R16PS00670Amend2_Package.pdf

(x)

R16PS00670

x x

1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted ; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGEMENT TO BE RECEIVED AT

THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted , such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

x

Boulder City NV 89005

R30

500 Fir Street Regional Office Lower Colorado Region Bureau of Reclamation

07/12/2016000002

13. THIS ITEM ONLY APPLIES TO MODIFICATION OF CONTRACTS/ORDERS. IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

12. ACCOUNTING AND APPROPRIATION DATA (If required) is not extended.is extended, Items 8 and 15, and returning

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended , by one of the following methods: (a) By completing

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

FACILITY CODE CODE

10B. DATED (SEE ITEM 13)

10A. MODIFICATION OF CONTRACT/ORDER NO.

9B. DATED (SEE ITEM 11)

9A. AMENDMENT OF SOLICITATION NO.

CODE

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code)

7. ADMINISTERED BY (If other than Item 6)CODE 6. ISSUED BY

PAGE OF PAGES

4. REQUISITION/PURCHASE REQ. NO.3. EFFECTIVE DATE2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO. (If applicable)

1. CONTRACT ID CODE

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

07/12/2016

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority) appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

E. IMPORTANT: Contractor is not, is required to sign this document and return __________________ copies to the issuing office.

ORDER NO. IN ITEM 10A.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

NAICS: 333999, All Other Miscellaneous General Purpose Machinery Manufacturing

Project Title: Stainless Steel Ball Type Duplex Basket Strainers for Hoover Dam - IDIQ

Purpose of Amendment: The purpose of this amendment is to 1) add the FAR Clause 52.216-3, Economic Price Adjustment--Semistandard Supplies, 2) remove the example of an acceptable item (it does not meet the Trade Agreements Act or Nonmanufacturer Rule requirements), and

3) extend the offer due date to Monday, August 1, 2016 at 12:00 P.M., PT.

Acknowledgement of Amendment: See Block 11 above, regarding how to acknowledge this amendment. The acknowledgement must be received at the place designated for receipt of offers.

Continued ...

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)15A. NAME AND TITLE OF SIGNER (Type or print)

15C. DATE SIGNED 16B. UNITED STATES OF AMERICA 15B. CONTRACTOR/OFFEROR 16C. DATE SIGNED

(Signature of person authorized to sign) (Signature of Contracting Officer)

Meagan R. Fyffe

STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA

FAR (48 CFR) 53.243

NSN 7540-01-152-8070

Previous edition unusable

Except as provided herein, all terms and conditions of the document referenced in Item 9 A or 10A, as heretofore changed, remains unchanged and in full force and effect .

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

NAME OF OFFEROR OR CONTRACTOR

2 2

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

(A) (B) (C) (D) (E) (F)

R16PS00670/000002

Offer Modification: See Block 11 above, if you have submitted your offer and now desire to modify or withdraw it.

Legacy Doc #: BOR

Period of Performance: 08/01/2016 to 07/30/2021

Determination of award will be based on the lowest-priced, responsive quote, received from a responsible offeror. All offerors must include the following with their offer: 1) Completed

Salient Characteristics Confirmation Form, 2) Cut sheet(s) for all items quoted, 3) Completed

Pricing Schedule (including any relevant delivery information, e.g. lead time).

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

Sponsored by GSA

FAR (48 CFR) 53.110

R16PS00670 - Stainless Steel Ball Type Duplex Basket Strainers for Hoover Dam - IDIQ Combined Synopsis/Solicitation

Amendment 2 - 07/26/2016 - The purpose of this amendment is to 1) add the FAR Clause 52.216-3, Economic Price Adjustment--Semistandard Supplies, 2) remove the example of an acceptable item (it does not meet the Trade Agreements Act or Nonmanufacturer Rule requirements), and 3) extend the offer due date to Monday, August 1, 2016 at 12:00 P.M., PT.

Amendment 1 - 07/21/2016 - The purpose of this amendment is to extend the offer due date to Monday, July 25, 2016 at 12:00 P.M., PT. There are no changes to the specifications.

(i) This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued.

(ii) To facilitate electronic quote submissions through FedBizOpps, a request for quote (RFQ No.

R16PS00670) is being issued subsequent to this combined solicitation/synopsis. (The RFQ and all associated documents may be found by going to the following website: https://www.fedconnect.net/, then clicking on “Search Public Opportunities Only”, and then searching by “Reference Number”

R16PS00670.

(iii) This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular number 2005-88.

(iv) This requirement is a total small business set-aside. The North American Industry Classification System (NAICS) Code for this acquisition is: 333999 ‐ All Other Miscellaneous General Purpose Machinery Manufacturing. The small business size standard for NAICS Code 333999 is 500 employees.

(v) The Bureau of Reclamation, Lower Colorado Dams Office, needs various sizes of Stainless Steel Duplex Strainers to be delivered on an as-needed basis. Strainer baskets capture large size invasive species (quaggas) to prevent clogging water-cooled heat exchangers forcing equipment out of service.

