Webster_Well_Specs.pdf
PDF 458 KB Posted
- Attached to
- NK-RESIDENTIAL WATER WELL AT WEBSTER DAM
- Solicitation number
- R15PS00243
About this file
Specification and Drawing
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Sol_R15PS00243_Amd_000001.pdf | ||
| Sol_R15PS00243.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Specifications:
Domestic water well located below Webster Dam at the approximate location indicated on Drawing 1. The well shall be constructed in accordance with Kansas Articles 12 and 30 Water Well Standards. The well installation shall include:
Constant pressure variable frequency drive 230 volt pump control, pump, surge protective device, and wiring shall be installed and connected to existing power located within 75 feet of the new well. Electrical supply wiring shall be encased in conduit.
Well head shall be of pit-less design with buried or inside casing pressure tank.
Discharge piping shall be 2 inch diameter polyethylene pipe meeting NSF-14 Standard for Potable Water. All discharge piping connections shall be either brass or stainless steel.
Discharge piping main line shall extend and connect to existing water piping at the Webster Dam residence located approximately 1600 feet to the south. All discharge piping connections shall be a minimum of 2 inch diameter if located on the main line. Soil type is sand and will require plowing in of the discharge line. Discharge piping shall be a minimum of 42 inches deep. See Drawing 1 for details.
A 5 foot bury, freeze proof hydrant with lockable handle shall be installed within 50 feet of the well. Do not reduce mainline diameter when installing the hydrant.
File details come from the government source that posted it. Updated .