RFI 36C26226Q1244 HEMODYNAMIC MONITOR.pdf

Sources Sought Notice

*= Required Field Sources Sought Notice

SUBJECT* HEMODYNAMIC MONITOR

GENERAL INFORMATION

CONTRACTING OFFICE’S ZIP CODE* 90815

SOLICITATION NUMBER* 36C26226Q1244

RESPONSE DATE/TIME/ZONE 07-28-2026 4PM PACIFIC TIME, LOS ANGELES, USA

ARCHIVE 30 DAYS AFTER THE RESPONSE DATE

RECOVERY ACT FUNDS N

SET-ASIDE

PRODUCT SERVICE CODE* 6515

NAICS CODE* 339112

CONTRACTING OFFICE ADDRESS Department of Veterans Affairs

Network Contracting Office 22 4811 Airport Plaza Drive Suite 600 Long Beach CA 90815

POINT OF CONTACT*

CONTRACTING OFFICER

DEBBY ABRAHAM

DEBBY.ABRAHAM@VA.GOV

PLACE OF PERFORMANCE

ADDRESS VA San Diego Healthcare System 3350 La Jolla Village Drive

San Diego CA

POSTAL CODE 92161

COUNTRY

THIS REQUEST FOR INFORMATION (RFI) / SOURCES SOUGHT NOTICE IS ISSUED

SOLELY FOR INFORMATION AND PLANNING PURPOSES. THIS IS NOT A

SOLICITATION.

SUBMISSION OF INFORMATION ABOUT PRICING, DELIVERY, THE MARKET, AND

CAPABILITIES IS HIGHLY ENCOURAGED AND ALLOWED UNDER THIS RFI FOR

PLANNING PURPOSES IN ACCORDANCE WITH (IAW) FAR 15.201(e).

DISCLAIMER

This RFI is issued solely for information and planning purposes and does not constitute a solicitation. All information received in response to this RFI that is marked as proprietary will be handled accordingly. IAW FAR 15.201(e), responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. Responders are solely responsible for all expenses associated with responding to this RFI.

SOURCES SOUGHT/RFI DESCRIPTION

This is NOT a solicitation announcement. This is a Sources Sought Notice / RFI only. The purpose of this Sources Sought Notice / RFI is to gain information about potential qualified sources and their size classification relative to NAICS 339112 (size standard of 1,000

Employees). Responses to this Sources Sought Notice / RFI will be used by the Government to make appropriate acquisition decisions. After review of the responses to this Sources Sought

Notice / RFI, further RFIs and/or a solicitation or other announcements may be published.

The Department of Veterans Affairs (VA) is seeking sources capable of providing Hemodynamic

Monitors that can address the attached list of DRAFT requirements for multiple VA San Diego.

The list of DRAFT characteristics is intended to be descriptive, not restrictive, of the supplies/services that are required.

BRAND NAME/PART #

Kit, LiDCO Hemodynamic Monitor/# 99026

Kit, O3 Regional Oximeter, Masimo/# 9637

Kit, Radical-7 Color Screen Handheld/#9500

Kit, Root, Masimo/# 9513

LiDCO to Edwards, BP Module Cable, 1/Box/# 5121

LiDCO to Philips, Analog Cable, 1/Box/# 5127

PLETH VARI INDEX, FIXED TERM LICENSE/#2635

RD RNBW SET MD20-12,Patient CB,12FT,1/BX/#4073

Root Roll Stand with Quick Connect/#300238

TOTAL (SpHB) & OXYGEN (SpOC), FIXED TERM/#2633

EQUAL TO PRODUCT

HEMODYNAMIC MONITOR

HEMODYNAMIC MONITOR SALIENT CHARACTERISTICS

Must use existing arterial lines or non-invasive finger cuffs (dual finger cuffs) for monitoring.

Must measures blood pressure and calculates CO, SV, SVR, Stroke Volume Variation (SVV), and Pulse Pressure Variation (PPV).

Must utilizes PulseCO softwave for pulse contour analysis to provide real-time data, often calibrated using Lithium Dilution (LiDCOplus) for accuracy.

Must be suitable for hemodynamically unstable patients in operating rooms and ICUs.