Ball Type Duplex Basket Strainer Specifications (see attachment posted at https://www.fedconnect.net/):

1 inch Pipe Size -- -Stainless steel body and baskets -Strainers with two isolated chambers allows one to remain in service while the clogged chamber basket is cleaned -Threaded 1” NPT connectors -5/32” perforations in the stainless steels baskets -ASTM A-351 grade CF8M stainless steel metal alloy in strainers -Removable diverter cartridge seals and isolate the basket chambers during cleaning -One (1) drain plug per basket -Seat/seal materials shall be compatible with stainless steel (example TFE/Viton) -Standard foot mounting pads -ANSI Class 150 -Inlet/outlet connections per ANSI Standards -Pressure rate shall be a minimum of 120psi at 150 degrees F -Max. working pressure: 200 PSI at 150 degrees F (13.8 BAR at 65.5 degrees C).

-Strainer handle's position indicates which basket well is in operation (safety feature).

-Approximate weight 1” threaded (model 53BTX) = 41 pounds, assembled -An example of an acceptable product is EATON ball type duplex basket strainer, Model 53BTX, 1” size

2 inch Pipe Size -- -Stainless steel body and baskets -Strainers with two isolated chambers allows one to remain in service while the clogged chamber basket is cleaned -2" flange (150 psi) end connections -5/32” perforations in the stainless steels baskets -ASTM A-351 grade CF8M stainless steel metal alloy in strainers -Removable diverter cartridge seals and isolate the basket chambers during cleaning -One (1) drain plug per basket -Seat/seal materials shall be compatible with stainless steel (example TFE/Viton) -Standard foot mounting pads -ANSI Class 150 -Inlet/outlet connections per ANSI Standards -Pressure rate shall be a minimum of 120psi at 150 degrees F -Max working pressure: 200 PSI @ 150 degrees F (13.8 BAR @ 65.5 degrees C).

-Strainer handle's position indicates which basket well is in operation (safety feature).

-Approximate weight 2" Flange (model 52BTX) = 185 pounds, assembled -An example of an acceptable product is EATON ball type duplex basket strainer, Model 53BTX, 2” size

3 inch Pipe Size -- -Stainless steel body and baskets -Strainers with two isolated chambers allows one to remain in service while the clogged chamber basket is cleaned -3” flange connectors -5/32” perforations in the stainless steels baskets -ASTM A-351 grade CF8M stainless steel metal alloy in Eaton Strainers -Removable diverter cartridge seals and isolates the basket chambers during cleaning -One (1) drain plug per basket -Seat/seal materials shall be compatible with stainless steel (example TFE/Viton) -Standard foot mounting pads -ANSI Class 150 -Inlet/outlet connections per ANSI Standards -Pressure rate shall be a minimum of 120psi at 150 degrees F -Max. working pressure: 200 PSI at 150 degrees F (13.8 BAR at 65.5 degrees C).

-Strainer handle's position indicates which basket well is in operation (safety feature).

-Approximate weight 3" Flange (53BTX) = 432 pounds, assembled -An example of an acceptable product is EATON ball type duplex basket strainer, Model 53BTX, 3” size

4 inch Pipe Size -- -Stainless steel body and baskets -Strainers with two isolated chambers allows one to remain in service while the clogged chamber basket is cleaned -4” flange connectors -5/32” perforations in the stainless steels baskets -ASTM A-351 grade CF8M stainless steel metal alloy in Eaton Strainers -Removable diverter cartridge seals and isolates the basket chambers during cleaning -One (1) drain plug per basket -Seat/seal materials shall be compatible with stainless steel (example TFE/Viton)

-Standard foot mounting pads -ANSI Class 150 -Inlet/outlet connections per ANSI Standards -Pressure rate shall be a minimum of 120psi at 150 degrees F -Max. working pressure: 200 PSI at 150 degrees F (13.8 BAR at 65.5 degrees C).

-Strainer handle's position indicates which basket well is in operation (safety feature).

-Approximate weight 4" Flange (53BTX) = 432 pounds, assembled -An example of an acceptable product is EATON ball type duplex basket strainer Model 53BTX, 4” size

6 inch Pipe Size -- -Stainless steel body and baskets -Strainer with two isolated chambers to allow one to remain in service while the clogged chamber strainer is cleaned -6” flange connectors -5/32” perforations in the stainless steels baskets -ASTM A-351 grade CF8M stainless steel metal alloy in Eaton Strainers -Includes diverter cartridge to seal and isolate the basket chambers during cleaning -One (1) drain plug per basket -Seat/seal materials shall be compatible with stainless steel (example TFE/Viton) -Pressure rate shall be a minimum of 120psi at 150 degrees F -Standard foot mounting pads -ANSI Class 150 -Inlet/outlet connections per ANSI Standards.

-Max. working pressure: 200 PSI at 150 degrees F (13.8 BAR at 65.5 degrees C).

-Strainer handle's position indicates which basket well is in operation (safety feature).

-Approximate weight 6" Flange (model 50) = 615 pounds, assembled -An example of an acceptable product is EATON ball type duplex basket strainer, Model 50, 6” size

Delivery: All items shall be delivered to the Hoover Dam Central Warehouse, Boulder City, NV.

