RFP 200000002105 Kitchen Chemicals.docx

STATE OF MICHIGAN

Department of Corrections

Kitchen Chemicals for MSI Request for Proposal No. 200000002105

Solicitation Manager Name: Cathy Carr Direct Phone: 517-241-2192 Email: CarrCmichigan.gov

This is a Request for Proposal (RFP) for:

Kitchen Chemicals for MSI

RFP Timeline20

*A bidder’s proposal received at 3:00:01 p.m. Eastern is late and subject to disqualification.

This RFP is subject to change. Check www.michigan.gov/SIGMAVSS for current information.

PROPOSAL INSTRUCTIONS

1. PROPOSAL PREPARATION. The State recommends reading all RFP materials prior to preparing a proposal, particularly these Proposal Instructions and the Vendor Questions Worksheet. Bidders must follow these Proposal Instructions and provide a complete response to the items indicated in the table below. References and links to websites or external sources may not be used in lieu of providing the information requested in the RFP within the proposal. Include the bidder’s company name in the header of all documents submitted with your proposal.

ALTERNATE SPECIFICATIONS

Bidders must submit any proposed alternate specifications or products as a question by the deadline for bidder questions. Specifications must be emailed with the question. The State may or may not approve a proposed alternate, in its sole discretion. Approval or disapproval of proposed alternates will be posted in the Q&A document online.

RFP Structure and Documentation

2. CONTACT INFORMATION FOR THE STATE. The sole point of contact for the State concerning this RFP is listed on the Cover Page. Contacting any other State personnel, agent, consultant, or representative about this RFP may result in bidder disqualification.

3. OPTIONAL PRE-PROPOSAL MEETING.

An optional pre-proposal meeting will be held remotely on July 16, 2020 at 1:00 pm Eastern Time. The conference line number is (248) 509-0316 Conference ID: 963 162 790#

The purpose of the pre-proposal meeting is to discuss the RFP and the work to be performed. Statements made by the Solicitation Manager or designee at a pre-proposal meeting are not considered modifications to the RFP. If, however, the Solicitation Manager determines modifications to the RFP are warranted after the meeting, modifications will be posted in writing on www.michigan.gov/SIGMAVSS as explained in Section 4, Modifications.

Attendance at the pre-proposal meeting is limited to 1 person per bidder. A bidder may be disqualified by being late. Subcontractor sign-in is permitted in lieu of the bidder as evidence of attendance. Accessibility requests for reasonable accommodations at the pre-proposal meeting should be made with the Solicitation Manager at least 5 business days before the date of the meeting. Accommodation requests received outside this time period cannot be guaranteed.

4. MODIFICATIONS. The State may modify this RFP at any time. Modifications will be posted on www.michigan.gov/SIGMAVSS . This is the only method by which the RFP may be modified.

5. QUESTIONS. Bidder questions about this RFP must be emailed to the Solicitation Manager no later than the time and date specified on the Cover Page. In the interest of transparency, only written questions are accepted. Answers to questions will be posted on www.michigan.gov/SIGMAVSS. Submit questions using the format below; a Microsoft Excel format or similar is suggested.

6. DELIVERY OF PROPOSAL.

Electronic – The bidder must submit its proposal, all attachments, and any modifications or withdrawals electronically through www.michigan.gov/SIGMAVSS. The price proposal should be saved separately from all other proposal documents. The bidder should submit all documents in a modifiable (native) format (examples include but are not limited to Microsoft Word or Excel and Google Docs or Sheets). In addition to submitting documents in a modifiable format, the bidder may also submit copies of documents in PDF. Attachment file size is limited to 6 MB per document. Bidder’s failure to submit a proposal as required may result in disqualification. The proposal and attachments must be fully uploaded and submitted prior to the proposal deadline. Do not wait until the last minute to submit a proposal, as the SIGMA VSS system requires the creation of an account and entry of certain information, in addition to uploading and submitting the materials. The SIGMA VSS system will not allow a proposal to be submitted after the proposal deadline identified in the solicitation Closing On/Closing Date fields (Summary view/Detail view), even if a portion of the proposal has been uploaded.

