Request for Information (W80RA6-11-25C).pdf

Request for Information

THIS IS A REQUEST FOR INFORMATION (RFI) ONLY – This RFI is issued solely for information and planning purposes – it does not constitute a Request for Proposal (RFP) or a promise to issue an RFP in the future.

Solicitations are not available at this time. Requests for a solicitation will not receive a response. This notice does not constitute a commitment by the United States Government to contract for any supply or service whatsoever. All information submitted in response to this announcement is voluntary; the United States Government will not pay for information requested nor will it compensate any respondent for any cost incurred in developing information provided to the United States Government. Not responding to this RFI does not preclude participation in any future RFP, if any is issued. If a solicitation is released, it will be synopsized on SAM.GOV. It is the responsibility of the potential offerors to monitor this site for additional information pertaining to this requirement.

1. Agency: U.S. Army Contracting Command-Redstone in support of the U.S Army Test, Measurement, and Diagnostic Equipment Activity (USATA) is conducting market research to obtain capability information in support of U.S. Army Test, Measurement, and Diagnostic Equipment Activity (USATA) in accordance with FAR 15.201(e).

2. Contracting Office Address: Army Contracting Command, Army Contracting Center- Redstone Office:

CCAM-CAD-B

3. Notice Type: Special Notice

4. Reference Number: PANRSA-25-P-0000-011136

5. Title: Automated Force Calibration

6. Classification Code: 6640 Laboratory Equipment and Supplies

7. NAICS Code: 334516 Analytical Laboratory Instrument Manufacturing

8. Response Date: 21 April 2025

9. Primary Points of Contact: Lisa Armes, Contracting Officer at lisa.s.armes.civ@army.mil & Taylor Siskoff, Contract Specialist at taylor.c.siskoff.civ@army.mil

10. Description: The US Army Contracting Command-Redstone, Operations, Services, & Training Division, plans to obtain information to serve as market research to help identify potential sources that can provide a brand name purchase of one (1) UCM-200K Automated Calibration Machine with accessories that will include the following:

(1) Jack Compression Block

(1) Upper Yoke compression Block

(1) Lower Yoke Compression Block

(1) Upper Platen Compression Block

(1) Automation Control Unit

4215-PLUS

Morehouse 4215-Plus..• Single strain gage type input channel..• Peak / valley / hold / peak reset ..• Two shunt resistors /direct analog amplifier output ..• USB communications port..• Up to Fifth order Polynomial calibration profiles mailto:lisa.s.armes.civ@army.mil mailto:taylor.c.siskoff.civ@army.mil

TUZ-225-001-01

CLEVIS PIN SET FOR 225K UCM FOR DILLON EDX-100T; MSI 7300; STRAIGHTPOINT

RLP100T/LLP100T

TUZ-225-001-08

CLEVIS PIN SET FOR 225K UCM FOR EILON RON 2000/2501 S100

TU-225-001

Basic 225k Clevis for use with 225K Quick Change Tension member set.

TMA-225-10-2.438

TENSION MEMBER ASSEMBLY FOR 225K UCM

NOTE

Reference Standard Adapters (Below)

CG-15-6.000-4.500-01

4.500 Alignment Ring for use with CG-10-6.000-(0.750-16)-01 6" dia. Hardened Upper Bearing Block

CI-1-2.750-01

CI-1-2.750-01 ISO 376 Type Compression Top Adapter for 1MN with 2.750- UNF-2A thread

CA-1-(2.750-8)-01

2.75"-8 Alignment Plug for LC Adapter Plate. Old Part #600037.35

NOTE

Tension Adapters (Below)

TA-225F(1.250-12)

1.250"-12 Female thread adapter for 225k Quick-Change Tension Members; Capacity: 84.5k lbf

TA-225M(1.250-12)

1.250"-12 Male thread adapter for 225k Quick-Change Tension Members; Capacity: 84.5k lbf

1 TA-225F(1.500-12)

1.500"-12 Female thread adapter for 225k Quick-Change Tension Members; Capacity: 126k lbf

1 TA-225M(1.500-12)

1.500"-12 Male thread adapter for 225k Quick-Change Tension Members; Capacity: 126k lbf

1 TA-225F(1.750-12)

1.750"-12 Female thread adapter for 225k Quick-Change Tension Members; Capacity: 176k lbf

1 TA-225M(1.750-12)

1.750"-12 Male thread adapter for 225k Quick-Change Tension Members; Capacity: 176k lbf

NOTE

Compression Adapters (Below)

1 UC-100-051-01

3/4"-16UNF-2A, 7/8" Ball Seat for 30k+ UCMs, capacity: 100k lbf Old Part # 600006.03

1 UC-100-051-02

3/4"-16UNF-2A, 5/8" Ball Seat for UCM's Capacity: 60k and 100k lbf Old Part # 600006.02

1 CCE-1-(1.250-12)-01

1.25"-12 female Ball Adapter, capacity: 60k lbf, Ball Dia. 5/8"..Old Part # 600082.03

1 CCE-1-(1.500-12)-01

1.5"-12 female Ball Adapter, capacity: 60k lbf, Ball Dia. 5/8"..Old Part # 600082.15

1 CCE-1-(1.750-12)-01

1.75"-12 female Ball Adapter, capacity: 100k lbf, Ball Dia. 7/8"..Old Part # 600082.04

1 CA-1-(1.250-12)-01

1.25"-12 Alignment Plug for LC Adapter Plate..Old Part # 600037.08

CA-1-(1.500-12)-01

1.5"-12 Alignment Plug for LC Adapter Plate..Old Part # 600037.12

1 CA-1-(1.750-12)-01

1.75"-12 Alignment Plug for LC Adapter Plate..Old Part # 600037.09

This RFI will utilize NAICS Code 334516.

11. Place of Contract Performance: Redstone Arsenal, AL

12. Set Aside: TBD

13. Responses: Interested parties are requested to respond to this RFI with a white paper.

White papers in Microsoft Word for Office 2000 compatible format are 21 April 2025 at 2:00pm CST (Central Standard Time). Responses shall be limited to 3 pages and submitted via e-mail only to the Points of Contact provided above. Proprietary information, if any, should be minimized and MUST BE CLEARLY MARKED. To aid the Government, please segregate proprietary information. Please be advised that all submissions become Government property and will not be returned. The following information must be included in the response:

1. Full company name.

2. Identify business size

3. Identify Socio-economic status as applicable.

4. Include Point of Contacts (POCs): name, position, office and mobile telephone numbers and email address.

The response date for this market research is 21 April 2025. No phone calls will be accepted. All responses to this RFI may be submitted via e-mail to the following POCs: Lisa Armes, Contracting Officer at lisa.s.armes.civ@army.mil & Taylor Siskoff, Contract Specialist at taylor.c.siskoff.civ@army.mil mailto:lisa.s.armes.civ@army.mil mailto:taylor.c.siskoff.civ@army.mil