Must feature an intuitive display with a 3-hour battery life

Must provides both continuous monitoring (via arterial line) and quick, intermittent, accurate readings

If your company is interested and capable of providing the required supplies/services, please provide the information indicated below. Response to this notice should include company name, address, point of contact, size of business pursuant to the following questions:

(1) Submit your capabilities statement illustrating how your organization can/cannot meet the list of DRAFT/SALIENT CHARACTERISTICS/SOW requirements. For instances where your company cannot meet the DRAFT/SALIENT CHARACTERISTICS/SOW requirement(s), please explain. For instances where your company can meet the

DRAFT/SALIENT CHARACTERISTICS/SOW requirement(s), please show how your company meets/exceeds each requirement.

(2) Please review the list of DRAFT/SALIENT CHARACTERISTICS/SOW requirements and provide any additional feedback or suggestions. If none, please reply as N/A.

(3) Please indicate the size status and representations of your business, such as but not limited to: Service-Disabled Veteran-Owned Small Business (SDVOSB), Veteran-Owned

Small Business (VOSB), HUBZone, Woman Owned Small Business (WOSB), Large

Business, etc.

(4) Is your company considered small under the NAICS code identified in this RFI?

(5) Are you the manufacturer, authorized distributor, and/or can your company provide a solution to the required supplies/services described in the list of DRAFT/SALIENT

CHARACTERISTICS/SOW?

(6) If you are a large business, do you have any designated/authorized distributors? If so, please provide their company name, telephone, point of contact and size status (if available).

(7) If you’re a small business and you are an authorized distributor/reseller for the items identified above, do you alter; assemble; modify; the items requested in any way? If you do, state how and what is altered; assembled; modified.

(8) Limitations on Subcontracting: How does your business ensure compliance with the limitations on subcontracting as outlined in 13 CFR § 125.6?

(9) Are the items you are identifying/providing considered Commercial of the Shelf

(COTS) items as defined in FAR Part 2.101 under commercial items?

(10) Non-Manufacturer Rule: If applicable, can you confirm your business complies with the Non-Manufacturer rule? Specifically, does your company: Provide a product from a small business manufacturer or processor? Not exceed 500 employees? Primarily engage in the retail or wholesale trade and normally sell the type of item being supplied?

Take ownership or possession of the item(s) with its personnel, equipment or facilities in a manner consistent with industry practice?

(11) What is your lead time to deliver a single unit with all components? Is there scale in lead time with greater quantities? Please elaborate.

(12) What is estimated life span of your solution? What support/services does that entail?

(13) Does your proposed equipment have FDA clearance? Please specify what FDA clearance(s) have been obtained.

(14) Does your organization offer a leasing solution? Please elaborate.

(15) Does your company have a Federal Supply Schedule (FSS)

GSA/NAC/SAC/BPA/NASA SEWP or any other Federal Government contract? If so, please provide the contract number(s).

(16) If you are an FSS GSA/NAC/SAC/BPA/NASA SEWP or any other Federal Government contract holder, are all the items/solutions you are providing information about available on your schedule/contract? Please state if all or some items are available on the contract.

(17) General pricing of your products/solution is encouraged. Pricing will be used for the purpose of market research only. It will not be used to evaluate for any type of award.

(18) Please provide your SAM.gov Unique Entity ID/Cage Code number.

Buy America Compliance

Respondents shall provide sufficient detail to determine compliance with the Buy

American Act, including country of origin, domestic content, and availability of domestic alternatives. Responses should be complete and supported with verifiable information.

1. Please identify the country of origin for the end product(s) being offered. Include the location of final assembly/manufacture.

2. Please provide the percentage of domestic content (by cost) for each product(s).

Describe the origin of the major components.

3. Does your product qualify as a “domestic end product” in accordance with the

Buy American Act?

4. If the proposed product is not compliant, are you able to provide a BAA-compliant domestic alternative?

5. Please identify the manufacturer name and location for the product(s). Confirm whether the manufacturer is U.S.-based.

6. Identify the country of origin of each product and indicate whether the product qualifies as a U.S.-made or designated-country end product in accordance with the Trade Agreements Act

Responses to this notice shall be submitted via email to Debby.Abraham@va.gov. Telephone responses will not be accepted. Responses must be received no later than Tuesday, July 28, 2026 by 4:00 PM PST.

All responses to this Sources Sought/RFI will be used for planning purposes only. Responses to this Sources Sought Notice / RFI are not considered a request to be added to a prospective bidders list or to receive a copy of the solicitation. If further RFIs and/or a solicitation or other announcement is issued as a result of the information provided from this RFI, all interested parties must respond to the specific posting separately IAW the specifications of that announcement.