RFP for Drinking Fountain and Faucet Replacement.pdf

Holt Public Schools

Request for Proposal (RFP) Drinking Fountain Replacement Project – Michigan Filter First Compliance

HOLT PUBLIC SCHOOLS

DEPARTMENT OF FACILITIES MANAGEMENT

5780 WEST HOLT ROAD, DOOR #23, HOLT, Mi 48842

REQUEST FOR PROPOSALS (RFP)

Drinking Fountain Replacement Project – Michigan Filter First Compliance Holt Public Schools | RFP Issue Date: May 14, 2025

1. Introduction and Purpose

Holt Public Schools invites qualified vendors to submit proposals for the replacement of existing drinking fountains with filtered drinking water stations in accordance with Michigan’s Filter First legislation (Public Act 197 of 2023). This project covers eight (8) district buildings and aims to ensure safe, accessible, lead-reduced drinking water for all students and staff.

2. Background

Public Act 197 of 2023 mandates all Michigan schools to provide filtered water access points that meet NSF/ANSI certification standards. Holt Public Schools seeks full compliance through certified Elkay water station installations.

3. Scope of Work

The selected vendor will:

• Conduct a district-wide walkthrough and site assessment

• Remove existing units and responsibly dispose of them

• Dumpster provided by contractor

• Supply and install:

o 57 Elkay LZS8WSSP-PF filtered drinking fountains o 50 Elkay Avado KLAV7051 filtered faucets o One Elkay Water Sentry Model 71300C replacement filter per unit

• Handle all necessary plumbing and electrical work

• Ensure ADA and Michigan state compliance

• Provide staff training and documentation for legal compliance

• Provide a complete and functional product.

4. Equipment by Location

School KLAV7051 Faucets LZS8WSSP-PF Fountains

Junior High School 4 9

Sycamore 5 4

Wilcox 5 5

Washington Woods 4 4

Holt High School – Main 12 17

Horizon 6 5

Holt High School – North 4 4

Elliott 3 5

5. Proposal Requirements

Each proposal must include:

• Company overview and K–12 experience

• Confirmation of Elkay models used

• Project timeline and phases

• Itemized pricing and compliance with Act 10 of 2023 (Prevailing Wage)

• Warranty and service plan

• References (3 minimum, preferably from Michigan)

• Proof of insurance and licensing

6. Timeline

• Optional Site Visit: May 21, 2025 at 12:30 PM

• Submission Deadline: June 6, 2025 by 1:00 PM

• Bid Opening: June 6, 2025 at 1:30 PM

• Project Start Date: July 1, 2025

• Completion Target: December 31, 2025

7. Submission Instructions

Send proposals to:

Ryan Zoumbaris, Director of Facilities Holt Public Schools 5780 West Holt Road, Door #23 Holt, MI 48842

Mark envelope:

"Drinking Fountain Replacement Project – Michigan Filter First Compliance" Include contractor name, address, and contact details.

Late Proposals:

All responses must be printed and signed. The bidder assumes the risk of any delay in the mail or in the handling of the mail by employees of Holt Public Schools. Whether sent by regular mail or by means of personal delivery, the bidder assumes responsibility for having its bid deposited on time at the specified location.

Sole Bidder:

In the event that only one bid is received in response to the bid invitation, a detailed cost proposal will be requested of the single bidder. A cost/price analysis and/or audit of the proposal shall be performed by Holt Public Schools to determine if the price is fair and reasonable. Holt Public Schools reserves the right to accept or cancel the bid if only one is received. Holt Public Schools' decision will be final.

Suspended or Debarred Vendor:

Bidder must certify and affirm that it and its principals are not debarred, suspended, proposed for debarment, declared ineligible, or voluntarily excluded by any Federal department or agency from doing business with the Federal Government.

Returned Proposals:

All proposals received after the due date will be unopened and made available to the respective contractors to pick up at its sole cost and expense.

Signed Proposals:

Each proposal must be an original and hard copy, signed by an authorized member of the Contractor's firm. The members should be the highest-ranking officers at local level.

NO ORAL, FAX or E-MAILED proposals will be accepted. Each proposal must be submitted on the Proposal Forms attached to this RFP.

Copies of Proposal: The Contractor shall submit the original proposal and two (2) completed copies of the signed original proposal.

Opening Proposals: At the specified location and due date as stated above under "Submission of Proposal," all properly submitted proposals will be publicly opened and read aloud at 1:30 PM.

