RFI CRIB FA8629-25-R-5036.pdf

DEPARTMENT OF THE AIR FORCE

AIR FORCE LIFE CYCLE MANAGEMENT CENTER

WRIGHT-PATTERSON AIR FORCE BASE

25 Oct, 2024

Tracking No. FA8629-25-R-5036

MEMORANDUM FOR: All Qualified Vendors with SAM.gov Access

FROM: AFLCMC/WISK

Special Warfare Contracting Office 1895 Fifth Street Wright Patterson AFB, OH 45433-7200

SUBJECT: Request for Information (RFI) – Systems to deploy Combat Ready Insertion Barrel

1. NOTICE

This Sources Sought Synopsis (SSS)/Request for Information (RFI) is issued for informational purposes and market research only; it does not constitute a solicitation. The Government will not reimburse any company or individual for any expenses associated with preparing/submitting information in response to this posting. The information provided may be used by the Government in developing its acquisition strategy, statement of work/statement of objectives, and/or performance specifications. Interested parties are responsible for adequately marking proprietary or competition sensitive information contained within their response as instructed later in this posting.

2. BACKGROUND AND SCOPE

The United States (US) Air Force Life Cycle Management Center (AFLCMC), Intelligence, Surveillance and Reconnaissance & Special Operations Forces (ISR & SOF) Directorate, Special Warfare (SW) Program Office (AFLCMC/WISN) is conducting market research to identify systems capable of providing a Combat Ready Insertion Barrel (CRIB), a modular air delivery solution capable of packing mission equipment within a robust containment system. This capability will ensure safe and stable flight for mission equipment during freefall operations.

3. CAPABILITY

Air Force Special Warfare units require a standardized airdrop method to deliver personnel and sensitive equipment over land and water environments.

Key Performance Parameters (KPPs)

1.1 KPP: CRIB will be designed to airdrop any payload including a complete inflatable watercraft, including engine, fuel, and inflation system enclosed in one delivery.

1.2 KPP: CRIB will be deployed in multiple air delivery configurations, such as tethered tandem, conventional, or guided parachute systems.

1.3 KPP: CRIB system will be water & dust tight.

1.4 KPP: CRIB system includes customizable wheeled frame.

1.5 KPP: CRIB will be positively buoyant with full load.

Key System Attributes (KSAs)

2.1 KSA: Modular (replaceable parts, strapping system, main body, base cap, wheels).

2.2 KSA: CRIB System includes capable of delivering 550lbs payload up to 1000lbs.

2.3 KSA: CRIB System will be a robust containment system made of protective properties to ensure safe deployment of military equipment.

2.4 KSA: CRIB Components Material will be resistant to the deteriorating effects of sea water.

2.5 KSA: CRIB Components Material will be Chemical (Gasoline) Resistant.

2.6 KSA: CRIB Components Material will be Flame resistant.

2.7 KSA: CRIB Components Material will be impact and puncture resistant.

2.8 KSA: CRIB will be rated for 20 live drops to 40 live drops.

2.9 KSA: CRIB main components will be color configurable.

2.10 KSA: CRIB Strapping system rated at 10-1 safety factor for load rating.

2.11 KSA: CRIB should be able to be de-rigged in open water.

2.12 KSA: CRIB should be able to be employed w/ current Military Tandem Tethered Bundle systems.

2.13 KSA: CRIB should be able to be employed w/ current cargo parachute systems.

2.14 KSA: CRIB should be able to be employed w/ current aerial insertion platforms.

2.15 KSA: CRIB should allow for scaled, measured weights to be added to stabilize flight.

2.16 KSA: CRIB will have multi-drop configurable harness system.

DoD Customer history What systems have been sold to Department of Defense Customers? Do you have any active contracts for purchase of these systems within DoD?

4. INSTRUCTION TO POTENTIAL RESPONDENTS

Interested parties who desire to participate in this SSS/RFI are encouraged to submit responses that demonstrate they presently have the technology and qualifications to provide the system described above. Responses shall also include the following information:

a. Respondent Data:

Company/Institute Name Address Point of Contact (to include phone number and email address) CAGE Code Web Page URL

Suggested NAICS Code 336413 Other Aircraft Parts and Auxiliary Equipment Manufacturing, if you have a different solution under a different NAICS please provide your suggested NAICS along with a justification.

State whether the company is:

Small Business (Yes / No) Self-Certified or Third Party Certified Women-Owned Small Business (Yes / No) Self-Certified or Third Party Certified Economically Disadvantaged Women- Owned Small Business (Yes / No) Self-Certified or Third Party Certified HUBZone Certified (Yes / No) Self-Certified or Third Party Certified Veteran Owned Small Business (Yes / No) Self-Certified or Third Party Certified Service Disabled Veteran Owned

Small Business (Yes / No) Self-Certified or Third Party Certified 8(a) Certified (Yes / No) Self-Certified or Third Party Certified SBA Certification Date: SBA Graduation Date:

State whether the company is domestically or foreign-owned (if foreign, indicate the country of ownership).