Questions on how to submit information or how to navigate in the SIGMA VSS system can be answered by calling (517) 284-0540 or (888) 734-9749. The Solicitation Manager will not provide assistance related to the submittal of the proposal and all attachments on the day of the proposal deadline. Responsibility for a complete submission lies with the bidder.

Hard Copy – The bidder should also submit its proposal in hard copy form (paper). The bidder should submit one copy of its technical proposal, attachments, and separately sealed price proposal by the proposal deadline. A hard copy proposal received after the proposal deadline identified on the Cover Page is considered a late proposal. The bidder must submit its hard copy proposal utilizing one of the following methods:

Delivery or Courier Michigan Department of Corrections – Finance Division 206 E. Michigan Avenue Lansing, MI 48933 U.S. Postal Service Michigan Department of Corrections – Finance Division PO Box 30003 Lansing, MI 48909

When submitting hard copies of a proposal, the bidder should:

· Allow adequate time to clear State-building security checkpoints.

· Label the RFP number and bidder name on the outside of each package. If a delivery or courier service is used that prohibits markings on its package, this information should be placed on the outside of an interior package.

· Not submit responses to more than one RFP in one package.

7. MANDATORY MINIMUM REQUIREMENTS. . To avoid disqualification, the bidder must provide documentation to support the following:

The prime Contractor must be the manufacturer or an authorized distributor, directly providing SDS and recall notification.

Only proposals meeting the mandatory minimum requirements will be considered for evaluation.

8. EVALUATION PROCESS. The State will evaluate each proposal based on the following factors:

Proposals receiving 80 or more technical evaluation points will have pricing evaluated and considered for award.

The State may utilize all bidder information, without regard to a proposal’s technical score, to determine fair market value for goods or services sought. The State is not obligated to accept the lowest price proposal. If applicable, the State’s evaluation will include consideration of a bidder’s qualified disabled veterans/service-disabled veteran owned business(QDV/SDVOB) status under MCL 18.1261(8). Additional information on the SDVOB preference is available at: https://www.michigan.gov/dtmb/0,5552,7-358-82550_85746_48677-412612--,00.html.

The State strongly encourages strict adherence to the Contract Terms. The State reserves the right to deem a bid non-responsive for failure to accept the Contract Terms. Nevertheless, the bidder may submit proposed changes to the Contract Terms in track changes (i.e., visible edits) with an explanation of the bidder’s need for each proposed change. Failure to include track changes with an explanation of the bidder’s need for the proposed change constitutes the bidder’s acceptance of the Contract Terms. General statements, such as that the bidder reserves the right to negotiate the terms and conditions, may be considered non-responsive.

The State may but is not required to conduct an on-site visit to tour and inspect the bidder’s facilities; require an oral presentation of the bidder's proposal; conduct interviews, research, reference checks, and background checks; and request additional price concessions at any point during the evaluation process.

9. NOTICE OF DEFICIENCY. The State reserves the right to issue a Notice of Deficiency to bidders if the State determines after the proposal deadline that a portion of the RFP was deficient, unclear, or ambiguous. Failure to respond to a Notice of Deficiency timely may be cause for disqualification.

10. CLARIFICATION REQUEST. The State reserves the right to issue a Clarification Request to a bidder to clarify its proposal if the State determines the proposal is not clear. Failure to respond to a Clarification Request timely may be cause for disqualification.