All interested parties may attend the proposal opening. No decision will be rendered at the proposal opening.

Email Clarifications: The district intends to communicate with contractors via email (example: clarifications and addendums). Except for the delivery of the proposal itself.

Additional Clarification Request: Prospective contractors may request that the district clarify information contained in this RFP. All such requests must be made by writing via email. The district will attempt to provide a written response to all written Requests for Clarification within five (5) business days after receipt of such request. The district will not respond to any Request for Clarification received after 4:00 PM on May 31, 2025.

Requests for Clarification and inquiries must be made via e-mail.

All Requests for Clarification must be directed to Ryan Zoumbaris, Director of Facilities, at ryan.zoumbaris@hpsk12.net with subject line: " Drinking Fountain Replacement Project – Michigan Filter First Compliance

No response will be made to any oral questions. All questions and answers will be posted on the school district's website. It is each contractor's responsibility to check the website prior to the RFP due date to ensure that it has received all the information including, but not limited to, all addenda to this RFP.

Restrictions on Communication:

From the issue date of this RFP until a contractor is selected and the selection announced, a prospective contractor shall not communicate about the subject of this RFP or any contractor's proposal with the district, its Board of Education, or any individual member, administrator(s), faculty, staff, students, employees, or its mailto:ryan.zoumbaris@hpsk12.net construction manager, if any , except for additional Requests for Clarification in accordance with the paragraphs above, or as otherwise required by applicable law.

RFP/Proposal Information Controlling:

The district intends that all contractors shall have equal access to information relative to this RFP, and that this RFP contains adequate information. No information communicated, either verbally or in writing, to or from a contractor shall be effective unless confirmed by written communication contained in an addendum to this RFP, a Request for Clarification or other written response thereto, or in the proposal.

Reservation of Award:

The contract will be awarded to the responsible bidder whose proposal is within the competitive range and determined to be the most advantageous to Holt Public Schools.

Price, experience, references, and other factors are considered. Holt Public Schools reserves the right to make awards within sixty (60) days after the date of the bid opening during which period bids may not be withdrawn. The Board of Education or its designee reserves the right to reject any or all bids, in part or in total, for any objective or subjective reason whatsoever. Late bids will not be opened.

Collusive Bidding:

The contractor certifies that its proposal is made without any previous understanding, agreement, or connection with any person, firm or corporation making a proposal for the same work and is in all respects fair, without outside control, collusion, fraud, or otherwise illegal action.

Contractor Requirements The contractor shall be responsible for obtaining waste containers for the removal of all its waste materials, rubbish and packing materials resulting from its operations. If the installer fails to clean up within seven (7) days after completion, the owner may do so, and the cost thereof shall be charged to the installer as a deduction in its contract price.

Contractor shall provide an adequate number of qualified, experienced personnel capable of performing the required work within the time frames set forth in the owner’s schedule. All workers and subcontractors performing work shall be skilled in their respective trades.

Bidders shall be reputable, recognized organizations with at least five (5) years of successful experience of work of this type. References of three (3) accounts now being serviced, for which comparable work has been performed, must be furnished. Failure to include references may be ample cause for rejection.

Upon checking in with each building's main office, bidders may view project doors at their own discretion between the weekday hours of 8:00 AM until 3:30 PM. Each bidder shall compare the premises with the specifications and be satisfied with the conditions affecting the services to be provided before submitting their proposal. No allowance or extra consideration on behalf of any bidder will subsequently be allowed by reason or error or oversight on the part of the bidder.

The bidder shall be responsible for all final measurements.

The owner shall conduct a final inspection of the project to assure that all work performed meets specifications.

The contractor must secure all equipment and materials at the site(s). Contractor shall be responsible for any and all damages to existing building(s) or grounds, sustained as a result of work under this contract, caused ty either the installation of its work or in the delivery of materials and equipment for its use. The cost of repairing or replacing such damage shall be borne by the responsible contractor. The repair of replacement work shall be done in a manner as to leave the facilities in the same condition as before the damage occurred to the complete satisfaction of the owner.

The contractor is responsible for all damages and losses until the installation has been completed and accepted by the owner.

Installer shall identify one person, acceptable to the owner, who shall act as liaison with the owner. This individual should have the authority to make decisions on behalf of the installer.

Satisfactory Workmen's Compensation insurance and liabilities and property damage insurance must be maintained and paid for by the contractor at all times work is performed.