Offerors shall provide pricing (which includes shipping) with yearly unit prices for each size strainer, as follows (see price schedule in attachment posted at https://www.fedconnect.net/):

CLIN 0010 - Price Schedule 1 - Year One (Est. 08/01/2016 - 07/30/2017), see price schedule in attachment posted at https://www.fedconnect.net/ Item No. 1-1, 1” Stainless Steel Duplex Strainer Item No. 1-2, 2” Stainless Steel Duplex Strainer Item No. 1-3, 3” Stainless Steel Duplex Strainer Item No. 1-4, 4” Stainless Steel Duplex Strainer Item No. 1-5, 6” Stainless Steel Duplex Strainer

CLIN 0020 - Price Schedule 2 - Year Two (Est. 08/01/2017 - 07/30/2018), see price schedule in attachment posted at https://www.fedconnect.net/ Item No. 2-1, 1” Stainless Steel Duplex Strainer Item No. 2-2, 2” Stainless Steel Duplex Strainer Item No. 2-3, 3” Stainless Steel Duplex Strainer Item No. 2-4, 4” Stainless Steel Duplex Strainer Item No. 2-5, 6” Stainless Steel Duplex Strainer

CLIN 0030 - Price Schedule 3 - Year Three (Est. 08/01/2018 - 07/30/2019), see price schedule in attachment posted at https://www.fedconnect.net/ Item No. 3-1, 1” Stainless Steel Duplex Strainer

Item No. 3-2, 2” Stainless Steel Duplex Strainer Item No. 3-3, 3” Stainless Steel Duplex Strainer Item No. 3-4, 4” Stainless Steel Duplex Strainer Item No. 3-5, 6” Stainless Steel Duplex Strainer

CLIN 0040 - Price Schedule 4 - Year Four (Est. 08/01/2019 - 07/30/2020), see price schedule in attachment posted at FedConnect.net Item No. 4-1, 1” Stainless Steel Duplex Strainer Item No. 4-2, 2” Stainless Steel Duplex Strainer Item No. 4-3, 3” Stainless Steel Duplex Strainer Item No. 4-4, 4” Stainless Steel Duplex Strainer Item No. 4-5, 6” Stainless Steel Duplex Strainer

CLIN 0050 - Price Schedule 5 - Year Five (Est. 08/01/2020 - 07/30/2021), see price schedule in attachment posted at https://www.fedconnect.net/ Item No. 5-1, 1” Stainless Steel Duplex Strainer Item No. 5-2, 2” Stainless Steel Duplex Strainer Item No. 5-3, 3” Stainless Steel Duplex Strainer Item No. 5-4, 4” Stainless Steel Duplex Strainer Item No. 5-5, 6” Stainless Steel Duplex Strainer

*Price Schedule Attachment Note: Unit pricing is required on all lines, even if estimated quantity is zero, as these quantities are subject to change.

In addition, Reclamation intends to award the first Delivery Order upon award. The unit prices from Price Schedule 1 will be used in the order.

(vi) The Bureau of Reclamation has a requirement for a contractor to deliver varying sizes of stainless steel duplex strainers, in accordance with the specifications, on an as-needed basis.

(vii) The performance period is estimated to be August 1, 2016 through July 30, 2021. All deliveries shall be made to Bureau of Reclamation, Hoover Dam Central Warehouse, South U.S. Highway 93, SR 172, Boulder City, NV, 89005. Deliveries will be accepted between 7:30 A.M. to 3:30 P.M., Pacific Time, Monday through Friday only, excluding Federal Holidays.

The following clauses and provisions are applicable to this commercial item acquisition:

(viii) FAR provision 52.212-1, Instructions to Offerors - Commercial Items

(ix) Determination of award will be based on the lowest-priced, responsive quote, received from a responsible offeror. The offeror must meet all of the listed salient characteristics in order to be considered responsive.

All offerors must include the following with their offer: 1) Completed Salient Characteristics Confirmation Form, 2) Cut sheet(s) for all items quoted, and 3) Completed Pricing Schedule (including any relevant delivery information, e.g. lead time). All documents are attached to the RFQ at https://www.fedconnect.net/.

In order to determine the responsibility of the Offeror, the Government has the right to contact former customer and Government agencies, and other private/public sources of information. The Government may also use past performance information obtained from other than the sources identified by the Offeror.

Information obtained from the Past Performance Information Retrieval System (PPIRS) database located at https://www.ppirs.gov/ is one of the sources that will be utilized.

(x) FAR provision 52.212-3, Offeror Representations and Certifications - Commercial Items Offerors are advised include with their offer, a completed copy of the provision 52.212-3, or indicate completion of the provision online. Offerors may complete the annual representations and certifications online at https://www.sam.gov/.

(xi) FAR clause 52.212-4, Contract Terms and Conditions - Commercial Items.

(xii) FAR clause 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items.

