Redacted SOW_Redacted.pdf

GEN3 GSS9000 SIMULATOR REMOVAL & INSTALL

STATEMENT OF WORK (SOW)

1.0 BACKGROUND

The Naval Surface Warfare Center, Dahlgren Division (NSWCDD), requires the removal of the old Simulator system and installation of a replacement.

2.0 APPLICABLE DOCUMENTS

2.1 Original Equipment Manufacturer (OEM) Specifications; and

2.2 Department of Defense Contract Security Classification Specification (DD Form 254).

3.0 REQUIREMENTS

3.1 The Contractor shall disassemble and remove the

3.2 The Contractor shall provide the following:

Quantity Part Number Description

1 PNTX-B-1112

Gen3 GSS9000 with a single RF output as follows - 2 channel cards with 16 channels each - (2) GPS L1 license keys - (1) GPS L2 license key.

1 PNTX-B-0001 Channel card with 16 channels 1 PNTX-3003 GPS L5 license key 1 PNTX-3011 Galileo E1 license key 1 PNTX-3012 Galileo E5ab license key 1 FED-INT3 Onsite Integration by Spirent Federal

1 SimINERTIAL-003 SimINERTIAL with Honeywell HG9900 interface

1 Fed-ISRS-2 Honeywell ISRS-2 Card 2 SF1001-13 FPGA AOC Security Module for PNT-X

3.3 The Contractor shall provide installation of Gen3 GSS9000 and ensure it is fully operational with the additional licenses and features for the constellation and signals.

3.4 The Contractor shall ensure the unit is operating in accordance with OEM specifications.

3.5 The Contractor shall coordinate with the technical point of contact (TPOC) identified below to complete this work.

4.0 PERIOD OF PERFORMANCE

The Period of Performance (POP) for this contract is six (6) months after receipt of the order.

5.0 GOVERNMENT-FURNISHED PROPERTY/MATERIAL/INFORMATION

(GFP/GFM/GFI)

N/A

6.0 SECURITY

6.1 The work to be performed under this SOW is Classified. See attached DD Form 254.

6.1.1 The Department of Defense Contract Security Classification Specification (DD Form

254) provides the security classification requirements for this order. The Contractor shall obtain facility and personnel security clearances at the level required by the Department Industrial Security Program prior to starting to work on tasks requiring clearances. Access to classified spaces and material and generation of classified material shall be in accordance with the attached DD Form 254. Contractor must comply with guidelines specified on the DD254. An interim SECRET (S) clearance is acceptable at time of award so long as a current clearance, respectively, is obtained within 180 calendar days subsequent to award unless further extended by prior written authorization by the Contracting Officer. The Contractor shall submit completed clearance packages within ten (10) calendar days or identification of any increased security requirements.

6.1.2 Execution of this effort under the SOW requires the Contractor to have access to classified information, systems, system data and products, and detailed analyses of systems.

While working on classified tasks, the Contractor shall safeguard all classified materials in accordance with applicable Government and industrial security regulations. The Contractor is responsible for taking Information Security Awareness training annually, via their Facility Security Officer (FSO), as part of the mandatory training requirements.

6.1.3 The contractor shall require access to Communications Security (COMSEC) in order to provide support to the SimSAAS software associated with the GPS simulation unit. (DD Form 254 Block 10a)

6.1.4 Controlled Unclassified Information (CUI) (formerly For Official Use Only (FOUO) and Personally Identifiable Information (PII)) generated and/or provided under this contract shall be safeguarded and marked as specified in DODI 5200.48, Controlled Unclassified Information (CUI), March 6, 2020. (DD Form 254 Block 10j)

6.1.5 The Contractor shall be required to receive and generate classified material in support of updating, troubleshooting and possible repair to the GPS Simulation equipment. (DD Form 254 Block 11c)

6.1.6 The Contractor shall be required to fabricate, modify, or store classified hardware in support of SimSupport services. (DD Form 254 Block 11d)

6.1.7 The contractor shall require an account to Communications Security (COMSEC) in order to provide support to the SimInertial software associated with the GPS simulation unit.(DD Form 254 Block 11h)