Commercial General Liability Insurance is required as follows: on an "occurrence basis" with limits of liability not less than 1,000,000 each occurrence, $3,000,000 aggregate, combined single limit, Personal Injury, Bodily Injury and Property Damage.

Coverage shall include the following extensions: A) Contractual Liability; B) Products and Completed Operations; C) Independent Contractor’s Coverage; D) Broad Form General Liability Extensions or equivalent; E) Deletion of all Explosion, Collapses and Under group (SCU) Exclusions, if applicable.

Professional Liability Insurance (Errors & Omissions): $1,000,000 each occurrence and annual.

Workmen's Compensation including Employer's Liability Coverage: $100,000 each accident, $500,000 annual aggregate, in accordance with all applicable Michigan laws.

GENERAL CONDITIONS

A. It shall be the bidder’s responsibility to read this entire document, review all enclosures and attachments, and comply with all requirements within. Alteration of this document is a crime.

B. For the purpose of assuring Holt Public Schools of the quality of workmanship, materials, equipment, and service, the School Board will retain the right to qualify or disqualify bidders on the basis of available information covering their service and the suitability of the equipment/material bid for the project. All bidders shall provide, upon request, evidence of public liability coverage to include Automobile and Comprehensive General Liability.

C. All alternate equipment/material as specified herein, or suggested by bidder, will be made by a reputable experienced manufacturer and shall conform to the specifications in order to promote efficiency in its use, reduce maintenance cost, and to assure durability for which it is intended.

D. In some cases, where manufacturer names and model numbers are indicated, alternates are not acceptable to create a base bid. However, in most cases alternates are acceptable, but subject to review by the owner. It will be incumbent upon the bidder, when bidding an alternate, to provide proper documentation that the alternates are equal to the manufacturer names and model numbers listed in the base bid.

E. Holt Public Schools reserves the right to accept or reject any or all bids; and to make awards as it considers its best interest, whether low bid or not, this excludes omitting the required affidavits.

F. All proposals submitted shall remain firm for a period of ninety days after date of receiving bids.

G. Payments for materials will be made upon proof that invoiced materials have been delivered to the site, or have been received by the bidder, and are being stored on a site under their control. Big Rapids will not be responsible for damage to items that are stored offsite, contractor shall be fully responsible for all items until each item is completely installed.

H. Final payments will only be made after a final walkthrough is completed with the Director of facilities and other persons they wish to be present.

I. The delivery of the product shall be coordinated with the Owner and delivery terms are flexible. Bids must include all delivery charges, and unboxing costs; disposal of all waste must also be coordinated with owner prior to delivery.

J. In the case where installation is specific; installation must be complete, and all costs must be included. It is also expected that any awarded contractor shall be responsible for cleanup and repairs to damaged elements resultant of work quoted for this project. Net 2 weeks.

K. The successful bidder shall, within a reasonable time after receipt of written notice, make good any defects in material or workmanship that may develop, especially during the warranty period.

L. Holt Public Schools shall not be responsible for any cost incurred by the bidder for the preparation of their bid.

M. Holt Public Schools is a federally constituted government body and as such is not subject to Michigan State or Federal excise taxes.

N. By submitting a bid, vendors acknowledge that their company will be a place where all persons feel welcomed, have a right to be treated equitably and without prejudice, and have a responsibility to treat others the same way. As an equal opportunity employer, vendor does not discriminate on the basis of race, creed, color, national origin, age, sex or physical/mental disability or veteran status in its employment or contracting.

AFFIDAVIT OF COMPLIANCE – IRAN ECONOMIC SANCTIONS ACT

Michigan Public Act No. 517 of 2012

The undersigned, the owner or authorized officer of ___________________________________ (the “Bidder”), pursuant to the compliance certification requirement provided in the Big Rapids School District request for proposal for 2022 (Your Company Name here) (name of Project Goes here) hereby certifies, represents and warrants that the Bidder (including its officers, directors and employees) is not an “Iran Linked Business” within the meaning of the Iran Economic Sanctions Act, Michigan Public Act No. 517 of 2012 (the “Act”), and that in the event Bidder is awarded a Contract as a result of the aforementioned Invitation To Bid, the Bidder will not become an “Iran Linked Business” at any time during the course of performing under the Contract.