11. RESERVATIONS. The State reserves the right to:

a. Disqualify a bidder for failure to follow these instructions.

b. Discontinue the RFP process at any time for any or no reason. The issuance of an RFP, your preparation and submission of a proposal, and the State’s subsequent receipt and evaluation of your proposal does not commit the State to award a contract to you or anyone, even if all the requirements in the RFP are met.

c. Consider late proposals if: (i) no other proposals are received; (ii) no complete proposals are received; (iii) the State received complete proposals, but the proposals did not meet mandatory minimum requirements or technical criteria; or (iv) the award process fails to result in an award.

d. Consider an otherwise disqualified proposal, if no other proposals are received.

e. Disqualify a proposal based on: (i) information provided by the bidder in response to this RFP; (2) the bidder’s failure to complete registration on www.michigan.gov/SIGMAVSS ; or (3) if it is determined that a bidder purposely or willfully submitted false or misleading information in response to the RFP.

f. Consider prior performance with the State in making its award decision.

g. Consider overall economic impact to the State when evaluating proposal pricing and in the final award recommendation. This includes but is not limited to: considering principal place of performance, number of Michigan citizens employed or potentially employed, dollars paid to Michigan residents, Michigan capital investments, job creation, tax revenue implications, and economically disadvantaged businesses.

h. Consider total-cost-of-ownership factors (e.g., transition and training costs) when evaluating proposal pricing and in the final award recommendation.

i. Refuse to award a contract to any bidder that has failed to pay State taxes or has outstanding debt with the State.

j. Enter into negotiations with one or more bidders on price, terms, technical requirements, or other deliverables.

k. Award multiple, optional-use contracts, or award by Contract Activity.

l. Evaluate the proposal outside the scope identified in the Evaluation Process section of this document if the State receives only one proposal.

12. AWARD RECOMMENDATION. The contract will be awarded to the responsive and responsible bidder who offers the best value to the State, as determined by the State. Best value will be determined by the bidder meeting the minimum point threshold and offering the best combination of the factors stated in the Evaluation Process section of this document and price, as demonstrated by the proposal. The State will post an Award Recommendation and Evaluation Synopsis on www.michigan.gov/SIGMAVSS .

13. DEBRIEF MEETING AND BID PROTEST. The State will post an Award Recommendation and Evaluation Synopsis, which will provide instructions on how to request a debrief meeting

If you wish to initiate a protest of the award, you must submit your written protest to HawkerR@michigan.gov no later than 5:00 p.m. EDT, 5 calendar days after posting the Notice of Recommendation for Award, or by 5:00 p.m. the next business day if that date falls on a state holiday or weekend. The State reserves the right to adjust this timing and will publish any change on the SIGMA VSS system.

Additional information about the protest process is available at www.michigan.gov/micontractconnect under the “Programs and Policies” link.

14. STATE ADMINISTRATIVE BOARD. Contracts equal to $250,000 or greater than require approval by the State Administrative Board. The State Administrative Board’s decision is final; however, its approval does not constitute a contract. The award process is not complete until the awarded contractor receives a contract fully executed by all parties.

15. GENERAL CONDITIONS. The State will not be liable for any costs, expenses, or damages incurred by a bidder participating in this solicitation. The bidder agrees that its proposal will be considered an offer to do business with the State in accordance with its proposal, including the Contract Terms, and that its proposal will be irrevocable and binding for a period of 180 calendar days from date of submission. If a contract is awarded to the bidder, the State may, at its option, incorporate any part of the bidder’s proposal into a contract. This RFP is not an offer to enter into a contract. This RFP may not provide a complete statement of the State’s environment or contain all matters upon which agreement must be reached. Other than verified trade secrets, proposals submitted via www.michigan.gov/SIGMAVSS are the State’s property.

16. CONFIDENTIAL TREATMENT FORM AND THE FREEDOM OF INFORMATION ACT. All portions of the bidder’s proposal and resulting contract are subject to disclosure as required under Michigan’s Freedom of Information Act (FOIA), MCL 15.231, et seq. However, some information may be exempt from disclosure. Under MCL 18.1261(13)(b), records containing “a trade secret as defined under section 2 of the uniform trade secrets act, 1998 PA 448, MCL 445.1902,” are exempt from disclosure under FOIA. In addition, “financial or proprietary information” submitted with a bidder’s proposal is exempt from disclosure under FOIA. A bidder’s failure to comply with this Section is grounds for rejecting a bidder’s proposal as non-responsive. As a part of its proposal, each bidder must follow the procedure below.

