Requirements - Skid Steer Mower Attachment.docx
DOCX document 15 KB Posted
- Attached to
- MBRNF Skid Steer Mower Arm Attachment Federal contract opportunity
- Solicitation number
- 1240LP24Q0081
- Issued by
- Department of Agriculture Forest Service
About this file
This document contains requirements for a hydraulically controlled swing arm mower attachment for a skid steer, as part of a federal contract opportunity from the Department of Agriculture Forest Service. The mower attachment must be capable of 90-degree horizontal swing, have a nominal reach of 96 inches (+/- 8 inches) and cut width of 44 inches (+/- 6 inches), and pivot vertically 125 degrees (+/- 10 degrees). The mower shall have replaceable, wear-resistant steel cutters that can pivot or break away when contacting hard objects. The hydraulic motor must be sized for the specified CAT 259B3 skid steer's hydraulic flow, pressure, and power. The attachment is required for roadside brushing and vegetation clearing, with a shipping location of the US Forest Service in Laramie, Wyoming.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| 1240LP24Q0081 Mower Arm Attachment Solicitation.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Requirements for Skid Steer Mower Attachment April 2024
The following requirements shall be met to provide a hydraulicly controlled swing arm mower attachment for skid steer. The unit will be used for roadside brushing to include mowing grass, small trees, and tree branches to clear vegetation from the road shoulder and ditch.
· The mower attachment shall be equipped to attach to a CAT 259B3 Skid Steer
· The mower attachment shall have the capability to swing 90 degrees horizontally from the center line of the skid steer (straight forward to right side of skid steer)
· Nominal Reach (center of arm pivot to center of cutter shaft/driven motor): 96” (+/- 8”)
· Nominal Cut Width: 44” (+/- 6”)
· The mower deck shall have the capability to pivot vertically at the end of the swing arm.
· Pivot angle between swing arm and deck: 125 degrees from vertical (+/- 10 degrees)
· The mower shall have cutters that have the capability to pivot or break away when hard objects are contacted.
· The cutters shall be replaceable.
· The cutters shall be constructed of steel with high tensile strength, hardness, abrasion and wear-resistant properties.
· The hydraulic motor on the mower shall be sized for the appropriate pressure and flow rates of the specified skid steer.
· The option for a hydraulic motor that requires the need of a case drain is acceptable.
Skid Steer Hydraulic Specifications: (CAT 259B3)
· Loader Hydraulic Flow: 22 gal/min
· Loader Hydraulic Pressure: 3,335 psi
· Hydraulic Power: 42.8 hp Shipping Location:
US Forest Service, MBRTB 2468 Jackson Street Laramie, WY 82070
File details come from the government source that posted it. Updated .