The Bidder further acknowledges that any person who is found to have submitted a false certification is responsible for a civil penalty of not more than $250,000.00 or 2 times the amount of the Contract or proposed Contract for which the false certification was made, whichever is greater, the cost of the Intermediate School District’s investigation, and reasonable attorney fees, in addition to the fine. Moreover, any person who submitted a false certification shall be ineligible to bid on an Invitation To Bid for three (3) years from the date it is determined that the person has submitted the false certification.

Contractor:

By: _________________________________

Title: _________________________________

Date:________________________________

STATE OF MICHIGAN )

)ss.

COUNTY OF _______________ )

This instrument was acknowledged before me on the _____ day of ____________, 2022, by

___________________________________, Notary Public

_____________________County, ___________________

My Commission Expires:________________

Acting in the County of:________________

FAMILIAL RELATIONSHIP DISCLOSURE STATEMENT

Important: This disclosure statement must be included with your bid - required by state law (P.A. 232 of 2004)

As required by Public Act 232 of 2004, all bids shall be accompanied by a sworn and notarized statement disclosing any familial relationship that exists between the owner or any employee of the bidder and any member of the School Board or the Superintendent of (Your Company Name here) .

The undersigned, the owner or authorized officer of ___________________________________________________

(the Bidder), pursuant to the familial disclosure requirement provided in the attached invitation to bid, hereby represent and warrant, except as provided below, that no familial relationships exist between the owner(s) or any employee of the company and any member of the School Board or the Superintendent of (Your Company Name here) . If such a relationship exists, please explain:

BIDDER:_____________________________

By:_________________________________

Title:_______________________________

STATE OF MICHIGAN )

COUNTY OF _______________ )

This instrument was acknowledged before me on the _____ day of ____________, 2022, by

Suspended or Debarred Vendor

The undersigned, the owner or authorized officer of __________________________________________ (the “Bidder) hereby certifies and affirms that it and its principals are not debarred, suspended, proposed for debarment, declared ineligible, or voluntarily excluded by any Federal department or agency from doing business with the Federal Government.

Information regarding whether or not a business is suspended or debarred is available at the Federal System for Award Management website www.sam.gov

Bidder Name:________________________________________

Bidder EIN #:_________________________________________

By:_________________________________________________

Authorized Representative Name:________________________

It’s_________________________________________________

Date:_______________________________________________

COUNTY OF _______________ )

This instrument was acknowledged before me on the _____ day of ____________, 2022, by http://www.sam.gov/

Michigan Business Certification & Authorization for Verification

The undersigned, the owner or authorized officer of __________________________________(the “Bidder) hereby certifies that it has submitted a bid or proposal to the Holt Public School District. District and that the Bidder is a “Michigan Business” as defined in MCL 18.1268(1) and (2). The Bidder certifies that it has within the 12 months immediately preceding the bid/proposal deadline or for the period that the business has been in existence, if the business is a newly established within the 12 months immediately preceding the bid deadline:

1. Filed a Michigan single business tax return or Michigan business tax return showing a portion or all of the income taxed based allocated or apportioned to the state of Michigan pursuant to the former single business tax act, 1975 PA 228 or the Michigan business tax act, 2007 PA 36, MCL 208.11101 to 208.1601.

2. Filed a Michigan income tax return showing income generated in or attributed to the state of Michigan.

3. Withheld Michigan income tax from compensation paid to the bidder’s owners and remitted the tax to the department of treasury.

The Bidder further certifies that its filling or withholding satisfying the above criteria was more than a nominal filing for the purpose of gaining the status of a Michigan business, but shall indicate a significant business presence in the state, considering the size of the business and nature of its activities.

The Bidder hereby authorizes the Michigan Department of Treasury to verify that the Bidder has or has not satisfied at least one of the above enumerated criteria. This authorization shall permit the Michigan Department of Treasury to disclose the verifying information to the Holt Public School District in accordance with the procedures established by Section 28 of 1941 PA 122, MCL 205.28 and Section 623a of 1976 PA 451. MCL 380.623.A

Bidder Name:________________________________________

Bidder EIN #:_________________________________________

By:_________________________________________________

Authorized Representative Name:________________________

It’s_________________________________________________

Date:_______________________________________________

COUNTY OF _______________ )

This instrument was acknowledged before me on the _____ day of __________, 202 , by