a. SUBMIT A COMPLETED “CONFIDENTIAL TREATMENT FORM” (CT FORM) WITH YOUR BID. Completion and submission of the CT Form is required regardless of whether the bidder seeks confidential treatment of information. Failure to submit a completed CT Form may be cause for disqualification from the solicitation process.

i. Complete and sign Section 1 of the CT Form if the bidder does NOT request confidential treatment of information contained in its proposal; or

ii. Complete and sign Section 2 of the CT Form if the bidder requests confidential treatment of certain information. Bidder must also submit a “Public Copy” of the proposal with the trade secret, financial, and proprietary information redacted and clearly labeled as the “Public Copy.”

b. FOIA REQUESTS. If a FOIA request is made for a bidder’s proposal, the Public Copy may be distributed to the public along with the bidder’s CT Form. The CT Form is a public document and serves as an explanation for the redactions to the Public Copy. Do not put any trade secret, financial, or proprietary information in the CT Form. Do not redact the CT Form itself.

c. NO ADVICE. The State will not advise a bidder as to the nature or content of documents entitled to protection from disclosure under FOIA or other laws, as to the interpretation of such laws, or as to the definition of trade secret or financial or proprietary information. Nothing contained in this provision will modify or amend requirements and obligations imposed on the State by FOIA or other applicable law.

d. FAILURE TO REQUEST CONFIDENTIAL TREATMENT. Failure to request material be treated as confidential as specified herein relieves the State, its agencies, and personnel from any responsibility for maintaining material in confidence.

e. Bids containing a request to maintain an entire proposal as confidential may be rejected as non-responsive. Bidders may not request confidential treatment with respect to resumes, pricing, and marketing materials. The State reserves the right to determine whether material designated as exempt by a bidder falls under MCL 18.1261 or other applicable FOIA exemptions. If a FOIA request is made for materials that the bidder has identified as trade secret, financial, or proprietary information, the State has the final authority to determine whether the materials are exempt from disclosure under FOIA.

f. Bidder forever releases the State, its departments, subdivisions, officers, and employees from all claims, rights, actions, demands, damages, liabilities, expenses and fees, which arise out of or relate to the disclosure of all or a portion of bidder’s proposal submitted under this RFP. Bidder must defend, indemnify and hold the State, its departments, subdivisions, officers, and employees harmless, without limitation, from and against all actions, claims, losses, liabilities, damages, costs, attorney fees, and expenses (including those required to establish the right to indemnification), arising out of or relating to any FOIA request, including potential litigation and appeals, related to the portion of bidder’s proposal submitted under this RFP that bidder has identified as a trade secret, or financial or proprietary information. The State will notify bidder in writing if indemnification is sought. The State is entitled to: (i) regular updates on proceeding status; (ii) participate in the defense of the proceeding; (iii) employ its own counsel; and to (iv) retain control of the defense, or any portion thereof, if the State deems necessary. Bidder will not, without the State’s written consent (not to be unreasonably withheld), settle, compromise, or consent to the entry of any judgment in or otherwise seek to terminate any claim, action, or proceeding. If a State employee, official, or law is involved or challenged, the State may control the defense of that portion of the claim. Any litigation activity on behalf of the State, or any of its subdivisions under this Section, must be coordinated with the Department of Attorney General. An attorney designated to represent the State may not do so until approved by the Michigan Attorney General and appointed as a Special Assistant Attorney General.

CONFIDENTIAL TREATMENT FORM (CT FORM)

INSTRUCTIONS. Complete either Section 1 or Section 2 of this CT Form and sign where indicated. This CT Form must be signed by the individual who signed the bidder’s proposal. A completed CT Form must be submitted with your proposal, regardless of whether your proposal contains confidential information.

Failure to submit a completed CT Form with your bid is grounds for rejecting the proposal as non-responsive. See the Confidential Treatment Form and The Freedom of Information Act of the Proposal Instructions for additional information.

