Revised 07220 ATT 2 FID AFH Camp Zama Bldg 671 Appliances.pdf

UH Army Furnishings Program – Furniture Item Descriptions (FID) AFH, Camp Zama, Bldg 671, Appliances

Revised 7-2-20

Attachment 2 Page 1 of 6

Attachment #2

Furniture Item Descriptions (FID)

Army Family Housing

Attachment 2 Page 2 of 6

TABLE OF CONTENTS PAGE NO.

1. GENERAL

2.-7. NOT USED

8. APPLIANCES

Attachment 2 Page 3 of 6

1. GENERAL

1.1.-1.3. Not Used.

1.4 Electrical.

Unless noted otherwise in FID, all electrical requirements shall meet the following:

a. Washing Machine, Dryer, and Lamp: 100V/50Hz

b. 30” Range: 220-240V/50 Hz

c. 20” Gas Range: 100-120V/60 Hz

Electrical convertors shall not be acceptable.

a. All Washing Machine and Dryer plugs should be non-polarized type-A.

b. 30” Range and 20” Gas Range plugs are in photographs below.

Type A plug 20” Gas Range Plug 30” Range Plug

1.5 Cut Sheets.

Cut sheets are required for this RFQ. All required items and features submitted shall be on a current GSA schedule contract with the exception of UNICOR Products. A copy of the current GSA scheduled pricing shall be submitted along with the cut sheets for this RFQ. Items shall conform to the following requirements in order to be considered acceptable for this RFQ:

a. Cut sheets shall be legible with highlighted model numbers, dimensions, warranty information, and all salient features required in the FID.

b. All cutsheets shall be provided in 1-3 searchable PDF documents or other applicable software and be assembled and labeled in numerical order based on the FID section number, ex.: 2.1 Mattress, 3.1 Bed, etc.

Attachment 2 Page 4 of 6

c. Label each PDF with the pages contained within, ex.: Vendor’s cutsheets pgs. 1-10, Vendor’s cutsheets pgs. 11-25, etc.

d. Cut sheet shall include color photographs of all fabric selections being submitted for approval. Include fabric content, flame resistance, and abrasion resistance testing.

e. Cut sheets shall include line drawings or images that address all required features.

f. Cut sheets shall clearly state name brand, model numbers, and GSA schedule contract numbers for all items quoted.

g. Cut sheets shall clearly state all required features that have been provided. List all of the features if printed literature is not available. The features may be handwritten on the cut sheet with the name, phone number, and company of the person who is providing the information.

h. Cut sheets which have more than one model, size, type, or which show statement of line options shall be clearly marked to show the model, size, type, and all salient features proposed.

i. PDFs created using scanned documents shall use text recognition (i.e. OCR) to ensure search functions are enabled.

2.-7. NOT USED

8. APPLIANCES

Manufacturer’s warranty shall be provided. Contractor shall verify onsite that clearances are adequate for appliances.

8.1 Not Used.

8.2 30” Range.

• Multistar MER30220EUW, or equal.

a. Shall be 30"W x 25-29"D x 37-48”H.

b. Shall be electric.

c. Shall be free-standing.

d. Shall have smooth glass cook top surface.

e. Shall have a minimum capacity of 4.0 cu.ft.

f. Provide digital temperature display.

g. Oven shall have:

i. Bake and broil elements

ii. 2 Removable racks with a minimum of 4 rack positions

h. Range top shall have two 6" and two 8" burners.

i. Provide removable storage drawer.

j. Color shall be white.

Attachment 2 Page 5 of 6

k. Provide 3 wire cord.

l. Provide minimum 1 year warranty for parts and labor.

8.3 20” Gas Range.

• GE - Hotpoint RGAS200DMWW, Summit - RG200WS, or equal.

a. Shall be 20”W x 23-27”D x 40-43”H.

b. Shall be gas.

c. Shall be freestanding.

d. Shall be electric ignition.

e. Oven shall have:

i. Bake and broil elements

ii. 2 Removable racks with a minimum of 4 rack positions

iii. Minimum capacity of 2.0 cu.ft.

f. Range top shall have 4 burners.

g. Provide removable storage drawer.

h. Color shall be white.

i. Provide 3 wire cord.

j. Provide conversion kit for LP gas.

k. Provide connectors, hoses, vents, etc. for a fully functioning unit.

l. Provide minimum 1 year warranty for parts and labor.

8.4 Washing Machine.

• Toshiba AW-8D8, Sharp ES-PW8D, Hitachi BW-DV80E, or equal

a. Shall be 22-25”W x 22-26”D x 38-42”H.

c. Shall be Japanese model washing machine.

d. Shall have a both washing and drying features.

e. Shall have minimum washing capacity of 8 KG.

f. Shall have minimum drying capacity of 3 KG.

g. Shall have minimum of 4 washing functions.

h. Shall have water or weight and temperature sensor.

i. Shall have a stainless steel tank.

j. Shall have a function to deodorize, sanitize or clean the tank.

k. Shall be same manufacturer and style as clothes dryer provided.

l. Provide 3 wire cord 2 wire cord.

m. Provide all supply hoses, drain lines, connectors, etc. for a functional unit.

n. Color shall be white.

o. Provide minimum 1 year warranty on parts and labor.

Attachment 2 Page 6 of 6

8.5 Clothes Dryer.

• Hitachi, DE-N60WV, Sharp KD-60C, Toshiba ED-60C-W, or equal

a. Shall be 24-26”W x 20-22”D x 22-27”H.

c. Shall be Japanese model clothes dryer.

d. Shall have minimum drying capacity of 6 KG.

e. Shall be front loading.

f. Shall have minimum of 2 drying functions.

g. Shall have humidity sensor.

h. Shall have lint filter.

i. Provide all connectors, vent kits, etc. for a functional unit.

j. Shall be same manufacturer and style as washing machine provided.

k. Shall be able to stack over washing machine.

l. Provide 3 wire cord 2 wire cord.

m. Color shall be white.

n. Provide minimum 1 year warranty on parts and labor.

8.6 Clothes Dryer Stand, Direct Attached

• Toshiba - DS-D1, Hitachi DES-P32-S, or equal.

a. Shall be 18-25” W x 24-30” H x 17-20”D.

b. Shall be Japanese model clothes dryer stand.

c. Shall be same manufacturer as washing machine and clothes dryer provided.

d. Shall be direct attached.

e. Shall be used with the clothes dryer to stack over washing machine.

f. Shall be made of metal.

g. Shall be height and width adjustable.

h. Shall come with all hardware necessary to install.

i. Color shall be white.

END OF SECTION