Itemized Pricing Sheet

Description Quantity Unit Price Total Price

Elkay LZS8WSSP-PF Drinking Fountain 57 $ $

Elkay Avado KLAV7051 Faucet 50 $ $

Elkay 71300C Replacement Filters 107 $ $

Elkay Accessories Parts

Labor – Installation & Disposal Lump Sum $ $

Electrical Connections (where needed) Lump Sum $ $

Site Walkthrough & Assessment Lump Sum $ $

Training & Documentation Support Lump Sum $ $

Cover Plates (if required for removed units) Estimated [#]

Mobilization & Storage of Materials $ $

Prevailing Wage – Journeymen Plumber $ $

Prevailing Wage – Apprentice Plumber $ $

Prevailing Wage -Electrician $ $

Prevailing Wage – Fringe Benefit Costs $ $

Performance Bond & Bid Bond Cost $ $

Total Proposed Cost $

All pricing includes prevailing wage, certified payroll, and compliance with MCL Act 10 of 2023.

Project Name: Holt Schools Drinking Fountain Replacement Project

Signature by: ___________________________________________________Date: ______________

Printed Name: _______________________________________________Title: __________________

Contractor: ________________________________________________________________________

Address: ___________________________________________________________________________

City: _____________________________________State: _______________Zip: __________________

SPECIFICATIONS

Enhanced Bottle Filler & Single ADA Cooler Refrigerated Stainless PFOA/PFOS + Lead Drop Down Wrapper

Model LZS8WSSP-PF

In keeping with our policy of continuing product improvement, Elkay reserves the right to change product specifications without notice. Please visit elkay.com for the most current version of Elkay product specification sheets. This specification describes an Elkay product with design, quality, and functional benefits to the user.

When making a comparison of other producers’ offerings, be certain these features are not overlooked.

Elkay REV 02252025 1-800-260-6640 | SVtechservice@Elkay.com © 2025 Page 1 LZS8WSSP-PF Patent zurn-elkay.com/patents LZS8WSSP-PF_spec.pdf

PRODUCT SPECIFICATIONS

Enhanced Bottle Filler & Single ADA Cooler Refrigerated Stainless PFOA/PFOS + Lead Drop Down Wrapper. Chilling Capacity of 8.0 GPH (gallons per hour) of 50 F drinking water, based on 80 F inlet water and 90 F ambient, per ASHRAE 18 testing. Features shall include Antimicrobial*, Automatic Filter Status Reset, Energy Savings, Filtered, Green Ticker™, Hands Free, Laminar Flow, Real Drain, Visual Filter Monitor, Quick Filter Change. Furnished with Flexi-Guard ® Safety Bubbler. Electronic Bottle Filler Sensor with Electronic Front and Side Bubbler Pushbar activation. Product shall be Wall Mount (On Wall), for Indoor applications, serving 1 station(s). Unit shall be certified to UL 399 and CAN/CSA C22.2 No. 120.

Special Features: Antimicrobial, Automatic Filter Status Reset, Energy Savings, Filtered, Green Ticker™, Hands Free, Laminar Flow, Real Drain, Visual Filter Monitor, Quick Filter Change

Finish: Stainless Steel (S) Power: 115V/60Hz Bubbler Style: Flexi-Guard ® Safety Bubbler Activation by: Electronic Bottle Filler Sensor with

Electronic Front and Side Bubbler Pushbar

Mounting Type: Wall Mount (On Wall) Chilling Capacity*: 8.0 GPH Full Load Amps 5 Rated Watts: 370 Dimensions (L x W x H): 18-3/8" x 19" x 39-7/16" Approx. Shipping Weight: 85 lbs.

Installation Location: Indoor No. of Stations Served: 1 *Based on 80° F inlet water & 90° F ambient air temp for 50° F chilled drinking water.

Special Note: One-Box Packaging.

• Visual Filter Monitor: LED filter status indicator alerts to needed filter changes.

• PFOA/PFOS Filter Included: Filter is tested and certified to NSF/ANSI 42, 53 and 401 for the reduction of PFOA and PFOS (two prevalent PFAS chemicals), lead, microplastics, Class 1 particulate, cysts, and chlorine taste and odor. 2,250 gallon capacity or 1 year after installation.

• Energy-savings mode reduces energy consumption.

• Faster Filter Changes: Quick filter change wrapper provides easy access to filter from the front and side of cooler for efficient filter changes in under a minute.

• LED lighting: Low-energy LED light encourages use, assists with

Additional Finishes: Arctic White (A)

Midnight Black (M)

Included with Product: Bottle Filler, Water Cooler, Filter

Ships in one box.

A Century of Tradition and Quality.