6.1.8 The Contractor shall be required to have authorization to utilize Defense Courier Services. (DD Form 254 Block 11k)

6.2 Electronic Spillages

Electronic spillages (ES) are unacceptable and pose a risk to national security. An electronic spillage is defined as classified data placed on an information system (IS), media or hardcopy document possessing insufficient security controls to protect the data at the required classification level, thus posing a risk to national security (e.g., sensitive compartmented information (SCI) onto collateral, Secret onto Unclassified, etc.). The Contractor's performance as it relates to ES will be evaluated by the Government. ES reflects on the overall security posture of the Government and a lack of attention to detail with regard to the handling of classified information of IS security discipline and will be reflected in the Contractor's performance rating. In the event that a Contractor is determined to be responsible for an ES, all direct and indirect costs incurred by the Government for ES remediation will be charged to the Contractor.

NSWCDD Command Security will continue to be responsible for the corrective action plan in accordance with the security guidance reflected on the DOD Contract Security Classification Specification - DD254. Command Security will identify the Contractor facility and Contract number associated with all electronic spillages during the investigation that involve Contractor support. Command Security will notify the Contracts Division with the Contractor facility name and Contract number, incident specifics and associated costs for cleanup. The Contracting Officer will be responsible to work with the Contractor Facility to capture the costs incurred during the spillage clean up. The Contractor is also responsible for taking Information Security Awareness training annually, via their Facility Security Officer (FSO), as part of the mandatory training requirements. If a spillage occurs, additional training will be required to prevent recurrence.

6.3 Portable Electronic Devices (PEDs)

Non-Government and/or personally owned portable electronic devices (PEDs) are prohibited in all NSWCDD buildings with the exception of personally owned cell phones, which are authorized for use in spaces up to and including Controlled Access Areas. The Contractor shall ensure the onsite personnel remain compliant with this PED policy. NSWCDD instruction defines PEDs as the following: any electronic device designed to be easily transported, with the capability to store, record, receive or transmit text, images, video, or audio data in any format via any transmission medium. PED’s include, but are not limited to, pagers, laptops, radios, compact discs and cassette players/recorders. In addition, this includes removable storage media such as flash memory, memory sticks, multimedia cards and secure digital cards, micro-drive modules, ZIP drives, ZIP disks, recordable CDs, DVDs, MP3 players, iPads, digital picture frames, electronic book readers, kindle, nook, cameras, external hard disk drives, and floppy diskettes.

PED’s belonging to an external organization shall not be connected to NSWCDD networks or infrastructure without prior approval from the NSWCDD Information Assurance and Compliance Branch. This approval will be granted using the Temporary Approval Request for Information System (TARIS) form and action tracker process. Personally owned hardware or software shall not be connected or introduced to any NSWCDD hardware, network or information system infrastructure.

6.4 Operations Security (OPSEC)

All Contractors (including Sub-contractors) shall supplement their current security practices by requiring any personnel involved in executing this Contract to complete Government-sponsored and administered Operations Security (OPSEC) training. In addition, all Contractors should be aware of the Critical Information List (CIL) for the department they are supporting as well as the OPSEC plan for NSWCDD. Upon Contract award, all identified Contractors (including Sub-contractors) shall sign a Contractor's conformance statement and submit it to the NSWCDD COR named in block 13 of the attached DD-254 thereby acknowledging that they will meet the requirements of this Contract. The COR shall contact their Department Training Coordinator to schedule key employees to attend the Government-sponsored OPSEC training. The Contractor must immediately notify the Government upon the discovery of any nonconformance with the OPSEC Plan.

7.0 TRAVEL

The Contractor shall be required to travel in performance of this contract. The number of service visits, site trips and types of personnel traveling shall be limited to the minimum required to accomplish work requirements and shall be coordinated with the Technical Point of Contact (TPOC). All travel shall be conducted in accordance with the Federal Travel Regulations (FTR).

Anticipated travel is as follows:

Personnel Number of Trips Location Band 4 Engineer 4 Dahlgren, VA

8.0 TECHNICAL POINT OF CONTACT