The following additional FAR clauses cited in this clause are applicable to the acquisition:

52.203-6, Restrictions on Subcontractor Sales to the Government, Alternate I 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Award 52.209-6, Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment 52.219-6, Notice of Total Small Business Aside 52.219-13, Notice of Set-Aside of Orders 52.219-14, Limitations on Subcontracting 52.219-28, Post Award Small Business Program Rerepresentation 52.222-3, Convict Labor 52.222-19, Child Labor-Cooperation with Authorities and Remedies 52.222-21, Prohibition of Segregated Facilities 52.222-26, Equal Opportunity 52.222-35, Equal Opportunity for Veterans 52.222-36, Equal Opportunity for Workers with Disabilities 52.222-37, Employment Reports on Veterans 52.222-40, Notification of Employee Rights Under the National Labor Relations Act 52.222-50, Combating Trafficking in Persons 52.223-18, Encouraging Contractor Policies to Ban Text Messaging while Driving 52.225-5, Trade Agreements 52.225-13, Restrictions on Certain Foreign Purchases 52.232-29, Terms for Financing of Purchases of Commercial Items 52.232-33, Payment by Electronic Funds Transfer-System for Award Management

(xiii) Additional contract requirements include the following clauses and provisions:

- 52.203-98, Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements-Representation (Deviation)

- 52.203-99, Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements (Deviation)

- 52.216-3, Economic Price Adjustment--Semistandard Supplies

- 52.216-18, Ordering

- 52.216-19, Order Limitations

- 52.216-22, Indefinite Quantity

- 52.232-40, Providing Accelerated Payment to Small Business Subcontractors

- 52.242-15, Stop-Work Order

- 52.252-2, Clauses Incorporated by Reference

- 52.252-6, Authorized Deviations in Clauses

- 1452.215-71, Use and Disclosure of Proposal Information-Department of the Interior

- 1452.211-80, Notice of Intent to Acquire Metric Products and Services-Bureau of Reclamation

- DOI-AAAP-0028, Electronic Invoicing and Payment Requirements-Invoice Processing Platform (IPP)

- Minimum and Maximum Ordering Quantities (IDIQ Contract)-Bureau of Reclamation-Lower Colorado Region

Clauses and provisions attachment included at https://www.fedconnect.net/ in order to show relevant fill-in text, under certain applicable clauses.

(xiv) Not Applicable

(xv) All questions shall be submitted via email to jschilke@usbr.gov no later than Friday, July 15, 2016 by 4:00 P.M., PT.

Offers are due Monday, July 25August 1, 2016 by 12:00 P.M., PT. Responsible offerors are requested to submit a quote for this requirement. Offers shall be submitted electronically through FedBizOpps or via email to jschilke@usbr.gov. All offerors must include the following with their offer: 1) Completed Salient Characteristics Confirmation Form, 2) Cut sheet(s) for all items quoted, and 3) Completed Pricing Schedule. All documents are attached to the RFQ at https://www.fedconnect.net/.

(xvi) The Point of Contact for this solicitation is Ms. Jennalyn Schilke. She may be reached via e-mail at jschilke@usbr.gov, or by phone at 702-293-8030.

Clauses & Provisions

Document No.

R16PS00670

Amendment 0002

Document Title

Stainless Steel Ball Type Duplex Basket Strainers for Hoover - IDIQ

CLAUSES

52.252-2 CLAUSES INCORPORATED BY REFERENCE - (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): FAR Clauses – https://www.acquisition.gov/far/

52.252-6 AUTHORIZED DEVIATIONS IN CLAUSES - (APR 1984)

(a) The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter 1) clause with an authorized deviation is indicated by the addition of “(DEVIATION)” after the date of the clause.

(b) The use in this solicitation or contract of any Department of the Interior Acquisition Regulation (48 CFR Chapter 14) clause with an authorized deviation is indicated by the addition of “(DEVIATION)” after the name of the regulation.

52.212-4 CONTRACT TERMS AND CONDITIONS –COMMERCIAL ITEMS - (MAY 2015)

ADDENDUM TO 52.212-4

52.232-40 PROVIDING ACCELERATED PAYMENTS TO SMALL BUSINESS SUBCONTRACTORS -

(DEC 2013)

ADDENDUM TO 52.212-4

52.242-15 STOP-WORK ORDER - (AUG 1989)

ADDENDUM TO 52.212-4

DOI-AAAP-0028 ELECTRONIC INVOICING AND PAYMENT REQUIREMENTS-INVOICE

PROCESSING PLATFORM (IPP) - APR 2013)

Payment requests must be submitted electronically through the U. S. Department of the Treasury's Invoice Processing Platform System (IPP).

'Payment request' means any request for contract financing payment or invoicing payment by the Contractor. To constitute a proper invoice, the payment request must comply with the requirements identified in the applicable Prompt Payment clause included in the contract, or the clause 52.212-4 Contract Terms and Conditions-Commercial Items included in commercial item contracts. The IPP website address is: https://www.ipp.gov.

Under this contract, the following documents are required to be submitted as an attachment to the IPP invoice:

Copy of Contractor-Generated Invoice________

The Contractor must use the IPP website to register access and use IPP for submitting requests for payment. The Contractor Government Business Point of Contact (as listed in SAM) will receive enrollment instructions via email from the Federal Reserve Bank of Boston (FRBB) within 3-5 business days of the contract award date. Contractor assistance with enrollment can be obtained by contacting the IPP Production Helpdesk via email ippgroup@bos.frb.org or phone (866) 973-3131.