For more than 100 years, Elkay has been making innovative products and providing exceptional customer care. We take pride in offering plumbing products that make life easier, inspire change and leave the world a better place.

PRODUCT COMPLIANCE

ADA & ICC A117.1

ASME A112.19.3/CSA B45.4

CAN/CSA C22.2 No. 120

FCC & ISED

GreenSpec® NSF/ANSI 42, 53, 61 (Q≤1), 372 (lead free), & 401

UL 399

Complies with ADA & ICC A117.1 accessibility requirements when installed according to the requirements outlined in these standards. Installation may require additional components and/or construction features to be fully compliant. Consult the local Authority Having Jurisdiction if necessary.

Installation Instructions (PDF) - 2000001214

5 Year Limited Warranty on the refrigeration system of the unit.

Electrical components and water system are warranted for 12 months from date of installation. Warranty pertains to drinking water applications only. Non-drinking water applications are not covered under warranty.

Warranty (PDF)

PART:________________________________QTY: _____________

PROJECT:______________________________________________

CONTACT:______________________________________________

DATE:__________________________________________________

NOTES:_________________________________________________

APPROVAL:_____________________________________________

mailto:SVtechservice@Elkay.com http://www.elkay.com/products/details/lzs8wssp-pf http://www.elkay.com/products/details/lzs8wssp-pf https://www.zurn.com/patents http://www.elkayfiles.com/care-cleaning-install-warranty-sheets/2000001214.pdf http://www.elkayfiles.com/care-cleaning-install-warranty-sheets/96993c.pdf

In keeping with our policy of continuing product improvement, Elkay reserves the right to change product specifications without notice. Please visit elkay.com for the most current version of Elkay product specification sheets. This specification describes an Elkay product with design, quality, and functional benefits to the user.

When making a comparison of other producers’ offerings, be certain these features are not overlooked.

Elkay REV 02252025 1-800-260-6640 | SVtechservice@Elkay.com © 2025 Page 2 LZS8WSSP-PF Patent zurn-elkay.com/patents LZS8WSSP-PF_spec.pdf filling dark bottles and illuminates in dark hallways.

• Fill rate is 1.1 GPM: Laminar flow provides clean fill with minimal splash. Real drain system eliminates standing water in basin.

*Antimicrobial claims are in refence to components manufactured antimicrobial agents, helping to provide clean, stain- and odor-free surfaces.

COOLING SYSTEM

• Compressor: Hermetically-sealed, reciprocating type, single phase. Sealed-in lifetime lubrication.

• Condenser: Fan cooled, copper tube with aluminum fins. Fan motor is permanently lubricated.

• Cooling Unit: Combination tube-tank type. Continuous copper tubing with is fully insulated with EPS foam that meets UL requirements for self-extinguishing material.

• Refrigerant Control: Refrigerant R-134a is controlled by accurately calibrated capillary tube.

• Temperature Control: Easily accessible enclosed adjustable thermostat is factory preset. Requires no adjustment other than for altitude requirements.

Optional Accessories

71300C WaterSentry® PFOA/PFOS (PFAS) + Lead + Microplastics NSF/ANSI Certified 2250 Gal 12

Month Filter

Spec Sheet (PDF)

LKAPREZL

Cane Apron for EZ Gray

MLP100

In-wall Carrier for Single-station On-wall Bottle Fillers Coolers & Fountains

1000004833 Universal Stainless Steel Back Panel for Single EZ, EMAB and VRC Bottle Filling Station mailto:SVtechservice@Elkay.com http://www.elkay.com/products/details/lzs8wssp-pf http://www.elkay.com/products/details/lzs8wssp-pf https://www.zurn.com/patents http://www.elkay.com/products/details/71300c http://www.elkay.com/products/details/71300c http://www.elkayfiles.com/spec-sheets/71300c_spec.pdf http://www.elkayfiles.com/spec-sheets/71300c_spec.pdf http://www.elkay.com/products/details/lkaprezl http://www.elkay.com/products/details/lkaprezl http://www.elkayfiles.com/spec-sheets/lkaprezl_spec.pdf http://www.elkayfiles.com/spec-sheets/lkaprezl_spec.pdf http://www.elkay.com/products/details/mlp100 http://www.elkay.com/products/details/mlp100 http://www.elkayfiles.com/spec-sheets/mlp100_spec.pdf http://www.elkayfiles.com/spec-sheets/mlp100_spec.pdf http://www.elkay.com/products/details/1000004833 http://www.elkay.com/products/details/1000004833 http://www.elkayfiles.com/spec-sheets/1000004833_spec.pdf http://www.elkayfiles.com/spec-sheets/1000004833_spec.pdf

In keeping with our policy of continuing product improvement, Elkay reserves the right to change product specifications without notice. Please visit elkay.com for the most current version of Elkay product specification sheets. This specification describes an Elkay product with design, quality, and functional benefits to the user.

