RFP_Boiler Pumps.pdf

REQUEST FOR PROPOSAL (RFP)

2019 BOILER PUMP

REPLACEMENTS

Tawas Area School District March 4, 2019

Questions/Communications to:

R.C. Hendrick & Son, Inc.

Daniel J La Pan, AIA 2885 S. Graham Rd.

Saginaw, MI 48609

P: 989.781.8166

TAWAS AREA SCHOOL DISTRICT

Advertisement for Request for Proposals

Boiler Pump Replacements

Proposals for the Tawas Area School District Boiler Pump Replacement Project will be received by the Tawas Area School District at the Office of the Superintendent, 255 West M-55, Tawas City, MI 48763 until Tuesday, March 26, 2019 at 3:30 PM. Any proposal received after the designated closing time will be returned unopened.

The purpose of this Request for Proposals is to seek service of a qualified professional plumbing contractor to provide replacement pump services to the Tawas Area School District for the Boiler Circulating Pump Replacement Project.

A pre-bid meeting is not planned although it is recommended that the site be visited to verify site limitations and exact location of the project.

An original and one (1) copy of the proposal shall be submitted in a sealed envelope addressed to Mr. Jeffrey Hutchison, Superintendent and marked Tawas Area School Boiler Pump Replacement Project. Proposers desiring information for use in preparing proposals may obtain a set of documents from RC Hendrick & Son’s Plan Room @ www.rchendrick.com. Click on the Plan Room Tab and scroll down to the Tawas Area School District project.

The School District reserves the right to accept or reject any and all proposals and to waive any technicalities or irregularities therein. The district further reserves the right to award the contract to that proposer whose proposal best complies with the project requirements. Proposers may not withdraw their proposal for a period of ninety (90) days for the date set for the opening thereof.

Jeffrey Hutchison Superintendent

Dated: 4 March 2019

1. INTRODUCTION

1.1 PURPOSE AND GENERAL INFORAMATION

Tawas Area School District is requesting responses to this Request for Proposal (RFP) to enter into a contract with a mechanical contractor to replace two existing boiler room pumps with larger capacity pumps.

A copy of this RFP can be obtained from Daniel La Pan, AIA at dan@rchendrick.com the school districts representative on this project. It is incumbent upon Respondents to check the website www.rchendrick.com for additional information and/or addendums. If you have any questions, please contact Daniel La Pan as it relates to your concerns. Questions regarding the substance of the RFP or scope of services must be submitted via e-mail to Daniel La Pan. Oral comments are not official responses.

Responses are due prior to the deadline indicated and must be delivered or mailed to Tawas Area School District, 255 West M-55, Tawas City, MI 48763. Late responses will not be accepted – NO EXCEPTIONS.

1.2 DEFINITIONS

In this RFP the following definitions shall apply:

“District” means Au Gres Sims School District;

“District Representative” has the meaning set out in section 1.5;

“Website” means www.rchendrick.com

“Closing Time” has the meaning set out in section 1.3;

“Contract” means a formal written contract between the District and a Preferred Proponent to undertake the Services, the preferred contract form of which is AIA Document A132-2009.

“Preferred Proponent” means the Proponent selected by the District to enter into negotiations for a Contract;

“Proponent” means an entity that submits a Proposal;

“RFP” means this Request for Proposals;

“Services” has the meaning of any and all construction and administration work necessary to complete this project;

“Site” means the place where the Services are to be performed.

1.3 PROPOSAL SCHEDULE

Closing Time and Address for Proposal Delivery

Proposal must be received by the office of:

Office of the Superintendent

255 West M-55.

Tawas City, MI 48763

Proposal Closing Date and Time: Tuesday, March 26, 2019 at 3:30 PM (Local Time).

Submissions by email will be accepted.

LATE PROPOSALS

Proposals received after the Closing Time will not be accepted or considered. Delays caused by and delivery, courier or mail service(s) will not be grounds for an extension of the closing time.

1.4 INFORMATION MEETING

A pre-bid meeting is not planned although it is recommended that the site be visited to verify site limitations and exact location of the project.

1.5 AMMENDMENTS TO PROPOSALS

Proposals may be revised by written amendment, delivered to the location set out above, at any time before the closing time but not after. An amendment must be signed by an authorized signatory of the Proponent in the same manner as provided in the original proposals.

