Redacted_SPEC.pdf

NAVAL SUBMARINE SUPPORT FACILITY (NSSF)

ORIGINATOR: Tim Ledbetter 694-2916

DATE: 14APR2025

1. SCOPE:

1.1 TITLE: CAPSTAN TECHNICAL SUPPORT FOR NSSF

2. REFERENCE/PLANS:

2.1 DWG 545D5100, Schematic, Variable Speed Controller for Capstan Motor

2.2 S9582-B6-MMA-010, Capstan Technical Manual

3. REQUIREMENTS:

Naval Submarine Support Facility (NSSF) requires technical assistance in accordance with reference 2.1 and 2.2 from the Original Equipment Manufacturer (OEM) on Virginia Class Block III Electric Mooring Capstan for post motor and sensor cable replacement. The Contractor as the OEM shall provide the following support.

3.1 Technical and troubleshooting assistance will be conducted on for a duration of three (3) ten (10) hour days at Naval Submarine Base New London in Groton, CT.

3.2 The Contractor shall provide troubleshooting and technical assistance support on as follows:

3.2.1 Turning the Capstan A5 card to the Capstan motor (as required).

3.2.2 Providing recommendations for corrective action if any problems are experienced during capstan troubleshooting and operation.

3.2.3 Contractor shall provide a field service report (Contractor format) that documents conditions found upon arrival, technical assistance provided, recommendations made, and the status of the capstan and controller assembly upon completion of work.

3.2.4 Contractor shall provide all test equipment required to perform capstan troubleshooting and operation.

4. NOTES:

4.1 All work will be conducted on-site at the Naval Submarine Base, Groton, CT.

4.2 For Contractor personnel that do not have a CAC card or a NCACS card, the following is required to obtain DBIDS credentials to gain access the base:

a. Ensure you provide the names of personnel requiring access to the

SUBASE to the RSG POC. RSG will pass the information to the SUBASE Pass and ID office as your government sponsor.

b. Upon arrival at SUBASE, Present valid identification, Real ID Act-compliant state driver's license. If you don’t have a Real ID compliant driver’s license, you can use a passport. If you don’t have a passport you will be required to have an original birth certificate and your social security card (not just your number).

c. Present a completed copy of the SECNAV 5512/1 form to obtain your background check. A copy of SECNAV 5512/1 can be obtained by contacting the

RSG POC.

d. Upon completion of the background check, the Visitor Control Center representative will complete the DBIDS enrollment process, which includes your photo, finger prints, base restrictions, and several other assessments; after all this is done, you will be provided with your new DBIDS credential. You may now proceed to work. The Government assumes no liability for failed background checks and all cost incurred as a result of failed background checks is the responsibility of the Contractor.

5. GFM:

5.1 None