RAM-5 Cart - SOW_v2 RAM Transportation Cart.docx

MANUFACTURING OF RAM-5 TRANSPORTATION CARTS

PERFORMANCE-BASED STATEMENT OF WORK

1.0 Scope of Work

The requirements in this document contain the information necessary to manufacture transportation carts for the RAM-5 Project at Naval Surface Warfare Center Indian Head Division.

2.0 Applicable Documents

2.1 General Specifications

Contract Data Requirement Lists as in the attached Form 1423s:

Technical Drawings for Deliverables:

2.2 Conflicting Document Requirements

If there are any conflicts between specifications, drawings, or requirements listed herein, the contractor shall notify the Contracting Officer (KO) and the Technical Point of Contact (TPOC), in writing for interpretation, clarification, and resolution.

3.0 Requirements

3.1 Welding

All welds shall be Dye Penatrant inspected per ASTM E1417 Type II, Method C, or equivalent. Discontinuities exceeding the maximum size permitted by MIL-STD-1907, Grade A, Table III, or equivalent, are unacceptable. The Contractor shall submit a Certificate of Compliance (CDRL A001) as identified on the Form 16 for each drawing.

3.2 Material and Test Certification

The Contractor shall submit a Certificate of Compliance (CDRL A001) and/or a Certificate of Analysis (CDRL A002) as identified on the Form 16 for each drawing.

4.0 Deliverables

The Technical Point of Contact and Contracting Officer (KO) for this contract will approve all deliverables as specified in each individual Delivery Order.

4.1 Documentation

4.1.1 Certificates

All certificates shall include the signature of the Contractor’s representative authorized to make such certification. The Government reserves the right to reject defective hardware submitted if the hardware or documentation does not successfully pass Government inspection or testing. The Contractor shall in such event promptly replace, correct, or repair the rejected hardware at the Contractor’s expense.

4.2 Hardware Delivery

The Contractor shall notify the Contracting Officer 30 business days in advance if the Contractor cannot meet the contract delivery schedule.

The Contractor shall be responsible for coordinating and shipping all the units to the required destination. Delivery address provided below:

Naval Surface Warfare Center Indian Head Division 4522 McMahon Road Bldg. 116, Suite 100 Indian Head, MD 20640