Section 1. Confidential Treatment Is Not Requested

This section must be completed, signed, and submitted with the proposal if bidder does not request confidential treatment of any material contained in the proposal.

By signing below, the bidder affirms that confidential treatment of material contained in the proposal is not requested.

[Printed Name] [Title] [Company]

Section 2. Confidential Treatment Is Requested

The section must be completed, signed, and submitted with the proposal if bidder requests confidential treatment of any material contained in the proposal. Submission of a completed CT Form is required to request confidential treatment.

Provide the information in the table below. Bidder may add rows or additional pages using the same format shown in the table. Bidder must specifically identify the information to be protected as confidential and state the reasons why protection is necessary.

The CT Form will not be considered fully complete unless, for each confidentiality request, the bidder: (1) identifies whether the material is a trade secret (TS), financial information (FI), or proprietary information (PI); (2) explains the specific legal grounds that support treatment of the material as TS, FI, or PI; and (3) provides the contact information for the person at bidder’s organization authorized to respond to inquiries by the State concerning the material. Bidders must not simply cite to an applicable act or case name; rather, bidders must provide a complete justification as to how the material falls within the scope of an applicable act or relevant case law.

CONFIDENTIAL TREATMENT FORM (CT FORM)

By signing below, the bidder affirms that confidential treatment of material contained in its proposal is requested and has attached to this form a redacted “Public Copy” of the bidder’s proposal.

[Printed Name] [Title] [Company]

VENDOR QUESTIONS WORKSHEET

Provide a detailed response to each question. “You” and “company” refers to the bidder.

1. Contact Information

Bidder’s sole contact person during the RFP process. Include name, title, address, email, and phone number.

Person authorized to receive and sign a resulting contract. Include name, title, address, email, phone number and vendor customer code in SIGMA VSS.

2. Company Background Information

Legal business name and address. Include business entity designation, e.g., sole proprietor, Inc., LLC, or LLP.

What state was the company formed in?

Phone number

Website address

Number of years in business and number of employees

Legal business name and address of parent company, if any

Has there been a recent change in organizational structure (e.g., management team) or control (e.g., merger or acquisition) of your company? If the answer is yes: (a) explain why the change occurred and (b) how this change has affected your company.

Discuss your company’s history. Has growth been organic, through mergers and acquisitions, or both?

Has bidder ever been debarred, suspended, or disqualified from bidding or contracting with any entity, including the State of Michigan? If yes, provide the date, the entity, and details about the situation.

Has your company been a party to litigation against the State of Michigan? If the answer is yes, then state the date of initial filing, case name and court number, and jurisdiction.

Within the last 5 years, has your company or any of its related business entities defaulted on a contract or had a contract terminated for cause? If yes, provide the date, contracting entity, type of contract, and details about the termination or default.

State your gross annual sales for each of the last 5 years.

If receiving a contract under this RFP will increase your gross revenue by more than 25% from last year’s sales, explain how the company will scale-up to manage this increase.

Describe partnerships and strategic relationships you think will bring significant value to the State.

State the physical address of the place of business that would have primary responsibility for this account if bidder is awarded a contract under this RFP.

3. Qualified Disabled Veteran/Service-Disabled Veteran-Owned Business Program

To demonstrate qualification as a qualified disabled veteran, you must provide:

(a) Proof of service and conditions of discharge (DD214 or equivalent);

(b) Proof of service-connected disability (DD214 if the disability was documented at discharge or Veterans Administration Rating Decision Letter or equivalent if the disability was documented after discharge); and

(c) Legal documents setting forth the ownership of the business entity.

In lieu of the documentation identified above, you may provide proof of certification by the National Veterans Business Development Council.

Enter the names of documents submitted with your proposal to demonstrate status as a qualified disabled veteran.

4. Participation in RFP Development or Evaluation

Did your company, an employee, agent, or representative of your company, or any affiliated entity participate in developing any component of this solicitation? For purposes of this question, business concerns, organizations, or individuals are affiliates of each other if, directly or indirectly: (1) either one controls or has power to control the other or (2) a third-party controls or has the power to control both. Indicia of control include, but are not limited to, interlocking management or ownership, identity of interests among family members, shared facilities or equipment, and common use of employees.