When making a comparison of other producers’ offerings, be certain these features are not overlooked.

Elkay REV 02252025 1-800-260-6640 | SVtechservice@Elkay.com © 2025 Page 3 LZS8WSSP-PF Patent zurn-elkay.com/patents LZS8WSSP-PF_spec.pdf mailto:SVtechservice@Elkay.com https://www.zurn.com/patents

Avado® Single Hole 2-in-1 Kitchen Faucet with Filtered Drinking Water

Model(s) LKAV7051F

In keeping with our policy of continuing product improvement, Elkay reserves the right to change product specifications without notice. Please visit elkay.com for the most current version of Elkay product specification sheets. This specification describes an Elkay product with design, quality, and functional benefits to the user. When making a comparison of other producers’ offerings, be certain these features are not overlooked.

Elkay REV 12052024 1-800-476-4106 | CustCare@Elkay.com © 2024 Page 1 LKAV7051F Patent zurn-elkay.com/patents LKAV7051F_spec.pdf

PRODUCT SPECIFICATIONS

Avado® Single Hole 2-in-1 Kitchen Faucet with Filtered Drinking Water. Faucet has a flow rate of 1.5 GPM, and is made of Brass material, with a Ceramic Disc valve. Faucet requires 1 faucet holes.

Mounting Type: Deck Mount Spray Type: Pull Down Finish: Chrome (CR), Lustrous Steel (LS), Matte Black (MB) Handle Type: Lever Handle Deck Clearance: 9-13/16" Spout Reach: 8-3/4" Spout Height: 17-1/8" Hole Drillings: 1 Material: Brass Valve Type: Ceramic Disc Valve Connection: 1/2"-14 NPSM Flow Rate: 1.5 GPM Faucet Hole Size (min): 1-3/8" Countertop Thickness: 2-1/2 Spout Type: Pull-down Spray Spray Functions: Aerated

Faucet Part Number Finish 2000000331 Chrome 2000000332 Lustrous Steel 2000000346 Matte Black

Included with Product: Faucet with Filter 71300C and Deck

Plate / Escutcheon LK134 A Century of Tradition and Quality.

For more than 100 years, Elkay has been making innovative products and providing exceptional customer care. We take pride in offering plumbing products that make life easier, inspire change and leave the world a better place.

Product Compliance: ADA & ICC A117.1

ASME A112.18.1/CSA B125.1

CEC

NSF 61 (Q≤1)

NSF 372 (lead free)

Accessory: NSF 42

NSF 53

NSF 401

Complies with ADA & ICC A117.1 accessibility requirements when installed according to the requirements outlined in these standards.

Clean and Care Manual (PDF) Installation Instructions (PDF) - 2000000348 Warranty (PDF)

PART:________________________________QTY: _____________

PROJECT:______________________________________________

CONTACT:______________________________________________

DATE:__________________________________________________

NOTES:_________________________________________________

APPROVAL:_____________________________________________

mailto:CustCare@Elkay.com http://www.elkay.com/products/details/lkav7051f http://www.elkay.com/products/details/lkav7051f https://www.zurn.com/patents http://www.elkayfiles.com/care-cleaning-install-warranty-sheets/1000005365.pdf http://www.elkayfiles.com/care-cleaning-install-warranty-sheets/2000000348.pdf http://www.elkayfiles.com/care-cleaning-install-warranty-sheets/1000005132.pdf

In keeping with our policy of continuing product improvement, Elkay reserves the right to change product specifications without notice. Please visit elkay.com for the most current version of Elkay product specification sheets. This specification describes an Elkay product with design, quality, and functional benefits to the user. When making a comparison of other producers’ offerings, be certain these features are not overlooked.