Document No.

R16PS00670

Amendment 0002

Document Title

Stainless Steel Ball Type Duplex Basket

If the Contractor is unable to comply with the requirement to use IPP for submitting invoices for payment, the Contractor must submit a waiver request in writing to the Contracting Officer with its proposal or quotation.

ADDENDUM TO 52.212-4

52.216-3 ECONOMIC PRICE ADJUSTMENT--SEMISTANDARD SUPPLIES (JAN 1997)

(a) The Contractor warrants that the supplies identified in the Schedule are, except for modifications required by the contract specifications, supplies for which it has an established price. The term "established price" means a price that (1) is an established catalog or market price for a commercial item sold in substantial quantities to the general public, and (2) is the net price after applying any standard trade discounts offered by the Contractor. The Contractor further warrants that, as of the date of this contract any difference between the unit prices stated in the contract for these line items and the Contractor's established prices for like quantities of the nearest commercial equivalents are due to compliance with contract specifications and with any contract requirements for preservation, packaging, and packing beyond standard commercial practice.

(b) The Contractor shall promptly notify the Contracting Officer of the amount and effective date of each decrease in any applicable established price. Each corresponding contract unit price (exclusive of any part of the unit price that reflects modifications resulting from compliance with specifications or with requirements for preservation, packaging, and packing beyond standard commercial practice) shall be decreased by the same percentage that the established price is decreased. The decrease shall apply to those items delivered on and after the effective date of the decrease in the Contractor's established price, and this contract shall be modified accordingly.

(c) If the Contractor's applicable established price is increased after the contract date, the corresponding contract unit price (exclusive of any part of the unit price resulting from compliance with specifications or with requirements for preservation, packaging, and packing beyond standard commercial practice) shall be increased, upon the Contractor's written request to the Contracting Officer, by the same percentage that the established price is increased, and the contract shall be modified accordingly, subject to the following limitations:

(1) The aggregate of the increases in any contract unit price under this clause shall not exceed 10 percent of the original contract unit price.

(2) The increased contract unit price shall be effective (i) on the effective date of the increase in the applicable established price if the Contracting Officer received the Contractor's written request within 10 days thereafter or (ii) if the written request is received later, on the date the Contracting Officer receives the request.

(3) The increased contract unit price shall not apply to quantities scheduled under the contract for delivery before the effective date of the increased contract unit price, unless failure to deliver before that date results from causes beyond the control and without the fault or negligence of the Contractor, within the meaning of the Default clause.

(4) No modification increasing a contract unit price shall be executed under this paragraph (c) until the Contracting Officer verifies the increase in the applicable established price.

(5) Within 30 days after receipt of the Contractor's written request, the Contracting Officer may cancel, without liability to either party, any undelivered portion of the contract items affected by the requested increase.

Document No.

R16PS00670

Amendment 0002

Document Title

Stainless Steel Ball Type Duplex Basket

(d) During the time allowed for the cancellation provided for in subparagraph (c)(5) above, and thereafter if there is no cancellation, the Contractor shall continue deliveries according to the contract delivery schedule, and the Government shall pay for such deliveries at the contract unit price, increased to the extent provided by paragraph (c) above.

ADDENDUM TO 52.212-4

52.216-18 ORDERING OCTOBER 1995

(a) Any supplies and services to be furnished under this contract shall be ordered by issuance of delivery orders or task orders by the individuals or activities designated in the Schedule. Such orders may be issued from August 1, 2016 through July 30, 2021.

(b) All delivery orders or task orders are subject to the terms and conditions of this contract. In the event of conflict between a delivery order or task order and this contract, the contract shall control.

(c) If mailed, a delivery order or task order is considered "issued" when the Government deposits the order in the mail. Orders may be issued orally, by facsimile, or by electronic commerce methods only if authorized in the Schedule.

ADDENDUM TO 52.212-4

52.216-19 ORDER LIMITATIONS OCTOBER 1995

(a) Minimum order. When the Government requires supplies or services covered by this contract in an amount of less than $3,500.00, the Government is not obligated to purchase, nor is the Contractor obligated to furnish, those supplies or services under the contract.

(b) Maximum order. The Contractor is not obligated to honor:

(1) Any order for a single item in excess of $150,000;

(2) Any order for a combination of items in excess of $300,000; or

(3) A series of orders from the same ordering office within 30 days that together call for quantities exceeding the limitation in subparagraph (1) or (2) above.

(c) If this is a requirements contract (i.e., includes the Requirements clause at subsection 52.216-21 of the Federal Acquisition Regulation (FAR)), the Government is not required to order a part of any one requirement from the Contractor if that requirement exceeds the maximum-order limitations in paragraph

(b) above.