All inquiries related to this RFP shall be directed in writing, via e-mail to the person named below (the ‘District Representative”). Information obtained from any person or source other than the District Representative may not be relied upon.

District Representative:

Mr. Daniel La Pan, AIA Phone: 989.781.8116 E-mail: dan@rchendrick.com

Inquiries should be made no later than 3 days before Closing Time. The District reserves the right not to respond to inquiries made within 3 days of Closing Time. Inquiries and responses will be recorded and posted on the Website. It is the responsibility of the Proponent to check the Website for Addendums prior to submitting their proposal.

Proponents finding discrepancies or omission in the Contract or FRP or having doubts as to the meaning or intent of any provision should immediately notify the District Representative. If the District determines that an amendment is required to this RFP, the District Representative will issue an addendum in accordance with section 1.6. No oral conversation will affect or modify the terms of this RFP or may be relied upon by any Proponent.

1.6 ADDENDA

If the District determines that an amendment is required to this RFP, the District Representative will post a written addendum on the Website at www.rchendrick.com and upon posting will be deemed to form a part of this RFP. No Amendment of any kind to the RFP is effective unless it is posted in a formal written addendum on the Website. Upon submitting a Proposal, Proponents will be deemed to have received notice of all addenda that are posted on the Website.

1.7 EXAMINATION OF CONTRACT DOCUMENTS AND SITE

Proponents will be deemed to have carefully examined the RFP, including any attached schedules, the Contract and the Site (as applicable) prior to preparing and submitting a Proposal with respect to any and all facts which may influence a Proposal.

1.8 STATUS INQUIRIES

All inquiries related to the status of this RFP, including whether or not a Contract has been awarded, should be directed to the District Representative.

2. PROPOSAL SUBMISSION FORM AND CONTENTS

2.1 PACKAGE

Proposals shall be in a sealed package, marked on the outside with the Proponent’s name and title of the Project.

2.2 FORM OF PROPOSAL

Proponents are to complete the form of Proposal attached as Schedule A.

2.3 SIGNATURE

The legal name of the person or firm submitting the Proposal should be inserted in Schedule A. The Proposal should be signed by a person authorized to sign on behalf of the Proponent and include the following:

A. If the Proponent is a corporation then the full name of the corporation should be included, together with the names of authorized signatories. The Proposal should be executed by all of the authorized signatories or by one or more of them provided that a copy of the corporate resolution authorizing those persons to execute the Proposal on behalf of the corporation is submitted;

B. If the Proponent is a partnership or joint venture then the name of the partnership or joint venture and the name of each partner or joint venturer should be included and each partner or joint venturer should sign personally (or, if one or more person(s) have signing authority for the partnership or joint venture, the partnership or joint venture should provide evidence to the satisfaction of the District that the person(s) signing have signing authority for the partnership or joint venture). If a partner or joint venture is a corporation then such corporation should sign as indicated in subsection (A) above; or;

C. If the Proponent is an individual, including a sole proprietorship, the name of the individual should be included.

2.4 ADDITIONAL INFORMATION

The District may, at its discretion, request clarifications or additional information form a Proponent with respect to any Proposal, and may make such requests to only selected Proponents. The District may consider such clarifications or additional information in evaluating a Proposal.

2.5 NEGOTIATION OF CONTRACT AND AWARD

If the District selects a Preferred Proponent or Proponents, then it may:

A. Enter into a Contract with the Preferred Proponent(s); or

B. Enter into discussions with the Preferred Proponent(s) to clarify any outstanding issues and attempt to finalize the terms of the Contract(s), including financial terms.

If discussions are successful, the District and the Preferred Proponent(s) will finalize the Contract(s); or

C. If at any time the District reasonably forms the opinion that a mutually acceptable agreement is not likely to be reached within a reasonable time, give the preferred Proponent(s) written notice to terminate discussions, in which event the District may then either open discussions with another Proponent or terminate this RFP and retain or obtain the Services in some other manner.

The District is under no obligation to accept any Proposal submitted. The District reserves the right in its sole discretion to waive informalities in, or reject any or all Proposals, or to accept any Proposal deemed most favorable in the interest of the District, or cancel the competition at any time without award. Thereafter, the District may issue a new Invitation/Request, sole source or do nothing.

All costs incurred in the preparation and presentation of the proposal shall be wholly absorbed by the contractor. All supporting documentation and manuals submitted with this proposal will become the property of the Hale Area Schools unless otherwise requested by the contractor at the time of submission.

