Req 11035 Purchase Specification 10 Aug 2023.pdf
PDF 110 KB Posted
- Solicitation number
- FA822423Q0015-WFL
About this file
This document outlines a purchase specification from the United States Air Force for purge fluid to be delivered to Hill Air Force Base in Utah. The contractor shall deliver 15,000 gallons of purge fluid conforming to Mil-Spec MIL-PRF-38299E Table 1 to Hill AFB, and provide equipment for offloading including a 3-inch cam-lock fitting compatible with the base's holding tanks, as well as 20 feet of approved hosing. At least 24 hours prior to delivery, the contractor must contact the government point of contact to provide the driver's license of the delivery driver, who must be able to pass a security check, in order to access the base through the Roy gate. The purchase specification also lists requirements such as shipping in a tanker trailer along with certifications and safety data sheets, delivery location and point of contact information, and delivery windows of Monday through Thursday between 6:00 and 13:00 local time.
This document relates to federal contract opportunity number FA822423Q0015-WFL for purge fluid from the Air Force Sustainment Center to support the 576th Precision Surfacing Squadron at Hill Air Force Base.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Solicitation Amendment - FA822423Q00150001.pdf | ||
| Purge Fluid MIL-PRF-38299E.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
United States Air Force – 309th Aircraft Maintenance Group Purchase Specification
PURGE FLUID
1. The Contractor shall deliver to Hill AFB, Utah 15,000 gallons +/- of Purge Fluid that shall conform to Mil-Spec: MIL-PRF-38299E.
a. Part Number M38299 (Must be specific to Table 1 found in MIL-PRF-38299E pages 5-6).
2. Recycling is not required for this shipment.
3. Equipment required for off-loading Purge Fluid into 309 AMXG’s holding tank(s):
a) 3-inch cam-lock quick connect/disconnect pipefitting, compatible with the 309 AMXG holding tank(s) and system(s).
b) Minimum 20-feet of 3-inch approved fuel/purge fluid hosing with 3-inch Camlock Fittings.
c) As an alternate, tanker shall have the ability to pump from tanker through its own pump into AMXG’s holding tanks in case the 309th AMXG holding tanks’ pump is in-operable
(INOP).
4. At least 24-hours before arrival to Hill AFB in Utah, the contractor must contact the Government’s Point of Contact (POC is listed in 5d below) and provide the delivery driver’s license information in order to be sponsored on Hill AFB through the Roy truck gate entrance only.
5. Acquisition Requirements:
a. Purge Fluid must be shipped in a semi-tanker trailer (no drums or small containers)
b. The following shall be provided:
i. Certificate of Conformance (COC)
ii. Bill of Lading
iii. Safety Data Sheet (SDS)
c. Delivery location:
5875 South Gate Ave.
Hill AFB, Utah 84056
d. Upon arrival the delivery driver will contact the POC:
Brad Sawley (385) 466-7114 or William Dow (801) 389-9879
e. The POC will escort the delivery driver to Purge System tanks within one mile of the Delivery Location for off-loading of the product.
f. Delivery: Three weeks after receipt of the order
g. Delivery times: Monday – Thursday 0600 to NLT 1300 (6:00 am to 1:00 pm MDT)
h. Hill AFB truck entry point: Interstate 15 at Exit 338, Roy, UT (HAFB Roy Gate)
i. Delivery driver shall possess a valid Driver License and the ability to pass a security check.
(end)
File details come from the government source that posted it. Updated .