QuestionsandAnswers-FA485524Q0033.docx
DOCX document 14 KB Posted
- Attached to
- Laser Engraver
- Solicitation number
- FA485524Q0033
About this file
This document contains questions and answers related to a federal solicitation for a laser engraver. The solicitation is for Cannon AFB in New Mexico, who is seeking a 100-Watt CO2 laser engraver to engrave tools and other equipment. The laser engraver must have a work area of at least 24" x 24" and be able to accommodate material up to 9" thick. The dimensions of the engraver must fit within 41.25" x 32.81" x 38.04" and include a ventilation system. The laser must be a Class 2 laser with a maximum of 1 mW CW at 600-700nm. The customer is open to any brand that can meet their requirements, and higher power lasers are acceptable. The engraver will primarily be used to engrave labels on metal tools, and a rotary attachment is not required.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Attachment 1 - Combo.pdf | ||
| Attachment 2-Provisions and Clauses.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Laser Engraver for Cannon AFB, NM Questions and Answers
Q: Do you have a specific engraver in mind you can you share, if so what is the make and model?
A: Our customer sent a request for an Epilog Fusion Pro 24 Combo, but they are open to any brand that can fit their needs.
Q: 1mW lasers are hard to find in an engraver. Are higher power offerings acceptable?
A: Higher power is acceptable.
Q: Is the space to be occupied by the engraver to be 41.25” Long by 32.81” wide by 38.04” high?
A: Yes, but they have plenty of space and can accommodate bigger sizes.
Q: Do you want to engrave metal or is just marking the metal acceptable? Marking uses a spray that reacts with the laser and bonds to the metal it doesn’t cut into the metal but is still permanent marking.
A: They would like to engrave their tools.
Q: What type of materials are intended to be engraved?
A: This will be used primarily to engrave labels on their metal tools.
Q: Are you looking for rotary attachments as well?
A: Our customer did not specify the need of a rotary attachment.
File details come from the government source that posted it. Updated .