RFI FD2060-23-00052.pdf

REQUEST FOR INFORMATION

C-5 Valve Assembly

The Government is conducting market research to identify potential sources that possess the repair data, expertise, capabilities, and experience to meet qualification requirements to manufacture the C-5 Valve Assembly. The National Stock Number (NSN) and Part Number (PN) are as follows:

Item NSN PN Valve Assembly 4820-00-437-4802UC 93391-5

The AMC/ AMSC code for the Valve Assembly is 3/R. The technical data required to manufacture the Valve Assembly is not owned by the Government, and is uneconomical to acquire the data by purchase or to reverse engineer the item. No samples are available for potential suppliers to evaluate.

Contractor shall furnish all material, support equipment, tools, test equipment, and services. The contractor is responsible for providing, maintaining, and calibrating all support equipment required at their facility or a subcontractor’s facility. Contractor furnished material or parts used for replacement shall equal or exceed the quality of the original material or parts.

Parker Hannifin Corporation is the manufacturer of the Valve Assembly and the known sole source contractor for acquisition of this item. Contractors/Institutions responding to this market research are placed on notice that participation in this survey may not ensure participation in future solicitations or contract awards. The government will not reimburse participants for any expenses associated with their participation in this survey.

FAR 52.215-3, Request for Information or Solicitation for Planning Purposes (Oct 1997) applies to this request for proposal:

(a) The Government does not intend to award a contract on the basis of this request or to otherwise pay for the information solicited except as provided in subsection 31.205-18 Bid and Proposal (B&P) Costs, of Federal Acquisition Regulation

(b) Although "proposal" and "offeror" are used in this Request for Information, your response will be treated as information only. It shall not be used as a proposal.

(c) This solicitation is issued for the purpose of: informational planning and budgetary forecasting by the government.

INSTRUCTIONS:

1. The information below contain a description of the Valve Assembly requirements and a Contractor Capability Survey. The Survey allows Contractors to provide their company’s capability.

2. If, after reviewing this information, you desire to participate in the market research, you should provide documentation that supports your company’s capability in meeting these requirements. Failure to provide documentation may result in the government being unable to adequately assess your capabilities. If you lack sufficient experience in a particular area, please provide details explaining how you would overcome the lack of experience/capabilities in order to perform that portion of the requirement (i.e., teaming, subcontracting, etc.)

a. Identify any areas of work that your organization believes should be broken out exclusively for Small Business.

3. Both large and small businesses are encouraged to participate in this Market Research.

Joint ventures or teaming arrangements are encouraged.

4. Questions relative to this market survey should be addressed to Nathan Bissette, Logistics Manager at nathan.bissette@us.af.mil.

PURPOSE/DESCRIPTION

The Government is conducting market research to identify potential sources that possess the expertise, capabilities, and experience to meet qualification requirements to provide the manufacture of the C-5 Valve Assembly. The National Stock Numbers (NSN) and Part Numbers (PN) are as follows:

Item NSN PN Valve Assembly 4820-00-437-4802UC 93391-5

Description: This part is used on the outboard elevator assembly. The valve regulates the amount of hydraulic pressure that is used on the actuators to control the outboard elevator.

Purpose: The purpose of the Shutoff and Bypass Valve in the normal position is to permit flow of system fluid to a servo valve. In the shutoff position, it blocks inlet pressure and flow to the servo valve and interconnects each side of an actuator to system return.

mailto:nathan.bissette@us.af.mil

The Government does not own the data or the rights to the data needed to compete the manufacture of this part. It has been determined to be uneconomical to reverse engineer the data, qualify a new source, or buy the data and/or data rights. Parker Hannifin is the only source of known manufacture for this system and has been since it was fielded.

CONTRACTOR CAPABILITY SURVEY

Part I. Business Information

Please provide the following business information for your company/institution and for any teaming or joint venture partners:

• Company/Institute Name:

• Address:

• Point of Contact:

• CAGE Code:

• Phone Number:

• E-mail Address:

• Web Page URL:

• Size of business pursuant to North American Industry Classification System (NAICS) Code:

NAICS Code 336413 – Other Aircraft Parts and Auxiliary Equipment

Based on the above NAICS Code, state whether your company is:

• Small Business (Yes / No)

• Woman Owned Small Business (Yes / No)

• Small Disadvantaged Business (Yes / No)

• 8(a) Certified (Yes / No)

• HUBZone Certified (Yes / No)

• Veteran Owned Small Business (Yes / No)

• Service Disabled Veteran Small Business (Yes / No)

• Central Contractor Registration (CCR). (Yes / No)

• A statement as to whether your company is domestically or foreign owned (if foreign, please indicate the country of ownership).

Responses to the Capability Survey Part I and Part II must be received no later than close of business 25 May 2022. Please ensure data is in a readable electronic format that can be received through a firewall. Attachments shall not to exceed 10 MB per email. Multiple emails are acceptable. Responses must be sent via email to the following:

nathan.bissette@us.af.mil tabatha.mcrae_cooper@us.af.mil

Questions relative to this market research should be addressed to PCO.

Part II. Capability Survey Questions

A. General Capability Questions:

1. Describe briefly the capabilities of your facility and nature of the goods and/or services you provide. Include a description of your staff composition and management structure.

2. Describe your company's past experience on previous projects similar in complexity to this requirement. Include contract numbers, a brief description of the work performed, period of performance, and agency/organization supported.

3. Describe your company’s experience in repairing the C-5 Valve Assembly

4. Describe your company's capabilities for generating, handling, processing and storing classified material and data.

5. What is your company’s current maximum capacity per month for this particular type of requirement? Provide information on any facility reserves you may possess to increase capacity in the event of an immediate need do to critical operational mission requirements.

B. Manufacturing Questions

1. Describe your capabilities and experience in manufacturing with regard to the requirements of this effort.

2. Describe your capabilities and experience in developing/modifying manufacturing procedures. Include associated upgrade of technical orders and preparation of new technical orders.

3. Demonstrate your ability and experience in the manufacture of the same or similar components, which are currently utilized in the commercial or military environment by providing the following information on the same or similar items:

a) Contract Number

b) Procuring Agency

c) Contract Value

d) Number of assets shipped

4. Provide your commercial manual(s) or Acceptance Test Procedures (ATP) and your rights to these manuals and or ATP used in the manufacture and functional check of these or similar assets for Government Engineer review.

5. Describe your capabilities and experience in test, evaluation, and repair processes/procedures with regard to manufacturing items.

6. Describe your configuration management processes and how you identify and resolve parts obsolescence and diminishing manufacturing sources problems?

7. Discuss your process for addressing any fit, form, and or function issues that may arise out of the requirements of this effort.

8. Describe your process for maintaining inventory records and reporting on hand/work-in-process balance and manufacturing status to your customer.

9. Include a detailed listing of facilities and equipment, including quantities, required to satisfy the requirements of this effort.

a. Provide an outline of the proposed process, including inspections.

i. State the type of test procedures are anticipated for this effort.

ii. State the type of inspection processes anticipated for this effort.

1. NDI/T.

2. Destructive testing/inspection.

10. How will your organization address the absence of drawings, specifications, technical data, test procedures, etc.

11. If the item cannot be manufactured in total, state what your organization can produce.

12. State any technology insertion ideas for the item that would be suitable for this effort.

13. Discuss any reverse engineering or item replacement opportunities that may be present.