(d) Notwithstanding paragraphs (b) and (c) above, the Contractor shall honor any order exceeding the maximum order limitations in paragraph (b), unless that order (or orders) is returned to the ordering office within 15 days after issuance, with written notice stating the Contractor's intent not to ship the item (or items) called for and the reasons. Upon receiving this notice, the Government may acquire the supplies or services from another source.

ADDENDUM TO 52.212-4

52.216-22 INDEFINITE QUANTITY OCTOBER 1995

(a) This is an indefinite-quantity contract for the supplies or services specified, and effective for the period stated, in the Schedule. The quantities of supplies and services specified in the Schedule are estimates only and are not purchased by this contract.

Document No.

R16PS00670

Amendment 0002

Document Title

Stainless Steel Ball Type Duplex Basket

(b) Delivery or performance shall be made only as authorized by orders issued in accordance with the Ordering clause. The Contractor shall furnish to the Government, when and if ordered, the supplies or services specified in the Schedule up to and including the quantity designated in the Schedule as the "maximum". The Government shall order at least the quantity of supplies or services designated in the Schedule as the "minimum".

(c) Except for any limitations on quantities in the Order Limitations clause or in the Schedule, there is no limit on the number of orders that may be issued. The Government may issue orders requiring delivery to multiple destinations or performance at multiple locations.

(d) Any order issued during the effective period of this contract and not completed within that period shall be completed by the Contractor within the time specified in the order. The contract shall govern the Contractor's and Government's rights and obligations with respect to that order to the same extent as if the order were completed during the contract's effective period; provided that the Contractor shall not be required to make any deliveries under this contract after December 29, 2021.

ADDENDUM TO 52.212-4

MINIMUM AND MAXIMUM ORDERING QUANTITIES (INDEFINITE DELIVERY, INDEFINITE

QUANTITY CONTRACT)--BUREAU OF RECLAMATION-LOWER COLORADO REGION

The Government will order and the contractor shall furnish at least the minimum and not to exceed the following maximum quantity of supplies or services during the term of this contract:

GUARANTEED MINIMUM (over 5 year term): $70,000.00

NOT TO EXCEED MAXIMUM (over 5 year term): $440,000.00

Once the Guaranteed Minimum is met, the Government has no further ordering obligations under this contract.

52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR

EXECUTIVE ORDERS – COMMERCIAL ITEMS - (MAR 2016)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

(1) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015)

(2) 52.233-3, Protest After Award (Aug 1996) (31 U.S.C. 3553).

(3) 52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004)(Public Laws 108-77 and 108-78 (19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

[X] (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate I (Oct 1995) (41 U.S.C. 4704 and 10 U.S.C. 2402).

[_] (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509)

[_] (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (June 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

Document No.

R16PS00670

Amendment 0002

Document Title

Stainless Steel Ball Type Duplex Basket

[X] (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Oct 2015) (Pub. L. 109-282) (31 U.S.C. 6101 note).

[_] (5) [Reserved].

[_] (6) 52.204-14, Service Contract Reporting Requirements (Jan 2014) (Pub. L. 111-117, section 743 of Div. C).

[_] (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Jan 2014) (Pub. L. 111-117, section 743 of Div. C).

[X] (8) 52.209-6, Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Oct 2015) (31 U.S.C. 6101 note).

[_] (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Jul 2013) (41 U.S.C. 2313).

[_] (10) [Reserved].

[_] (11)(i) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (Nov 2011) (15 U.S.C. 657a).

[_](ii) Alternate I (Nov 2011) of 52.219-3.

[_] (12)(i) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (Oct 2014) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

[_] (ii) Alternate I (Jan 2011) of 52.219-4.

[_] (13) [Reserved]

[X] (14)(i) 52.219-6, Notice of Total Small Business Set-Aside (Nov 2011) (15 U.S.C. 644).

[_] (ii) Alternate I (Nov 2011).

[_] (iii) Alternate II (Nov 2011).

[_] (15)(i) 52.219-7, Notice of Partial Small Business Set-Aside (June 2003) (15 U.S.C. 644).

[_] (ii) Alternate I (Oct 1995) of 52.219-7.

[_](iii) Alternate II (Mar 2004) of 52.219-7.

[_] (16) 52.219-8, Utilization of Small Business Concerns (Oct 2014) (15 U.S.C. 637(d)(2) and (3)).

[_] (17)(i) 52.219-9, Small Business Subcontracting Plan (Oct 2015) (15 U.S.C. 637(d)(4)).

[_] (ii) Alternate I (Oct 2001) of 52.219-9.

[_] (iii) Alternate II (Oct 2001) of 52.219-9.

[_](iv) Alternate III (Oct 2015) of 52.219-9.

[X] (18) 52.219-13, Notice of Set-Aside of Orders (Nov 2011) (15 U.S.C. 644(r)).

[X] (19) 52.219-14, Limitations on Subcontracting (Nov 2011) (15 U.S.C. 637(a)(14)).

[_] (20) 52.219-16, Liquidated Damages—Subcontracting Plan (Jan 1999) (15 U.S.C. 637(d)(4)(F)(i)).

Document No.

R16PS00670

Amendment 0002

Document Title

Stainless Steel Ball Type Duplex Basket

[_] (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (Nov 2011) (15 U.S.C. 657 f).