Enter YES or NO.

If you enter “YES”, you are not eligible for contract award or to work as a subcontractor for the awarded vendor.

If you enter “YES,” you are not eligible for contract award. An awarded vendor may not partner or subcontract with anyone to provide goods and services required under a resulting contract if that subcontractor or partner assisted in the development of this solicitation.

If you enter “YES”, you are not eligible for contract award or to work as a subcontractor for the awarded vendor.

5. State of Michigan Experience and Prior Experience

Does your company have experience working with the State of Michigan? If so, please provide a list (including the contract number) of the contracts you hold or have held with the State for the last 10 years.

Describe at least 3 relevant experiences from the last 5 years supporting your ability to successfully manage a contract of similar size and scope for the work described in this RFP.

Experience 1

Company name Contact name Contact role at time of project Contact phone Contact email

City State Zip

1. Project name and description of the scope of the project

2. What role did your company play?

3. How is this project experience relevant to the subject of this RFP?

Dollar value

Start and end date (mm/yy – mm/yy)

Status (completed, live, other – specify phase)

Results obtained

Experience 2

Company name

Contact role at time of project

City

1. Project name and description of the scope of the project

Dollar value

Start and end date (mm/yy – mm/yy)

Status (completed, live, other – specify phase)

Results obtained

Experience 3

Company name

Contact role at time of project

City

1. Project name and description of the scope of the project

Dollar value

Start and end date (mm/yy – mm/yy)

Status (completed, live, other – specify phase)

Results obtained

6. Standard Contract Terms

Bidder must affirm agreement with the attached Contract Terms. If not in agreement, written exceptions in accordance with the Evaluation Process section of the Proposal Instructions must be provided with Bidder’s proposal.

7. Michigan Economic Impact

Number of employees currently employed at locations within the State of Michigan

Number of additional employees to be employed at locations within the State of Michigan if awarded this Contract (if any)

Minimum wage paid to employees employed at locations within the State of Michigan

Average wage paid to employees employed at locations within the State of Michigan

Percentage of employees employed at locations within the State of Michigan that are covered by employer-provided health insurance

8. Other

Version 11 (5/2020) 2

SCHEDULE A

STATEMENT OF WORK

CONTRACT ACTIVITIES

This schedule identifies the anticipated requirements of any Contract resulting from this RFP. The term “Contractor” in this document refers to a bidder responding to this RFP.

The Contractor must respond to each requirement or question and explain how it will fulfill each requirement. Attach any supplemental information and appropriately reference within your response.

BACKGROUND

The Michigan Department of Corrections (MDOC), Michigan State Industries (MSI), manufactures goods and provides services for sale to state agencies, tax supported entities and local governmental units. Concentrated bulk kitchen chemicals are used in the production of kitchen chemicals for the Michigan Department of Corrections.

SCOPE

The Contractor will provide kitchen chemicals. The State reserves the right to add or delete products to best meet the needs of the ordering entity.

Bidders must submit any proposed alternate specifications or products as a question by the deadline for bidder questions. Specifications must be emailed with the question. The State may or may not approve a proposed alternate, in its sole discretion. Approval or disapproval of proposed alternates will be posted in the Q&A document online.

REQUIREMENTS

1. General Requirements

1.1. Product Specifications

The Contractor must provide concentrated, bulk kitchen chemicals for the MDOC/MSI according to the following specifications. The Contractor will be required to provide the kitchen chemicals as ordered and within the time constraints required.

The Contractor is solely responsible to ensure that chemicals delivered meet the specifications and requirements of this RFP.

The prime Contractor must be the manufacturer or an authorized distributor, directly providing SDS and recall notification.

Are you the manufacturer or an authorized distributor?

A. General Specifications

1. Must have a minimum 2-year shelf life.

2. Must be free from any sediment or foreign matter.

3. Must provide Certificate of Analysis and SDS with bid submission for both undiluted product and diluted finished product (as mixed to manufacturer’s specifications.)

4. Deliveries must include a Certificate of Analysis with lot number for both undiluted product and diluted finished product (as mixed to manufacturer’s specifications.) and expiration date.

5. Totes must have an integrated pallet base mount that provides forklift and/or pallet jack maneuverability.

6. Totes must have an open and close flow valve attached to bottom of tote to disperse product.

7. MSI and Contractor will confirm product color and scent or unscented after Contract award.

8. Lot and manufacture date must be marked on each packaging unit (tote or pail).

9. MSI prefers products with National Fire Prevention Association (NFPA) ratings of 2 or less whenever possible.

10. Products must have product labels that state the country where the product was manufactured.

Bidder must check only one box below and identify exception(s):

B. Line Specifications

1. Automatic Dishwashing Detergent The following product is MDOC approved and is provided as a reference brand:

Arrow Chemical Products Inc. Item # 109 for the diluted, finished good. See https://arrowchemicalproducts.com/. MDOC requires a concentrated version of this product (see below), or any equivalent approved during the bidder question and answer period.

Bidder must provide the following information.

a. MDOC prefers a concentrated 330-gallon palletized tote. The 330-gallon concentrated tote should make a minimum of 660 gallons of the diluted finished good.

Bidder must check only one box below and identify exception(s):

Bidder must provide the following information.

b. The automatic dishwashing detergent must be suitable for injector fed automatic industrial dishwashers.

Bidder must check only one box below and identify exception(s):

c. The automatic dishwashing detergent must be phosphate and nonylphenol free. Certificate of Analysis must be provided with the RFP for this requirement.

Bidder must check only one box below and identify exception(s):

d. The automatic dishwashing detergent must be a liquid, aqueous solution.

Bidder must check only one box below and identify exception(s):

e. The automatic dishwashing detergent must have a pH 11 – 13 when diluted according to the manufacturer’s dilution rate. Certificate of Analysis must be provided with the RFP for this requirement.

Bidder must provide the PH value when product is diluted according to the manufacturer’s dilution rate.

f. The automatic dishwashing detergent must provide cleaning and stain removal while minimizing machine build up.

Bidder must check only one box below and identify exception(s):

g. The automatic dishwashing detergent must not have any irritant or undesirable effect on the skin and hands under normal usage conditions and when proper precautions are taken in accordance with manufacturer’s instructions. Bidder must provide SDS showing proper precautions.

Bidder must check only one box below and identify exception(s):

2. Pot and Pan Liquid Detergent – for manual hand dish washing The following product is MDOC approved and is provided as a reference brand: Arrow Chemical Products Inc. Item # 169 for the diluted, finished good. See https://arrowchemicalproducts.com/. MDOC requires a concentrated version of this product (see below), or any equivalent approved during the bidder question and answer period.

Bidder must provide the following information.

a. MDOC prefers a concentrated 330-gallon palletized tote of this product. The 330-gallon concentrated tote should make a minimum of 660 gallons of the diluted finished good.

Bidder must check only one box below and identify exception(s):

Bidder must provide the following information.

b. The pot and pan liquid detergent will be dispensed through an automatic dispensing unit provided by MSI. The product must allow dispensing through an automatic dispenser.

Bidder must check only one box below and identify exception(s):

c. The pot and pan liquid detergent must be effective cutting grease.

Bidder must check only one box below and identify exception(s):

d. The pot and pan liquid detergent must not have any irritant or undesirable effect on the skin and hands under normal usage conditions and when proper precautions are taken in accordance with manufacturer’s instructions. Bidder must provide SDS showing proper precautions.

Bidder must check only one box below and identify exception(s):

e. The pot and pan liquid detergent mush have a PH 7-8 of diluted product when diluted according to manufacturer’s dilution rate. Certificate of Analysis must be provided with the RFP for this requirement.

