RFP 21_2386 Attachment A Specifications C32-0001.21.xlsx
XLSX spreadsheet 21 KB Posted
- Attached to
- Compact Grader and Training
- Solicitation number
- RFP 591 210000002386 2
- Issued by
- Van Buren County, Michigan
About this file
This is a specification document for RFP 21_2386 issued by Department 591 for the procurement of one motor grader (equipment number 32-0297) to be supplied by the contractor. The specification document provides detailed technical requirements for a new, latest-model grader with reference to the NorAm 65E Turbo. The document establishes comprehensive standards across multiple categories including base specifications, engine requirements, transmission, braking systems, hydraulic systems, cab features, and attachments. The grader must meet specific dimensional requirements (263 inches in length, 92 inches in width, 118 inches in height) and weight specifications (16,900 lbs total), and must be equipped with a Cummins QSF3.8 turbocharged diesel engine with a minimum of 120 horsepower and Tier IV emission compliance. The specification requires a six-speed power-shift transmission capable of 24 mph top speed, four-wheel service brakes with wet disc design, a fully enclosed cab with air conditioning and heating, and extensive safety and operational features including lighting, mirrors, gauges, and control systems.
The specification document does not contain pricing information, set-aside provisions, incumbent contractor information, funding amounts, or contract term details. Contractors are required to respond to each specification section with either "YES" or provide an explanation and available alternative if unable to comply with the stated requirement. The document mandates that all items be new, include standard features, and meet quality standards including minimum paint film thickness of 2.5 mils, proper wiring protection and anchoring, soldered electrical connections with heat shrink protection, and weather pack connectors for non-factory wiring harnesses.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| RFP 210000002386Compact Grader.docx | DOCX document | |
| Amendment 1 RFP 21_2386 Description (1).docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Sheet1
| RFP Dept. 591, No. 210000002386 | |
| Specification # C32-0001.21 Grader |
All items specified and furnished by the Contractor shall be new of the latest model in current production and shall include all standard features normally offered with these models CONTRACTOR must respond to each section with YES. (or additional information as requested)
If NO is indicated provide explanation and available option.
| Contractor to identify Grader Reference: NorAm 65E Turbo | |
| Bidder Response |
Make:
Model:
| 1.0 | Base Specifications: |
| 1.1 | Unit to have equipment numbers 32-0297 Bead welded in 2" high numbers in a conspicuous location. |
| 1.2 | The complete paint film, to include primer and finish coat, shall have a minimum thickness of 2.5 mils |
| 1.3 | All wires passing through holes in metal or non-metal wearing surfaces, which could cause wear of the insulation, shall be adequately protected by rubber or plastic grommets, and/or non-metal conduit. Ends of all wires shall be adequately anchored to prevent loosening. All wiring shall be properly secured to the unit by proper wiring hangers. |
| 1.4 | Ends of all wires shall be adequately anchored to prevent loosening |
| 1.5 | All electrical connections shall be soldered and enclosed in heat shrink or in water tight junction blocks |
| 1.6 | Scotch locks and wire nuts are not acceptable |
| 1.7 | Any non-factory wiring harness shall be made with weather pack connectors |
| 1.8 | All hydraulic lines shall be adequately protected and shall be properly secured to the unit by proper hose clamps |
| 2.0 | General Data: |
| 2.1 | Operating Weight: |
| a. | Unit shall have a front axle weight of 4,700 lbs. |
| b. | Unit shall be equipped with two (2) Rear axles with a combined rating of 12,200 lbs. |
| c. | Unit shall have a total weight of 16,900 lbs. |
| 2.2 | Overall length of the unit shall be 263 inches |
| 2.3 | Overall width of the unit shall be 92 inches |
| 2.4 | Overall height of the unit shall be 118 inches |
| 2.5 | The center of the front axle to center of the dual rear wheels shall be 186 inches |
| 2.6 | Unit shall be equipped with an articulated frame |
| 2.7 | Unit shall have a heavy duty welded box construction |
| 2.8 | The unit shall be equipped with five(5) transportation tie down points |
| 2.9 | The unit shall be equipped with three(3) points of contact for entry and exit of the machine |
| 3.0 | Engine: |
| 3.1 | The unit shall be equipped with a Cummins QSF3.8 engine |
| 3.2 | The engine shall be a 4 cycle turbo diesel |
| 3.3 | The engine shall have a minimum of 120 hp |
| 3.4 | Unit shall be equipped with a Tier IV emission compliant diesel engine |
| 3.5 | Unit shall be equipped with a spin-on type oil filter |
| 3.6 | Unit shall be equipped with a dry type air cleaner with integrated pre-cleaner |
| 3.7 | Unit shall be equipped with a lockable engine enclosure with side opening doors |
| 3.8 | High engine temperature/low oil pressure shutdown system shall be provided |