Elkay REV 12052024 1-800-476-4106 | CustCare@Elkay.com © 2024 Page 2 LKAV7051F Patent zurn-elkay.com/patents LKAV7051F_spec.pdf

Included Accessories

WaterSentry® PFOA/PFOS (PFAS) + Lead + Microplastics NSF/ANSI Certified 2250 Gal 12 Month

Filter

Optional Accessories

WaterSentry® PFOA/PFOS (PFAS) + Lead + Microplastics NSF/ANSI Certified 2250 Gal 12 Month

Filter mailto:CustCare@Elkay.com http://www.elkay.com/products/details/lkav7051f http://www.elkay.com/products/details/lkav7051f https://www.zurn.com/patents http://www.elkay.com/products/details/71300c http://www.elkay.com/products/details/71300c http://www.elkayfiles.com/spec-sheets/71300c_spec.pdf http://www.elkayfiles.com/spec-sheets/71300c_spec.pdf http://www.elkay.com/products/details/71300c http://www.elkay.com/products/details/71300c http://www.elkayfiles.com/spec-sheets/71300c_spec.pdf http://www.elkayfiles.com/spec-sheets/71300c_spec.pdf

In keeping with our policy of continuing product improvement, Elkay reserves the right to change product specifications without notice. Please visit elkay.com for the most current version of Elkay product specification sheets. This specification describes an Elkay product with design, quality, and functional benefits to the user. When making a comparison of other producers’ offerings, be certain these features are not overlooked.

Elkay REV 12052024 1-800-476-4106 | CustCare@Elkay.com © 2024 Page 3 LKAV7051F Patent zurn-elkay.com/patents LKAV7051F_spec.pdf mailto:CustCare@Elkay.com https://www.zurn.com/patents

WaterSentry® PFOA/PFOS (PFAS) + Lead + Microplastics NSF/ANSI Certified 2250 Gal 12 Month Filter

Model(s) 71300C

In keeping with our policy of continuing product improvement, Elkay reserves the right to change product specifications without notice. Please visit elkay.com for the most current version of Elkay product specification sheets. This specification describes an Elkay product with design, quality, and functional benefits to the user. When making a comparison of other producers’ offerings, be certain these features are not overlooked.

Elkay REV 02272025 1-800-260-6640 | SVtechservice@Elkay.com © 2025 Page 1 71300C Patent zurn-elkay.com/patents 71300C_spec.pdf

PRODUCT SPECIFICATIONS

WaterSentry® PFOA/PFOS (PFAS) + Lead + Microplastics NSF/ANSI Certified 2250 Gal 12 Month Filter. Overall dimensions are 3-5/16" x 3-5/16" x 11-5/8".

Special Features: Filtered Dimensions: 3-5/16" x 3-5/16" x 11-5/8" Shipping Weight: 2 lbs.

Flow Rate: 1.1 GPM (4.2 L/m) Capacity: 2250 gal. (8517 L) Temperature: 40-100°F (4-38°C) Initial Pressure Drop: 2-5 PSI (14-34 kPa) Maximum Pressure: 105 PSI (724 kPa) Minimum Pressure: 20 PSI (138 kPa) Water Inlet: 3/8” (9.5mm) O.D. tube Water Outlet: 1/4” (6.4mm) O.D. tube Special Note: Replacement filter for use in Enhanced ezH2O Bottle Filling Stations.

Replacement filter for Elkay enhanced ezH20 bottle filling stations and faucets

Filter is tested and certified to NSF/ANSI 42, 53 and 401 for the reduction of PFOA and PFOS (two prevalent PFAS chemicals), lead, microplastics, Class 1 particulate, cysts, and chlorine taste and odor

Filter should be replaced every 2,250 gallons or 1 year after installation

Equipped with quick-disconnect, 1/4-turn installation, as well as automatic inlet shut-off valve that closes when filter is removed

Provides filtration at the point of use where needed Pairs with EWF3001 universal filtration kit to upgrade any beverage system or faucet to filtered

Included with Product: 2250 gallon replacement filter cartridge A Century of Tradition and Quality.

For more than 100 years, Elkay has been making innovative products and providing exceptional customer care. We take pride in offering plumbing products that make life easier, inspire change and leave the world a better place.

Product Compliance: NSF 42

NSF 53

NSF 372 (lead free)

NSF 401

PART:________________________________QTY: _____________

PROJECT:______________________________________________

CONTACT:______________________________________________

DATE:__________________________________________________

NOTES:_________________________________________________

APPROVAL:_____________________________________________

mailto:SVtechservice@Elkay.com http://www.elkay.com/products/details/71300c http://www.elkay.com/products/details/71300c https://www.zurn.com/patents

Text1: