RFI_SAM.GOV-METAL PARTS.pdf

DEPARTMENT OF THE AIR FORCE

502D AIR BASE WING

JOINT BASE SAN ANTONIO

20 February 2026

TO: 502D Contracting Squadron 1655 Selfridge Ave.

JBSA Lackland AFB, TX 78236

FROM: Company Name_________________________________

Address_______________________________________

Address _______________________________________

Phone No. _____________________________________

Email Address__________________________________

Cage Code ____________________________________

SUBJECT: TDS T-6 Immersive Training Devices (ITDs) Metal Parts

1. The Government is only conducting market research and attaining information to identify contractors that are capable of providing all items/services listed below and the cost associated to acquire these specific items/services. All information provided is STRICTLY VOLUNTARY.

2. Is your company a small business? ______________ (Yes/ No)

3. If Small Business, please identify company’s socio-economic concern(s): ______________________ (HUBZone, service-disable veteran-owned small bus., women-owned small bus., etc…)

4. Please take the opportunity to provide cost input for the products listed below (voluntarily).

Product

QTY Unit Unit Price Extended Amount

Tight-tolerance 932 bearing bronze rod, 1-1/4 in diameter, 12 in long 3 EA D-profile rotary shaft, 1045 carbon steel, ¼ in diameter, 12 in long 42 EA Aluminum blind rivets with aluminum mandrel, flush-mount, 1/8 in diameter, 0.092-0.125 in material 2,250 EA Male-female threaded hex standoff, aluminum, ¼ in hex size, 1 ¼ in long, 8-32 thread size 170 EA 9/16 in long split ring-to-split ring miniature ball bearing swivel 85 EA Brass washer for ¼ in screw size, general purpose,

0.260 in ID 200 EA

Extended Amount

Oil-embedded bronze thrust bearing for 3/8 in shaft diameter, 1/16 in thickness 600 EA Oil-embedded bronze thrust bearing for ¼ in shaft diameter, 7/16 in OD, 1/16 in thickness 950 EA 18-8 stainless steel narrow-profile hex nuts, 4-40 thread size 200 EA 18-8 stainless steel ASME washer for number 6 screw size, regular ASME designation 150 EA 18-8 stainless steel button head hex drive screw, 4-40 thread size, ½ in long 800 EA 18-8 stainless steel precision shoulder screw 5/32 in shoulder diameter, 9/16 in shoulder length, 6-32 thread 90 EA 18-8 stainless steel precision shoulder screw, ¼ in shoulder diameter, 11/16 in shoulder length, 10-32 thread 100 EA Low-strength steel nylon-insert locknuts, thin-profile, black zinc-plated, 10-32 thread size 125 EA Black-oxide 18-8 stainless steel Phillips flat head screws, 82-degree countersink angle, 6-32 thread, ½ in long, undercut 1,100 EA Wave Disc Spring, High-Carbon Steel, 0.413" ID, 0.622" OD, 0.006 Thick, qty 30 packs 30 EA 1/8" Shoulder Diameter, 9/32" Shoulder Length, 4-40 Thread 180 EA 18-8 Stainless Steel Precision Shoulder Screw, 1/8" Shoulder Diameter, 11/16" Shoulder Length, 4-40 Thread 100 EA Black-Oxide 18-8 Stainless Steel Phillips Flat Head Screws, 82 Degree Countersink Angle, 4-40 Thread, 1/4" Long, Undercut 900 EA 316 Stainless Steel Washer, for Number 10 Screw Size, General Purpose, 0.203" ID 200 EA Low-Strength Steel Nylon-Insert Locknut, Thin-Profile, Zinc-Plated, 4-40 Thread Size 400 EA Black-Oxide Alloy Steel Hex Drive Flat Head Screw, 2- 56 Thread Size, 5/8" Long 200 EA Button Head Hex Drive Screw, Black-Oxide Alloy Steel, 4-40 Thread, 3/4" Long 400 EA Alloy Steel Shoulder Screw, 1/4" Shoulder Diameter, 1" Shoulder Length, 10-32 Thread 180 EA 18-8 Stainless Steel Nylon-Insert Locknut, 4-40 Thread Size 400 EA

Extended Amount

Black-Oxide 18-8 Stainless Steel Hex Drive Flat Head Screws, 6-32 Thread Size, 1/2" Long 200 EA Black Oxide 18-8 Stainless Steel Socket Head Screw, 4-40 Thread Size, 3/8" Long 400 EA

Compression Spring, 1" Long, 0.3" OD, 0.218" ID 96 EA Black-Oxide 18-8 Stainless Steel Phillips Flat Head Screws, 82 Degree Countersink Angle, 4-40 Thread, 1/2" Long 400 EA Black-Oxide 18-8 Stainless Steel Pan Head Phillips Screws, 6-32 Thread, 7/16" Long 1800 EA Linear Motion Shaft, 17-4 PH Stainless Steel, 1/8" Diameter, 6" Long 85 EA 18-8 Stainless Steel Shoulder Screw, with Passivated Finish, 3/8" Shoulder Diameter, 5/8"Shoulder Length 85 EA 18-8 Stainless Steel Shoulder Screw, with Passivated Finish, 3/8" Shoulder Diameter, 3/4"Shoulder Length 180 EA Male-Female Threaded Hex Standoff, 18-8 Stainless Steel, 3/16" Hex, 1/4" Long, 4-40 to 4-40 Thread 100 EA Black-Oxide 18-8 Stainless Steel Pan Head Phillios Screws, 6-32 Thread, 7/8" Long 200 EA 18-8 Stainless Steel Nylon-Insert Locknut, 2-56 Thread Size 400 EA 18-8 Stainless Steel Nylon-Insert Locknut, 5/16"-18 Thread Size 100 EA 18-8 Stainless Steel Unthreaded Spacer, 3/16" OD, 5/16" Long, for Number 4 Screw Size 100 EA 18-8 Stainless Steel Screw-to-Expand Insert for Plastic, 4-40 Thread Size 400 EA 18-8 Stainless Steel Screw-to-Expand Insert for Plastic, 6-32 Thread Size 450 EA 18-8 Stainless Steel Button Head Hex Drive Screw, 2- 56 Thread Size, 1" Long 275 EA 18-8 Stainless Steel Button Head Hex Drive Screw, 4- 40 Thread Size, 3/4" Long 100 EA 18-8 Stainless Steel Nylon-Insert Locknut, Black- Oxide, 6-32 Thread Size 400 EA Corrosion-Resistant Extension Spring Stud Anchor, 8- 32 Thread Size 180 EA Black-Oxide 18-8 Stainless Steel Phillips Flat Head Screws, 82 Degree Countersink Angle, 6-32 Thread, 3/8" Long 600 EA 18-8 Stainless Steel Washer, for Number 4 Screw, General Purpose, 0.125" ID, 0.312"OD 100 EA

Extended Amount

420 Stainless Steel Slotted Spring Pin, 1/8" Diameter, 1/2" Long 100 EA Medium-Strength Left-Hand Threaded Rod, Grade B7 Steel, 1/4"-20 Thread Size, 3 Feet Long 10 EA Button Head Hex Drive Screw, Black-Oxide Alloy Steel, 10-32 Thread, 3/8" Long 700 EA Button Head Hex Drive Screw, Black-Oxide Alloy Steel, 10-32 Thread, 1/2" Long 1150 EA Steel Left-Hand-Thread Thin-Profile Hex Nut, Medium-Strength, Zinc-Plated, 1/4"-20 Thread Size 100 EA Zinc-Plated Steel Press-Fit Nut for Sheet Metal, 10-32 Thread Size, for 0.056" Minimum Panel Thickness 900 EA 1050-1095 Spring Steel Slotted Spring Pin, 1/8" Diameter, 1-1/4" Long 250 EA Button Head Hex Drive Screw, Black-Oxide Alloy Steel, 6-32 Thread, 1/2" Long 200 EA Alloy Steel Cup-Point Set Screw, Black Oxide, 6-32 Thread, 1/8" Long 400 EA Low-Strength Steel Hex Nut, Zinc-Plated, 10-24 Thread Size 200 EA

Carbon Steel Cotter Pins, 3/32" Diameter, 3/4" Long 100 EA Low-Strength Steel Nylon-Insert Locknut, Zinc-Plated, 10-32 Thread Size 200 EA Black-Oxide Alloy Steel Socket Head Screw, 10-24 Thread Size, 5/8" Long 200 EA Torsion Spring, 180 Degree Left-Hand Wound, 0.404"

OD 90 EA

Torsion Spring, 120 Degree Angle, Left-Hand Wound, 0.281" OD 90 EA

Press-Fit Studs, Steel, 4-40 Thread, 1/2" Long, PEM Fh440-8 200 EA Zinc-Plated Steel Press-Fit Nut for Sheet Metal, 6-32 Thread Size, for 0.056" Minimum Panel Thickness 2000 EA Zinc-Plated Steel Press-Fit Nut for Sheet Metal, 8-32 Thread Size, for 0.056" Minimum Panel Thickness 400 EA Steel Extension Spring, with Loop Ends, 1.25" Long, 0.313" OD, 0.035" Wire Diameter 96 EA

Compression Spring, 1" Long, 0.36" OD, 0.258" ID 96 EA 1004-1045 Carbon Steel Clevis Pin, 3/16" Diameter, 7/16" Usable Length 100 EA 18-8 Stainless Steel Button Head Hex Drive Screws, Black-Oxide, 8-32 Thread Size, 3/8" Long 550 EA

Extended Amount

18-8 Stainless Steel Button Head Hex Drive Screws, Black-Oxide, 8-32 Thread Size, 5/8" Long 700 EA 1050-1095 Spring Steel Slotted Spring Pin, 1/16" Diameter, 1/4" Long 500 EA Permanently Lubricated Ball Bearing, Open, Trade Number R2, for 1/8" Shaft Diameter 85 EA Zinc-Plated Steel Split Rings, 1/4" OD, 1/8" ID, 3/64" Thick 200 EA Passivated 18-8 Stainless Steel Phillips Flat Head Screw, 82 Degree Countersink, 4-40 Thread, 1/2" Long, Undercut 500 EA Alloy Steel Shoulder Screw, 1/4" Shoulder Diameter, 3/4" Shoulder Length, 10-24 Thread 85 EA Low-Strength Steel Nylon-Insert Locknut, Thin-Profile, Black Corrosion-Resistant Coated, 10-24 size 450 EA Alloy Steel Flat-Tip Set Screws, Black Oxide, 4-40 Thread, 1/8" Long 100 EA Set Screw Shaft Collar, for 1/8" Diameter, Black-Oxide 1215 Carbon Steel 85 EA

Compression Spring, 0.75" Long, 0.24" OD, 0.196" ID 84 EA Black-Oxide Alloy Steel Socket Head Screw, 4-40 Thread Size, 5/16" Long 200 EA 1050-1095 Spring Steel Slotted Spring Pin, 3/32" Diameter, 1-1/8" Long 250 EA Black-Oxide 18-8 Stainless Steel Pan Head Phillips Screws, 4-40 Thread, 3/8" Long 300 EA Alloy Steel Cup-Point Set Screw, Black Oxide, 10-32 Thread, 1/8" Long 175 EA Alloy Steel Flat-Tip Set Screws, Black Oxide, 6-32 Thread, 3/16" Long 200 EA Alloy Steel Flat-Tip Set Screws, Black Oxide, 10-32 Thread, 1/4" Long 350 EA Side-Mount External Retaining Rings, for 1/4" OD, Black-Phosphate 1060-1090 Spring Steel 200 EA Oil-Filled 841 Bearing Bronze Rod, 3/8" Diameter, 3" Long 50 EA Black-Oxide 18-8 Stainless Steel Phillips Flat Head Screws, 82 Degree Countersink Angle, 8-32 Thread, 1/2" Long 300 EA

½ x 4 6061-T6511 EXT ALUM, 12 ft 11 EA ¼ x ½ UNS C36000 H02 CA360 Half-Hard FC Brass, 12 ft 1 EA

Extended Amount

½ x ¾ 360 brass ½ hard – H02, 12 ft 2 EA

1-1/2 RD 6061-T6511 EXT ALUM, 12 ft 3 EA

1-5/8 RD 6061-T6511 EXT ALUM, 12 ft 2 EA

2 RD 6061-T6511 EXT ALUM, 12 ft 1 EA ¾ x ¾ x 1/16 6063-T52 ALUM Sharp Corners Angle, 16 ft 3 EA 1-1/4 x 1-1/4 x 1/8 6063-T52 Sharp Corners Angle, 16 ft 2 EA

½ SQ A-36 HR Steel, 20 ft 1 EA

¾ x 1 6061-T6511 EXT ALUM, 12 ft 1 EA 1-1/2 x 3 6061-T6511 EXT ALUM Manifold Quality, 12 ft 15 EA 4 x 1.58 x 0.180 6061-T6 Alum American Standard Channel, 25 ft 2 EA ¼ 6061-T651 48.5 x 96.5, Aluminum Plate US/Canada Only, 48.5 in x 96.5 in 1 EA

¾ x 2 416 Stainless, 12 ft 4 EA

0.090 6061-T6 ALUM SHT 48 x 96, 48 in x 96 in 3 EA

0.125 5052-H32 ALUM 48 x 96 laser PVC 1 side, 48 in x 96 in 6 EA

2 SQ 6061-T6511 EXT ALUM Manifold Quality, 12 ft 2 EA ½ 6061-T651 48.5 x 96.5 Aluminum Plate, 48.5 in x

96.5 in 1 EA ½ x ¾ 316L Stainless Steel and Edged 11-13’ Random, 12 ft 4 EA

0.063 6061-T6 ALUM SHT 48 x 96, 48 in x 96 in 2 EA 11 GA CR Sheet 48 x 96 temper Pass A1008 CS Type B, 48 in x 96 in 2 EA 1-1/2 SCH 40 6063-T6 ALUM Pipe 1.90 OD 0.145 Wall, 20 ft 3 EA

3/16 Acrylic BLK 48 x 96 #2025 Black, 48 in x 96 in 1 EA

TOTAL $_________

5. Is the pricing offered GSA or Open Market?_____________________

6. This request for information (RFI) is strictly voluntary and is not to be interpreted as a quote in anticipation of a future contract award.

7. All questions and responses to these sources sought/ market research must be submitted in wiriting to Khalilah Canada-Zerquera (khalilah.canada-zerquera@us.af.mil). Responses shall be submitted in MS Word or Adobe PDF format not later than 27 February 2026 12:00 pm eastern.

8. Respondents will not be notified of the results of the information. However, the Contracting Officer will utilize the information for technical and acquisition planning. All proprietary information not to be disseminated in Government documents must be clearly identified. Since this is a sources sought announcement only, no evaluation letters and/or results will be issued to the participants. This market survey is issued to determine the applicable planning and acquisition strategy based on responses indicating capability in responding to this requirement.