYPE A
TYPE A
TYPE B
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE D
TYPE C
TYPE B
TYPE ATYPE A
TYPE A
TYPE A
TYPE A TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE C
TYPE D
TYPE A
TYPE C
TYPE A
TYPE ATYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
TYPE A
UNLESS OTHERWISE SPECIFIED
±X ±X.X ±X.XX ±X/X ±X°
N/A N/A N/A N/A 1°
BREAK ALL SHARP EDGES, MAX: 0.5
DO NOT SCALE DRAWING
DIMENSIONS BASED ON: ASME Y14.5M-2009
MAX MACHINE ALL SURFACES, Ra: 3.2
DRAWING UNITS: MM
THIRD ANGLE PROJECTION
DRAWN K.BOGACZ DATE 04-Jun-2026 CHECKED H K.GUTTI DATE 04-Jun-2026 APPROVED M.ALYARI DATE 04-Jun-2026
USED ON
MATERIAL
ELECTROLYTIC TOUGH PITCH COPPER
GROUP: Particle Physics Mechanical Support CAGE CODE: OU5R6
FERMI NATIONAL ACCELERATOR LABORATORY
UNITED STATES DEPARTMENT OF ENERGY
NAME
CMS HGCAL, COOLING PLATE MACHINING, MASTER
FILE, LAYERS 1-20
SCALE SIZE DRAWING NUMBER SHEET REV
N/A A1 F10261983 17 OF 17 -
REV REVISION CONTROL DOCUMENT DATES SIGNATURES
- F10261983---RCD
DRAWN
APPROVED
DESCRIPTION: CMS HGCAL, COOLING PLATE MACHINING, MASTER FILE, LAYERS 1-20
PROJECT: CMS-HGCAL
A
B
B
C
C
D
D
E
E
F
File details come from the government source that posted it. Updated .