3. GENERAL CONDITIONS

3.1 NO DISTRICT OBLIGATION

This RFP is not a tender and does not commit the District in any way to select a Preferred Proponent, or to proceed to negotiations for a Contract, or to award any Contract, and the District reserves the complete right to at any time reject all Proposals, and to terminate this RFP process.

3.2 NO CONTRACT

By submitting a Proposal and participation in the process as outlined in this RFP, Proponents expressly agree that no contract of any kind is formed under, or arises from, this RFP prior to the signing of a formal written Contract.

3.3 CONFLICT OF INTEREST

Proponents shall disclose any potential conflicts of interest and existing business relationships that they may have with the District. If requested by the District, Proponents should provide all pertinent information regarding ownership of there company within forty-eight (48) hours of the District’s request.

3.4 SOLICITATION OF DISTRICT BOARD MEMBERS

Proponents and their agents will not contact any Board Member of the District or staff with respect to this RFP at any time prior to the award of a contract or the termination of the is RFP, and the District may reject the proposal of any Proponent that makes any such contact.

3.5 CONFIDENTIALITY

All submissions become the property of the District and will not be returned to the Proponent. The District will hold all submissions in confidence unless otherwise required by law.

4. SCOPE OF SERVICES

4.1 Services will include the removal of two (2) existing Bell & Gossett Model 2.5 BB pumps and replacing them with two (2) new Bell & Gossett Model 4 EB pumps. Installation shall include necessary piping revisions providing the enlargement of the suction and discharge headers. This pump replacement will allow for one pump to carry the load of the building and the other to become the backup as necessary.

Work to include:

● Replacement of the triple duty valves

● Replacement of pump suction diffusers

● Replacement of suction and discharge stainless steel flex connectors

● Replacement of suction and discharge isolation valves

● Replacement of both pump gauge kits

● Necessary Piping Insulation

● Necessary Electrical Revisions – Fuse, conduit, wire and motor starter replacement with Variable Speed Drives

4.2 Contractors will be responsible for any and all damage due to construction. Any damage caused by the contractor must be repaired within ten (10) working days at the expense of the contractor. If damage occurs, the contractor will be liable for such damages.

4.3 It is expressly agreed and understood that the Contractor is, in all respects, an independent contractor as to work; however, in certain aspects, the Contractor is bound to follow the directions of the District Superintendent or appointed designee at the time of repair and/or construction, and that the Contractor is in no respect an agent, servant or employee of the District.

4.4 The Contractor’s timeliness and delivery of quality products shall be monitored by the

District Superintendent or appointed designee. If at any time the Contractor is performing less than satisfactory work, the Contractor, upon notification by the District Superintendent or appointed designee, shall do whatever is necessary to perform the work properly at no additional cost to the District. Failure to give such notification shall not relieve the Contractor of his obligation to perform the work at the time and in the manner specified.

5. INSURANCE REQUIREMENTS

5.1 The selected service provider shall agree to indemnify and hold harmless the District and its officers, agents, and employees for any and all claims, causes, or actions, and damages of every kind, for injury to or death of any person and damages to property arising out of or in connection with the work done by the Contractor under this contract, and including acts of omissions of the District or its officers, agents, or employees in connection with said contract.

5.2 The District will require proof of professional liability insurance with errors and omissions coverage, workers compensation insurance, general liability and automobile insurance with companies authorized to do business in Michigan, and in amounts meeting or exceeding the amounts listed in Attachment B.

5.3 The successful Contractor, within ten (10) days after the contract award, shall furnish the

District with proof of insurance as stated in Attachment B.

5.4 The District and RC Hendrick shall be named as additional insured on all policies as directed in Attachment B. Should any insurance required by this contract lapse, the Contractor shall immediately cease any operations until authorized in writing by the District. If the lapse period extends fifteen (15) days, the contract shall automatically terminate and the Contractor shall be in breach of this contract.

6. AGREEMENT/EXCEPTIONS

6.1 Submission of a proposal indicates the Contractor agrees to the terms, conditions and other provisions contained in the RFP, unless the Contractor clearly and specifically presents in its proposal any exceptions to the terms, conditions, and other provisions contained in the

RFP.

6.2 Exceptions presented in a proposal are not to be considered incorporated into the contract between the District and the selected Contractor unless and until the District agrees to accept such exceptions.