[X] (22) 52.219-28, Post Award Small Business Program Representation (Jul 2013) (15 U.S.C. 632(a)(2)).

[_] (23) 52.219-29, Notice of Set-Aside for, or Sole Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns (Dec 2015) (15 U.S.C. 637(m)).

[_](24) 52.219-30, Notice of Set-Aside for, or Sole Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (Dec 2015) (15 U.S.C. 637(m)).

[X] (25) 52.222-3, Convict Labor (June 2003) (E.O. 11755).

[X] (26) 52.222-19, Child Labor—Cooperation with Authorities and Remedies (Feb 2016) (E.O. 13126).

[X] (27) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

[X] (28) 52.222-26, Equal Opportunity (Apr 2015) (E.O. 11246).

[X] (29) 52.222-35, Equal Opportunity for Veterans (Oct 2015)(38 U.S.C. 4212).

[X] (30) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793).

[X] (31) 52.222-37, Employment Reports on Veterans (FEB 2016) (38 U.S.C. 4212).

[X] (32) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496).

[X] (33)(i) 52.222-50, Combating Trafficking in Persons (Mar 2015) (22 U.S.C. chapter 78 and E.O.

13627).

[_] (ii) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

[_] (34) 52.222-54, Employment Eligibility Verification (Oct 2015). (Executive Order 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.)

[_](35)(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA–Designated Items (May 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

[_] (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

[_] (36)(i) 52.223-13, Acquisition of EPEAT®-Registered Imaging Equipment (Jun 2014) (E.O.s 13423 and 13514).

[_](ii) Alternate I (Oct 2015) of 52.223-13.

[_] (37)(i) 52.223-14, Acquisition of EPEAT®-Registered Televisions (Jun 2014) (E.O.s 13423 and 13514).

[_] (ii) Alternate I (Jun 2014) of 52.223-14.

[_] (38) 52.223-15, Energy Efficiency in Energy-Consuming Products (Dec 2007) (42 U.S.C. 8259b).

[_](39)(i) 52.223-16, Acquisition of EPEAT®-Registered Personal Computer Products (Oct 2015) (E.O.s 13423 and 13514).

Document No.

R16PS00670

Amendment 0002

Document Title

Stainless Steel Ball Type Duplex Basket

[_] (ii) Alternate I (Jun 2014) of 52.223-16.

[X] (40) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (Aug 2011) (E.O. 13513).

[_] (41) 52.225-1, Buy American—Supplies (May 2014) (41 U.S.C. chapter 83).

[_] (42)(i) 52.225-3, Buy American—Free Trade Agreements—Israeli Trade Act (May 2014) (41 U.S.C.

chapter 83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, Pub.

L. 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43).

[_] (ii) Alternate I (May 2014) of 52.225-3.

[_] (iii) Alternate II (May 2014) of 52.225-3.

[_] (iv) Alternate III (May 2014) of 52.225-3.

[X] (43) 52.225-5, Trade Agreements (Feb 2016) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

[X] (44) 52.225-13, Restrictions on Certain Foreign Purchases (June 2008) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

[_] (45) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Jul 2013) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

[_] (46) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150).

[_] (47) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C. 5150).

[X] (48) 52.232-29, Terms for Financing of Purchases of Commercial Items (Feb 2002) (41 U.S.C. 4505, 10 U.S.C. 2307(f)).

[_] (49) 52.232-30, Installment Payments for Commercial Items (Oct 1995) (41 U.S.C. 4505, 10 U.S.C.

2307(f)).

[X] (50) 52.232-33, Payment by Electronic Funds Transfer—System for Award Management (Jul 2013) (31 U.S.C. 3332).

[_] (51) 52.232-34, Payment by Electronic Funds Transfer—Other than System for Award Management (Jul 2013) (31 U.S.C. 3332).

[_] (52) 52.232-36, Payment by Third Party (May 2014) (31 U.S.C. 3332).

[_] (53) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a).

[_] (54)(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx. 1241(b) and 10 U.S.C. 2631).

[_] (ii) Alternate I (Apr 2003) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

[_] (1) 52.222-17, Nondisplacement of Qualified Workers (May 2014)(E.O. 13495).

Document No.

R16PS00670

Amendment 0002

Document Title

Stainless Steel Ball Type Duplex Basket

[_] (2) 52.222-41, Service Contract Labor Standards (May 2014) (41 U.S.C. chapter 67).

[_] (3) 52.222-42, Statement of Equivalent Rates for Federal Hires (May 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

[_] (4) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (Multiple Year and Option Contracts) (May 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

[_] (5) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards—Price Adjustment (May 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

[_](6) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment—Requirements (May 2014) (41 U.S.C. chapter 67).

[_](7) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services—Requirements (May 2014) (41 U.S.C. chapter 67).

[_] (8) 52.222-55, Minimum Wages Under Executive Order 13658 (MAR 2016)

[_] (9) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (May 2014) (42 U.S.C.

1792).

[_](10) 52.237-11, Accepting and Dispensing of $1 Coin (Sept 2008) (31 U.S.C. 5112(p)(1)).