| 3.9 | Unit shall be equipped with coolant filters per the engine manufactures specifications |
| 3.10 | Unit shall be equipped with a minimum of a 1000 watt block heater |
| 4.0 | Electrical System: |
| 4.1 | Unit shall have a 12-volt starting system |
| 4.2 | Unit shall have a negative ground system |
| 4.3 | Unit shall be equipped with two (2) 12 volt 1900 CCA heavy-duty battery (series) |
| 4.4 | Unit shall be equipped with a 120 AMP alternator (12 V) |
| 4.5 | Unit shall be equipped with an electric horn |
| 4.6 | Unit shall be equipped with a master electrical shut off switch |
| 4.7 | Unit shall be equipped with a back up alarm |
| 4.8 | Unit shall be equipped with the muffler mounted horizontal under the hood |
| 5.0 | Transmission: |
| 5.1 | Unit shall be equipped with full power shift with a torque converter |
| 5.2 | Unit shall be equipped with a Six (6) forward speed transmission |
| 5.3 | Unit shall be capable of a top speed of 24 mph. |
| 5.4 | Unit shall be equipped with an electric shift control |
| 5.5 | Unit shall be equipped with a shift inhibit system |
| 5.6 | Unit shall be equipped with an LCD operations monitor |
| 6.0 | Brakes: |
| 6.1 | Unit shall be equipped with power brakes |
| 6.2 | Unit shall be equipped with 4 wheel service brakes |
| 6.3 | The brakes shall be self adjusting, wet disc type brakes |
| 6.4 | The brakes shall be a tandem by tandem system |
| 6.5 | Unit shall be equipped with mechanical parking brakes |
| 7.0 | Axles: |
| 7.1 | Unit shall have a front axle clearance of 20.3 inches |
| 7.2 | Unit shall be equipped with torque proportioning differentials |
| 7.3 | Unit shall be equipped with oscillating chain driven rear tandems |
| 8.0 | Tires: |
| 8.1 | Unit shall be equipped with 15:00 x 19.5 (8PR) G2 tubeless tires |
| 9.0 | Hydraulic System: |
| 9.1 | Unit will be equipped with full flow spin on hydraulic filters |
| 9.2 | Unit will be equipped with a hydraulic pump capable of operating all hydraulic operations |
| 9.3 | Unit will be equipped with a hydraulic reservoir large enough to operate the hydraulic system |
| 10.0 | ROPS Canopy: |
| 10.1 | Unit shall be equipped with a fully enclosed cab |
| 10.2 | Unit shall be equipped with tinted glass |
| 10.3 | Unit shall be equipped with a sliding rear window |
| 10.4 | Unit shall be equipped with front and rear windshield wipers with washers |
| 10.5 | Unit shall be equipped with two (2) defroster fans |
| 10.6 | Unit shall be equipped with an inside mirror |
| 10.6 | Unit shall be equipped with two (2) external mirrors |
| 10.7 | Unit shall be equipped with sound suppression system |
| 10.8 | Unit shall be equipped with a 40,000 BTU heater |
| 10.9 | Unit shall be equipped with air conditioning |
| 10.10 | Unit shall be equipped with a radio group |
| 10.11 | Unit shall be equipped with a cloth seat with air suspension |
| 10.12 | Unit shall be equipped with a seat belt |
| 10.13 | Unit shall be equipped with a dome light |
| 10.14 | Unit shall be equipped with a floormat |
| 10.15 | Unit shall be equipped with a headliner |
| 10.16 | Unit shall be equipped with a glove box |
| 10.17 | Unit shall be equipped with the following gauges |
| a. | Engine coolant temperature |
| b. | Engine oil pressure |
| c. | Hour meter |
| d. | Tachometer |
| e. | Voltmeter |
| f. | Air cleaner service indicator |
| g. | Transmission oil temperature |
| h. | Fuel and DEF level |
| 10.18 | Unit shall be equipped with an adjustable control console with the following hydraulic controls |
| a. | Articulation |
| b. | Circle side shift |
| c. | Circle turn |
| d. | Moldboard lift/lower |
| e. | Moldboard side shift |
| f. | Wheel lean |
| 10.19 | Unit shall be equipped with an implement control lever lock |
| 11.0 | Lighting |
| 11.1 | Unit shall be equipped with the following lighting |
| 11.2 | Two(2) front headlights with hi/low beams |
| 11.3 | Two front work lights |
| 11.4 | Flood lights, two(2) front, two(2) rear |
| 11.5 | Turn signals, front and rear |
| 11.6 | Stop and tail lights |
| 11.7 | Amber strobe light with 360 degree visibility |
| 12.0 | Moldboard |
| 12.1 | Unit shall be equipped with a 12' by 21" high moldboard, rollaway blade with involute curve |
| 12.2 | Unit shall be equipped with hydraulic moldboard pitch |
| 12.3 | Moldboard shall have a replaceable cutting edges |
| 12.4 | Moldboard shall have interchangeable end bits |
| 12.5 | Unit shall be equipped with 90 degree bank slope saddle |
| 13.0 | Circle |
| 13.1 | Unit shall be equipped with a 53" diameter gear driven circle and rollaway blade |
| 13.2 | Unit shall have the circle supported by an "A" frame |
| 13.3 | Unit shall have the circle equipped with four(4) guide wear plates |
| 13.4 | Unit shall have a circle which is shim adjustable |
| 13.5 | Unit shall have a circle the has 360 degree rotation |
| 13.6 | Unit shall have a hydraulic circle side shift |
| 14.0 | Attachments |
| 14.1 | Unit shall be equipped to allow front mounting of auxiliary attachments |
| 14.2 | Unit shall be equipped with front scarifier |
| 14.3 | Unit shall be equipped with hydraulic piping to the front and rear for option hydraulic tool operation |
END OF SPECIFICATION
&14Attachment A
Sheet2
File details come from the government source that posted it. Updated .