State whether the respondent is interested in being a prime or subcontractor for this requirement.

b. Describe the capability of your product or products and provide product information and specifications. Additionally, describe the capability of your product(s) to meet the desired performance requirements listed below. If you are proposing development to integrate existing or new subsystems, clearly describe your approach.

c. Responses may include but are not limited to:

1) Pictures

2) Drawings

3) Associations or connectivity with other end items/systems

4) Test results to support meeting threshold and objective requirements

5) Ability to deliver systems within 6 months after receipt of order

d. Rough cost estimate (i.e. rough order of magnitude (ROM)) based on an optimum or varied pricing quantities (this is for Government budget planning purposes and will not be considered a bid or binding in any manner).

e. Indicate whether the company is currently performing this type of work/whether the capability can be obtained under an existing Government contract. Provide the contract number(s) and Government points of contact accordingly.

f. Please include product warranty terms as applicable, along with any warranty limitations. If product warranty terms are not applicable, please include N/A.

g. Include any spare parts that would potentially be included.

h. Provide the details of NET training including process and cost.

i. Describe any possible product improvements that could be made or are planned for the future for the solution.

j. Describe any risks associated with the fulfillment of this projected requirement. This can include technical or schedule risks associated with development, key performance parameters, etc.

k. Please provide specific details and rationale as to how compliance with FAR 52.219-14, Limitations on Subcontracting, and FAR 52.219-33, Non-Manufacturer Rule, would be achieved in the event the Government sets this requirement aside for small business. Include specific details regarding teaming arrangements, etc. If subcontracts are to be used, provide the anticipated percentage of effort to be subcontracted and whether small or large businesses, including foreign, will be used. If this effort is not set-aside for small business, small business utilization will be considered. Large and small businesses should provide a reasonable expectation for small business utilization as a percent of total contract value as well as supporting rationale for the recommended percentage.

5. RESPONSES, COMMUNICATIONS, AND ADDITIONAL CONSIDERATIONS:

a. The Government may contact respondents to obtain additional information or clarification in order to fully understand a company's response. This may include discussions, site visits, demonstrations, etc. to further the Government's understanding of a proposed solution, as well as a company's understanding of the Government's requirements.

b. Responses shall not exceed 15 pages (including cover page). Include technical and descriptive text and photographs/illustrations to provide sufficient detail. The submitted documentation becomes the property of the United States Government and will not be returned.

c. Respondents shall clearly mark proprietary data with the appropriate markings. Any proprietary information received in response to this request will be properly protected from any unauthorized disclosure. Any material that is not marked will be considered publicly-releasable.

d. Government-contracted contractor support personnel may handle proprietary data submitted in response to this RFI. These support personnel will have signed the same Non-Disclosure

Agreements (NDAs) as Government personnel.

e. If you are currently providing your proposed capability on an existing government contract, please identify the contract and a government POC.

f. Broad industry participation for this RFI is encouraged. U.S. and non-U.S. firms are permitted to respond.

g. Please note that prospective contractors must be registered in the System for Award Management (SAM) database to be awarded a DOD contract; the NAICS code for this requirement, if applicable to the company’s capabilities, should be included in the company’s NAICS code listing in SAM. To learn more about this SAM requirement and how to register, please visit the SAM website at: https://www.sam.gov/portal/SAM

h. Responses are due electronically by 12:00PM Eastern time on 22 November 2024 via email to:

Joe Evans

AFLCMC/WISK

Contracting Officer joseph.evans.27@us.af.mil

Beckett Andersen, 1LT

AFLCMC/WISN

Program Manager beckett.andersen.1@us.af.mil

Jarrett Sainz, Capt

AFLCMC/WISN

Program Manager jarrett.sainz@us.af.mil

i. This notice may be updated as additional information becomes available. Questions regarding this announcement shall be submitted in writing by email to the Contracting Officer identified above, with the other individuals identified above copied as a courtesy.

This is a Request for Information (RFI) only to identify potential sources for the solution. The information provided in the RFI is subject to change and is not binding on the Government. The Government has not made a commitment to procure any of the items discussed, and release of this RFI should not be construed as creating such a commitment or as an authorization to incur cost for which reimbursement would be required or sought.

Joe Evans Contracting Officer

AFLCMC/WISK

https://www.sam.gov/portal/SAM mailto:joseph.evans.27@us.af.mil mailto:beckett.andersen.1@us.af.mil mailto:deena.plamondon@us.af.mil