Bidder must provide the PH value when product is diluted according to the manufacturer’s dilution rate.

f. The pot and pan liquid detergent concentrated product must be a minimum of 30% active containing Anionic/non ionic blend of detergents. Certificate of Analysis must be provided with the RFP for this requirement.

Bidder must check only one box below and identify exception(s):

g. The pot and pan liquid detergent must be a liquid, aqueous solution.

Bidder must check only one box below and identify exception(s):

3. Heavy-Duty Degreaser The following product is MDOC approved and is provided as a reference brand: Arrow Chemical Products Inc. Item # 234 for the diluted, finished good. See https://arrowchemicalproducts.com/. MDOC requires a concentrated version of this product (see below), or any equivalent approved during the bidder question and answer period.

Bidder must provide the following information.

If so, provide diluted product number.

a. MDOC prefers a concentrated 330-gallon palletized tote of this product. The 330-gallon concentrated tote should make a minimum of 660 gallons of the diluted finished good.

Bidder must check only one box below and identify exception(s):

Bidder must provide the following information.

b. The heavy-duty degreaser must be effective at cutting grease.

Bidder must check only one box below and identify exception(s):

a. The heavy-duty degreaser must be effective and safe to use on kitchen floors, equipment, pressure washers, steam cleaners, auto-scrubbers.

Bidder must check only one box below and identify exception(s):

4. Kitchen Quarry Tile Cleaner The following product is MDOC approved and is provided as a reference brand: Arrow Chemical Products Inc. Use Arrow Item Chemical Products Inc. # 244 as the reference for the diluted, finished good. See https://arrowchemicalproducts.com/. MDOC requires a concentrated version of this product, or any equivalent approved during the bidder question and answer period.

Bidder must provide the following information.

Does this concentrated product produce an approved diluted product?

a. MDOC prefers a concentrated 330-gallon palletized tote of this product. The 330-gallon concentrated tote should make a minimum of 660 gallons of the diluted finished good.

Bidder must check only one box below and identify exception(s):

Bidder must provide the following information.

b. The kitchen quarry tile cleaner must have a non-slip finish after application.

Bidder must check only one box below and identify exception(s):

5. Concentrated Citrus/Peroxide Cleaner The following product is MDOC approved and is provided as a reference brand: Arrow Chemical Products Inc. Use Arrow Chemical Products Inc. Item # 246 as the reference for the diluted, finished good. See https://arrowchemicalproducts.com/. MDOC requires a concentrated version of this product, or any equivalent approved during the bidder question and answer period.

Bidder must provide the following information.

a. MDOC prefers a concentrated 330-gallon palletized tote of this product. The 330-gallon concentrated tote should make a minimum of 660 gallons of the diluted finished good.

Bidder must check only one box below and identify exception(s):

Bidder must provide the following information.

b. The concentrated citrus/peroxide cleaner must contain d ‘limonene and hydrogen peroxide. Certificate of Analysis must be provided with the RFP for this requirement.

Bidder must check only one box below and identify exception(s):

c. The concentrated citrus/peroxide cleaner must be effective on tile, grout, bathroom surfaces.

Bidder must check only one box below and identify exception(s):

d. The concentrated citrus/peroxide cleaner must be effective at eliminating odors.

Bidder must check only one box below and identify exception(s):

e. The concentrated citrus/peroxide cleaner must be phosphate and nonylphenol free. A Certificate of Analysis must be provided with the RFP for this requirement.

Bidder must check only one box below and identify exception(s):

f. The concentrated citrus/peroxide cleaner must be effective on lifting and removing difficult stains, soils, and odors from hard surfaces.

Bidder must check only one box below and identify exception(s):

6. Concentrated Freezer Cleaner The following product is MDOC approved and is provided as a reference brand: Arrow Chemical Products Inc. Use Arrow Chemical Products Inc. Item # 134 as the reference for the diluted, finished good. See https://arrowchemicalproducts.com/. MDOC requires a concentrated version of this product, or any equivalent approved during the bidder question and answer period.

Bidder must provide the following information.

a. MDOC prefers case packaging of four 1-gallon…