Radio and Antenna Communications Serivce Monitor_Test Set SoN.pdf

136 KB Posted

Attached to
Radio and Antenna Communication Service Monitor/Test Set Offutt AFB
Solicitation number
FA4600_CSMTestSet_FY26
Issued by

About this file

Written by GovTribe AI ·

This is a Statement of Need for a Communications Service Monitor (CSM) / Test Set with supporting equipment required by the 55 Communications Squadron Base Radio workcenter at Offutt Air Force Base.

The requirement specifies procurement of one (1) CSM unit that must support P25 Conventional (Phase 1) with Auto-Test and Alignment capabilities for Motorola APX Series Land Mobile Radios (LMR), and Cable and Antenna Analysis functionality including Distance to Fault, Voltage Standing Wave Ratio (VSWR), and Return Loss testing. The supporting equipment package must include one (1) Short-Open-Load Calibrator, one (1) 10 Amp Current Shunt 0.01 Ohm, two (2) RF Test Cables, and one (1) Hard Transit Carrying Case. The vendor must provide products that meet or exceed all specified requirements. The CSM is intended to significantly reduce technician time spent on routine maintenance operations and ensure consistent, accurate radio alignments for Offutt AFB customers.

View the file

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

STATEMENT OF NEED

Radio and Antenna Communications Service Monitor / Test Set

• This requirement is for one (1) Communications Service Monitor (CSM) / Test Set with supporting equipment for the 55 Communications Squadron (CS) Base Radio work-center at Offutt AFB.

• Provide one (1) CSM and supporting equipment for the required specifications below.

• The items provided shall meet or exceed the following requirements:

• The CSM must have P25 Conventional (Phase 1) with the Auto-Test and Alignment for Motorola APX Series Land Mobile Radios (LMR).

• The CSM must have Cable and Antenna Analysis with the ability to test Distance to Fault, Voltage Standing Wave Ratio (VSWR), and Return Loss.

• Supporting equipment for the CSM would include a Short-Open-Load Calibrator, 10 Amp Current Shunt 0.01 Ohm, 2 RF Cables, and 1 Hard Transit Carrying Case.

• Breakdown of the CSM and supporting equipment:

• One (1) CSM.

• One (1) Short-Open Load Calibrator.

• One (1) 10 Amp Current Shunt 0.01 Ohm.

• Two (2) RF Test Cables.

• One (1) Hard Transit Carrying Case.

4. Vendor shall provide products that meets or exceeds requirements above.

5. The CSM is required to significantly reduce technician time spent on routine maintenance and ensure consistent, accurate radio alignments for Offutt AFB customers.

File details come from the government source that posted it. Updated .