6.3 The selected Contractor must acknowledge and agree that the contract resulting from this

RFP include the terms, conditions, and other provisions contained in the RFP, the proposal selected (including any exceptions accepted by the District) which is acceptable to the District and is not in conflict or contravention of the RFP, and any other documents mutually agreed upon by the District and selected Contractor.

6.4 No oral statements or any person shall modify or otherwise change or affect the terms, conditions, or specifications stated in the RFP or the resulting contract.

6.5 A formal contract will be negotiated after the selection of a contractor for the services identified in the scope of services by the District.

6.6 The contractor shall not assign the contract or any part thereof to any other person unless such assignment is first approved in writing by the District, it being understood that the contract shall not be assignable unless the proposed assignee is acceptable to the District.

The request for assignment must include evidence that the proposed assignee qualifies under all requirements of the contract and must be addressed as defined in the contract for services.

7. PROPOSAL SUBMITTAL

One original plus one (copy) of the entire bid package must be submitted to the District as follows:

Boiler Pump Replacement Project Tawas Area School District Office of the Superintendent 255 West M-55 Tawas City, MI 48763

All proposals must be received prior to, Tuesday, March 26, 2019 at 3:30 PM. Proposals may be mailed or dropped off at the Office of the Superintendent. Proposals must be received in the Superintendents Office for it to be considered in the RFP process.

SCHEDULE A

2019 BOILER PUMP REPLACEMENT PROJECT

BID FORM

TO: Mr. Jeffrey Hutchison, Superintendent Tawas Area School District Tawas City, MI 48763

Having carefully reviewed the bidding documents described in the RFP and understanding the scope of work involved in the proposed Bid and those that interface with it, we hereby propose to furnish labor, materials, tools, equipment, supervision, insurance and services required for the completion of all work required for the Bid indicated in accordance with the RFP.

BASE BID, BOILER PUMP REPLACEMENT:

BIDDERS NAME:

ADDENDA:

And having Received and Examined the Following Addenda: (include date for acknowledgement)

Addendum Number______________, dated__________________________, 2019

Addendum Number______________, dated__________________________, 2019

SUBSTITUTIONS:

Bidder is cautioned to bid on the “Standards” specified. The following substitutions for the “Standards” specified are listed herein for consideration, and if accepted, the contract sum may be adjusted in accordance with the following:

______________________________________________Add / Deduct $___________________

______________________________________________Add / Deduct $___________________

CONTRACT:

The undersigned agrees that the above Base Bid Prices shall hold for 90 days and Alternate Prices for 120 days after receipt of proposals, to accept provisions of “Instructions to Bidders”

IRAN BUSINESS RELATIONSHIP AFFIDAVIT:

Pursuant to the Michigan Iran Economic Sanctions Act, 2012 P.A. 517, by submitting a bid, proposal or response, Respondent certifies, under civil penalty for false certification, that it is fully eligible to do so under law and that it is not an “Iran Linked Business,” as that term is defined in the Act.

SUBMITTED BY:

Firm Name:

Address:

Email Address:

Signed:

Typed Name:

Date: Title:

Phone: Fax:

If bidder is a Corporation, indicate State of Incorporation:

If a Partnership, give full names of all Partners:

Please submit (1) one original copy and (1) one copy of this proposal. Contractor should retain (1) one copy for your records.

FAMILIAL DISCLOSURE STATEMENT

All bidders must complete the following familial disclosure from in compliance with MCL 380.1267 (Public Act 232 of 2004) and attach this information to the bid.

By the attached sworn and notarized statement we are disclosing the following familial relationship(s) that exist between the owner or any employee of the bidder and any member of the board, intermediate school board, or board of directors or the superintendent of the school district, intermediate superintendent of the intermediate school district, or chief executive officer of the public school academy.

The Owner shall not accept a bid that does not include this sworn and notarized disclosure statement.

Disclose any familial relationship and complete the form below in its entirety:

The following are familial relationships as described above (provide employee name, family contact name, family contact position, and familial relationship or NONE.)

Signature(s): Title: Name of Firm:

STATE OF MICHIGAN

SS COUNTY OF

On this day of ____________, 20____, before me a Notary Public in and for , Said county, personally appeared agent of the said firm

And acknowledged the same to be his free act and deed as such agent.