(d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records—Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor’s directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(e)(1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1) in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause—

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509).

(ii) 52.219-8, Utilization of Small Business Concerns (Oct 2014) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to

Document No.

R16PS00670

Amendment 0002

Document Title

Stainless Steel Ball Type Duplex Basket small business concerns) exceeds $700,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(iii) 52.222-17, Nondisplacement of Qualified Workers (May 2014) (E.O. 13495). Flow down required in accordance with paragraph (l) of FAR clause 52.222-17.

(iv) 52.222-21, Prohibition of Segregated Facilities (Apr 2015)

(v) 52.222-26, Equal Opportunity (Apr 2015) (E.O. 11246).

(vi) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212).

(vii) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793).

(viii) 52.222-37, Employment Reports on Veterans (FEB 2016) (38 U.S.C. 4212)

(ix) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O.

13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.

(x) 52.222-41, Service Contract Labor Standards (May 2014) (41 U.S.C. chapter 67).

(xi) [X] (A) 52.222-50, Combating Trafficking in Persons (Mar 2015) (22 U.S.C. chapter 78 and E.O 13627).

[_] (2) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O 13627).

(xii) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (May 2014) (41 U.S.C. chapter 67).

(xiii) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (May 2014) (41 U.S.C. chapter 67).

(xiv) 52.222-54, Employment Eligibility Verification (Oct 2015) (E.O. 12989).

(xv) 52.222-55, Minimum Wages Under Executive Order 13658 (MAR 2016)

(xvi) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Jul 2013) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C.

2302 Note).

(xvii) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (May 2014) (42 U.S.C.

1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.

(xviii) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C.

Appx. 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64.

(2) While not required, the Contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations.

ADDENDUM TO 52.212-5

52.203-99 PROHIBITION ON CONTRACTING WITH ENTITIES THAT REQUIRE CERTAIN

INTERNAL CONFIDENTIALITY AGREEMENTS (DEVIATION 2015-02) - (MAR 2015)

(a) The contractor shall not require employees or subcontractors seeking to report fraud, waste, or abuse to sign or comply with internal confidentiality agreements or statements prohibiting or otherwise restricting

Document No.

R16PS00670

Amendment 0002

Document Title

Stainless Steel Ball Type Duplex Basket such employees or subcontractors from lawfully reporting such fraud, waste, or abuse to a designated investigative or law enforcement representative of a Federal department or agency authorized to receive such information.

(b) The contractor shall notify employees that the prohibition and restrictions of any internal confidentiality agreements covered by this clause are no longer in effect.

(c) The prohibition in paragraph (a) of this clause does not contravene requirements applicable to Standard Form 312, Form 4414, or any other form issued by a Federal department or agency governing the nondisclosure of classified information.

(d)(1) In accordance with section 743 of Division E, Title VII, of the Consolidated and Further Continuing Resolution Appropriations Act, 2015 (Pub. L. 113-235), use of funds appropriated (or otherwise made available) under that or any other Act may be prohibited, if the Government determines that the contractor is not in compliance with the provisions of this clause.

(2) The Government may seek any available remedies in the event the contractor fails to comply with the provisions of this clause.

(End of Clause)

**END OF CLAUSES**

Document No.

R16PS00670

Amendment 0002

Document Title

Stainless Steel Ball Type Duplex Basket

PROVISIONS

52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE - (FEB 1998)

This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es):

FAR Provisions – https://www.acquisition.gov/far/

ADDENDUM TO 52.212-1

52.252-5 AUTHORIZED DEVIATIONS IN PROVISIONS - (APR 1984)

(a) The use in this solicitation of any Federal Acquisition Regulation (48 CFR Chapter 1) provision with an authorized deviation is indicated by the addition of “(DEVIATION)” after the date of the provision.

(b) The use in this solicitation of any Department of the Interior Acquisition Regulation (48 CFR Chapter

14) provision with an authorized deviation is indicated by the addition of “(DEVIATION)” after the name of the regulation.

52.212-1 INSTRUCTIONS TO OFFERORS – COMMERCIAL ITEMS - (OCT 2015)

ADDENDUM TO 52.212-1

This addendum replaces the term “offer” with “quote” within the provision at 52.212-1.

ADDENDUM TO 52.212-1

WBR 1452.211-80 NOTICE OF INTENT TO ACQUIRE METRIC PRODUCTS AND SERVICES --

BUREAU OF RECLAMATION - (MAR 1993)

(a) Metric Transition Plan. The Department of the Interior on December 6, 1991, issued a Metric Transition Program (Part 758 Department Manual Chapter 1) to establish and describe the program's policies and responsibilities. The Bureau of Reclamation (Reclamation), has developed a Metric Transition Plan to implement metrication in Reclamation. This plan describes Reclamation's overall strategy for using the metric system, defines general requirements and procedures for carrying out the transition, and details the tasks with milestones for Reclamation offices to complete.

(b) The Omnibus Trade and Competitiveness Act of 1988 (Trade Act).

(1) Section 5164 of Public Law 100-418, the Trade Act, amended the Metric…