Notary Public

SCHEDULE B

INSURANCE REQUIREMENTS

WORKER’S COMPENSATION AND EMPLOYER’S LIABILITY INSURANCE:

Worker’s Compensation: State of Michigan Statutory Limits

Employer’s Liability: $500,000 – each accident $500,000 – disease (each employee) $500,000 – disease (policy limit)

The limits for Commercial General Liability insurance including -coverage for Premises-Operations, Independent Contractors’ Protective, Products-Completed Operations, Contractual Liability, Personal Injury and Broad Form Property Damage (including coverage for Explosion, Collapse, and Underground Hazards) shall be as follows:

COMMERCIAL GENERAL LIABILITY INSURANCE:

Each occurrence $2,000,000 – aggregate

Each occurrence $2,000,000 – aggregate

Fire Damage (any one fire) $100,000

Medical Expense (any one person) $5,000

The Contractor shall furnish and maintain during the entire period of construction, a Protective/Contractual Liability policy written in the name of the Owner and Architect with the following limits:

Bodily Injury $1,000,000 – each occurrence Property Damage $1,000,000 – each occurrence Property Damage $1,000,000 – aggregate

Notes;

Products-Completed Operations Insurance shall be maintained for a minimum period of one (1) year after final payment.

The Owner and Architect shall be listed as additional insured. The Owner shall be the certificate holder.

Automobile Liability insurance (owned, non-owned and hired vehicles) for bodily injury and property damage:

AUTOMOBILE LIABILITY INSURANCE:

Bodily Injury $1,000,000 Property Damage $1,000,000

Umbrella or Excess Liability Coverage: UMBRELLA/EXCESS LIABILITY INSURANCE:

Umbrella/Excess Insurance $2,000,000 – each occurrence $2,000,000 – aggregate

SCHEDULE C

SPECIFICATIONS AND DRAWINGS

1. DESCRIPTION

1.1 See attached Reference Drawing.

MANUAL AIR VENT

TRIPLE DUTY VALVE

SHUTOFF VALVE

FLEXIBLE PUMP

CONNECTOR

PRESSURE GAUGE

BOLT PUMP TO

CONCRETE BASE

4" CONCRETE HOUSEKEEPING PAD

1/4"

FLOW MEASURING

DEVICE

STRAINER

MINIMUM 5 PIPE DIAMETERS

STRAIGHT PIPE

REDUCER/INCREASER

FITTING IF REQUIRED

P

GENERAL NOTES:

A. ALL VALVES AND FITTINGS TO BE PIPE SIZE, NOT PUMP INLET AND OUTLET SIZE.

SUCTION DIFFUSER

4" HOUSEKEEPING PAD

EMS TEMPERATURE

SENSOR IN WELL (TYP.)

BOILER

RELIEF VALVE BY

BOILER MFR.

FULL-SIZED RELIEF

PIPING TO NEAREST DRAIN

3/4" DRAIN WITH

BALL VALVE AND

HOSE END

WITH CAP

M

THERMOMETER TYP.)

(30°-240°F RANGE)

PRESSURE GAUGE (TYP.)

MOTORIZED CONTROL

AND ISOLATION VALVE

HHWR

HHWS

LUG-STYLE BUTTERFLY

ISOLATION VALVE

BALL VALVE WITH 3/4"

HOSE END AND CAP

(TYP.)

STRAINER WITH BALL VALVE

DRAIN W/ HOSE THREAD,

SCREWED CAP, AND CHAIN

BALL VALVE (TYP.)

CALIBRATED BALANCING

VALVE

CHECK VALVE

PRESSURE GAUGE

(0-60 PSI RANGE)

THERMOMETER

DEMOLISH AND REMOVE (2) EXISTING B&G 2.5 BB INLINE PUMPS, SUPPORTS, AND

TRIM. REWORK EXISTING ELECTRICAL FEEDS AND SUCTION/DISCHARGE HEADERS

AS REQUIRED FOR NEW BASE MOUNTED PUMPS AND ASSOCIATED ACCESSORIES.

SEE DETAIL 1 FOR NEW PUMP ARRANGEMENT.

SCALE: 1" = 1'-0"1

BASE MOUNTED PUMP1

SCALE: 12" = 1'-0"1

FUTURE HOT WATER BOILER PIPING DETAIL3

SCALE: 12" = 1'-0"1

PUMP DEMOLITION DETAILD1